Evaluation of the LTQ-Orbitrap mass spectrometer for the analysis of polymerase chain reaction products

We have investigated the potential and robustness of the off‐line coupling of polymerase chain reaction (PCR) with electrospray ionization mass spectrometry (ESI‐MS), for further applications in the screening of single‐nucleotide polymorphisms (SNPs). This was based on recently reported data demonstrating that anion‐exchange solid‐phase extraction was the most efficient technique for efficiently desalting PCR products, with a recovery of ～70%. Results showed that this purification approach efficiently removes almost all the chemicals commonly added to PCR buffers. ESI‐MS analysis of a model 114‐bp PCR product performed on the LTQ‐Orbitrap instrument demonstrated that detection limits in the nM range along with an average mass measurement uncertainty of 9.15 ± 7.11 ppm can be routinely obtained using an external calibration. The PCR/ESI‐MS platform was able to detect just a few copies of a targeted oligonucleotide. However, it was shown that if two PCR products are present in a mixture in a ratio higher than 10 to 1, the lower abundance one might not be reproducibly detected. Applications to SNPs demonstrated that an LTQ‐Orbitrap with a resolution of 30 000 (at m/z 400) easily identified a single (A ? G) switch, i.e. a 16 Da difference, in binary mixtures of ～ 35 kDa PCR products. Complementary experiments also showed that the combination of endonucleases and ESI‐MS could be used to confirm base composition and sequence, and thus to screen for unknown polymorphisms in specific sequences. For example, a single (T ? A) switch (9 Da mass difference) was successfully identified in a 114‐bp PCR product. Copyright © 2010 John Wiley & Sons, Ltd.     

Rapid detection of the Vibrio cholerae ctx gene in food enrichments using real-time polymerase chain reaction

A real-time polymerase chain reaction (qPCR) assay for the detection of the ctxA gene of toxigenic Vibrio cholerae (Vc) was validated against standard culture techniques. The first experimental phase determined optimal enrichment conditions for detection by culture and qPCR of Vc in shrimp, bottled water, milk, and potato salad. The conditions tested included temperature (35 and 42 degrees C), time (6 and 18 h), and effect of shaking (0 and 100 rpm). No definitive trends were found with enrichment temperature or shaking on Vc isolation frequency or detection by qPCR. Generally, Vc was detected by qPCR more frequently than Vc was isolated, but this difference was significant only in the 35 degrees C 6 h enrichment without shaking. In the second phase of experiments, shrimp, bottled water, milk, potato salad, and oysters were inoculated with each of 3 toxigenic Vc strains (Latin American O1 strain, an O139 strain, and an O1 strain from the U.S. Gulf Coast) and enriched under static conditions at 42OC for 6 and 18 h. Overall, detection frequency of ctx by qPCR was 98% (88/90) and 100% (90/90) after 6 and 18 h enrichments, respectively, while Vc isolation frequency was 87% (78/90) and 83% (75/90) after 6 and 18 h, respectively. Toxigenic Vc can be detected by qPCR within an 8 h work day using the 6 h enrichment procedure, assuming an initial level of at least 1-2 colony-forming units/g; however, overnight enrichment may be necessary to detect lower levels. These data indicate that the qPCR assay for ctx is a more reliable, sensitive, and rapid alternative to standard Vc culture methods and is applicable to diverse food products.     

Human Y-chromosome haplotyping by allele-specific polymerase chain reaction

We describe the application of allele-specific PCR (AS-PCR) for screening biallelic markers, including SNPs, within the nonrecombining region of the human Y-chromosome (NRY). The AS-PCR method is based on the concept that the perfectly annealed primer-template complex is more stable, and therefore, more efficiently amplified under the appropriate annealing temperature than the complex with a mismatched 3'-residue. Furthermore, a mismatched nucleotide at the primer's 3'-OH end provides for a poor extension substrate for Taq DNA polymerase, allowing for discrimination between the two alleles. This method has the dual advantage of amplification and detection of alleles in a single expeditious and inexpensive procedure. The amplification conditions of over 50 binary markers, mostly SNPs, that define the major Y-haplogroups as well as their derived lineages were optimized and are provided for the first time. In addition, artificial restriction sites were designed for those markers that are not selectively amplified by AS-PCR. Our results are consistent with allele designations derived from other techniques such as RFLP and direct sequencing of PCR products.     

