Morphology control of MSU-1 silica particles

Mesoporous silica, MSU-1 with spherical morphology was prepared using TEOS (tetraethylorthosilicate) as a silica source in the presence of an alkyl polyethylene oxide surfactant via the novel two-step process proposed by Prouzet’s group: hydrolysis of TEOS conducted in highly acidic condition at room temperature followed by condensation promoted by fluoride salt addition at 35 °C. The particles produced were characterized by XRD, SEM, and N₂ adsorption/desorption isotherm. Static condensation period was found to be essential to have spherical morphology. Growth of spherical particles and evolution of porosity were studied as a function of time, temperature, NaF/TEOS, and TEOS/surfactant ratio. The MSU-1 particles prepared under different synthesis conditions were briefly tested for chromatographic separation of selected organic molecules, which demonstrates the governing influence of the pore size in MSU-1 on retention time.     

Preparation of bioactive glass ceramic nanoparticles by combination of sol-gel and coprecipitation method

SiO₂-CaO-P₂O₅ ternary bioactive glass ceramic nanoparticles were prepared via the combination of sol-gel and coprecipitation processes. Precursors of silicon and calcium were hydrolyzed in acidic solution and gelated in alkaline condition together with ammonium dibasic phosphate. Gel particles were separated by centrifugation, followed by freeze drying, and calcination procedure to obtain the bioactive glass ceramic nanoparticles. The investigation of the influence of synthesis temperature on the nanopartilce’s properties showed that the reaction temperature played an important role in the crystallinity of nanoparticle. The glass ceramic particles synthesized at 55 °C included about 15% crystalline phase, while at 25 °C and 40 °C the entire amorphous nanopowder could be obtained. In vitro testing showed that the bioactive glass ceramic nanoparticles can induce the formation of hydroxylaptite from simulated body fluid rapidly. As a result, this bioactive glass ceramic nanoparticle with excellent bioactivity would be a promising filler material for bone tissues engineering.     

Morphological control and in vitro bioactivity of nanoscale bioactive glasses

In this study, nanoscale bioactive glasses with different morphologies were prepared through sol-gel process using lactic acid as hydrolysis promoter. The effect of lactic acid concentration on the morphology of bioactive glass was characterized. The influence of the morphology on the in vitro bioactivity of samples was investigated in simulated body fluid and examined by various methods. The results showed that nanoscale surface morphologies with high roughness, created by addition of lactic acid, greatly enhanced the in vitro bioactivity of as-prepared samples. It was found that the morphology with nanoscale surface feature and pore size distribution, in addition to specific surface area and pore volume, plays an important role in accelerating the formation of carbonated hydroxyapatite. According to our results, bioactive glasses possessing surface morphology with significant numbers of nanoscale bioactive glass particles and a narrow unimodal or bimodal mesopore structure, exhibit the best in vitro bioactivity.     

A greener synthetic route to monodisperse CdSe quantum dots with zinc-blende structure

A much cheaper and greener route to monodisperse CdSe quantum dots (QDs) with zinc-blende structure has been developed. The N,N-dimethyl-oleoyl amide was chosen as the solvent, eliminating the needs of air-sensitive and toxic trioctylphosphine (TOP) or tributylphosphine (TBP), and cadmium oxide and elemental selenium as sources. The as-prepared CdSe QDs show an apparent blue-shift in the ultraviolet and visible (UV–vis) absorption peaks. The emission peak of the QDs can be tuned by changing synthesis time only.     

Zn掺杂Z形GaN纳米线的制备及表征

本文以氧化镓、氧化锌和氨气为原料,通过常压化学气相沉积法(APCVD)在Au/Si(100)衬底上成功生长出了Zn掺杂的"Z"形GaN纳米线。利用场发射扫描电镜(FESEM)、X-射线衍射仪(XRD)、透射电子显微镜(TEM)、光致发光谱(PL)等测试方法对样品的形貌、晶体结构及光学性质进行了表征。结果表明:在温度为950℃,氧化镓和氧化锌的质量比为8∶1的条件下,制备出的Zn掺杂Z形GaN单晶纳米线直径为70 nm、长度为数十个微米,生长机理遵循VLS机制。Zn元素的掺杂使GaN纳米线在420 nm处出现了光致发光峰,发光性能有所改善。     

Preparation and characterization of superfine ammonium perchlorate (AP) crystals through ceramic membrane anti-solvent crystallization

