Dynamic chirality: keen selection in the face of stereochemical diversity in mechanically bonded compounds

The template-directed syntheses, employing bisparaphenylene-[34]crown-10 (BPP34C10), 1,5-dinaphthoparaphenylene-[36]crown-10 (1/5NPPP36C10), and 1,5-dinaphtho-[38]crown-10 (1/5DNP38C10) as templates, of three [2]catenanes, whereby one of the two bipyridinium units in cyclobis(paraquat-p-phenylene) is replaced by a bipicolinium unit, are described. The crude reaction mixtures comprising the [2]catenanes all contain slightly more of the homologous [3]catenanes, wherein a "dimeric" octacationic cyclophane has the crown ether macrocycles encircling the alternating bipyridinium units with the bipicolinium units completely unfettered. X-ray crystallography, performed on all three [2]catenanes and two of the three [3]catenanes reveals co-conformational and stereochemical preferences that are stark and pronounced. Both the [3]catenanes crystallize as mixtures of diastereoisomers on account of the axial chirality associated with the picolinium units in the solid state. Dynamic (1)H NMR spectroscopy is employed to probe in solution the relative energy barriers for rotations by the phenylene and pyridinium rings in the tetracationic cyclophane component of the [2]catenanes. Where there are co-conformational changes that are stereochemically "allowed", crown ether circumrotation and rocking processes are also investigated for the relative rates of their occurrence. The outcome is one whereby the three [2]catenanes containing BPP34C10, 1/5NPPP36C10, and 1/5DNP38C10 exist as one major enantiomeric pair of diastereoisomers amongst two, four, and eight diastereoisomeric pairs of enantiomers, respectively. The diastereoisomerism is a consequence of the presence of axial chirality together with helical and/or planar chirality in the same interlocked molecule. These [2]catenanes constitute a rich reserve of new stereochemical types that might be tapped for their switching and mechanical properties.     

Self-complementary

Three [3]catenanes with cavities large enough to accommodate aromatic guests have been designed and synthesized (yields = 5-20 %) by means of kinetically controlled self-assembly processes. The X-ray structural analysis of one of three [3]catenanes confirmed the presence of a rectangular cavity (dimensions = 7 x 11 A) lined by pi-electron-rich recognition sites and hydrogen-bond acceptor groups. In spite of their apparently ideal recognition features, none of these [3]catenanes bind guests incorporating a pi-electron-deficient bipyridinium unit. However, the template-directed syntheses of the [3]catenanes also produce, in yields of 2-23%, [2]catenanes incorporating a 1,5-dioxynaphtho[38]crown-10 interlocked with a bipyridinium-based tetracationic cyclophane. The X-ray structural analyses of two of these [2]catenanes revealed that a combination of [pi...pi] and [C-H...pi] interactions is responsible for the formation of supramolecular homodimers in the solid state. 1H NMR spectroscopic investigations of the four [2]catenanes demonstrated that supramolecular homodimers are also formed (Ka= 17-31M(-1), T= 185 K) in (CD3)2CO solutions. Dynamic 1H NMR spectroscopy revealed that the 1,5-dioxynaphtho[38]crown-10 and tetracationic cyclophane components in the four [2]catenanes and in the three [3]catenanes circumrotate (deltaGc(not equal to) = 9-14 kcal mol(-1)) through each other's cavity in (CD3)2CO. Similarly, the 1,5-dioxynaphthalene and the bipyridinium ring systems rotate (deltaGc(not equal to) =10-14 kcal mol(-1)) about their [O...O] and [N...N] axes, respectively, in solution.     

Controlling switching in bistable [2]catenanes by combining donor-acceptor and radical-radical interactions

