In-situ visualization of a super-accelerated synthesis of zinc oxide nanostructures through CO2 laser heating

A simple growth technique capable of growing a variety of zinc oxide (ZnO) nanostructures with record growth rates of 25 μm/s is demonstrated. Visible lengths of ZnO nanowires, nanotubes, comb-like and pencil-like nanostructures could be grown by employing a focused CO₂ laser-assisted heating of a sintered ZnO rod in ambient air, in few seconds. For the first time, the growth process of nanowires was videographed, in-situ, on an optical microscope. It showed that ZnO was evaporated and presumably decomposed into Zn and oxygen by laser heating, reforming ZnO nanostructures at places with suitable growth temperatures. Analysis on the representative nanowires shows a rectangular cross-section, with a [0 0 0 1] growth direction. With CO₂ laser heating replacing furnace heating used conventionally, and using different reactants and forming gases, this method could be easily adopted for other semiconducting inorganic nanostructures in addition to ZnO.     

Effect of oxygen partial pressure on the growth of zinc micro and nanostructures

Zinc micro and nanostructures were synthesized in vacuum by condensing evaporated zinc on Si substrate at different gas pressures. The morphology of the grown Zn structures was found to be dependent on the oxygen partial pressure. Depending on oxygen partial pressure it varied from two-dimensional microdisks to one-dimensional nanowire. The morphology and structural properties of the grown micro and nanostructures were studied by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Transmission electron microscopy (TEM) studies on the grown Zn nanowires have shown that they exhibit core/shell-like structures, where a thin ZnO layer forms the shell. A possible growth mechanism behind the formation of different micro and nanostructures has been proposed. In addition, we have synthesized ZnO nanocanal-like structures by annealing Zn nanowires in vacuum at 350 °C for 30 min.     

Influence of ambient gases on the morphology and photoluminescence of ZnO nanostructures synthesized with nickel oxide catalyst

The morphology and luminescence properties of ZnO nanowires synthesized using NiO catalyst in a chemical vapor deposition system under different growth ambient have been studied. ZnO nanostructures were prepared in nitrogen, ammonia and hydrogen ambient and characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy and photoluminescence. Growth in nitrogen ambient yields ZnO nanoneedles while growth with ammonia and hydrogen ambient ends up with ZnO nanowires. Presence of the Ni tip at the end in either morphology indicated the involvement of vapor–liquid–solid growth mechanism. Enhanced green emission in ZnO nanowires implies the presence of a high density of oxygen vacancies. Influence of the ambient gases on the morphology and optical properties of ZnO nanostructures is discussed.     

Synthesis and photoluminescence properties of ZnO nanowire arrays

In this paper we report a chemical method named coordination reaction method to synthesize ZnO nanowire arreys. ZnO nanowires with the diameter about 80nm were successfully fabricated in the channels of the porous anodic alumina (PAA) template by the above coordination reaction method. The microstructures of ZnO/PAA assembly were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X‐ray diffraction (XRD). The results showed that the ZnO nanowires can be uniformly assembled into the nanochannels of PAA template. The growth mechanism of ZnO nanowires and the conditions of the coordination reaction are discussed. Photoluminescence (PL) measurement shows that the ZnO/PAA assembly system has a blue emission band caused by the various defects of ZnO. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optical properties of ZnO nanotubes

Tubular ZnO nanostructures have been obtained via a hydrothermal method at low temperature (90 °C) without any catalysts or templates. The XRD measurement reveals that the tubes are single crystals with hexagonal wurtzite structure. SEM shows that the diameters of ZnO nanotubes ranged from 400 to 550 nm. The Raman and PL spectra indicate that oxygen vacancies or Zn interstitials are responsible for the green emission in the ZnO nanotubes. A possible growth mechanism on the formation of crystalline ZnO nanotubes has been presented. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Fabrication of UV detectors based on ZnO nanowires using silicon microchannel

Aligned ZnO nanowires were grown by metal organic chemical vapor deposition on patterned silicon substrate. The shape of nanostructures was greatly influenced by the micropatterned surface. The aspect ratio, packing fraction and the number density of nanowires on top surface are around 10, 0.8 and 10⁷ per mm², respectively, whereas the values are 20, 0.3 and 5×10⁷ per mm², respectively, towards the bottom of the cavity. XRD patterns suggest that the nanostructures have good crystallinity. High-resolution transmission electron microscopy confirmed the single-crystalline growth of the ZnO nanowires along the [0 0 0 1] direction. Photosensitivity of the nanowires, grown on both top and bottom surface of the microchannel, was observed. However, the nanowires grown on bottom surface have shown better UV response with base line recovery at dark condition.     

