Time dependence of isothermal magnetization in single-phase B1 MoCy encapsulated in multiwall carbon nanocages

Isothermal magnetization M(t) in nanocrystalline single-phase B1 MoC_y encapsulated in multiwall carbon nanocages is studied within the time window of 100 < t < 5000 s. The current density J exhibits a linear logarithmic time decay. The effective activation energy U_eff increases linearly with increasing temperature T, and decreases linearly with increasing J. The behaviors of J(t), U_eff(T), and U_eff(J) can be described by the Anderson–Kim flux-creep model for thermally activated motion of uncorrelated vortices or vortex bundles over a net potential barrier U_eff. The slower relaxation of current density above the broad peak field in the isothermal magnetization curves suggests that the peak is a result of vortex dynamics.     

Magnetic viscosity-coercivity relation for Fe1−xCox fine particles

The variation of the applied field results in a subsequent change of magnetization with time. There is a relationship between the coercivity (H_c), as the equilibrium characteristic of the system, and its magnetic stability (1/S), as a parameter characterizing the time dependence. 1/S as a function of H_c has been measured and studied for different Fe_1−xCo_x samples. We synthesized several samples with different values of x by applying various magnetic fields during the grains’ growth, and observed a linear relationship between 1/S and H_c.     

Enhancement of L10 ordered FePt by Pt buffer layer

L₁₀-ordered FePt thin films prepared by molecular-beam epitaxy on MgO (0 0 1) substrate at 320 °C with different thickness of Pt buffer layer have been investigated. The out-of-plane coercivity increases with increasing thickness of Pt buffer. The maximum values of the long-range order parameter and uniaxial magnetic anisotropy energy are 0.72 and 1.78×10⁷ erg/cm³, respectively, for films with 12 nm thick Pt buffer layer, where the c/a ratio (0.976) shows the minimum value. The reason for the enhancement in ordering is due to the proper lattice strains Pt buffer bestows on FePt layer, these strains are equal to the contraction in lattice parameter c and the expansion in a. Studies of angular-dependent coercivity revealed that the magnetization reversal behaviour shifts from a domain-wall motion dominated case towards a near rotational mode with increasing thickness of Pt buffer layer.     

Fabrication and structure: a study of aligned carbon nanotube/carbon nanocomposites

Aligned carbon nanotube/carbon (Acnt/C) nanocomposites have been fabricated by densifying an Acnt preform with chemical vapour infiltration technology. Microstructure observations show that pyrocarbon in Acnt/C was mainly rough lamella type while pyrocarbon in carbon fiber reinforced carbon matrix (C/C) composites was typically smooth lamella type in spite of the same process. The thermal conductivity of these Acnt/C nanocomposites is about 4 times that of C/C composites. Their electrical conductivity of Acnt/C nanocomposites was anisotropic, i.e. approximately 1.61×10⁴ Ω⁻¹ m⁻¹ and 5.68×10³ Ω⁻¹ m⁻¹ in the direction parallel and vertical to the aligned carbon nanotubes, respectively.     

Magnetic and electrical properties of new magnetic phase in Si1−xMnx crystals

We have investigated the magnetic and electrical transport properties of Si_1−xMn_x single crystals grown by the vertical Bridgman method. The alloys with Mn concentrations up to x=0.64 have weak ferromagnetic ordering around T_C∼30 K. However, Si_0.25Mn_0.75 alloys show weak ferromagnetic ordering at 70 K and antiferromagnetic ordering at 104 K, which is confirmed by magnetization and electrical transport studies.     

Low-temperature ordering of L10 FePt phase in FePt thin film with AgCu underlayer

FePt (20 nm) films with AgCu (20 nm) underlayer were prepared on thermally oxidized Si (0 0 1) substrates at room temperature by using dc magnetron sputtering, and the films annealed at different temperature to examine the disorder–order transformation of the FePt films. It is found that the ordered L1₀ FePt phase can form at low annealing temperature. Even after annealing at 300 °C, the in-plane coercivity of 5.2 kOe can be obtained in the film. With increase in annealing temperature, both the ordering degree and coercivity of the films increase. The low-temperature ordering of the films may result from the dynamic stress produced by phase separation in AgCu underlayer and Cu diffusion into FePt phase during annealing.     

