Sensor applications of attenuated total reflection infrared spectroscopy

Attenuated total reflection Fourier transform infrared spectroscopy is one of the most powerful methods for recording infrared spectra of biological materials in general, and of biological membranes in particular. It is fast, yields a strong signal with only a few micrograms of sample and recent ATR devices allow the recording of nanogram quantities. Importantly, it allows information about the orientation of various parts of the molecules under study to be evaluated in an oriented system. While mid-infrared radiation has been most used for fundamental research on molecular structure, it is becoming an interesting alternative for sensor research. In addition to the usual sensor response, one of its advantages is its sensitivity to molecular conformation. In turn, the binding of a drug onto a receptor may be monitored as for other detection methods but in addition the evaluation of the structural response of the receptor to this binding is likely to bring invaluable information on the mechanism of action of the drug. The present review focuses only on the ATR-mid IR spectroscopy with a special interest for proteins and biological membranes.     

Theoretical insights into bone grafting silicon-stabilized alpha-tricalcium phosphate

Silicon-stabilized tricalcium phosphate (Si-TCP) is an excellent bone graft substitute being totally resorbed by the body and replaced by natural bone. Experimental studies show that coatings and bulk ceramics based on this material have superior bioactivity not existing in traditional hydroxyapatite materials. However, the mechanisms through which Si and other dopants affect the properties are not known. We have performed ab initio density functional calculations to investigate the effect of Si dopants on these materials. The results show that Si2O7 species can be formed with weak binding in bulk alpha-TCP with an oxygen vacancy for charge compensation, and that 2SiO4 substitution for a pair of PO4 groups with an excess Ca2+ for charge compensation also leads to a stable structure. With an increase of Si concentration, the former is less bound and the latter becomes more stable, and is a good candidate for the form of Si in Si-stabilized alpha-TCP. The stability of the Si-substituted TCP seems to be determined by the P-P distance of the pair of PO4 groups to be replaced before substitution. The Si-doping leads to a pronounced change in the Ca-O bond lengths, and has little effect on the P-O bonds.     

Comparison of infrared attenuated total reflection and Raman spectroscopy in the quantitative analysis of diclofenac sodium in tablets

The quantification of diclofenac sodium (DS) in tablets was performed using partial least squares (PLS) models based on FTIR ATR (Fourier transform infrared attenuated total reflection) and FT-Raman spectra. Separate calibration models were built for two groups of tablets, standard and sustained release, containing different excipients. To compare the predictive ability of these models the relative standard errors of prediction (RSEP) were calculated. In the case of DS determination from the Raman data, RSEP error values in the range of 2.4-2.8% (2.7-2.9%) for the calibration (validation) data sets were obtained. For ATR models constructed using spectra registered three times for each sample, RSEP errors in the range of 3.6-3.7% (4.2-4.3%) were found. These errors decreased to 2.8% (3.0%) when spectra collected six times were applied. Five commercial products containing 25, 50, 75 and 100 mg of DS per tablet were quantified. Concentrations derived from the elaborated models correlated strongly with the results of reference analyses and gave recoveries of 99.1-101.3% and 99.1-101.7% for the ATR and Raman data, respectively. Although both spectroscopic techniques can be used as fast and convenient alternatives to the standard pharmacopeial methods of DS quantification in solid dosage forms, in the case of the ATR technique, it is necessary to repeat measurements at least a few times to obtain acceptable quantification errors.     

