Long-range nanometer-scale organization of semifluorinated alkane monolayers at the air/water interface

We have determined the structure formed at the air-water interface by semifluorinated alkanes (C(8)F(17)C(m)H(2m+1) diblocks, F8Hm for short) for different lengths of the molecule (m = 14, 16, 18, 20) by using surface pressure versus area per molecule isotherms, Brewster angle microscopy (BAM), and grazing incidence x-ray experiments (GISAXS and GIXD). The behavior of the monolayers of diblocks under compression is mainly characterized by a phase transition from a low-density phase to a condensed phase. The nonzero surface pressure phase is crystalline and exhibits two hexagonal lattices at two different scales: a long-range-order lattice of a few tens of nanometers lateral parameter and a molecular array of about 0.6 nm parameter. The extent of this organization is sufficiently large to impact larger scale behavior. Analysis of the various compressibilities evidences the presence of non organized molecules in the monolayer for all 2D pressures. At room temperature, the self-assembled structure appears generic for all the F8Hm investigated.     

DMPC与蛋白质在气-液界面上复合组装过程研究

对磷脂DMPC与蛋白质(β-lactoglobulin,β-casein或humanserumalbumin)组成的复合单分子膜在压缩过程中的相变进行了研究,同时通过Brewster角显微镜观察了磷脂与蛋白质在空气-水界面处发生的自组装过程。发现当低表面压时在DMPC/β-casein,DMPC/humanserumalbumin和DMPC/β-lactoglobulin复合单分子膜上分别出现线状和块状微区,而在较高表面压时只有DMPC/β-casein体系出现钩状的微区。说明微区的形貌与蛋白质的种类及构象变化有关。     

Studies on the electrical double layer structure at the water/air interface

Effective dipole moments (calculated from experimental data of surface tension and electric surface potential) of some homologous normal alcohols and carboxylic acid were found to vary linearly with the number of carbon atoms in the hydrocarbon chain. Values of effective dipole moments were used for the determination of the effective dipole moments of water molecules , and the dielectric permittivity of the water subphase (₁), as well as in the vicinity of the hydrophobic part of adsorbed molecule (₂). The latter was found to decrease with the increase of the hydrocarbon chain length. Knowing the effective dipole moment of surface water dipoles, the average orientation angle () of water molecules at the inteface was estimated. The calculated potential drop of water varies within the range –0.038 to –2.38 V for two extreme orientations of water dipoles at the surface.     

Ions at the air/water interface

In a recent review of this topic [B.C. Garett, Science 303 (2004) 1146] the emphasis was on some recent experiments, in which it was found that some anions accumulate at the air/water interface and not in the bulk, as usually happens to the cations, and on some simulations which explained those positive surface adsorption excesses. Because a large number of these experiments could be explained on the basis of some simple physical models proposed by the authors for the interaction between the ions and the air/water interface [M. Manciu, E. Ruckenstein, Adv. Colloid Interface Sci. 105 (2003) 63; Adv. Colloid Interface Sci. 112 (2004) 109; Langmuir 21 (2005) 11312], those models are reviewed in the present note, the goal being to draw attention to them.     

Surfactant layers at the air/water interface: structure and composition

The use of neutron reflectometry to study the structure and composition of surfactant layers adsorbed at the air/water interface is reviewed. A critical assessment of the results from this new technique is made by comparing them with the information available from all other techniques capable of investigating this interface.     

Nanoaggregate shapes at the air/water interface

Chiral interfaces and molecular recognition phenomena are of special interest not only for the understanding of biological recognition processes but also for the potential application in material science. Langmuir monolayers at the air-water interface have successfully been used as simple models to mimic biological phenomena. Recent experimental studies revealed that both chirality and molecular recognition processes of amphiphiles are controlling the features of the nano-aggregates at the air/water interface. The objective of experimental studies has been to gain information about the properties of mesoscopic length scale aggregates obtained on the basis of chiral discrimation effects and the formation of supramolecular entities by molecular recognition of non-surface active species dissolved in the aqueous subphase. Differences in the two-dimensional morphology and lattice structures of the nano-aggregates cannot be explained by macroscopic theories and needed information about the detailed orientation and distance dependence of the intermolecular interaction within the aggregates. First new bottom-up studies have been directed toward understanding the driving forces for the aggregation processes of monolayers. Different types of interactions have been successfully considered using semi-empirical quantum chemical methods. The possibilities of Langmuir-Blodgett (LB) patterning to be an alternative paradigm for large-area patterning with mesostructured features are discussed.     