Morphology and photoluminescence properties of ZnO nanostructures fabricated with different given time of Ar

ZnO nanostructures were grown on Au‐coated Si (100) substrates by carbonthermal reduction method with the help of Ar at the beginning of growth. The structural and optical properties of ZnO nanostructures strongly depended on the supply time of Ar. When the given time of Ar gas current was 90s, sample was ZnO nanowires with hexagonal morphology. The Raman spectroscopy revealed the low level of oxygen vacancies and Zn interstitials in samples. Room temperature photoluminescence (PL) spectra exhibited the intensity of green emission increased on the condition of rich oxygen (decrease given time of Ar) and the nanowire had strongest intensity of UV emission compared with other nanostructures. Green emission is ascribed to the electron transition from the bottom of the conduction band to the antisite defect O_Zn level. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Fabrication of Zn/ZnO nanocables through thermal oxidation of Zn nanowires grown by RF magnetron sputtering

Fabrication of Zn/ZnO nanocables by thermal oxidation of Zn nanowires grown by RF magnetron sputtering is reported. Single crystalline Zn nanowires could be grown by controlling supersaturation of source material through the adjustment of temperature and Zn RF power. X-ray diffraction and high-resolution transmission electron microscopy showed that surfaces of these Zn nanowires, grown along the [0 1 0] direction, gradually oxidized inward the Zn core to form coaxial Zn/ZnO nanocables in the subsequent oxidation at 200 °C. In the Zn/ZnO nanocable, epitaxial relations of [1 0 0]_Zn//[1 0 0]_ZnO, and (0 0 1)_Zn//(0 0 1)_ZnO existed at the interface between the Zn core and ZnO shell. A number of dislocations were also observed in the interface region of the Zn/ZnO nanocable, which are attributed to large differences in the lattice constants of Zn and ZnO. With further increasing the oxidation temperature over 400 °C, Zn nanowires were completely oxidized to form polycrystalline ZnO nanowires. The results in this study suggest that coaxial Zn/ZnO nanocable can be fabricated through controlled thermal oxidation of Zn nanowires, yielding various cross-sectional areal fractions of Zn core and ZnO shell.     

Structure evolution of Zn cluster on Si (0 0 1) substrate for ZnO nanostructure growth

In this paper, Monte Carlo simulations are carried out for Zn cluster supported on a static Si (0 0 1) substrate to estimate the morphological evolution of self-catalysis growth of ZnO nanostructures. The tight-binding many-body potential and the Lennard–Jones potential are used to describe Zn–Zn and Zn–Si interactions, respectively. The dynamic processes of Zn cluster in the temperature field decomposing and wetting effects are visualized through the simulation. The Zn atomic aggregates that randomly disperse on the Si (0 0 1) substrate with different shapes, such as a dimer, trimer, multimer and atomic chain, would act as catalytic nucleation sites for the following growth of the ZnO nanostructure. This phenomenon provides a sound explanation for the formation of randomly orientated and diversified ZnO nanostructures on the Si (0 0 1) substrate.     

Precursor-controlled synthesis of hierarchical ZnO nanostructures,using oligoaniline-coated Au nanoparticle seeds

Shape-selected synthesis of a large number of zinc oxide (ZnO) nano- and microstructures was achieved by the seed-mediated growth of oligoaniline-coated gold nanoparticle precursors. Distinctive ZnO structures such as nanoplates, nanospheres, microstars, microflowers, microthorns and micromultipods were synthesized by this method. Slightly different shapes were obtained in the absence of the seed solution. This is a fast, low temperature (60 °C) and biomimetic route to make a wide variety of structures. The structure and morphology of the nanostructures were studied by transmission electron microscopy (TEM) and scanning electron microscopy (SEM), respectively. Raman spectroscopy, Fourier-transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) were utilized for the characterization of the nanostructures. A growth mechanism for these nanostructures was proposed based on these results. The concentrations of the reacting species were the main parameter causing the changes in the morphologies. The variation in morphologies of these structures is believed to be due to the ability of the seed solution as well as polyvinylpyrrolidone (PVP) to selectively suppress/depress the growth of certain planes, allowing growth to occur only in certain specific directions. Changes in the amount of growth nuclei with varying sodium hydroxide (NaOH) concentration is also seen to affect the morphology of these structures.     

