基于J-TEXT 装置的光耦合隔离放大器设计与分析

基于反馈技术设计了一款带宽2.7MHz、高线性度、低传输延时的光耦合隔离放大器,仿真分析了 I-V 转换电路补偿电容对电路频率特性的影响,并选择了合适的电路参数。将部分寄生参数考虑在内,建立了电路数学模型,仿真、测试与理论分析相结合研究了电路的线性度与频率特性。基于J-TEXT 装置静电探针悬浮电位测量系统验证了电路在系统中的可用性。     

半导体激光放大器的电路模型及噪声特性分析

给出了半导体激光（ＬＤ）放大器的电路模型，使得对半导体激光放大器的特性可以用通用电路分析软件进行分析。用该模型对谐振型光放大器光功率输出特性与失谐关系进行了模拟分析，模型的分析结果与已报道的理论和实验基本一致；用该模型还对谐振光放大器的噪声进行了分析。     

基于CMOS工艺的自动增益控制电路研究

在无线接收机中,天线接收的信号强度往往变化很大,自动增益控制环路(Automatic Gain Control,AGC)根据这个信号强度来动态调节控制放大器的增益,向后级基带电路(如ADC)提供幅度恒定的信号,使得接受到的不同强度信号均能被正确接收和解调。鉴于此,本文基于TSMC90nm CMOS工艺着重论述了针对70MHz中频信号的AGC电路设计过程。包括系统指标设定、系统模型建立、具体电路设计及仿真结果分析等,并对版图布局进行了探讨。     

A KIND OF NEW AMPLIFIER

Chaotic characteristics in the iteration of logistic map(one-dimensional discrete dynamic system) are simulated and analyzed. The circuit implementation of a kind of chaotic amplifier model is based on the chaotic characteristics that chaos is sensitively dependent on its initial conditions, and the circuit simulation result is given using simulation program with integrated circuit emphasis for personal computer (PSPICE), and is compared with linear amplifier. Advantages and disadvantages of such a model are indicated.     

Analysis of chirp characteristics of DFB lasers and integrated laser-modulators

A new method of analyzing the chirp characteristics of directly modulated lasers and integrated laser-modulators is presented in this paper. Phase-circuit has been introduced into the circuit model of distributed feedback (DFB) lasers in the analysis. Therefore, the chirp characteristics of the device can be obtained by simulating the modified circuit model. The simulation results agree well with the published data. Furthermore, this modified model is combined with the circuit model of electroabsorption (EA) modulators to simulate the chirp characteristics of the monolithic integration of a DFB laser and an EA modulator. The simulation is focused on the dependence of the frequency chirp of the integrated device on the isolation resistance between laser and modulator. Much lower chirp can be seen in the integrated lightwave source compared to the directly modulated laser.     

长周期扫描电路的设计与应用

本文鉴于常用的基于电容充放电的运算放大器积分式长周期扫描电路输出电压线性差,设计了基于计数器和D／A转换的数字式线性功率扫描电路。     

Broadband Amplifier Module Used in 3MM IF-Switch Radiometer

This paper introduced the design procedure of a low-noise broadband amplifier module used in 3mm IF-Switch radiometer. We first analyzed the impact of IF amplifier on the overall performance of the radiometer and then illustrated the techniques used in broadband amplifier design. CAD software was used in the procedure of simulation and the circuit was implemented in hybrid microstrip format. The final amplifier module matched well with the simulation result.     

光学特征点亮度控制方法研究

针对用于空间大尺寸测量的单机视觉三维坐标测量系统的光学测棒的特征点亮度远程控制问题,提出了一种通过PC机的RS485串行接口控制的具有良好线性的光学测棒特征点亮度控制方案。介绍了方案的工作原理,根据光学特征点———红外发光二极管的光学特性,运用新型D/A转换器、运算放大器及三极管等构成可程序控制的恒流源电路,解决了发光二极管控制过程中的电流调整困难、工作过程中发热、管耗高等问题。实验证明该方法具有线性好,灵敏度高,反映速度快等优点,完全可以满足实际应用的要求。     

Design of broadband hybrid fiber amplifier based on particle swarm optimization algorithm北大核心CSCD

基于铒/镱共掺光纤放大器（erbium-ytterbium doped fiber amplifier, EYDFA）的理论模型和受激拉曼散射效应的分析理论,利用EYDFA和拉曼光纤放大器（Raman fiber amplifier, RFA）的增益谱互补特性,研究并设计了EYDFA与二阶多泵浦RFA相结合的混合放大器结构。为了得到高增益和低平坦度的混合放大器,引入了粒子群算法优化泵浦光波长和功率。仿真结果表明:在不使用增益均衡器的条件下,所设计的混合光纤放大器在输出端得到了近似相等的输出光功率,在90 nm的带宽范围内平均增益为38.78 dB,增益平坦度为1.1 dB,为混合放大器的设计和优化提供了参考。     

Optimization of the two-stage common-emitter transistor amplifier for equalization circuit in visible light communication system

The equalization circuit in the visible light communication (VLC) system has large impacts on the frequency response and can greatly improve the 3-dB modulation bandwidth. The optimization of the two-stage common-emitter transistor amplifier for equalization circuit is presented in detail and the design rules are disclosed. At first, the frequency response of the single-stage amplifier is derived and the simulated characteristic curves illustrated the changing regularity of four main factors are given. Subsequently, the frequency response of the two-stage amplifier is investigated by simulation. It is shown that the capacitors in the resistance–capacitance (RC) network has large impacts on the low-frequency range, while the resistors in the RC network can adjust the high-frequency, and the resistors in the emitter can adjust the low-frequency. Experimental measurements of the fabricated equalization circuit demonstrated the simulation results. Then, the two-stage amplifier is induced as post-equalization circuit (post-EQC) or pre-equalization circuit (pre-EQC) and the measured frequency response curves are given. The equalization circuit with proper sets of capacitors and resistors would flatten the frequency response curve of the VLC system. It is shown that the 3-dB modulation bandwidth of the VLC system equipped with post-EQC or pre-EQC can be expanded to 292 MHz or 304 MHz, respectively. Moreover, if the photoelectric receiver and the post-EQC are combined in the optimization, the 3-dB modulation bandwidth can be expanded to 375 MHz.