Surface-modified ZnSe waveguides for label-free infrared attenuated total reflection detection of DNA hybridization

This communication presents a novel label-free biosensing method to monitor DNA hybridization via infrared attenuated total reflection (IR-ATR) spectroscopy using surface-modified ZnSe waveguides. Well-defined carboxyl-terminated monolayers were formed at H-terminated ZnSe by direct photochemical activation. Chemical activation of the acidic function was obtained by using succinimide/carbodiimide linkers. The sequential surface modification reactions were characterized by XPS and IR-ATR spectroscopy. Finally, a single stranded DNA probe with a C6-NH(2) 5' modifier was coupled to the ester-terminated surface via peptide bonding, and the hybridization of the immobilized DNA sequence with its complementary strand was directly evaluated by IR-ATR spectroscopy in the mid-infrared (MIR) spectral regime (3-20 μm) without requiring an additional label. A shift of the vibrational modes corresponding to the phosphodiester and deoxyribose structures of the DNA backbone was observed. Hence, this approach substantiates a novel strategy for label-free DNA detection utilizing mid-infrared spectroscopy as the optical sensing platform.     

Nitrogen-doped diamond-like carbon as optically transparent electrode for infrared attenuated total reflection spectroelectrochemistry

This contribution describes the development of nitrogen-doped diamond-like carbon (N-DLC) thin films for multi-reflection mid-infrared (MIR) attenuated total reflectance (IR-ATR) spectroelectrochemistry. N-DLC coatings were deposited using pulsed laser deposition (PLD) involving the ablation of a high purity graphite target. The DLC matrix was further modified by ablating the target in the presence of nitrogen gas. This technique offers the advantage of depositing thin films at room temperature, thereby enabling coating of temperature-sensitive substrates including e.g., MIR waveguides. The resulting films were analyzed with X-ray photoelectron spectroscopy (XPS), and determined to be composed of carbon, nitrogen, and adventitious oxygen. Raman spectroscopic studies indicate that the addition of nitrogen induces further clustering and ordering of the sp(2)-hybridized carbon phase. The electrochemical activity of PLD fabricated N-DLC films was verified using the Ru(NH(3))(3+/2+) redox couple, and was determined to be comparable with that of other carbon-based electrodes. In situ spectroelectrochemical studies involving N-DLC coated zinc selenide (ZnSe) MIR waveguides provided evidence concerning the oxidation of N-DLC at anodic potentials in 1 M HClO(4) solutions. Finally, the electropolymerization of polyaniline (PAni) was performed at N-DLC-modified waveguide surfaces, which enabled spectroscopic monitoring of the electropolymerization, as well as in situ studying the structural conversion of PAni at different potentials.     

Quantitative determination of prednisone in tablets by infrared attenuated total reflection and Raman spectroscopy

The quantification of prednisone in tablets was performed using partial least squares (PLS) models based on FTIR-attenuated total reflection (ATR) and FT-Raman spectra. To compare the predictive ability of these models, the relative standard error of prediction (RSEP) values were calculated. In the case of prednisone determination from the FT-Raman data, RSEP values of 3.1 and 3.2% for the calibration and validation data sets were obtained. For FTIR-ATR models, which were constructed using five spectra for each sample, these errors amounted to 2.6 and 2.9%, respectively. Four commercial products containing 1, 5, 10, and 20 mg prednisone/tablet were quantified. Concentrations derived from the elaborated models correlated strongly with the results of reference analyses and with the declared values (in parentheses). The analyses gave recoveries of 100.0-101.6% (100.1-103.0%) and 98.1-103.2% (100.4-102.9%) for FTIR-ATR and FT-Raman data, respectively. A successful quantification of prednisolone in tablets containing 5 mg active ingredient/tablet was also performed using the PLS model, which was based on FTIR-ATR spectra, with a recovery of 99.8 (98.8%). Both reported spectroscopic techniques can be used as fast and convenient alternatives to the standard pharmacopeial methods of prednisone and prednisolone quantification in solid dosage forms. However, in the case of FTIR-ATR spectroscopy, it is necessary to repeat measurements several times to obtain sufficiently low quantification errors.     

用衰减全反射红外二向色性表征聚环氧乙烷薄膜的表面取向

应用衰减全反射二向色性表征聚合物的表面取向,可不必测定样品的折光率使大多数实验简化.以聚环氧乙烷为例.用衰减全反射偏振红外光谱测定了它的表面二向色性比和计算了相应的取向函数.     

