分子印迹聚合物固相萃取研究进展

对最新报道的分子印迹聚合物作为固相萃取剂及其在色谱样品前处理方面的应用进行综述和展望,主要包括固相萃取、基质固相分散萃取、固相微萃取、搅拌棒吸附萃取和磁性材料萃取,同时总结了分子印迹聚合物制备技术面临的挑战和问题,提出了可能的解决方案。     

吡虫啉分子印迹聚合物的合成及固相萃取性能研究

采用分子印迹技术,以丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在甲醇溶液中合成了吡虫啉分子印迹聚合物,研究了聚合物的吸附性和选择性,用聚合物固相萃取大蒜中吡虫啉残留量。结果表明,聚合物通过离子键和氢键对模板分子产生了印迹效应,对吡虫啉具有明显的选择性。通过优化淋洗和洗脱条件,对大蒜中的残留吡虫啉富集。     

扑热息痛分子印迹聚合物应用于固相萃取的研究

以扑热息痛为印迹分子,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸酯为交联剂合成了棒状的印迹聚合物;把其装于自制的固相萃取柱中,研究了以乙腈和水为溶剂时扑热息痛在柱上的保留行为;通过优化清洗、洗脱条件,使扑热息痛和与其具有相似结构的非那西丁、对叔丁基苯酚在柱上得到了很好的分离;同时也测定了治疗感冒的药物海王银得菲中扑热息痛的含量,其回收率可达94．3％．     

赛庚啶-分子印迹聚合物的制备及其固相萃取研究

以赛庚啶为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,通过优化致孔剂、单体及模板与单体摩尔比等因素,合成了对赛庚啶具有高选择性的分子印迹聚合物,其表面积达24.9 m2/g。制备的印迹聚合物固相萃取小柱(MISPE)依次以甲醇和水活化小柱,水溶液上样,水和甲醇依次洗涤,氨化甲醇(5∶95,V/V)洗脱,赛庚啶在制备MISPE小柱上的回收率为94.0%,而非分子印迹小柱(NISPE)的回收率仅为38.9%;MISPE结合赛庚啶的容量达8.8 mg/g,印迹因子约为2.32。在优化的固相萃取条件下,10 mg/L赛庚啶、阿米替林、磺胺嘧啶和甲氧苄啶混合标准溶液上样,进行选择性实验。以0.05%戊烷磺酸钠溶液和乙腈为流动相,梯度洗脱,在MISPE小柱上,与CYP化学结构差异较大的磺胺嘧啶和甲氧苄啶回收率均小于10%,结构相似的阿米替林回收率达70%,赛庚啶回收率大于90%;4种分析物在NISPE小柱上的回收率均小于30%。制备的MISPE小柱应用于畜禽饮用水样中赛庚啶的分离富集和分析测定,方法回收率为80.5%~97.7%,检出限达0.01 mg/L。     

非那西汀印迹聚合物固相萃取性能研究

研究非那西汀分子印迹聚合物的固相萃取性能。用本体聚合法制备非那西汀分子印迹聚合物,通过静态平衡吸附试验及固相萃取试验,研究其固相萃取性能。非那西汀模板聚合物的吸附能力明显强于空白聚合物。模板聚合物对浓度为0.03mmol/L的非那西汀标准溶液一次性萃取率为74.2%。非那西汀印迹聚合物对非那西汀具有特异性识别性能,可作为固相萃取固定相的应用研究。     

替米考星分子印迹聚合物的制备及其固相萃取研究

以泰乐菌素为虚拟模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了对替米考星具有高选择性的分子印迹聚合物。考察了二甲基甲酰胺、甲醇、丙酮和氯仿4种致孔剂对合成聚合物性能的影响。通过正交实验优化的聚合配方为:1.0mmol泰乐菌素,8.0mmol甲基丙烯酸,20.0mmol乙二醇二甲基丙烯酸酯,6.0mL氯仿,20.0mg偶氮二异丁腈。研究了将该聚合物作为固相萃取填料分离、富集替米考星的萃取条件和萃取性能。当萃取柱依次用甲醇和水(pH9.0)活化,乙腈溶液上样,甲醇和氯仿分别洗涤,3mL氨化甲醇(95:5,V/V)洗脱时,替米考星在分子印迹固相萃取柱上的回收率达到90%以上,而非分子印迹固相萃取柱的回收率仅为32%。     