Magnetic behavior of the II-V-diluted magnetic semiconductor Cd1−xMnxSb

Polycrystalline samples of the II-V-diluted magnetic semiconductor Cd_1−xMn_xSb (x=0.05-0.20) were synthesized. Standard high temperature ceramic methods under an inert atmosphere were utilized for sample fabrication. Structural characterization was done using X-ray diffractometry (XRD), which indicated that a simple substitution of Mn for Cd is probably not occurring. Hysteresis, ac susceptibility, dc magnetization, and spontaneous magnetization measurements were performed for Cd_0.90Mn_0.10Sb. The hysteresis data indicated the presence of a ferromagnetic component. Ferromagnetism in the Cd_0.90Mn_0.10Sb system is likely due to two sources: Mn spins in small Mn-rich regions and a small amount of MnSb in a minority phase. Analysis of the spontaneous magnetization as a function of temperature for Cd_0.90Mn_0.10Sb yielded the value 0.172 for the critical exponent β. In MnSb, β was found to have the value 0.379, which is close to the theoretical value for 3D-Heisenberg systems. Thus, in Cd_0.90Mn_0.10Sb, the ferromagnetism is not of the 3D-Heisenberg type; rather, it is closer to 2D Ising behavior, indicating reduced effective dimensionality.     

Magnetic properties of the compounds ThCO2Ge2 and ThCo2Si2

Rather old preparation of the compounds ThCo₂Ge₂ and ThCo₂Si₂ and their magnetic study in the temperature range 100–570 K, published by Omejec and Ban [Z. Anorg. Allg. Chem. 380 (1971) 111], indicated that both compounds ordered ferrromagnetically below 100 K. In order to verify the old data, polycrystalline samples of ThCo₂Ge₂ and ThCo₂Si₂ have been prepared by arc melting and subsequent annealing, and studied by X-ray diffraction at room temperature (RT), by superconducting quantum interference device (SQUID)-magnetization and AC-susceptibility measurements at 2–320 K, and by dc-magnetization measurements in variable magnetic fields up to 120 kOe at 5, 80, and 283 K. The magnetic measurements confirm the ferromagnetic ordering in both compounds, but with totally different Curie temperatures: ≈120(20) K for ThCo₂Ge₂ and above 320 K for ThCo₂Si₂. The paramagnetic values of ThCo₂Ge₂ and the ordering of both compounds are discussed and compared with the old results of Omejec and Ban.     

Low-field EPR studies of levels near the top of the barrier in Mn12-acetate reveal a new magnetization relaxation pathway

We show that X-band electron paramagnetic resonance (EPR) measurements using a dual-mode resonance cavity can directly probe the levels near the top of the magnetization reversal barrier in the single-molecule magnet (SMM) Mn₁₂-acetate. The observed transitions are much sharper than those reported in high-field EPR studies. The observed temperature dependence of the line positions points to the presence of a spin-diffusional mode. The correlation time for such fluctuations is of the order of 6×10⁻⁸ s at 10 K, and follows an Arrhenius activation energy of 35-40 K. These results open a new avenue for understanding the mechanism of tunneling and spin-lattice relaxations in these SMMs.     

Transmission electron microscopy study of large field induced anisotropy (Co1−xFex)89Zr7B4 nanocomposite ribbons with dilute Fe-contents