Electronic states at the water/air interface

Using combined path integral-molecular dynamics simulation techniques, we analyze electronic solvation at the water/air interface. Superficial electrons present a considerable extent of spatial confinement, somewhat less marked but still comparable to that found in bulk. The characteristics of the interfacial polarization promote an overall structure for the solvated electron-polymer which looks flatter along the direction perpendicular to the interface. Spatial and orientational responses of different slabs in the close vicinity of the interface were also investigated. Solvent configurations obtained from the simulations have been used to analyze electronic excited states and the optical absorption spectrum of superficial electrons. Compared to bulk results, the distribution of bound electronic states at the surface presents similar characteristics, that is, a ground s-state and three, quasi-degenerate, p-like excited states. The reduction of the energy gap between the ground state and the rest of excited states leads to a approximately 0.52 eV red-shift in the position of the absorption maximum.     

Protein-lipid interactions at the air/water interface

Surface pressure measurements and external reflection FTIR spectroscopy have been used to probe protein-lipid interactions at the air/water interface. Spread monomolecular layers of stearic acid and phosphocholine were prepared and held at different compressed phase states prior to the introduction of protein to the buffered subphase. Contrasting interfacial behaviour of the proteins, albumin and lysozyme, was observed and revealed the role of both electrostatic and hydrophobic interactions in protein adsorption. The rate of adsorption of lysozyme to the air/water interface increased dramatically in the presence of stearic acid, due to strong electrostatic interactions between the negatively charged stearic acid head group and lysozyme, whose net charge at pH 7 is positive. Introduction of albumin to the subphase resulted in solubilisation of the stearic acid via the formation of an albumin-stearic acid complex and subsequent adsorption of albumin. This observation held for both human and bovine serum albumin. Protein adsorption to a PC layer held at low surface pressure revealed adsorption rates similar to adsorption to the bare air/water interface and suggested very little interaction between the protein and the lipid. For PC layers in their compressed phase state some adsorption of protein occurred after long adsorption times. Structural changes of both lysozyme and albumin were observed during adsorption, but these were dramatically reduced in the presence of a lipid layer compared to that of adsorption to the pure air/water interface.     

Two-dimensional self-assembly of linear molecular rods at the liquid/solid interface

We report on the synthesis and scanning tunneling microscopy (STM) studies of a series of linear molecular rods (1-5) comprising different numbers and/or spatial arrangements of perfluorinated benzene and benzene subunits interlinked with diacetylenes in the para position and decorated with or without terminal dodecyl chains. The molecules organize themselves into well-ordered 2D crystal structures at the liquid/solid interface through intermolecular and molecule-substrate interactions. Whereas the molecules substituted by dodecyl chains form the lamellar structures with alternating rigid core rows and alkyl chain rows, the unsubstituted ones change the orientation of the rigid backbones with respect to the lamellar axis. The molecular arrangement is not influenced by fluoro substituents on any phenyl ring of the backbone, which suggests that the interactions between the π-conjugated backbones are dominated by close packing rather than by the dipole moments of the rods or fluorine-based intermolecular interactions.     

Recent developments in the modeling of the monolayers structure at the water/air interface

Different models recently used to characterize adsorbed and Langmuir monolayers at the water/air interface are reviewed in this paper. Methods for the determination of the orientation of molecules at the surface are described and compared.     

Polymer/surfactant interactions at the air/water interface

The development of neutron reflectometry has transformed the study and understanding of polymer/surfactant mixtures at the air/water interface. A critical assessment of the results from this technique is made by comparing them with the information available from other techniques used to investigate adsorption at this interface. In the last few years, detailed information about the structure and composition of adsorbed layers has been obtained for a wide range of polymer/surfactant mixtures, including neutral polymers and synthetic and naturally occurring polyelectrolytes, with single surfactants or mixtures of surfactants. The use of neutron reflectometry together with surface tensiometry, has allowed the surface behaviour of these mixtures to be related directly to the bulk phase behaviour. We review the broad range of systems that have been studied, from neutral polymers with ionic surfactants to oppositely charged polyelectrolyte/ionic surfactant mixtures. A particular emphasis is placed upon the rich pattern of adsorption behaviour that is seen in oppositely charged polyelectrolyte/surfactant mixtures, much of which had not been reported previously. The strong surface interactions resulting from the electrostatic attractions in these systems have a very pronounced effect on both the surface tension behaviour and on adsorbed layers consisting of polymer/surfactant complexes, often giving rise to significant surface ordering.     