In this paper, a novel ceramic membrane anti-solvent crystallization (CMASC) method was proposed for the safe and rapid preparation ammonium perchlorate (AP) crystals, in which the acetone and ethyl acetate were chosen as solvent and anti-solvent, respectively. Comparing with the conventional liquid anti-solvent crystallization (LASC), CMASC which successfully introduces ceramic membrane with regular pore structure to the LASC as feeding medium, is favorable to control the rate of feeding rate and, therefore, to obtain size and morphology controllable AP. Several kinds of micro-sized AP particles with different morphology were obtained including polyhedral-like, quadrate-like to rod-like. The effect of processing parameters on the crystal size and shape of AP crystals such as volume ratio of anti-solvent to solvent, feeding pressure and crystallization temperature were investigated. It is found that higher volume ratio of anti-solvent to solvent, higher feeding pressure and higher temperature result in smaller particle size. Scaning electron microscopy (SEM) and X-ray diffraction (XRD) were used to characterize the resulting AP crystals. The nucleation and growth kinetic of the resulting AP crystals were also discussed.     

The influence of the growth rate and V/III ratio on the crystal quality of InGaAs/GaAs QW structures grown by MBE and MOCVD methods

The influence of the growth rate and V/III ratio on the crystal quality of In_0.2GaAs/GaAs quantum well structures was examined. The investigated heterostructures were grown by molecular beam epitaxy (MBE) and metalorganic chemical vapour deposition (MOCVD). Reflection high energy electron diffraction (RHEED), photoluminescence measurements (PL), high-resolution X-ray diffraction (HRXRD) and atomic force microscopy (AFM) were applied for evaluation of the interfaces smoothness and the overall layer quality. Comprehensive characterisation of InGaAs/GaAs structures allowed us to establish optimal values of analysed technological parameters. Moreover, the comparison between the results obtained for samples grown by two different epitaxial techniques allowed us to find, which of the analysed growth parameters has the strongest influence on the quality of MBE and MOCVD grown structures. In contrast with the growth temperature and the interruption time, which in different manner impact on the crystal quality of QWs obtained by different method, the growth rate and the V/III ratio play similar role in both epitaxial techniques.     

Gain cross-section of 1.06 μm emission in Nd-doped SiO2-LaF3 glass-ceramics prepared by sol-gel method

The room temperature near-infrared emission at 1.06 μm corresponding to the ⁴F_3/2 → ⁴I_11/2 laser transition in Nd³⁺-doped SiO₂-LaF₃ transparent glass-ceramics prepared by sol-gel method has been characterized in terms of the product of emission cross-section and fluorescence lifetime. Stimulated emission cross-sections have been calculated from experimental emission spectra using the Füchtbauer-Ladenburg equation. The precipitation of LaF₃ nanocrystals after heat-treatment, confirmed by X-ray diffraction, induces a significant increment of the 1.06 μm near-infrared emission compared with the as made sample. An enhancement of emission cross-section of about 10% has been achieved with increasing temperature of heat-treatment of the nano-ceramming process from 800 to 1000 °C, which is related to the growth of LaF₃ nanocrystals.     

Low temperature deposition of zinc oxide nanoparticles via zinc-rich vapor phase transport and condensation

ZnO nanoparticles as small as 80 nm were successfully synthesized using a modified vapor phase transport (VPT) process at substrate temperatures as low as 222 °C. Particle size distribution and morphology were characterized by scanning electron microscopy and atomic force microscopy. Energy dispersive X-ray spectroscopy and X-ray diffraction indicate the synthesis of high quality crystalline ZnO structures. Low temperature (4.2 K) photoluminescence (PL) spectroscopy was used to characterize the optical quality of the nanoparticles. Ultraviolet emission and a nanostructure specific feature at 3.366 eV are strong in the PL spectra. The 3.366 eV feature is observed to predominate the spectrum with decrease in particle size. This size effect corroborates the luminescence as a nanostructure-specific surface related exciton feature as previously speculated in the literature. In addition, self-assembled ZnO mesoparticles (>100 nm) were realized by increasing the growth time. Low growth temperatures of the particles allow for their potential utilization in flexible organic hybrid optoelectronics. However, this work focuses mainly on the modified synthesis and optical characterization of nanoparticles.     

Ultralow density silica aerogels prepared with PEDS

This paper deals with the synthesis of ultralow density silica aerogels using polyethoxydisiloxanes (PEDS) as the precursor via sol-gel process followed by supercritical drying using ethanol solvent extraction. Ultralow density silica aerogels with 5 mg/cc of density were made for the molar ratio by this method. A remarkable reduction in the gelation time was observed by the effect of the catalyst NH₄OH at room temperature. The microstructure and morphology of the ultralow density silica aerogels were characterized by the specific surface area, S_BET, SEM, TEM and the pore size distribution techniques. The results show that the diameter of the silica particles is about 13 nm and the pore size of the silica aerogels is about several nm. The specific surface area of the silica aerogel is 339 m²/g and the specific surface area, pore volume and average pore diameter decrease with increasing density of the silica aerogel.     