Two redox-active bistable [2]catenanes composed of macrocyclic polyethers of different sizes incorporating both electron-rich 1,5-dioxynaphthalene (DNP) and electron-deficient 4,4'-bipyridinium (BIPY(2+)) units, interlocked mechanically with the tetracationic cyclophane cyclobis(paraquat-p-phenylene) (CBPQT(4+)), were obtained by donor-acceptor template-directed syntheses in a threading-followed-by-cyclization protocol employing Cu(I)-catalyzed azide-alkyne 1,3-dipolar cycloadditions in the final mechanical-bond forming steps. These bistable [2]catenanes exemplify a design strategy for achieving redox-active switching between two translational isomers, which are driven (i) by donor-acceptor interactions between the CBPQT(4+) ring and DNP, or (ii) radical-radical interactions between CBPQT(2(?+)) and BIPY(?+), respectively. The switching processes, as well as the nature of the donor-acceptor interactions in the ground states and the radical-radical interactions in the reduced states, were investigated by single-crystal X-ray crystallography, dynamic (1)H NMR spectroscopy, cyclic voltammetry, UV/vis spectroelectrochemistry, and electron paramagnetic resonance (EPR) spectroscopy. The crystal structure of one of the [2]catenanes in its trisradical tricationic redox state provides direct evidence for the radical-radical interactions which drive the switching processes for these types of mechanically interlocked molecules (MIMs). Variable-temperature (1)H NMR spectroscopy reveals a degenerate rotational motion of the BIPY(2+) units in the CBPQT(4+) ring for both of the two [2]catenanes, that is governed by a free energy barrier of 14.4 kcal mol(-1) for the larger catenane and 17.0 kcal mol(-1) for the smaller one. Cyclic voltammetry provides evidence for the reversibility of the switching processes which occurs following a three-electron reduction of the three BIPY(2+) units to their radical cationic forms. UV/vis spectroscopy confirms that the processes driving the switching are (i) of the donor-acceptor type, by the observation of a 530 nm charge-transfer band in the ground state, and (ii) of the radical-radical ilk in the switched state as indicated by an intense visible absorption (ca. 530 nm) and near-infrared (ca. 1100 nm) bands. EPR spectroscopic data reveal that, in the switched state, the interacting BIPY(?+) radical cations are in a fast exchange regime. In general, the findings lay the foundations for future investigations where this radical-radical recognition motif is harnessed in bistable redox-active MIMs in order to achieve close to homogeneous populations of co-conformations in both the ground and switched states.     

The topological and chemical implications of introducing oriented rings to [3]catenanes

We report the synthesis of three donor–acceptor azido-functionalised catenanes, wherein the asymmetric positioning of the azide group on one or two of the ring components renders its resident macrocycle constitutionally asymmetric, and so it acts as an oriented ring. As a consequence, the analyses of (i) a monoazido[2]catenane, (ii) a monoazido[3]catenane and (iii) a bisazido[3]catenane, which exists as a mixture of two conditional topological isomers, are significantly complicated. Accordingly, characterisation of the catenanes, which was achieved by a combination of dynamic ¹H NMR spectroscopy, mass spectrometry and single crystal X-ray diffraction, is an arduous task. We expect that the difficulties in analysing these mechanically interlocked molecules will be encountered more frequently as chemists prepare entities with increasingly complex topologies.     

Rational Design and Integrative Assembly of Heteromeric Metalla[2]Catenanes Featuring Cp*Ir/Rh Fragments

We report a design strategy for integrative assembly of heteromeric [2]catenanes. The design focuses on the shape and functional group match of two different metalla-rectangles. A series of dipyridyl ligands with different lengths, widths and functional groups were designed and used for assembly experiments. Six heteromeric [2]catenanes were obtained both by direct mixture of two pre-assembled metalla-rectangles and one-pot three-component self-assembly. Multiple analytic methods were employed to characterize the catenanes, including single crystal X-ray diffraction analysis, NMR spectroscopy, mass spectroscopy and elemental analysis.     

Calix[4]arene-based bis[2]catenanes: synthesis and chiral resolution

The exclusive formation of hydrogen-bonded dimers between tetraaryl and tetratosylurea calix[4]arenes has been used to prepare a series of ten "bisloop" tetraurea calix[4]arenes 3, in which adjacent phenylurea groups are covalently linked through alpha,omega-dioxyalkane chains. This dimerization with tetratosylurea 2 as template preorganizes the alkenyl residues of tetra(m-alkenyloxyphenyl) ureas 1 and enables their selective connection in high yield (up to 95 %) by olefin metathesis followed by hydrogenation. The "bisloop" calixarenes 3 also exclusively form heterodimers with 1. Thus, in a separated metathesis/hydrogenation sequence, a series of 14 cyclic bis[2]catenanes 4, in which two calix[4]arenes are connected through their wide rims by two pairs of interlocked rings (total size 29 to 41 atoms), were prepared in yields of up to 97 %. Optical resolution of these chiral bis[2]catenanes was studied by HPLC on chiral stationary phases. The single-crystal X-ray structure of one example (4(P,10)) confirmed the interlocking rings and revealed that the hydrogen-bonded dimeric capsule of the calix[4]arene can be "completely" opened.     