Species identification of Crassostrea and Ostrea oysters by polymerase chain reaction amplification of the 5S rRNA gene

A specific multiplex polymerase chain reaction (PCR) was developed for the identification of Crassostrea angulata, C. gigas, Ostrea edulis, and O. stentina oyster species. Universal primers were used for the amplification of complete repetition units of 5S rDNA in each of the 4 species. The alignment of the obtained sequences was the basis for the specific design of species-specific primers (ED1, ED2, ST1, ST2, CR1, and CR2) located in the nontranscribed spacer regions. The different sizes of the species-specific amplicons, separated by agarose gel electrophoresis, allowed identification of Crassostrea and Ostrea species. A multiplex PCR with a set of the 6 designed primers showed that they did not interfere with each other and bound specifically to the DNA target. This genetic marker can be very useful for traceability of the species, application in the management of oyster cultures, and conservation of the genetic resources of the species.     

Aptamer-based polymerase chain reaction for ultrasensitive cell detection

A new system was developed for sensitive and selective detection of tumor cells taking advantage of cell-attached aptamers amplified by PCR and output signals amplified by cationic conjugated polymers.     

A nanoliter rotary device for polymerase chain reaction

Polymerase chain reaction (PCR) has revolutionized a variety of assays in biotechnology. The ability to implement PCR in disposable and reliable microfluidic chips will facilitate its use in applications such as rapid medical diagnostics, food control testing, and biological weapons detection. We fabricated a microfluidic chip with integrated heaters and plumbing in which various forms of PCR have been successfully demonstrated. The device uses only 12 nL of sample, one of the smallest sample volumes demonstrated to date. Minimizing the sample volume allows low power consumption, reduced reagent costs, and ultimately more rapid thermal cycling.     

Fluorochrome-functionalized magnetic nanoparticles for high-sensitivity monitoring of the polymerase chain reaction by magnetic resonance

Easy to find: magnetic nanoparticles bearing fluorochromes (red) that intercalate with DNA (green) form microaggregates with DNA generated by the polymerase chain reaction (PCR). These aggregates can be detected at low cycle numbers by magnetic resonance (MR).     

Selective genotyping of individual cells by capillary polymerase chain reaction

On-line capillary polymerase chain reaction (PCR) coupled with laser-induced fluorescence detection was successfully demonstrated for individual human cells. A single 50 num inner diameter (ID) fused-silica capillary served both as the reaction vessel and for isolating single cells. SYBR Green I dye was added into the reaction mixture for dynamic fluorescence labeling. Because of the small ID of the capillary, PCR-amplified DNA fragments from single cells were localized in the capillary, providing discrete product zones with concentrations at readily detectable levels. With selective primer design, only cells containing the DNA of interest were amplified. By counting the number of peaks in the capillary via electromigration past a detection window, the number of targeted cell templates could be determined. Identification of the 295 bp fragment beta-actin gene from individual human lymphoblast cell was demonstrated. Independent on-column cell counting provided positive correlation between the starting cell templates and the final PCR products. This opens up the possibility of highly selective and sensitive disease diagnosis at an early stage, when only a few cells in the population are defective.     

Separation of polymerase chain reaction amplified bird genes by capillary electrophoresis

Female birds possess one Z and one W chromosome, whereas male birds possess two identical Z chromosomes. Thus, the presence of a W genetic marker is diagnostic of the female sex. Capillary electrophoresis with buffer containing an entangled solution of hydroxyethylcellulose was used to separate the polymerase chain reaction (PCR) amplified bird sexing genes CHD-Z and CHD-W. The relative standard deviations (RSD) were less than 0.6% for the male genes and less than 0.4% for the female genes for six runs and detection limits of 0.1 ng/microL were obtained with laser-induced fluorescence (LIF) detection. Using a DNA ladder and theoretical models for DNA separation in sieving media, the sizes of the two bird genes were determined.     

Development of a novel multiplex polymerase chain reaction system for forensic individual identification using insertion/deletion polymorphisms

Insertion/deletion (InDel) polymorphisms have been widely used in the fields of population genetics, genetic map constructions, and forensic investigations owing to the advantages of their low mutation rates, widespread distributions in the human genome, and small amplicon sizes. In order to provide more InDels with high discrimination power in Chinese populations, we selected and constructed one novel multiplex PCR‐InDel panel for forensic individual identification. Genetic distributions of these 35 InDels in five reference populations from East Asia showed low genetic differentiations among these populations. Forensic efficiency evaluations of these InDels revealed that these loci could perform well for forensic individual identifications in these reference populations. In the meantime, genetic diversities and forensic parameters of these InDels were further investigated in the studied Kazak group. Mean value of polymorphism information content for 35 InDels was 0.3611. Cumulative power of discrimination of 35 InDels was 0.99999999999999603 in Kazak group. Given these results, the panel is suitable for individual identifications in the studied Kazak and these reference populations.     