Electron microscopy was employed to investigate the structure of magnetic field crystallized (Co_1−xFe_x)₈₉Zr₇B₄ alloys with only dilute Fe-contents (x=0, 0.025, 0.05, and 0.10). The x=0.025 and 0.05 alloys exhibit very large field induced anisotropies and multiple nanocrystalline phases (BCC, FCC, and HCP) surrounded by an intergranular amorphous phase. Correlation between the volume fraction crystallized and the measured value of H_K suggests that the large K_U values are associated with the crystalline phases that form. Multiple crystalline phases are present for the highest K_U alloys and so the presence of FCC and/or HCP-type nanocrystals may be responsible for these observations. High-resolution transmission electron microscopy (HRTEM) illustrates a number of microstructural features including (1) high densities of stacking faults in many of the FCC and, in particular, the HCP-type nanocrystals, (2) infrequent BCC/FCC orientation relationships, and (3) nanocrystals with disordered or long period stacking sequences of close-packed planes. High densities of planar faults are suggested as a potential source of K_U for the FCC and HCP-type nanocrystals, but the origin of the large values of K_U found in dilute Fe-containing, Co-rich “nanocomposite” alloys is an area where further work is needed.     

Permeability-frequency spectra of (Fe1−xcox)73.5Cu1Nb3Si13.5B9 nanocrystalline alloys under different magnetic fields

Under various amplitude of AC magnetic fields domain wall motion is the main mechanism in the magnetization process. This includes domain wall bulging and domain wall displacing. In this paper complex permeability-frequency spectra of (Fe_1−xCo_x)_73.5Cu₁Nb₃Si_13.5B₉ (x=0,0.5$x=0,0.5$) nanocrystalline alloys were measured as a function of the AC magnetic field, ranging from 0.001 to 0.04 Oe. Obvious changes have been found in complex permeability spectra for alloy x=0$x=0$ with the change of the amplitude of AC magnetic field, but variation of AC magnetic field has little effect on complex permeability spectra for alloy x=0.5$x=0.5$. This is attributed to the increased pinning field after substitution of Fe with Co in Fe_73.5Cu₁Nb₃Si_13.5B₉ nanaocrystalline alloy.     

Magnetic properties of Fe/Pt films by symmetrical insertion of Ag

Ultrathin Ag (0.5 nm) pinning layers (APLs) were symmetrically inserted into [Fe/Pt] bilayers to introduce controllable defects on the interfaces between Ag and Fe/Pt multilayers. The highest coercivity 7700 Oe and remanent squareness 0.95 were obtained with five APLs. The large enhancement in coercivity (75% increment compared with that without APL) is due to the relative uniform defects that introduced pinning effects on the interfaces between the APLs and Fe/Pt multilayers. According to the distribution of angule- dependent coercivity of Fe/Pt multilayers without and with APLs, a tendency is suggested of weakened domain-wall motion while enhanced rotation of reverse domain mode.     

Soft magnetic properties and giant magneto-impedance effect of Fe73.5−xCrxSi13.5B9Nb3Au1 (x=1–5) alloys

In this paper, the effect of microstructural and surface morphological developments on the soft magnetic properties and giant magneto-impedance (GMI) effect of Fe_73.5−xCr_xSi_13.5B₉Nb₃Au₁ (x=1, 2, 3, 4, 5) alloys was investigated. It was found that the Cr addition causes slight decrease in the mean grain size of α-Fe(Si) grains. AFM results indicated a large variation of surface morphology of density and size of protrusions along the ribbon plane due to structural changes caused by thermal treatments with increasing Cr content. Ultrasoft magnetic properties such as the increase of magnetic permeability and the decrease of coercivity were observed in the samples annealed at 540 °C for 30 min. Accordingly, the GMI effect was also observed in the annealed samples.     

Temperature dependence of electron magnetic resonance and magnetization in NiO nanorods

For NiO nanorods of 5 nm diameter prepared by sol-gel technique, variations of the magnetization M with temperature T (5-370 K) and magnetic field H up to 55 kOe are reported. Also, temperature variations of the EMR (electron magnetic resonance) parameters (intensity I₀, linewidth ΔH and resonance field H_r) of an observed line due to uncompensated spins are followed for The M vs. H and T variations yield a blocking above which the data fits modified Langevin function with magnetic moment μ_p?1240 μ_B/particle. For the EMR line, I₀ decreases rapidly for T<T_B, and the line broadens and shifts to lower H with lowering T, following the lineshift δH_r=(ΔH)ⁿ with n?2.8. This is close to the value of n=3 expected for randomly oriented particles.     

