Field-amplified on-line sample stacking for determination of carnosine-related peptides by capillary electrophoresis

An on-line sample stacking method, namely field-amplified sample injection, has been developed for the separation and determination of carnosine, anserine, and homocarnosine by capillary electrophoresis. Using electrokinetic injection, about 130- to 160-fold improvement of sensitivity was achieved without loss of separation efficiency when compared to conventional sample injection. For conventional injection, the samples were dissolved in running buffer and then hydrodynamically injected for 10 s (3.45 kPa). Various parameters affecting separation and sample stacking were optimized. Under optimum conditions, linear responses were obtained over two orders of magnitude and the detection limits (defined as S/N = 3) of carnosine, anserine, and homocarnosine were 1.5 x 10(-8) to 1.6 x 10(-8) mol/L.     

Field-amplified on-line sample stacking for simultaneous enantioseparation and determination of some beta-blockers using capillary electrophoresis

A capillary electrophoresis method using carboxymethyl-beta-cyclodextrin as the chiral selector and mixture of methanol and ethanol as the organic additive was successfully developed for the simultaneous enantioseparation and determination of six beta-blockers, namely, carteolol, atenolol, sotalol, metoprolol, esmolol and propranolol in this paper. The most suitable running buffer for enantioseparation was found to be the solution of 20 mmol/L NaH(2)PO(4)-Na(2)HOP(4) (pH 5.5) containing 1.5% w/v carboxymethyl-beta-cyclodextrin, 5% v/v methanol and 5% v/v ethanol. Furthermore, field-amplified sample injection as an on-line sample stacking method was developed in order to increase the detection sensitivity. The experimental conditions for both simultaneous enantioseparation and the field-amplified sample injection method had been investigated in detail. Under the optimum conditions, the detection limits (defined as S/N=3) of this method were 0.01, 0.05, 0.05, 0.05, 0.05 and 0.5 microg /mL for (+/-) carteolol, (+/-) atenolol, (+/-) sotalol, (+/-) metoprolol, (+/-) esmolol and (+/-) propranolol, respectively, which were much lower than those of the conventional methods. The enhancement factors were greatly improved by 25-fold for the enantiomers of the beta-blockers except five-fold for (+/-) propranolol. Eventually, the proposed method has been applied for the analysis of human serum sample.     

Field-amplified sample stacking and nonaqueous capillary electrophoresis determination of complex mixtures of polar aromatic sulfonates

Nonaqueous CE and field-amplified sample stacking have been used in the determination of complex mixtures of polar aromatic sulfonates (AS; mainly benzene- and naphthalenesulfonates) of environmental concern. The analytical procedure consists of an on-column aqueous sample enrichment, followed by the nonaqueous electrophoretic determination of stacked aromatic sulfonates. Various organic solvents were used as separation medium, acetonitrile and N-methylformamide gave the best results. Optimum capillary electrophoresis separation is obtained with ammonium acetate (25 mM) dissolved in N-methylformamide-methanol (90:10) as background electrolyte. This combined method was applied to the analysis of surface water samples spiked with selected aromatic sulfonates derivatives.     

Field-amplified online sample stacking capillary electrophoresis UV detection for plasma malondialdehyde measurement

Malondialdehyde (MDA) determination is the most widely used method for monitoring lipid peroxidation. Here, we describe an easy field-amplified sample injection (FASI) CE method with UV detection for the detection of free plasma MDA. MDA was detected within 8 min by using 200 mmol/L Tris phosphate pH 5.0 as running buffer. Plasma samples treated with ACN for protein elimination were directly injected on capillary without complex cleanup and/or sample derivatization procedures. Using electrokinetic injection, the detection limit in real sample was 3 nmol/L, thus improving of about 100-fold the LOD of the previous described methods based on CE. Precision tests indicate a good repeatability of our method both for migration times (CV = 1.11%) and for areas (CV = 2.05%). Moreover, a good reproducibility of intra- and inter-assay tests was obtained (CV = 2.55% and CV = 5.14%, respectively). Suitability of the method was tested by measuring MDA levels in 44 healthy volunteers.     