马拉硫磷分子印迹聚合物的制备及其在固相萃取中的应用

以马拉硫磷为模板分子,采用原位逐步聚合法制备了具有良好识别性能的分子印迹聚合物(MIPs),考察了马拉硫磷、甲基对硫磷、对硫磷及甲胺磷在马拉硫磷聚合物的选择性分离富集特性。用聚合物固相萃取了蜂蜜、蔬菜和天然水中的马拉硫磷。结果表明,聚合物对模板分子产生了印迹效应,对马拉硫磷有明显的选择性。流速为1.0 mL/min,进...     

槲皮素表面分子印迹聚合物的制备及其应用研究

以接枝双键的凹凸棒土(TM)为载体,槲皮素为模板分子,采用表面印迹技术制备对槲皮素具有特异吸附性能的分子印迹聚合物(MIP)。利用光谱法选择实验条件及对化合物表征。采用静态法研究聚合物对槲皮素的结合性能与识别性能。结果表明,该分子印迹材料对槲皮素具有特异的识别特性和优良的亲和性,提高了传统聚合物的结合率。以该印迹聚合物为固相萃取材料,结合高效液相色谱法,对白菜中的槲皮素进行分离富集,方法回收率为84.0%~90.6%,相对标准偏差低于5.6%。     

克百威分子印迹固相萃取微球的制备及性能

以偶氮二异丁腈为引发剂,2~3μm的聚苯乙烯微球为种球,克百威为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用单步溶胀法制备粒径均一的克百威分子印迹聚合物微球(MIPMs)。通过扫描电镜(SEM)、吸附平衡实验和竞争吸附实验分析了克百威MIPMs的形貌及其对克百威的结合特性及吸附选择性,并比较了克百威分子印迹固相萃取柱(MISPE)与C18固相萃取柱(C18SPE)富集水中克百威的效果。结果表明:合成的MIPMs粒径约10μm,表面呈蜂窝状;在90min内可达到饱和吸附,最大吸附量为25.94mg/g;在克百威、灭多威和三羟基克百威共存的条件下,克百威MIPMs可实现对克百威的专一性吸附;与C18SPE相比,克百威MISPE重复使用6次后加标回收率仍在85%以上,可用于水体中痕量克百威的检测。     

利多卡因分子印迹聚合物的制备及其在固相萃取中的应用

以利多卡因(LD)分子印迹聚合物为研究体系,利用分子模拟计算功能单体与模板分子之间的相互作用能,并通过作用实验加以验证,确定衣康酸为最佳单体。以乙二醇二甲基丙烯酸酯为交联剂,N,N-二甲基甲酰胺(DMF)为溶剂,采用本体聚合法合成分子印迹聚合物(MIP);采用高效液相色谱检测。实验发现,聚合物具有较高的印迹指数和选择性;在乙腈加载、5%甲醇-乙腈淋洗、5%HCl-甲醇洗脱条件下,聚合物具有最佳印迹效果。通过渗漏实验考察聚合物键合容量。实验发现,在乙腈溶液中每100mg MIP与空白聚合物(NIP)可分别键合1.62和0.92mg LD分子;采用光度法测定牛血清中利多卡因的含量,其平均回收率达到84.6%。     

Quercetin molecularly imprinted polymers: Preparation, recognition characteristics and properties as sorbent for solid-phase extraction

Molecular imprinted polymers (MIPs) were prepared through thermal polymerization by using quercetin as the template molecule, acrylamide (AA) as the functional monomer and ethylene glycol dimethacrylate (EDMA) as the cross-linker in the porogen of tetrahydrofuran (THF). The synthesized MIPs were identified by both Fourier transform infrared (FTIR) and scanning electron microscope (SEM). Systematic investigations of the influences of key synthetic conditions, including functional monomers, porogens and cross-linkers, on the recognition properties of the MIPs were conducted. Scatchard analysis revealed that the homogeneous binding sites were formed in the polymers. Besides quercetin, two structurally similar compounds of rutin and catechol were employed for molecular recognition specificity tests of MIPs. It was observed that the MIPs exhibited the highest selective rebinding to quercetin. Accordingly, the MIPs were used as a solid-phase extraction (SPE) sorbent for the extraction and enrichment of quercetin in cacumen platycladi samples, followed by HPLC-UV analysis. The application of MIPs with high affinity and excellent stereo-selectivity toward quercetin in SPE might offer a novel method for the enrichment and determination of flavonoid compounds in the natural products.     