Synthesis and growth mechanism of ZnO rod‐like nanostructures by a microwave‐assisted low‐temperature aqueous solution route

A zinc oxide (ZnO) nanoarray (rod‐like nanostructure) was successfully synthesized through a low‐temperature aqueous solution and microwave‐assisted synthesis using zinc nitrate hexahydrate (Zn(NO₃)₂·6H₂O) and hexamethylenetetramine (HMTA) as raw materials, and using FTO glass as substrate. The effects of parameters in the preparation process, such as solution concentration, reaction temperature and microwave power, on the morphology and microstructure of ZnO nanoarray were studied. Phase structure and morphology of the products were characterized by X‐ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The results indicated that hexagonal wurtzite structure ZnO nanoarray with good crystallization could be prepared through a low‐temperature solution method. When the concentration of the mixed solution was 0.05 M, the reaction temperature was 95 °C, and the reaction time was 4 h, high‐density ZnO regular nanorods of 200 nm diameter were obtained. A possible mechanism with different synthesis methods and the influence of microwave processing are also proposed in this paper.     

Semi-wet growth and characterization of multi-functional nano-engineered mixed metal oxides for industrial application

This review paper covers the low temperature wet growth of nano-engineered particles of ZnO-based mixed metal oxides, their growth mechanism, and characterization using X-ray diffraction, SEM, TEM and IR, UV–visible, and XPS spectral techniques. Main focus of this article is centered on low temperature semi-wet methods of synthesis that are suitable for large scale production of zinc oxide-based systems mixed with iron oxide, copper oxide, nickel oxide and cobalt oxide. These mixed metal oxides have broad industrial applications as catalyst, semiconductors, adsorbents, superconductors, electro-ceramics, and antifungal agents in addition to extensive applications in medicines. This paper discusses the low-cost and environment friendly synthesis of these mixed metal oxides, measurement of properties and applicability of these materials systems.     

Grain size dependence of physico-optical properties of nanometallic silver in silica aerogel matrix

Synthesis of silver nanoparticles in silica aerogel matrix by sub-critical drying technique is reported in the present article. Physical characterization of silver/silica aerogel nanocomposites with 1, 5 and 25 wt% of silver has been discussed. Physico-optical properties of the composites have been evaluated as a function of the silver particle size crystallized within the silica matrix. The maximum size of the silver grains that could be accommodated in the amorphous matrix was observed to be 25 nm. Silver particles of diameter larger than 25 nm were found segregated out of the silica matrix; such silver particles were single crystalline with dendritic morphology. Optical absorption analysis confirmed the presence of both the oligomeric and nanometallic silver in the samples heat-treated up to 500 °C. With decreasing silver particle size, the surface plasmon resonance was found first to shift towards blue followed then by a red shift. The blue shift is attributed to the chemisorption occurring between the metallic core and the silica matrix. With larger grain size of 25-80 nm in 25 wt% Ag-silica aerogel sample, the diffuseness of electron cloud outside the potential well was observed to cause a red shift in the surface plasmon resonance.     

Effects of morphologies on the field emission characteristics of GaN nanorods grown on Si (0 0 1) by MBE

GaN nanorods were grown on Si (0 0 1) substrates with a native oxide layer by molecular beam epitaxy. The changes in the morphologies and their effects on the field emission characteristics of GaN nanorods were investigated by varying growth conditions, namely, growth time of low-temperature GaN buffer layer, growth time of GaN nanorods, Ga flux during growth of GaN nanorods, and growth temperature of GaN nanorods. GaN nanorods with a low aspect ratio measured by diode configuration showed better field emission characteristics than those with a high aspect ratio, which may be due to the effects of screening and the surface depletion layer. In addition, the distance between the GaN nanorods and the anode played an important role in the field emission characteristics such as turn-on field, field enhancement factor, and field distribution on the emitter surface.     