Mechanically Interlocked Chiral Self-Templated [2]Catenanes from 2,6-Bis(1,2,3-triazol-4-yl)pyridine (btp) Ligands

We report the efficient self-templated formation of optically active 2,6-bis(1,2,3-triazol-4-yl)pyridine ( btp ) derived homocircuit [2]catenane enantiomers. This represents the first example of the enantiopure formation of chiral btp homocircuit [2]catenanes from starting materials consisting of a classical chiral element; X-ray diffraction crystallography enabled the structural characterization of the [2]catenane. The self-assembly reaction was monitored closely in solution facilitating the characterization of the pseudo-rotaxane reaction intermediate prior to mechanically interlocking the pre-organised system via ring-closing metathesis.     

Synthesis and Characterization of Two [2]Catenanes Based on Phenylene-diacetylene Crown Ethers

Two charged donor-acceptor [2]catenanes were synthesized by the cyclization of the π-acceptor 1,1 ＇-[1, 4-phenylenebis-（methylene）]bis（4,4＇-bipyridinium）bis（hexafluorophosphate）（2） and bis（bromomethyl）benzene with the templates of the π-donor phenylene-diacetylene crown ethers la and lb in the yields of 31%, 35%, respectively. The mass spectra, 1H and 13C NMR spectra confirm that the phenylene-diacetylene crown ethers, with a nonaromatic ~r-system, successfully template the cyclization of CBPQT4＋. The X-ray crystallography analysis shows that the CBPQT4＋ ring encircles around the phenylene motif of the crown ethers, leaving the 1,3-butadiyne fragment out of the cavity of CBPQT4＋ ring. The mechanically interlocked structure of [2]catenanes was stabilized by the cooperative effects of π-stacking and hydrogen bonding interactions.     

Toward Electrochemically Controllable Tristable Three‐Station [2]Catenanes

Encouraged by the prospect of producing an electrochemical, color‐switchable red–green–blue (RGB) dye compound, we have designed, synthesized, and characterized two three‐station [2]catenanes. Both are composed of macrocyclic polyethers containing three π‐electron‐rich stations, which act as recognition sites for a π‐electron‐deficient tetracationic cyclophane. The molecular structures of the two three‐station [2]catenanes were characterized fully by mass spectrometry and ¹H NMR spectroscopy. To anticipate the relative occupancies of the three stations in each [2]catenane by the cyclophane, model compounds with the same constitutions in the vicinity of the stations were synthesized. The relative ground‐state populations of the three stations occupied in both [2]catenanes were estimated from the thermodynamic parameters for 1:1 complexes between all these model compounds and the cyclophane, obtained from isothermal titration calorimetry (ITC). The electrochemical and electromechanical properties of the three‐station [2]catenanes were analyzed by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and spectroelectrochemistry (SEC). The first three‐station [2]catenane was found to behave like a bistable system, whereas the second can be described as a quasi‐tristable system.     

Switching of pseudorotaxanes and catenanes incorporating a tetrathiafulvalene unit by redox and chemical inputs

An acyclic polyether 1a, incorporating a central tetrathiafulvalene (TTF) electron donor unit and two 4-tert-butylphenoxy groups at its termini, has been synthesized. Two macrocyclic polyethers containing two different electron donors, namely a TTF unit with, in one case, a 1,4-dioxybenzene ring (2a), and, in the other case (2b), a 1,5-dioxynaphthalene ring system, have also been synthesized. These two macrocyclic polyethers have been mechanically interlocked in kinetically controlled template-directed syntheses with cyclobis(paraquat-p-phenylene) cyclophane (3(4+)) to afford the [2]catenanes 2a/3(4+) and 2b/3(4+), respectively. X-ray crystallography reveals that the [2]-catenane 2b/3(4+) has the TTF unit of 2b located inside the cavity of 3(4+). The spectroscopic (UV/vis and 1H NMR) and electrochemical properties of compounds 1a, 2a, 2b, 2a/3(4+), and 2b/3(4+) and of the [2]pseudorotaxane 1a.3(4+) were investigated. The absorption and emission properties of the mono- and dioxidized forms of the TTF unit in these various species have also been studied. The results obtained in acetonitrile solution can be summarized as follows. (a) While TTF2+ exhibits a strong fluorescence, no emission can be observed for the TTF2+ units contained in the polyethers and in their pseudorotaxanes and catenanes. (b) A donor-acceptor absorption band is observed upon two-electron oxidation of the TTF unit in the macrocyclic polyethers 2a and 2b. (c) The spontaneous self-assembly of 1a and 3(4+) to give the [2]pseudorotaxane 1a.3(4+) is strongly favored (Kass. = 5 x 10(5) L mol-1) but slow (at 296 K, k = 11.3 L mol-1 s-1 and delta G++ = 15.9 kcal mol-1) because of the steric hindrance associated with the bulky end groups of 1a. (d) In the pseudorotaxane 1a.3(4+), the reversible displacement of the cyclophane from the TTF unit in the threadlike substrate occurs on oxidation/reduction of its electroactive components. (e) Switching between the two translational isomers of the catenanes 2a/3(4+) and 2b/3(4+) occurs by cyclic oxidation and reduction of the TTF unit contained in 2a and in 2b, respectively. (f) Addition of o-chloroanil to the pseudorotaxane 1a.3(4+) and to the catenanes 2a/3(4+) and 2b/3(4+) causes the displacement of the TTF unit from the cavity of the cyclophane 3(4+) because of the formation of an adduct between the TTF unit and o-chloroanil.     