Molecularly imprinted polymer as SPE sorbent for selective extraction of melamine in dairy products

In this paper, a highly selective sample cleanup procedure combining molecular imprinting and solid-phase extraction (MI-SPE) was developed for the isolation of melamine in dairy products. The molecularly imprinted polymer (MIP) was prepared using melamine as the template molecule, methacrylic acid as the functional monomer and ethylene glycol dimethacrylate as the cross-linking monomer. The melamine imprinted polymer was used as selective sorbent for the solid-phase extraction of melamine from dairy products. An off-line MI-SPE method followed by high-performance liquid chromatography with diode-array detection for the detection of melamine was also established. The mean recoveries of melamine from ultra-heat treatment (UHT) milk and milk powders were 92.9-98.0% and 91.6-102.8%, respectively. Good linearity was obtained from 0.5 μM to 10 μM (r > 0.999) with a quantitation limit of 0.5 μmol/L (0.06 ppm) which was sufficient to analyse melamine at the maximum level permitted by U.S. Food and Drug Administration (1 ppm) in dairy products. It was demonstrated that the proposed MI-SPE-HPLC method could be applied to direct determination of melamine in dairy products.     

Synthesis of surface molecularly imprinted polymer and the selective solid phase extraction of imidazole from its structural analogs

A surface molecularly imprinted polymer (MIP) was synthesized by using imidazole as the template and modified silica particles as the support material. The static adsorption, solid phase extraction (SPE) and high-performance liquid chromatography (HPLC) experiments were performed to investigate the adsorption properties and selective recognition characteristics of the polymer for imidazole and its structural analogs. It was shown that the maximum binding capacities of imidazole on the MIP and the non-imprinted polymer (NIP) were 312 and 169 μmol g⁻¹, respectively. The adsorption was fast and the adsorption equilibrium was achieved in 30 min. The binding process could be described by pseudo-second order kinetics. Compared with the corresponding non-imprinted polymer, the molecularly imprinted polymer exhibited much higher adsorption performance and selectivity for imidazole. The selective separation of imidazole from a mixture of 1-hexyl-3-methylimidazolium bromide ([C₆mim][Br]) and 2,4-dichlorophenol could be achieved on the MIP-SPE column. The recoveries of imidazole and [C₆mim][Br] were 97.6-102.7% and 12.2-17.3%, respectively, but 2,4-dichlorophenol could not be retained on the column. The surface molecularly imprinted polymer presented here may find useful application as a solid phase absorbent to separate trace imidazole in environmental water samples. This may also form the basis for our research program on the preparation and application of alkyl-imidazolium imprinted polymers.     

尼泊金乙酯分子印迹固相萃取小柱的研制及应用

研制了一种对尼泊金乙酯具有特异性识别性能的分子印迹固相萃取小柱。用本体聚合法制备尼泊金乙酯分子印迹聚合物,通过静态平衡吸附实验及固相萃取实验表征其固相萃取性能,并结合UV法对滴眼液中的尼泊金乙酯进行测定。结果显示,尼泊金乙酯模板聚合物的吸附能力强于空白聚合物;印迹固相萃取柱对尼泊金乙酯标准溶液(0.04mmol/L)一...     

Synthesis and application of a carbamazepine-imprinted polymer for solid-phase extraction from urine and wastewater

A molecularly imprinted polymer (MIP) designed to enable the selective extraction of carbamazepine (CBZ) from effluent wastewater and urine samples has been synthesised using a non-covalent molecular imprinting approach. The MIP was evaluated chromatographically in the first instance and its affinity for CBZ also confirmed by solid-phase extraction (SPE). The optimal conditions for SPE consisted of conditioning of the cartridge using acidified water purified from a Milli-Q system, loading of the sample under basic aqueous conditions, clean-up using acetonitrile and elution with methanol. The attractive molecular recognition properties of the MIP gave rise to good CBZ recoveries (80%) when 100 mL of effluent water spiked with 1 μg L⁻¹ was percolated through the polymer. For urine samples, 2 mL samples spiked with 2.5 μg L⁻¹ CBZ were extracted with a recovery of 65%. For urine, the linear range was 0.05-24 mg L⁻¹, the limit of detection was 25 μg L⁻¹ and precision, expressed as relative standard deviation at 0.5 mg L⁻¹ (n = 3), was 3.1% and 12.6% for repeatability and reproducibility between days, respectively.     