Field-amplified sample stacking capillary electrophoresis with electrochemiluminescence applied to the determination of illicit drugs on banknotes

Capillary electrophoresis (CE) with Ru(bpy)3(2+) electrochemiluminescence (ECL) detection system was established to the determination of contamination of banknotes with controlled drugs and a high efficiency on-column field-amplified sample stacking (FASS) technique was also optimized to increase the ECL intensity. The method was illustrated using heroin and cocaine, which are two typical and popular illicit drugs. Highest sample stacking was obtained when 0.01 mM acetic acid was chosen for sample dissolution with electrokinetical injection for 6 s at 17 kV. Under the optimized conditions: ECL detection at 1.2 V, separation voltage 10.0 kV, 20 mM phosphate-acetate (pH 7.2) as running buffer, 5 mM Ru(bpy)3(2+) with 50 mM phosphate-acetate (pH 7.2) in the detection cell, the standard curves were linear in the range of 7.50x10(-8) to 1.00x10(-5) M for heroin and 2.50x10(-7) to 1.00x10(-4) M for cocaine and detection limits of 50 nM for heroin and 60 nM for cocaine were achieved (S/N = 3), respectively. Relative standard derivations of the ECL intensity and the migration time were 3.50 and 0.51% for heroin and 4.44 and 0.12% for cocaine, respectively. The developed method was successfully applied to the determination of heroin and cocaine on illicit drug contaminated banknotes without any damage of the paper currency. A baseline resolution for heroin and cocaine was achieved within 6 min.     

Quantitative determination of clenbuterol, salbutamol and tulobuterol enantiomers by capillary electrophoresis

Enantiomers of clenbuterol, salbutamol and tulobuterol were directly separated and quantitated from a spiked sample by capillary electrophoresis (CE) using sulfaited beta-cyclodextrin (SCD) as chiral selector and phosphate as running buffer. The SCD and buffer concentration, pH and field strength were the parameters studied to optimize the separation. Optimal separation was obtained using 50 mM of phosphate monobasic at pH = 2.24, 0.25% (w/w) of sulfated cyclodextrin and a field strength of 10 kV, with 20 min total time analysis. Comparison between two different injection modes (hydrodynamic and electrokinetic) was made. In the hydrodynamic mode, repeatability (expressed as relative standard deviation, RSD) was less than 1.2% for migration times for all the analyte peaks and less than 2% for peak area percentages. With respect to reproducibility, RSD was less than 3.8% for migration time and less than 3% for peak area percentages. Calibration curves were set up for two different sample concentration ranges (1 to 10 microg mL(-1) and 160-800 ng mL(-1), of each of the racemates studied). Although the electrokinetic injection mode for an aqueous sample appeared to suffer from some enantiodiscrimination, calibration curves were linear in the range between 1 and 10 ng mL(-1) with regression coefficients ranging from 0.9996 to 0.9952. As in the case of hydrodynamic injection, the method was tested with a spiked sample.     

Quantitative determination of clenbuterol, salbutamol and tulobuterol enantiomers by capillary electrophoresis

Enantiomers of clenbuterol, salbutamol and tulobuterol were directly separated and quantitated from a spiked sample by capillary electrophoresis (CE) using sulfated β-cyclodextrin (SCD) as chiral selector and phosphate as running buffer. The SCD and buffer concentration, pH and field strength were the parameters studied to optimize the separation. Optimal separation was obtained using 50 mM of phosphate monobasic at pH = 2.24, 0.25% (w/w) of sulfated cyclodextrin and a field strength of 10 kV, with 20 min total time analysis. Comparison between two different injection modes (hydrodynamic and electrokinetic) was made. In the hydrodynamic mode, repeatability (expressed as relative standard deviation, RSD) was less than 1.2% for migration times for all the analyte peaks and less than 2% for peak area percentages. With respect to reproducibility, RSD was less than 3.8% for migration time and less than 3% for peak area percentages. Calibration curves were set up for two different sample concentration ranges (1 to 10 μg mL^–1 and 160– 800 ng mL^–1, of each of the racemates studied). Although the electrokinetic injection mode for an aqueous sample appeared to suffer from some enantiodiscrimination, calibration curves were linear in the range between 1 and 10 ng mL^–1 with regression coefficients ranging from 0.9996 to 0.9952. As in the case of hydrodynamic injection, the method was tested with a spiked sample.     

Field-amplified sample stacking in capillary electrophoresis for on-column concentration of alkaloids in Sophora flavescens Ait

A simple and rapid capillary zone electrophoresis method was developed for the separation of the main alkaloids from Sophora flavescens Ait. with the optimum buffer solution containing 110 mM NaH(2)PO(4) and 15% 2-propanol (pH 3.0). The field-amplified sample stacking (FASS) technique was applied to the on-line concentration of the alkaloids. The data presented in this work demonstrate that the use of a short water plug at the column inlet is essential for improving the reproducibility of FASS with electro-injection, and that the water plug injection time affected the sensitivity significantly. The sample concentration was further increased by about 2-3-fold by the introduction of a relatively longer water plug. With this stacking measure, the concentration sensitivity was about 3-4 orders of magnitude higher than in hydrodynamic injection.     