Transport and magnetotransport properties of Mn-doped InxGa1−xAs/GaAs quantum well structures

We report on the transport, magnetotransport and magnetic properties of In_0.17Ga_0.83As quantum well in GaAs δ-doped by Mn. At low temperatures, the anomalous Hall effect was observed which detects the spin-polarized carriers. Negative magnetoresistance was found at low temperatures, which became positive at high temperature.     

Extracting anisotropy energy barrier distributions of nanomagnetic systems from magnetization/susceptibility measurements

Anisotropy barrier distributions of single domain particle systems are an important issue in the nanomagnetism and its applications. Different methods to extract the distribution from temperature, field, or time-dependent magnetization/susceptibility are reviewed and compared. A single domain particle system is measured to test the methods.     

Local chemical distribution and electronic structure of Ge1−xTx DMS single crystals (T=Cr,Mn, Fe)

The spatial concentration distribution and local electronic structure of ferromagnetic Ge_1−xT_x (T=Cr, Mn, Fe) DMS single crystals have been investigated by using scanning photoelectron microscopy (SPEM), X-ray absorption spectroscopy (XAS), and photoemission spectroscopy (PES). It is found that doped T ions in Ge_1−xT_x crystals are chemically phase-separated, suggesting that the observed ferromagnetism arises from the phase-separated T-rich phases in Ge_1−xT_x.     

Anisotropy dispersion in (CoCrPt)1−x(SiO2)x perpendicular recording media

The distribution of easy axis orientation in perpendicular media is of technological importance because it affects the value of S^* (see Fig. 1), which quantifies the switching field distribution (SFD) and hence partially determines the data density achievable on a given medium. The distribution is controlled by the crystallographic orientation of grains and factors such as intergranular exchange and dipolar coupling. Due to strong demagnetising fields in the perpendicular orientation, traditional measurements of remanence as a function of angle are difficult to interpret and have required the use of large-scale computational models. In this work we have utilised the variation of coercivity H_C with angle, which has the advantage that at H_C the global demagnetising field is zero. Additionally, since such materials follow essentially the Stoner–Wohlfarth mode of reversal, the variation of H_C with angle, H_C(θ), is much greater than that for the remanence. We find that for (CoCrPt)_1−x(SiO₂)_x, where the level of exchange coupling is controlled, the distribution of magnetic easy axes is narrower when the exchange coupling is reduced, but dipolar coupling between the grains is strong and affects the magnetisation reversal significantly.     

Magnetic properties of nanocrystalline Co1−xZnxFe2O4 prepared by forced hydrolysis method

Nanocrystalline zinc-substituted cobalt ferrite powders, Co_1−xZn_xFe₂O₄ (x=0, 0.2, 0.4), were for the first time prepared by forced hydrolysis method. Magnetic and structural properties in these specimens were investigated. The average crystallite size is about 3.0 nm. When the zinc substitution increases from x=0 to x=0.4, at 4.2 K, the saturation magnetization increases from 72.1 to 99.7 emu/g and the coercive field decreases from 1.22 to 0.71 T. All samples are superparamagnetic at room temperature and ferrimagnetic at temperatures below the blocking temperature. The high value of the saturation magnetization and the very thin thickness of the disorder surface layer of all samples suggests that this forced hydrolysis method is suitable not only for preparing two metal element systems but also for three or more ones.     

Effect of Ni interlayer on stress level of CoSi2 films in Co/Ni/Si(1 0 0) bi-layered system

The effect of Ni interlayer on stress level of cobalt silicides was investigated. The X-ray diffraction patterns (XRD) show that low temperature formation of Co_1−xNi_xSi₂ solid solution was obtained while Ni interlayer was present in Co/Si system, which was confirmed by Auger electron spectrum (AES) and sheet resistance measurement. XRD was also used to measure the internal stress in CoSi₂ films by a 2θ_ψ − sin²ψ method. The result shows that the tensile stress in CoSi₂ films evidently decreased in Co/Ni/Si(1 0 0) system. The reduction of lattice mismatch, due to the presence of Ni in Co_xNi_1−xSi₂ solid solution, is proposed to explain this phenomenon.