Synthesis and application of a molecularly imprinted polymer in the solid-phase extraction of ketoprofen from wastewater

Ketoprofen is a nonsteroidal anti-inflammatory drug widely consumed by humans as it possesses analgesic activities. A selective molecularly imprinted polymer (MIP) for ketoprofen was synthesized and applied as a solid-phase extraction sorbent. MIP was synthesized using 2-vinylpyridine, ethylene glycol dimethacrylate, 1,1′-azobis(cyclohexanecarbonitrile), toluene/acetonitrile (9:1, v/v), and ketoprofen as a functional monomer, cross-linker, initiator, porogenic mixture, and template, respectively. The polymerization was performed at 60 °C for 16 h, and thereafter the temperature was increased to 80 °C for 24 h to achieve a solid monolith polymer. Nonimprinted polymer was synthesized in a similar manner with the omission of ketoprofen. Characterization with thermogravimetric analysis and X-ray diffraction showed that the synthesized polymers were thermally stable and amorphous. Solid-phase extraction cartridges packed with MIP were used with high-performance liquid chromatography for quantitative analysis of ketoprofen in wastewater. The analytical method gave detection limits of 0.23, 0.17, and 0.09 μg/L in wastewater influent, effluent, and deionized water, respectively. The recovery for the wastewater influent and effluent spiked with 5 μg/L of ketoprofen was 68%, whereas 114% was obtained for deionized water. The concentrations of ketoprofen in the influent and effluent samples were in the ranges of 22.5–34.0 and 1.14–5.33 μg/L, respectively. Overall, the analytical method for the analysis of ketoprofen in wastewater was rapid, affordable, accurate, precise, sensitive, and selective.     

Rational design and synthesis of water-compatible molecularly imprinted polymers for selective solid phase extraction of amiodarone

Novel water-compatible molecularly imprinted polymers (MIPs) selective for amiodarone (AD) were designed via a new methodology which relies on screening library of non-imprinted polymers (NIPs). The NIP library consisted of eighteen cross-linked co-polymers synthesized from monomers commonly used in molecular imprinting. The binding capacity of each polymer in the library was analyzed in two different solvents. Binding in water was used to assess non-specific (hydrophobic) interactions and binding in an appropriate organic solvent was used to assess specific interactions. A good correlation was found between the screening tests and modeling of monomer–template interactions performed using computational approach. Additionally, analysis of template–monomer interactions was performed using UV–vis spectroscopy. As the result, 4-vinylpyridine (4-VP) was selected as the best monomer for developing MIP for AD. The 4-VP-based polymers demonstrated imprinting factor equal 3.9. The polymers performance in SPE was evaluated using AD and its structural analogues. The recovery of AD was as high as 96% when extracted from spiked phosphate buffer (pH 4.5) solution and 82.1% from spiked serum samples. The developed MIP shown as a material with specific binding to AD, comparing to its structural analogues, 1-(2-diethylaminoethoxy)-2,6-diiodo-4-nitrobenzene and lidocaine, which shown 9.9% and 25.4% of recovery from the buffer solution, correspondingly. We believe that the screening of NIP library could be proposed as an alternative to commonly used computational and combinatorial approaches.     

Preparation and evaluation of molecularly imprinted ionic liquids polymer as sorbent for on-line solid-phase extraction of chlorsulfuron in environmental water samples

In this report, vinylimidazolium ionic liquid as a functional monomer for preparation of chlorsulfuron (CS) imprinted polymers were first studied. The imprinted materials showed high selectivity for CS, and fast kinetics so that adsorption equilibrium was achieved within 5 min. These materials have been further employed to detect trace CS from water samples by online preconcentration coupled with HPLC. The sorbent offered good linearity (0.005-30 μg L(-1), r(2)>0.99) for on-line solid-phase extraction of trace chlorsulfuron. Under the optimal experimental conditions, the recovery for chlorsulfuron was in the range of 81.0-110.1% for the water samples, with RSDs ranging from 1.2 to 7.6%.