Exploring catalytic solid/liquid interfaces by in situ attenuated total reflection infrared spectroscopy

In situ attenuated total reflection Fourier transform infrared (ATR-FT-IR) spectroscopy has gained considerable attention as a powerful tool for exploring processes occurring at solid/liquid and solid/liquid/gas interfaces as encountered in heterogeneous catalysis and electrochemistry. Understanding of the molecular interactions occurring at the surface of a catalyst is not only of fundamental interest but constitutes the basis for a rational design of heterogeneous catalytic systems. Infrared spectroscopy has the exceptional advantage to provide information about structure and environment of molecules. In the last decade, in situ ATR-FT-IR has been developed rapidly and successfully applied for unraveling processes occurring at solid/liquid interfaces. Additionally, the kinetics of complex reactions can be followed by quantifying the concentration of products and reactants simultaneously in a non-destructive way. In this tutorial review we discuss some key aspects which have to be taken into account for successful application of in situ ATR-FT-IR to examine solid/liquid catalytic interfaces, including different experimental aspects concerned with the internal reflection element, catalyst deposition, cell design, and advanced experimental methods and spectrum analysis. Some of these aspects are illustrated using recent examples from our research. Finally, the potential and some limitations of ATR will be elucidated.     

Ex-vivo determination of blood glucose by microdialysis in combination with infrared attenuated total reflection spectroscopy

Several biosensors have been developed for continuous monitoring of human blood glucose, which is desirable for insulin-dependent diabetic patients. Developments in the field of quantitative assays using infrared attenuated total reflection spectroscopy allow the determination of metabolites at low concentrations. The microdialysis technique can provide a continuous sampling of extracellular body fluids. As only compounds of low molecular weight are passed on, infrared spectrometric quantitation is eased considerably. Samples were obtained by microdialysis of human blood plasma and aqueous glucose solutions. Multivariate calibration by partial least-squares was evaluated for its analytical performance in ex-vivo blood glucose monitoring. Mean squared prediction errors obtained by cross validation were 5.4 mg/dL for dialysate samples from different patients and 1.3 mg/ dL for dialysates from glucose solutions. Further investigations were carried out to achieve miniaturization of the measuring and detection device. Received: 5 December 1996 / Revised: 20 March 1997 / Accepted: 29 March 1997     

Rapid determination of total trans fat content--an attenuated total reflection infrared spectroscopy international collaborative study

Interest in trans fat labeling has prompted efforts to develop new, more efficient methods for rapidly and accurately determining trans fat content of foods. A novel and rapid (5 min) attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopic procedure was recently developed and applied to food products. This procedure was voted official method AOCS Cd 14d-99 by the American Oil Chemists' Society in 1999 after testing in a 12 laboratory international collaborative study. The results of the study are described in this paper. Analytical ATR-FTIR results exhibited high accuracy in the range 5-40% trans; results tended to have <2% high bias relative to the gravimetrically determined values. The precision of this internal reflection method was found to be superior to the precision of transmission infrared official methods. It is recommended that the applicability of the ATR-FTIR method be limited to trans levels of >5% (as percent of total fat).     

Ex-vivo determination of blood glucose by microdialysis in combination with infrared attenuated total reflection spectroscopy

Several biosensors have been developed for continuous monitoring of human blood glucose, which is desirable for insulin-dependent diabetic patients. Developments in the field of quantitative assays using infrared attenuated total reflection spectroscopy allow the determination of metabolites at low concentrations. The microdialysis technique can provide a continuous sampling of extracellular body fluids. As only compounds of low molecular weight are passed on, infrared spectrometric quantitation is eased considerably. Samples were obtained by microdialysis of human blood plasma and aqueous glucose solutions. Multivariate calibration by partial least-squares was evaluated for its analytical performance in ex-vivo blood glucose monitoring. Mean squared prediction errors obtained by cross validation were 5.4 mg/dL for dialysate samples from different patients and 1.3 mg/ dL for dialysates from glucose solutions. Further investigations were carried out to achieve miniaturization of the measuring and detection device.     