2]Catenane assembly from calix[4]arene crown ethers [In Process Citation

A variety of novel calix[4]arene-incorporating crown ethers with or without intramolecular hydrogen bonding have been prepared by two efficient methods and utilized as donor rings to assemble calix[4]arene [2]catenanes based on pi-stacking interaction between hydroquinone and bipyridinium units. Treatment of calix[4]arene crown ethers 4, 10a, or 10b, whose cone conformation was fixed by intramolecular hydrogen bonding within the calix[4]arene moiety, with dicationic salt 15 x 2PF6 and dibromide 16 afforded the corresponding [2]catenanes 17a x 4PF6, 17b x 4PF6, and 17c x 4PF6 in 20%, 53%, and 55% yields, respectively, whereas from the reactions of 15 x 2PF6 and dibromide 16 in the presence of conformationally flexible 11 or 12 with a cone conformation kept by two propyl groups, [2]catenanes 18 x 4PF6 and 19 x 4PF6 were obtained in 12% and 6% yields. [2]Catenanes 21a x 4Cl, 21b x 4Cl, and 21c x 4Cl, incorporating calix[4]arene in both the donor and acceptor rings, were also successfully assembled from 10a or 10b, 16, and dicationic salts 20a x 2PF6 or 20b x 2PF6. The dynamic 1H NMR and absorption spectra of the [2]catenanes have been investigated, which revealed a strongest donor-acceptor interaction in 17a x 4PF6 and that the cone [2]catenanes 17a-c x 4PF6 can isomerize to the partial cone isomer at high temperature. The difference of the dynamic properties of these catenanes was discussed. The results demonstrate that catenation is one new general method to change the conformational distributions of calix[4]arenes.     

Donor–Acceptor [2]- and [3]Catenanes Assembled from Versatile Pre-Organized Cp*Rh/Ir-Directed Pseudorotaxane Tectons

A stepwise self-assembly protocol has been used to synthesize [2]- and [3]catenanes. Firstly, binuclear Cp*Rh/Ir-directed (Cp*=pentamethylcyclopentadienyl) pseudorotaxanes were prepared through self-assembly, driven by donor–acceptor interactions between electron-deficient naphthalenediimide (NDI) units and an electron-rich crown ether. Subsequently, the pre-organized pseudorotaxanes were applied as tectons for self-assembly of [2]- and [3]catenanes by combination with very simple linkers. The structures of the catenanes were confirmed by NMR spectroscopy, ESI mass spectrometry, single-crystal X-ray diffraction analysis, and elemental analysis.     

Dual-mode "co-conformational" switching in catenanes incorporating bipyridinium and dialkylammonium recognition sites

Three [2]catenanes and three [3]catenanes incorporating one or two pi-electron-rich macrocyclic polyethers and one pi-electron-deficient polycationic cyclophane have been synthesized in yields ranging from 4 to 38%. The pi-electron-rich macrocyclic components possess either two 1,4-dioxybenzene or two 1.5-dioxynaphthalene recognition sites. The pi-electron-deficient cyclophane components incorporate two bipyridinium and either one or two dialkylammonium recognition sites. The template-directed syntheses of these catenanes rely on i) pi...pi stacking interactions between the dioxyarene and bipyridinium recognition sites, ii) C-H...O hydrogen bonds between some of the bipyridinium hydrogen atoms and some of the polyether oxygen atoms, and iii) C-H...pi interactions between some of the dioxyarene hydrogen atoms and the aromatic spacers separating the bipyridinium units. The six catenanes were characterized by mass spectrometry and by both 1H and 13C NMR spectroscopy. The absorption spectra and the electrochemical properties of the catenanes have been investigated and compared with those exhibited by the component macrocycles and by related known catenanes. Broad and weak absorption bands in the visible region, originating from charge-transfer (CT) interactions between electron-donor and electron-acceptor units, have been observed. Such charge-transfer interactions are responsible for the quenching of the potentially fluorescent excited states of the aromatic units of the macrocyclic polyether components. The redox behavior of these novel compounds has been investigated and correlations among the observed redox potentials are illustrated and discussed. The catenanes undergo co-conformational switching upon one-electron reduction of the two bipyridinium units. One of them--in its reduced form--can be also switched by acid/base inputs and exhibits AND logic behavior. The co-conformational rearrangements induced by the redox and acid/base stimulations lend themselves to exploitation in the development of molecular-level machines and logic gates.     