Field-amplified sample stacking capillary zone electrophoresis applied to the analysis of opiate drugs in hair

The present paper describes the methodological optimization and validation of capillary zone electrophoresis (CZE) for the determination of major opiates (morphine, codeine, 6-monoacetylmorphine, acetylcodeine, heroin) in hair samples by using a field-amplified sample stacking injection before the separation in a binary running buffer (0.1 M sodium phosphate, pH 2.5, with 40% ethylene glycol). The applied potential was 20 kV, at 25 degrees C. Detection was by UV absorption at the fixed wavelength of 214 nm or by recording the full spectrum between 190-400 nm, thus improving the analytical selectivity and identification power of CZE. Hair samples were liquid/liquid extracted; dried extracts, reconstituted with a low-conductivity solvent (0.1 mM phosphoric acid, with 80% 1-propanol), were injected by electromigration at 10 kV for 99 s, after a 0.5 mm plug of water. Under the described conditions, the limit of detection (with a signal-to-noise ratio of 3) in hair extracts was 100 pg/mL for codeine, 75 pg/mL for morphine and 6-monoacetylmorphine (6-MAM), 150 pg/mL for ethylmorphine, and 0.75 ng/mL for acetylcodeine and heroin. The precision of the method was validated for standards in pure solution by using internal standardization, providing for intraday and day-to-day assays, in terms of migration times, relative standard deviation (RSD) values < or = 0.2%, and in terms of peak areas, RSD values <5.71%.     

毛细管电泳电化学法分离检测盐酸克伦特罗、特布他林和沙丁胺醇

建立了毛细管电泳电化学法对盐酸克伦特罗、特布他林和沙丁胺醇进行分离检测。方法采用胶束电泳体系,以铂圆盘为工作电极,考察了检测电位、缓冲液浓度和pH、十二烷基硫酸钠(SDS)浓度、分离电压等因素的影响。3个分离物在10 kV的分离电压、缓冲体系为15 mmol/L(pH 9.0)硼砂+20 mmol/L SDS条件下得到分离。盐酸克伦特罗、特布他林和沙丁胺醇的线性范围分别为2.0～400,3.5～700,5.0～1000μg/L。方法已用于猪肉样品的检测。     

柱头场放大样品富集技术测定镍

利用毛细管电泳在线化学发光检测技术,研究了镍离子场放大样品富集过程。结果表明,利用该技术可使灵敏度显著改善,浓缩因子达5 8×104,镍离子检出限为1 2×10-10mol/L。预进一段水柱可使检出限达到7 0×10-11mol L。还考察了进样方式、样品基体浓度、进样时间、进样电压对检测灵敏度的影响。     

Review of recent developments of on-line sample stacking techniques and their application in capillary electrophoresis

Capillary electrophoresis (CE) has become one of the most useful tools in separation science because of its high separation efficiency, low cost, versatility, ease of sample preparation and automation. However, some limitations of CE, such as poor concentration sensitivity due to its lower sample loading and shorter optical path length, limits its further applications in separation science. In order to solve this problem, various on-line sample preconcentration techniques such as transient isotachophoresis preconcentration, field-enhanced sample stacking, micelle to solvent stacking, micelle collapse, dynamic pH junction, sweeping, solid phase extraction, single drop microextraction and liquid phase microextraction have been combined with CE. Recent developments, applications and some variants together with different combinations of these techniques integrating in CE are reviewed here and our discussions will be confined to the past three years (2008–2011).      

Enantiomeric separation of racemic clenbuterol by capillary zone electrophoresis

A method for capillary electrophoretic enantiomeric separation of a racemic clenbuterol has been established with hydroxypropyl-β-cyclodextrin as the chiral selector. General equations and data analysis are presented to relate mobility to the equilibrium constants in simple binding equilibria and used to determine binding constants and thermodynamic parameters for host-guest complexation of clenbuterol enantiomers with hydroxypropyl-β-cyclodextrin as a selector. The effects of β-cyclodextrin type and concentration, buffer type, concentration and pH, as well as separation voltage and capillary temperature were investigated in detail. A maximal resolution of 6.78 was obtained. The binding constants of the host-guest complex of clenbuterol enantiomers with hydroxypropyl-β-cyclodextrin, K _R-CD and K _S-CD are 22.50 and 43.09 l mol^-1, respectively.     