A low-cost, disposable card for rapid polymerase chain reaction

A low-cost, disposable card for rapid polymerase chain reaction (PCR) was developed in this work. Commercially available, adhesive-coated aluminum foils and polypropylene films were laminated with structured polycarbonate films to form microreactors in a card format. Ice valves [1] were employed to seal the reaction chambers during thermal cycling and a Peltier-based thermal cycler was configured for rapid thermal cycling and ice valve actuation. Numerical modeling was conducted to optimize the design of the PCR reactor and investigate the thermal gradient in the reaction chamber in the direction of sample thickness. The PCR reactor was experimentally characterized by using thin foil thermocouples and validated by a successful amplification of 10 copy of E. coli tuf gene in 27 min.     

A circular ferrofluid driven microchip for rapid polymerase chain reaction

In the past few years, much attention has been paid to the development of miniaturized polymerase chain reaction (PCR) devices. After a continuous flow (CF) PCR chip was introduced, several CFPCR systems employing various pumping mechanisms were reported. However, the use of pumps increases cost and imposes a high requirement on microchip bonding integrity due to the application of high pressure. Other significant limitations of CFPCR devices include the large footprint of the microchip and the fixed cycle number which is dictated by the channel layout. In this paper, we present a novel circular close-loop ferrofluid driven microchip for rapid PCR. A small ferrofluid plug, containing sub-domain magnetic particles in a liquid carrier, is driven by an external magnet along the circular microchannel, which in turn propels the PCR mixture through three temperature zones. Amplification of a 500 bp lambda DNA fragment has been demonstrated on the polymethyl methacrylate (PMMA) PCR microchip fabricated by CO(2) laser ablation and bonded by a low pressure, high temperature technique. Successful PCR was achieved in less than 4 min. Effects of cycle number and cycle time on PCR products were investigated. Using a magnet as the actuator eliminates the need for expensive pumps and provides advantages of low cost, small power consumption, low requirement on bonding strength and flexible number of PCR cycles. Furthermore, the microchip has a much simpler design and smaller footprint compared to the rectangular serpentine CFPCR devices. To demonstrate its application in forensics, a 16-loci short tandem repeat (STR) sample was successfully amplified using the PCR microchip.     

Efficient polymerase chain reaction assisted by metal–organic frameworks

As a powerful tool for obtaining sufficient DNA from rare DNA resources, polymerase chain reaction (PCR) has been widely used in various fields, and the optimization of PCR is still in progress due to the dissatisfactory specificity, sensitivity and efficiency. Although many nanomaterials have been proven to be capable of optimizing PCR, their underlying mechanisms are still unclear. So far, the scientifically compelling and functionally evolving metal–organic framework (MOF) materials with high specific surface area, tunable pore sizes, alterable surface charges and favourable thermal conductivity have not been used for PCR optimization. In this study, UiO-66 and ZIF-8 were used to optimize error-prone two round PCR. The results demonstrated that UiO-66 and ZIF-8 not only enhanced the sensitivity and efficiency of the first round PCR, but also increased the specificity and efficiency of the second round PCR. Moreover, they could widen the annealing temperature range of the second round PCR. The interaction of DNA and Taq polymerase with MOFs may be the main reason. This work provided a candidate enhancer for PCR, deepened our understanding on the enhancement mechanisms of nano-PCR, and explored a new application field for MOFs.

Many new materials have the ability to optimize polymerase chain reaction (PCR). Metal-organic frame materials UiO-66 and ZIF-8 can enhance sensitivity, specificity and efficiency of PCR, indicating their potential as PCR enhancers.     