Organometallic Borromean Rings and [2]Catenanes Featuring Di-NHC Ligands

We report herein a series of organometallic Borromean rings (BRs) and [2]catenanes prepared from benzobiscarbene ligands. The reaction of dinickel complexes of the benzobiscarbenes 1 a – 1 c with a thiazolothiazole bridged bipyridyl ligand L² led by self-assembly to a series of organometallic BRs. Solvophobic effects played a crucial role in the formation and stability of the interlocked species. The stability of BRs is related to the N-alkyl substituents at the precursors 1 a – 1 c , where longer alkyl substitutes improve stability and inter-ring interactions. Solvophobic effects are also important for the stability of [2]catenanes prepared from 1 a – 1 c and a flexible bipyridyl ligand L³ . In solution, an equilibrium between the [2]catenanes and their macrocyclic building blocks was observed. High proportions of [2]catenanes were obtained in concentrated solutions or polar solvents. The proportion of [2]catenanes in solution could be further enhanced by lengthening of the N-alkyl substitutes.     

Is [N+-H...O] hydrogen bonding the most important noncovalent interaction in macrocycle-dibenzylammonium ion complexes?

We report a new host molecule in which one diethylene glycol chain (i.e., a loop possessing only three oxygen atoms) incorporated along with two phenolic aromatic rings is linked by a xylene spacer into a macroring. The design of the molecular structure of this macrocycle "amplifies" any potential [cation...pi], [N+-H...pi], and [N+C-H...pi] interactions between the dibenzylammonium (DBA+) ion and the phenolic rings of the macrocycle; as such, these species display a very strong binding affinity in CD3NO2 (Ka = 15,000 M(-1)). The macroring also coordinates to bipyridinium ions in a [2]pseudorotaxane fashion, which makes it the smallest macrocycle (i.e., a 25-membered ring) known to complex both DBA+ and bipyridinium ions in solution. To confirm unambiguously that these pseudorotaxanes exist in solution, we synthesized their corresponding interlocked molecules, namely rotaxanes and catenanes.     

Spectroscopic and Electrochemical Properties of Catenanes Containing the 2,7-Diazapyrenium Unit

Abstract

The spectroscopic and electrochemical properties of two cyclophanes containing one and, respectively, two 2,7-diazapyrenium electron-acceptor units, and of their [2]catenanes with macrocycles containing two dioxybenzene or dioxynaphthalene electrondonor units have been investigated. The absorption spectra of the catenanes show weak and broad bands in the visible region, assigned to charge-transfer (CT) interactions. The very strong and structured fluorescence (298 K) and the structured fluorescence and phosphorescence (77 K) of the diazapyrenium unit are maintained in the two cyclophanes, but they are no longer present in the [2]catenanes, presumably because of a quenching process caused by the lower energy CT excited states. Each diazapyrenium unit undergoes two distinct reduction processes - only the first one of which is fully reversible - that are hardly affected at all when the diazapyrenium units are incorporated in a cyclophane. In the [2]catenanes, the CT interaction displaces the reduction processes of the diazapyrenium units toward more negative potentials. The results obtained for the diazapyrenium and previously investigated 4,4′-bipyridinium salts, selected cyclophane derivatives, and some [2]catenanes obtained by interlocking the cyclophanes with macrocycles containing two dioxyaromatic electron-donor units are compared and discussed.     