Large-volume sample stacking combined with separation by 2-hydroxypropyl-beta-cyclodextrin for analysis of isoxyzolylpenicillins by capillary electrophoresis

A simple, quick and sensitive capillary electrophoretic technique has been developed for the pharmaceutical analysis of isoxazolylpenicillins (oxacillin, cloxacillin and dicloxacillin) at trace levels for the first time. This method comprises large-volume sample stacking using the electroosmotic flow (EOF) pump (LVSEP), separation using 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CD) as selective complex-forming background electrolyte additive, and direct UV detection. A complete resolution was achieved in the optimal background electrolyte containing 5.2 mM HP-beta-CD. LVSEP was successfully applied in their determinations to improve the sensitivity, where the EOF in the buffer zone was suppressed by using an acidic buffer with pH 3.6. The detection limits of the current technique were found to be 2.0 microg/L for each of the isoxazolylpenicillins based on the signal-to-noise ratio of 3. The curves of peak response versus concentration were linear from 5.0 to 400.0 microg/L with regression coefficients of 0.9982, 0.9986 and 0.9976, respectively. The interaction of isoxazolylpenicillins with HP-beta-CD was discussed. The association constants for complexes of HP-beta-CD with isoxazolylpenicillins were determined by electrophoretic method. The obtained association constants were 27.3, 34.9, and 48.5 M(-1), respectively, being proportional to their hydrophobic properties and steric hindrances. A simple and easy-manipulative sample preparation method was developed and validated by analyzing commercially available milk samples. It was found that with current sample preparation process and instrumentation system, 0.1 mL of milk sample is enough for the analysis of isoxazolylpenicillins to meet European Union (EU) guideline of 30 microg/kg.     

High-performance liquid chromatographic determination of clenbuterol and cimaterol using post-column derivatization.

A general high-performance liquid chromatographic method for the simultaneous and rapid determination of cimaterol and clenbuterol is described. Solid samples, such as animal tissues, faeces and feeding-stuffs, are extracted with dilute acid saturated with ethyl acetate. The resulting extracts or liquid samples, such as urine, plasma, blood and bile, are purified via Chem Elut columns. Separation is achieved by ion-pair chromatography on a Nova-Pak C18 column, and highly specific detection is obtained with an adapted version of the post-column derivatization described previously for the determination of clenbuterol in urine and animal tissues. Detection limits for liquids and solids are 0.1 ng/ml and 0.2 ng/g, respectively. The results are in complete agreement with analysis by high-performance thin-layer chromatography and gas chromatography-mass spectrometry, applied for confirmation after the same sample pretreatment. With this simple method, complete analysis of a liquid sample needs about 30 min and, even without an automatic sampler, 40 samples can be completely analysed in one day. This method has been used on a routine scale for nearly two years.     

Field amplified sample stacking coupled with chip-based capillary electrophoresis using negative pressure sample injection technique

A multi-T microchip for integrated field amplified sample stacking (FASS) with CE separation to increase the chip-based capillary electrophoresis (chip-based CE) sensitivity was developed. Volumetrically defined large sample plug was formed in one step within 5s by the negative pressure in headspace of the two sealed sample waste reservoirs produced using a syringe pump equipped with a 3-way valve. Stacking and separation can proceed only by switching the 3-way valve to release the vacuum in headspace of the two sample waste reservoirs. This approach considerably simplified the operations and the equipments for FASS in chip-based CE systems. Migration time precisions of 3.3% and 1.3% RSD for rhodamine123 (Rh123) and fluorescien sodium salt (Flu) in the separation of a mixture of Flu and Rh123 were obtained for nine consecutive determinations with peak height precisions of 4.8% and 3.4% RSD, respectively. Compared with the chip-based CE on the cross microchip, the sensitivity for analysis of FlTC, FITC-labeled valine (Val) and Alanine (Ala) increased 55-, 41- and 43-fold, respectively.     

Large-volume sample stacking for analysis of ethylenediaminetetraacetic acid by capillary electrophoresis

A simple, quick, and sensitive capillary electrophoretic technique-large volume stacking using the electroosmotic flow (EOF) pump (LVSEP) - has been developed for determining ethylenediaminetetraacetic acid (EDTA) in drinking water for the first time. It is based on a precapillary complexation of EDTA with Fe(III) ions, followed by large-volume sample stacking and direct UV detection at 258 nm. The curve of peak response versus concentration was linear from 5.0 to 600.0 microg/L, and 0.7 to 30.0 mg/L. The regression coefficients were 0.9988 and 0.9990, respectively. The detection limit of the current technique for EDTA analysis was 0.2 microg/L with an additional 10-fold preconcentration procedure, based on the signal-to-noise ratio of 3. As opposed to the classical capillary zone electrophoresis (CE) method, the detection limit was improved about 1000-fold by using this LVSEP method. To the best of our knowledge, it represents the highest sensitivity for EDTA analysis via CE. Several drinking water samples were tested by this novel method with satisfactory results.     