PH-dependent coordination of metal-lisinopril complex investigated by attenuated total reflection/Fourier transform infrared spectroscopy

In order to simulate the in vivo binding behavior of angiotensin-converting enzyme (ACE) inhibitors to the zinc-containing active center of ACE, the in vitro interaction between lisinopril and zinc or nickel ions was investigated in aqueous solutions of different pH by using attenuated total reflection (ATR)/Fourier transform infrared (FT-IR) spectroscopy with second-derivative IR spectral analysis. The results indicated that the lisinopril dissociation process occurred in a stepwise fashion during increase in pH. The IR peaks at 1642 cm(-1) (carbonyl stretching of tertiary amide) and at 1582 cm(-1) (asymmetric COO- stretching) for lisinopril in solution at pH 3.5 shifted to 1606 and 1586 cm(-1) after addition of Ni2+ ions, respectively, but there was no marked changes in IR spectra of lisinopril after addition of Zn2+ ions. When the Zn2+ ions were added to lisinopril solution at pH 5.0, the peak at 1642 cm(-1) also shifted to 1604 cm(-1) and the peak at 1582 cm(-1) shifted to 1586 cm(-1), similar to the changes at pH 3.5 after adding Ni2+ ions. However, the peaks at 1582 and 1642 cm(-1) both shifted to 1599 cm(-1) after addition of Ni2+ ions at pH 5.0 or at pH 7.3. The peak at 1576 cm(-1) also shifted to 1599 cm(-1) after addition of Zn2+ ions to lisinopril solution at pH 7.3. Different coordination sites or types (chelating, bridging or pseudounidentate complex) between lisinopril and Zn2+ or Ni2+ ions were proposed, based on the separation value between v(as) (COO-) and v(s) (COO-), and the shifting of carbonyl groups. Coordination of the secondary amine in lisinopril to metal ions was also evidenced.     

In situ monitoring of the DNA hybridization by attenuated total reflection surface-enhanced infrared absorption spectroscopy

In situ monitoring of DNA hybridization kinetics is achieved via an attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) technique using a sandwich assay structure. The synergistic enhancement effect gives this ATR-SEIRAS-based detection strategy promise to be a convenient and unique platform for bioanalysis.     

Aqueous uranium(VI) hydrolysis species characterized by attenuated total reflection Fourier-transform infrared spectroscopy

The speciation of uranium(VI) in micromolar aqueous solutions at ambient atmosphere was studied by attenuated total reflection Fourier-transform infrared (ATR FT-IR) spectroscopy and by speciation modeling applying the updated NEA thermodynamic database. It can be shown that reliable infrared spectra of micromolar U(VI) solutions are obtained abolishing the restrictions of previous spectroscopic investigations to millimolar concentrations and, consequently, to the acidic pH range. A significant change of the U(VI) speciation can be derived from the spectral alterations of the absorption band representing the antisymmetric stretching mode (nu3) of the UO2(2+) ion observed upon lowering the U(VI) concentration from the milli- to the micromolar range at a constant pH 4 value. The acquisition of spectra of diluted U(VI) solutions allows the increase of the pH up to 8.5 without the risk of formation of colloidal or solid phases. The infrared spectra are compared to the results of the computed speciation patterns. Although a complete interpretation of the spectra can not be given at this state of knowledge, the spectral data strongly suggest the presence of monomeric U(VI) hydroxo species already showing up at a pH value > or = 2.5 and dominating the speciation at pH 3. This is in contradiction to the predicted speciation where the fully hydrated UO2(2+) is expected to represent the main species at pH values below 4. At ambient pH, a more complex speciation is suggested compared to the results of the computational modeling technique. The predicted dominance of the UO2(CO3)3(4-) complex at pH > or = 8 was not confirmed by the infrared data. However, the infrared spectra indicate the formation of hydroxo complexes obviously containing carbonate ligands.     