Shape-controlled synthesis of ZnO nano- and micro-structures

A simple efficient thermal evaporation technique, oxidizing zinc foils and in situ evaporating at 700 °C in air without the presence of catalyst and carrier gas, was developed to control the growth of the different morphologies of ZnO nano- and micro-structures. Porous membrane, nanowires (or nanorods), nanobelts, nanoneedles, and tetrapods have been achieved through tuning the heating rates in a tube furnace. The morphologies and microstructures of samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. Our deterministic growth of different shapes of ZnO crystals offers ideal model system to study the physical properties.     

Structural and photoluminescence properties of GaN/ZnO core‐shell nanowires with their shells sputtered

We have reported the preparation of ZnO‐coated GaN nanowires and investigated changes in the structural and photoluminescence (PL) properties by the application of a thermal annealing process. For fabricating the core‐shell nanowires, Zn target was used to sputter ZnO shell onto GaN core nanowires. X‐ray diffraction (XRD) analysis indicated that the annealed core‐shell nanowires clearly exhibited the ZnO as well as GaN phase. The transmissoin electron microscopy (TEM) investigation suggested that annealing has induced the crystallization of ZnO shell layer. We have carried out Gaussian deconvolution analysis for the measured PL spectra, revealing that the core GaN nanowires exhibited broad emission which consist of red, yellow, blue, and ultraviolet peaks. ZnO‐sputtering induced new peaks in the green region. Thermal annealing reduced the relative intensity of the green emission. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis,characterization and electrical properties of hybrid Zn2GeO4–ZnO beaded nanowire arrays

We report the syntheses of vertically aligned, beaded zinc germinate (Zn₂GeO₄)/zinc oxide (ZnO) hybrid nanowire arrays via a catalyst-free approach. Vertically aligned ZnO nanowire is used as a lattice matching reactive template for the growth of Zn₂GeO₄/ZnO nanowire. The morphology and structure of the as-prepared samples were characterized using X-ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS). TEM studies revealed the beaded microstructures of the Zn₂GeO₄/ZnO nanowire. The thickness and microstructures of crystalline beads could be easily controlled by tuning the growth duration and temperature. The photoluminescence spectrum of the Zn₂GeO₄/ZnO nanowires is composed of two peaks, i.e., the ultraviolet (UV) peak and the defect peak. For longer treatment duration of the samples, both the UV and defect peak intensities decrease dramatically. One application of the as-prepared Zn₂GeO₄/ZnO nanowire is to use the nanowire as template for the growth of three-dimensionally (3D) aligned, high-density ZnO nanobranches en route to hierarchical structure. The study of field emission properties of the as-prepared samples revealed the low turn-on voltage and high current density electron emission from the 3D ZnO nanobranches as compared to the ZnO nanowires and Zn₂GeO₄/ZnO nanowires. Furthermore, the electrical transport behavior of single hybrid nanowire device indicates the formation of back-to-back Schottky barriers (SBs) formation at the contacts and its application in white-light response has been demonstrated.     

Conversion from ZnO nanospindles into ZnO/ZnS core/shell composites and ZnS microspindles

The formation process of ZnO/ZnS core/shell microcomposites and ZnS microspindles prepared by the reaction of ZnO colloids and thioacetamide under hydrothermal conditions was investigated in detail by X‐ray powder diffraction, field emission scanning electron microscopy, transmission electron microscopy and selected‐area electron diffraction techniques. The precursors of spindlelike ZnO colloids were prepared by a hydrothermal method with the help of a surfactant. A growth mechanism was proposed to account for the formation of ZnO/ZnS core/shell microcomposites and ZnS microspindles. Luminescence measurement revealed that ZnO/ZnS core/shell microcomposites integrated the luminescence effect of ZnO and ZnS. The blue and green emissions were dramatically enhanced, while the orange emission disappeared. The results provide a good approach to tune the visible emission of the ZnO nanostructures by ZnS coating. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Low temperature synthesis of spindle‐like ZnO nanostructures under microwave irradiation

A simple and general microwave route is developed to synthesize nanostructured ZnO using Zn(acac)₂·H₂O (acac = acetylacetonate) as a single source precursor. The reaction time has a great influence on the morphology of the ZnO nanostructures and an interesting spindle‐like nanostructure is obtained. The microstructure and morphology of the synthesized materials are investigated by X‐ray diffraction (XRD), scanning electron microscopy (SEM), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED). It is found that all of them with hexagonal wurtzite phase are of single crystalline structure in nature. Ultraviolet–visible (UV‐vis) absorption spectra of these ZnO nanostructures are investigated and a possible formation mechanism for the spindle‐like ZnO nanostructures is also proposed.     