Extremely highly efficient on-line concentration and separation of gold nanoparticles using the reversed electrode polarity stacking mode and surfactant-modified capillary electrophoresis

In this study, gold nanoparticles (Au NPs) were separated using the reversed electrode polarity stacking mode (REPSM) of a capillary electrophoresis (CE) system for on-line enhancement prior to performing surfactant-modified CE separation. Under optimized conditions [running electrolyte buffer, sodium dodecyl sulfate (70 mM) and 3-cyclohexylamino-1-propanesulfonic acid (10 mM) at pH 10.0; applied voltage, 20 kV; operating temperature, 25°C; REPSM strategy for sample on-line concentration; REPSM applied prior to initializing separation], two parameters were varied to further enhance the concentration and separation of the Au NPs: (i) the rate of polarity switching (from -20 to +20 kV) between the REPSM and surfactant-modified CE separation modes and (ii) the length of the capillary column. At a polarity switching rate of 1333 kV min(-1) and a column length of ca. 83.5 cm, the resolution of the separation of a mixture of 5.3- and 40.1-nm Au NPs was greater than 19; in addition, the numbers of theoretical plates for the 5.3- and 40.1-nm-diameter Au NPs were greater than 15,000 and up to 1.15×10(7), respectively-the latter being extremely high. Thus, this CE-based method for separating Au NPs provided high performance in terms of separation resolution and the number of theoretical plates, both of which were improved by greater than fivefold relative to those published previously. Notably, the sensitivity enhancement factors for the 5.3- and 40.1-nm-diameter Au NPs were improved (by ca. 20- and 500-fold, respectively) relative to those obtained using conventional surfactant-modified CE separation.     

Residue screening for the beta-agonists clenbuterol, salbutamol and cimaterol in urine using enzyme immunoassay and high-performance liquid chromatography.

The antibody for enzyme immunoassay was raised against clenbuterol-diazo-BSA, and salbutamol-carboxymethyl ether-biocytin was used as a label. Procedural blanks from 500 negative urine samples were always less than 0.2 ppb salbutamol or less than 0.02 ppb clenbuterol equivalents, and a residue level of 1 ppb was detected with good reliability. After treatment of veal calves with anabolic dosages, residue levels in urine amounted to 10-200 ppb clenbuterol or salbutamol. beta-Agonists were separated by high-performance liquid chromatography on LiChrospher RP-Select B columns, and acidic methanol-buffer or acetonitrile-buffer mobile phases. Combinations of high-performance liquid chromatography and enzyme immunoassay were used for confirmation.     

Confirmation of vanadium complex formation using electrospray mass spectrometry and determination of vanadium speciation by sample stacking capillary electrophoresis

Capillary zone electrophoresis (CZE) with UV detection was used to determine vanadium species. Nitrilotriacetic acid (NTA), hydroxyethylethylenediaminetriacetic acid (HEDTA), ethylenediaminetetraacetic acid (EDTA), diethylenetriaminepentaacetic acid (DTPA), ethylene glycol-bis(2-aminoethylether)-tetraacetic acid (EGTA) and 2,6-pyridinedicarboxylic acid (PDCA) were investigated to determine whether these ligands formed stable anionic complexes with vanadium. Of all the ligands studied HEDTA was the most suitable ligand because it gave the largest UV response with reasonable migration time. Electrospray mass spectrometry (ES-MS) was used to confirm the formation of [VO₂(HEDTA)]²⁻ and [VO(HEDTA)]¹⁻ in solution. An electrolyte containing 25 mM phosphate, 0.25 mM tetradecyltrimethylammonium bromide (TTAB) at pH 5.5 was optimum for the separation of these anionic vanadium complexes. Sample stacking techniques, including large-volume sample stacking (LVSS) and field-amplified sample injection (FASI), were tested to improve the sensitivity. Best sensitivity was obtained using FASI, with detection limits of 0.001 μM, equivalent to 0.4 μg L⁻¹, for [VO₂(HEDTA)]²⁻ and 0.01 μM, equivalent to 3.4 μg L⁻¹ for [VO(HEDTA)]¹⁻. The utility of the method for the speciation of V(IV) and V(V) was demonstrated using ground water samples.