Halogen-Bonding Heteroditopic [2]Catenanes for Recognition of Alkali Metal/Halide Ion Pairs

The first examples of halogen bonding (XB) heteroditopic homo[2]catenanes were prepared by discrete Na⁺ template-directed assembly of oligo(ethylene glycol) units derived from XB donor-containing macrocycles and acyclic bis-azide precursors, followed by a Cu^I-mediated azide-alkyne cycloaddition macrocyclisation reaction. Extensive ¹H NMR spectroscopic studies show the [2]catenane hosts exhibit positive cooperative ion-pair recognition behaviour, wherein XB-mediated halide recognition is enhanced by alkali metal cation pre-complexation. Notably, subtle changes in the catenanes’ oligo(ethylene glycol) chain length dramatically alters their ion-binding affinity, stoichiometry, complexation mode, and conformational dynamics. Solution-phase and single-crystal X-ray diffraction studies provide evidence for competing host-separated and direct-contact ion-pair binding modes. We further demonstrate the [2]catenanes are capable of extracting solid alkali-metal halide salts into organic media.     

2]Catenanes built around octahedral transition-metal complexes that contain two intertwined endocyclic but non-sterically hindering tridentate ligands

Sterically hindering bidentate chelates, such as 2,9-diphenyl-1,10-phenanthroline, form entwined complexes with copper(I) and other tetrahedrally coordinated transition-metal centres. To prepare octahedral complexes containing two entwined tridentate ligands and thus apply a strategy similar to that used for making catenanes with tetrahedral metal centres, the use of the classical terpy ligand (terpy=2,2':6',2'-terpyridine) appears to be attractive. In fact, 6,6'-diphenyl-2,2':6',2'-terpyridine (dp-terpy) is not appropriate due to strong "pinching" of the organic backbone by coordination to the metal and thus stable entwined complexes with this ligand cannot be obtained. Herein, we report the synthesis and coordination properties of a new family of tridentate ligands, the main features of which are their endocyclic nature and non-sterically hindering character. The coordinating fragment consists of two 8'-phenylisoquinolin-3'-yl groups attached at the 2 and 6 positions of a pyridine nucleus. Octahedral complexes containing two such entangled ligands around an octahedral metal centre, such as Fe(II) , Ru(II) or Co(III) , are highly stable, with no steric congestion around the metal. By using functionalised ligands bearing terminal olefins, double ring-closing metathesis leads to [2]catenanes in good yield with Fe(II) or Co(III) as the templating metal centre. The X-ray crystallography structures of the Fe(II) precursor and the Fe(II) catenane are also reported. These show that although significant pinching of the ligand is observed in both Fe(II) complexes, the system is very open and no steric constraints can be detected.     

Surface‐Bound Cucurbit[8]uril Catenanes on Magnetic Nanoparticles Exhibiting Molecular Recognition

We demonstrate the preparation of surface‐bound cucurbit[8]uril (CB[8]) catenanes on silica nanoparticles (NPs), where CB[8] was employed as a tethered supramolecular “handcuff” to selectively capture target guest molecules. In this catenane, CB[8] was threaded onto a methyl viologen (MV²⁺) axle and immobilized onto silica NPs. The formation of CB[8] catenanes on NPs were confirmed by UV/Vis titration experiments and lithographic characterization, demonstrating a high density of CB[8] on the silica NPs surface, 0.56 nm^?2. This CB[8] catenane system exhibits specific molecular recognition towards certain aromatic molecules such as perylene bis(diimide), naphthol and aromatic amino acids, and thus it can act as a nanoscale molecular receptor for target guests. Furthermore, we also demonstrate its use as an efficient and recyclable nano‐platform for peptide separation. By embedding magnetic NPs inside silica NPs, separation could be achieved by simply applying an external magnetic field. Moreover, the peptides captured by the catenanes could be released by reversible single‐electron reduction of MV²⁺. The entire process demonstrated high recoverability.     

Formation of Self‐Templated 2,6‐Bis(1,2,3‐triazol‐4‐yl)pyridine [2]Catenanes by Triazolyl Hydrogen Bonding: Selective Anion Hosts for Phosphate

We report the remarkable ability of 2,6‐bis(1,2,3‐triazol‐4‐yl)pyridine ( btp ) compounds 2 with appended olefin amide arms to self‐template the formation of interlocked [2]catenane structures 3 in up to 50 % yield when subjected to olefin ring‐closing metathesis in CH₂Cl₂. X‐ray diffraction crystallography enabled the structural characterization of both the [2]catenane 3 a and the non‐interlocked macrocycle 4 a . These [2]catenanes showed selective triazolyl hydrogen‐bonding interactions with the tetrahedral phosphate anion when screened against a range of ions; 3 a , b are the first examples of selective [2]catenane hosts for phosphate.