The photoluminescence of ZnO thin films grown on Si (1 0 0) substrate by plasma-enhanced chemical vapor deposition

High-quality ZnO thin films have been grown on a Si(1 0 0) substrate by plasma-enhanced chemical vapor deposition (PECVD) using a zinc organic source (Zn(C₂H₅)₂) and carbon dioxide (CO₂) gas mixtures at a temperature of 180°C. A strong free exciton emission with a weak defect-band emission in the visible region is observed. The characteristics of photoluminescence (PL) of ZnO, as well as the exciton absorption peak in the absorption spectra, are closely related to the gas flow rate ratio of Zn(C₂H₅)₂ to CO₂. Full-widths at half-maximum of the free exciton emission as narrow as 93.4 meV have been achieved. Based on the temperature dependence of the PL spectra from 83 to 383 K, the exciton binding energy and the transition energy of free excitons at 0 K were estimated to be 59.4 meV and 3.36 eV, respectively.     

GO/Tb4 O7复合材料的光催化性能研究

以氧化石墨烯(GO)和氧化铽(Tb4 O7)为原材料,采用水热法制备了GO/Tb4 O7复合粉体.通过SEM、XRD和分光光度计等手段对复合材料粉体进行了分析.用罗丹明B溶液作为模拟污染物,在光催化反应仪中采用紫外光照射不同时间后,利用分光光度计测试其光催化性能.实验结果表明:复合材料粉体中,氧化铽颗粒基本可以均匀的分布在GO表面;随着GO含量(6;,8;,10;)的增加,复合材料粉体和罗丹明B的反应速率逐渐加快;在60 min时三种复合材料粉体的降解率分别为98.40;、98.64;、98.94;.     

Synthesis,structure and optical properties of zinc oxide hexagonal microprisms

Zinc oxide (ZnO) pencil‐head‐like (PHL) microprisms were synthesized by a hydrothermal route using a zinc (Zn) plate as a source and substrate. The structural analysis confirmed the formation of ZnO with hexagonal wurtzite phase on the hexagonal Zn substrate and the growth of the ZnO microparticles along the [101] direction. The room temperature photoluminescence (PL) of the ZnO microprisms showed a sharp UV emission band located at around 380 nm, which is expected to originate from the radiative recombination of free excitons. The sharp UV emission band, with a full width at half‐maximum of about 15 nm and an extremely weak visible emission, confirms the high crystal quality of the synthesized ZnO microprisms. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

High intense UV-luminescence of nanocrystalline ZnO thin films prepared by thermal oxidation of ZnS thin films

High quality zinc oxide (ZnO) films were obtained by thermal oxidation of high quality ZnS films. The ZnS films were deposited on a Si substrate by a low-pressure metalorganic chemical vapor deposition technique. X-ray diffraction spectra indicate that high quality ZnO films possessing a polycrystalline hexagonal wurtzite structure with preferred orientation of (0 0 2) were obtained. A fourth order LO Raman scattering was observed in the films. In photoluminescence (PL) measurements, a strong PL with a full-width at half-maximum of 10 nm around 380 nm was obtained for the samples annealed at 900°C at room temperature. The maximum PL intensity ratio of the UV emission to the deep-level emission is 28 at room temperature, providing evidence of the high quality of the nanocrystalline ZnO films.     

Photoluminescent hierarchical Zno micro‐flower and its surface wettability

The flower‐like ZnO with micro‐nano hierarchical structure is successfully obtained by a simple hydrothermal synthesis, using sodium dodecyl benzene sulfonate (SDBS) as a structure direct agent. The resulted ZnO micro‐flowers are very uniform in morphology with particle sizes around 1 µm. A number of techniques, including X‐ray diffraction (XRD), field emission scan electron microscopy (FESEM), energy‐dispersive spectroscopy (EDS), fourier transform infrared (FTIR) spectra and thermogravimetry analysis (TGA), are used to characterize the obtained ZnO. The self‐assemble of ZnO nano‐sheets under the direction of SDBS leads to the formation of ZnO micro‐flowers. The room temperature photoluminescence property of the obtained flower‐like ZnO exhibits a broad visible light emission. The surface of as‐made ZnO shows a very hydrophilic property, while the special micro‐nano hierarchical structure enables the ZnO micro‐flower a superhydrophobic surface after modification of fluoroalkylsilane.     

Luminescence characteristics of Yb, La codoped yttrium oxide nanopowders

Luminescence characteristics of Yb³⁺, La³⁺ codoped yttrium oxide nanopowders were investigated. The grain size and the crystallinity of (Yb_0.05Y_0.90La_0.05)₂O₃ nanopowders increase with the increase of calcination temperature. The average grain size of the nanopowders calcined at 1100 °C is 66 nm and its cooperative up-conversion luminescence centered at 498 nm was detected due to nanometer size effect and perfect crystallinity. However, the cooperative up-conversion luminescence of (Yb_0.05Y_0.90La_0.05)₂O₃ transparent ceramics was not detected.