Total reflection X-ray fluorescence analysis of Mongolian coals

Coal samples were analysed for trace elements using total reflection X-ray fluorescence with monochromatic excitation. The procedure involved direct irradiation of the sample with the incoherent peak as internal standard. A new method for spectrometer sensitivity determination and sample quantification, was evaluated. Variable amounts of several trace elements were obtained in the analysis of coal from eight different deposits of Mongolia. The accuracy of the procedure was verified with the analysis of a coal standard.     

Surface complexation of mellitic acid to goethite: an attenuated total reflection Fourier transform infrared study

The nature of the interaction between mellitic acid (benzene hexacarboxylic acid) and the common soil mineral goethite (alpha-FeOOH) has been investigated as a function of pH and ionic strength by use of attenuated total reflection Fourier transform infrared spectroscopy. Molecular orbital calculations of the theoretical vibrational frequencies of the mellitate ion (L6-) and dihydrogen mellitate (H2L4-) have allowed the measured absorption frequencies to be accurately assigned. At pH values above 6, adsorption involves outer-sphere complexation of the deprotonated L6- ion. At lower pH values, there is evidence of a second outer-sphere surface complex involving a partially protonated species, although the extent of protonation of the surface species is significantly less than that found for the solution species at the same pH. While there is no evidence of inner-sphere complexation, increasing the ionic strength to 2.0 M does not displace the adsorbed species but does increase the fraction present on the surface as the fully deprotonated L6-. The small effect of ionic strength suggests that the adsorptive interaction, although outer-sphere in character, is still relatively strong, which indicates that hydrogen bonds may play a significant role. Hydrogen bonding may also help to account for the observed outer-sphere complexation at pH values above the pHiep of goethite.     

Total reflection X-ray fluorescence analysis with chemical microchip

A chemical microchip, which has a flat region on the surface, was recently designed for total reflection X-ray fluorescence (TXRF) analysis. A sample solution was introduced from an inlet by a microsyringe and flowed into a microchannel. Finally it overflowed from the well-type microchannel on the flat region. The sample solution on this region was dried, and then measured by TXRF. The TXRF spectra could be measured with a low background level. This preliminary result indicated that the edge of the well-type channel would not cause a serious problem for TXRF analysis. In addition, a good linear relationship was obtained for Zn Kα in Zn standard solution. This suggests that quantitative analysis by TXRF is feasible in combination with a chemical microchip.     

Photoassisted decomposition of malonic acid on TiO2 studied by in situ attenuated total reflection infrared spectroscopy

The photoassisted mineralization, i.e., conversion to CO2 and water, of malonic acid over P25 TiO2 was investigated by in situ attenuated total reflection infrared (ATR-IR) spectroscopy in a small volume flow-through cell. Reassignment of the vibrational bands of adsorbed malonic acid, assisted by deuterium labeling, reveals two dissimilar carboxylate groups within the molecule. This indicates adsorption via both carboxylate groups, one in a bridging or bidentate and the other in monodentate coordination. During irradiation the coverage of malonic acid strongly decreases, and oxalate is observed on the surface in at least two different adsorption modes. The major oxalate species observed during irradiation is characterized by monodentate coordination of both carboxylate groups. In the dark, however, part of these species adopts another adsorption mode, possibly interacting only with one carboxylate group. During band gap illumination a large fraction of the surface is not covered by acid. Oxalate is a major intermediate in the mineralization of malonic acid. However, the observed transient kinetics of adsorbed malonic and oxalic acid indicates additional pathways not involving oxalate. The rate constant for oxalate decomposition is slightly larger than the one for oxalate formation from malonic acid. As the oxalate is desorbing slowly from the surface its concentration in the liquid phase is small, despite the fact that it is a major intermediate in the mineralization of malonic acid.