Surfactant headgroup orientation at the air/water interface

We have used vibrational sum-frequency spectroscopy to provide the first measurement of the spectrum and orientation of the polar headgroup of a charged alkyl surfactant at the air/water interface. Sum-frequency spectra of sodium dodecyl sulfate (SDS) are used to arrive at all participating elements of the second-order susceptibility tensor. We use these chi(2) elements, together with calculated values of the hyperpolarizability, to determine the tilt of the S-O bond attached to the alkyl chain and the twist of the S-O-C plane. Thus, a full characterization of the orientation of the surfactant headgroup has been achieved. This is the first demonstration of the feasibility of sum-frequency measurements of sulfate modes in the 1100 cm-1 region, opening possibilities for future investigations of surfactant behavior in this spectral region at aqueous and solid interfaces.     

Cationic Gemini surfactant at the air/water interface

The surface properties and structures of a cationic Gemini surfactant with a rigid spacer, p-xylyl-bis(dimethyloctadecylammonium bromide) ([C(18)H(37)(CH(3))(2)N(+)CH(2)C(6)H(4)CH(2)N(+)(CH(3))(2)C(18)H(37)],2Br(-), abbreviated as 18-Ar-18,2Br(-1)), at the air/water interface were investigated. It is found that the surface pressure-molecular area isotherms observed at different temperatures do not exhibit a plateau region but display an unusual "kink" before collapse. The range of the corresponding minimum compressibility and maximum compressibility modulus indicates that the monolayer is in the liquid-expanded state. The monolayers were transferred onto mica and quartz plates by the Langmuir-Blodgett (LB) technique. The structures of monolayers at various surface pressures were studied by atomic force microscopy (AFM) and UV-vis spectroscopy, respectively. AFM measurements show that at lower surface pressures, unlike the structures of complex or hybrid films formed by Gemini amphiphiles with DNA, dye, or inorganic materials or the Langmuir film formed by the nonionic Gemini surfactant, in this case network-like labyrinthine interconnected ridges are formed. The formation of the structures can be interpreted in terms of the spinodal decomposition mechanism. With the increase of the surface pressure up to 35 mN/m, surface micelles dispersed in the network-like ridges gradually appear which might be caused by both the spinodal decomposition and dewetting. The UV-vis adsorption shows that over the whole range of surface pressures, the molecules form a J-aggregate in LB films, which implies that the spacers construct a pi-pi aromatic stacking. This pi-pi interaction between spacers and the van der Waals interaction between hydrophobic chains lead to the formation of both networks and micelles. The labyrinthine interconnected ridges are formed first because of the rapid evaporation of solvent during the spreading processes; with increasing surface pressure, some of the alkyl chains reorient from tilting to vertical, forming surface micelles dispersed in the network-like ridges due to the strong interaction among film molecules.     

Cyclodextrin-based self-assembled nanotubes at the water/air interface

Native alpha-cyclodextrin (alpha-CD) is found to spontaneously form films at aqueous solution/air interfaces. Shape-response measurements to volume perturbations on drops hanging from a capillary indicate that temperature and sodium dodecyl sulfate (SDS) concentration strongly modify the viscoelastic properties of such films. By using isothermal titration calorimetry (ITC), Brewster angle microscopy (BAM), atomic force microscopy (AFM), and molecular dynamics (MD) simulations, it is shown that the films consist of self-assembled nanotubes whose building blocks are cyclodextrin dimers (alpha-CD2) and alpha-CD2-SDS1 complexes.     

Gemini surfactants at the air/water interface: a fully atomistic molecular dynamics study