Hydrothermal synthesis of hollow twinning ZnO microstructures

Two kinds of hollow twinning ZnO microstructures were synthesized through a simple hydrothermal method without additional templates or any surfactants. Dumbbell‐like and shuttle‐like ZnO microstructures with hollows were obtained by changing the materials source. The products were characterized by X‐ray power diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high‐resolution transmission electron microscopy (HRTEM). It was found that different precursors may be responsible for the formation of two different morphologies. Based on the time‐dependent experiments, we investigated the growth process of these hollow twinning structures and found the “Ostwald‐ripening process” played an important role. The interesting point of this growth process was that the interface of the two twinning structure performed as the activate center where the Ostwald‐ripening process carried out. We also investigated the luminescent properties of the as‐obtained products by photoluminescence (PL) spectroscopy. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The synthesis of aligned silicon nanowires under ambient atmospheric pressure

Highly ordered amorphous silicon nanowires were successfully synthesized from single crystalline silicon wafer at the pyrolysis temperature of 1050 °C under ambient atmospheric pressure. Both poly (phenylcarbyne) and nickel nitrate played important roles in the growth of silicon nanowires. The fabrication of ordered silicon nanowires was controllable and repeatable, confirmed by the experimental results. The morphology and microstructure analysis of the as-obtained samples showed the highly ordered amorphous silicon nanowires were obtained, determined by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and FT-infrared spectroscopy. A solid-liquid-solid growing process was proposed.     

Observation of the growth of carbon nanotubes prepared at low temperature

Lack of information during the growth of carbon nanotubes has hindered efforts to understand the growth mechanism of these unique nanoscale structures. Here, we report that Multi‐walled carbon nanotubes with bamboo‐shaped structure may be synthesized by solvothermal method at 300°C using benzene as carbon source and Zn as catalyst. We have obtained direct experimental information on the growth under Transmission electron microscopy. It has been shown that all the compartments of bamboo‐like tube successively joined leading to the formation of regularly segmented nanobamboos. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Suppression of phase separation in InGaN layers grown on lattice-matched ZnO substrates

Sapphire and SiC are typical substrates used for GaN growth. However, they are non-native substrates and result in highly defective materials. The use of ZnO substrates can result in perfect lattice-matched conditions for 22% indium InGaN layers, which have been found to suppress phase separation compared to the same growths on sapphire. InGaN layers were grown on standard (0 0 0 2) GaN template/sapphire and (0 0 0 1) ZnO substrates by metalorganic chemical vapor deposition. These two substrates exhibited two distinct states of strain relaxation, which have direct effects on phase separation. InGaN with 32% indium exhibited phase separation when grown on sapphire. Sapphire samples were compared with corresponding growths on ZnO, which showed no evidence of phase separation with indium content as high as 43%. Additional studies in Si-doping of InGaN films also strongly induced phase separation in the films on sapphire compared with those on ZnO. High-resolution transmission electron microscopy results showed perfectly matched crystals at the GaN buffer/ZnO interface. This implied that InGaN with high indium content may stay completely strained on a thin GaN buffer. This method of lattice matching InGaN on ZnO offers a new approach to grow efficient emitters.     

Optical and magnetic properties of (Zn,Mn)O nanostructures synthesized by CVD method

We report on microstructural, optical and magnetic properties of (Zn,Mn)O nanostructures synthesized by a chemical vapor deposition (CVD) technique. Average diameters of the as grown (Zn,Mn)O nanorods and nanowires were ∼400 nm and ∼50 nm, respectively. X‐ray diffraction (XRD) and photoluminescence (PL) spectra provided the evidence that Mn was incorporated into ZnO lattice. PL spectra of the (Zn,Mn)O nanostructures showed shift in near band edge (NBE) emission at 396 nm together with a green band (GB) emission at 510 nm and a blue band (BB) emission at 460 nm. Magnetic measurements revealed mixed magnetic phases (ferromagnetic and antiferromagnetic) in the (Zn,Mn)O nanostructures. Vapor‐solid‐solid (VSS) mechanism was thought to be responsible for the growth of the nanostructures at low temperatures. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)