The use of genetic typing methods to discriminate among strains of Vibrio cholerae, V. parahaemolyticus, and V. vulnificus

This review article summarizes the findings of recent typing studies conducted on Vibrio cholerae, V. parahaemolyticus, and V. vulnificus. The DNA-based methods used to type the Vibrio spp. include whole genome approaches, such as pulsed field gel electrophoresis (PFGE), ribotyping, and repetitive extragenic palindromic (REP)-PCR, single gene targets, and multiple gene targets (multilocus approaches). The goals of these studies include establishing the relatedness of isolates from disease epidemics, discriminating among strains with more or less potential to cause disease or epidemics, and exploring the population biology of these waterborne pathogens. PFGE was consistently among the more discriminatory of the typing methods for all three Vibrio spp., and was useful for tracing the temporal and geographic relatedness of epidemic strains of V. cholerae and V. parahaemolyticus. However, PFGE did not group V. vulnificus strains according to the genotypes that have been proposed as markers of virulence potential. Typing methods that target repetitive elements distributed throughout the genome, such as BOX-PCR and REP-PCR, and DNA sequence-based methods, such as multilocus sequence typing, were also highly discriminatory and, in some cases, superior to PFGE for phylogenetic analysis and identification of strains with high epidemic or virulence potential. As typing methods and strategies are refined and used, the epidemiology, virulence potential, and ecology of these pathogenic Vibrio spp. will become better understood.     

Conductivity detection of polymerase chain reaction products separated by micro-reversed-phase liquid chromatography

In this paper, we describe the application of micro-reversed-phase high-performance liquid chromatography (mu-RP-HPLC) for the separation and/or purification of polymerase chain reaction (PCR) products with detection accomplished using a miniaturized conductivity detector. The conductivity detector used two Pt wires and a bipolar waveform applied to the electrode pair from which the conductivity of the bulk solution could be measured. In the mobile phase used for the mu-RP-HPLC separation of the PCR product, the mass detection limit for herring sperm DNA using conductivity was found to be 11 ng. Efficient separation of the PCR amplicon from the other reagents present in the PCR cocktail was achieved in less than 4 min with a capacity factor of 2.5 and separation efficiency of 9.1 x 10(3) plates. The separation was carried out using reversed-phase ion-pair chromatography with a triethylammonium acetate ion-pairing agent.     

Real-time quantitative polymerase chain reaction methods for four genetically modified maize varieties and maize DNA content in food

Quantitative detection methods are needed for enforcement of the recently introduced labeling threshold for genetically modified organisms (GMOs) in food ingredients. This labeling threshold, which is set to 1% in the European Union and Switzerland, must be applied to all approved GMOs. Four different varieties of maize are approved in the European Union: the insect-resistant Bt176 maize (Maximizer), Btl 1 maize, Mon810 (YieldGard) maize, and the herbicide-tolerant T25 (Liberty Link) maize. Because the labeling must be considered individually for each ingredient, a quantitation system for the endogenous maize content is needed in addition to the GMO-specific detection systems. Quantitative real-time polymerase chain reaction detection methods were developed for the 4 approved genetically modified maize varieties and for an endogenous maize (invertase) gene system.     

An improved electrochemiluminescence polymerase chain reaction method for the detection of Fusarium wilts

An improved electrochemiluminescence polymerase chain reaction （ECL-PCR） method was developed and applied to detect Fusarium wilt. Briefly, the internal transcribed spacer （ITS） sequence of Fusarium oxysporumf, sp Cubense （FOC） was amplified by PCR. Two universal fragments, which were complimentary to Ru（bpy）3^2＋ （TBR） labeled probe and Biotin labeled probe, respectively, were connected to the tail of primers so that all the PCR products got universal sequences. Then biotin labeled probes and TBR labeled probes were hybridized with the PCR products at the same time. Through the specific interaction between biotin and streptavidin, the PCR products were captured by streptavidin coated magnetic bead and then detected by ECL assay. The experiment results showed that the healthy banana samples and infected ones can be discriminated by this ECL-PCR method. This improved ECL-PCR approach is useful in Fusarium wilt detection due to its high sensitivity, simplicity and stability.     

Nanolitre droplet array for real time reverse transcription polymerase chain reaction

Recently, more and more effort has been put into the miniaturization of genetic tests such as quantitative PCR (qPCR), because it is no doubt a powerful tool for molecular diagnosis and quantitative biology. In this paper, we developed a low density nanolitre droplet array generated on a chemical modified silicon chip for gene quantification. Reliable and sensitive two step real time qRT-PCR assay for microRNA measurement was performed within 500 nL droplets. It has a dynamic range of six orders of magnitude, allowing for the quantification of microRNA input from 10(3) to 10(9) copies per reaction. We successfully applied the platform for quantitative measurement of mir-122 across five cultured cell lines. The minimum total RNA input was as low as 1 pg per assay, which showed great potential for gene quantification at single cell level. We envision the droplet based qPCR chip would be a universal and low-cost platform for gene quantification in ordinary biological laboratories.