Gemini surfactants typically consist of two single-chain surfactants chemically linked by a spacer molecule. We report herein the results of fully atomistic molecular dynamics (MD) simulations of a series of Gemini surfactants: CsH2s-alpha,omega-bis(C12H25N+(CH3)2Cl-), at the air/water interface with s = 3, 4, 6, 12, 14, and 16, at values of the initial surface area per surfactant AS = 70 A2, 77 A2, 95 A2, 151 A2, 133 A2, and 103 A2, respectively. The AS values employed were obtained from surface tension and neutron reflection experiments at the respective cmc of each surfactant. The Gemini surfactant corresponding to s = 3 was also simulated at AS = 105 A2, which is the experimentally derived value of surface area per surfactant at 1/10th of cmc. Only the surfactants with s = 12 and 14 and the surfactant with s = 3 at AS = 105 A2 gave a stable monolayer at the air/water interface. In other cases, we observe movement of some surfactant molecules from the air/water interface into the aqueous phase, resulting in a stable primary monolayer of surfactants at the air/water interface and a small concentration of surfactant molecules below it. The latter form aggregates, with their hydrophobic chains in the core. The density profiles along the normal to the interface are compared with the ones obtained from neutron reflection experiments. The MD simulations confirm the bending of the spacer toward the hydrophobic chains as the spacer length is increased and the spacer becomes more hydrophobic. The simulations have helped to shed light on the low-resolution picture which emerges from experimental analyses.     

The structure of adsorbed films of some aliphatic compounds at the water/air interface

Electric surface potential (V) and surface tension measurements of aqueous solutions of some aliphatic compounds were used to determine the surface activity, orientation of molecules at the water/air interface, effective dipole moments (connected with water molecules, hydrophilic and hydrophobic groups), and local dielectric permittivities of the surface layer.     

Superposition-additive approach in the description of thermodynamic parameters of formation and clusterization of substituted alkanes at the air/water interface

The superposition-additive approach developed previously was shown to be applicable for the calculations of the thermodynamic parameters of formation and atomization of conjugate systems, their dipole polarizability, molecular diamagnetic susceptibility, π-electronic ring currents, etc. In the present work, the applicability of this approach for the calculation of the thermodynamic parameters of formation and clusterization at the water/air interface of alkanes, fatty alcohols, thioalcohols, amines, nitriles, fatty acids (C_nH_2n+1X, X is the functional group) and cis-unsaturated carboxylic acids (C_nH_2n−1COOH) is studied.Using the proposed approach the thermodynamic quantities determined agree well with the available data, either calculated using the semiempirical (PM3) quantum chemical method, or obtained in experiments. In particular, for enthalpy and Gibbs’ energy of the formation of substituted alkane monomers from the elementary substances, and their absolute entropy, the standard deviations of the values calculated according to the superposition-additive scheme with the mutual superimposition domain C_n−2H_2n−4 (n is the number of carbon atoms in the alkyl chain) from the results of PM3 calculations for alkanes, alcohols, thioalcohols, amines, fatty acids, nitriles and cis-unsaturated carboxylic acids are respectively: 0.05, 0.004, 2.87, 0.02, 0.01, 0.77, and 0.01 kJ/mol for enthalpy; 2.32, 5.26, 4.49, 0.53, 1.22, 1.02, 5.30 J/(mol K) for absolute entropy; 0.69, 1.56, 3.82, 0.15, 0.37, 0.69, 1.58 kJ/mol for Gibbs’ energy, whereas the deviations from the experimental data are: 0.52, 5.75, 1.40, 1.00, 4.86 kJ/mol; 0.52, 0.63, 1.40, 6.11, 2.21 J/(mol K); 2.52, 5.76, 1.58, 1.78, 4.86 kJ/mol, respectively (for nitriles and cis-unsaturated carboxylic acids experimental data are not available). The proposed approach provides also quite accurate estimates of enthalpy, entropy and Gibbs’ energy of boiling and melting, critical temperatures and standard heat capacities for several classes of substituted alkanes.For the calculation of thermodynamic functions of clusterization of dimers, trimers and tetramers of fatty alcohols, thioalcohols, amines, carboxylic acids and cis-unsaturated carboxylic acids two superposition-additive schemes are proposed which ensure the correct superimposition of the molecular graphs, including intermolecular hydrogen-hydrogen interactions in the clusters. The calculations involve the thermodynamic parameters of clusterization obtained earlier by the PM3 method. It is shown that the proposed approach reproduces quite accurately the values calculated earlier and is applicable for the prediction of the thermodynamic parameters of the formation of surfactant monolayers.     

Ionic self-assembly of surface functionalized metal-organic polyhedra nanocages and their ordered honeycomb architecture at the air/water interface

Metal-organic polyhedra (MOP) nanocages were successfully surface functionalized via ionic self-assembly and the ordered honeycomb architecture of the encapsulated MOP nanocages was also fabricated at the air/water surface. The results provide a novel synthetic method and membrane processing technique of amphiphilic MOP nanocages for various applications.