On the isothermal closed space sublimation growth of CdSe using a mixed source for selenium

The use of a selenium–tellurium (SeTe) mixed source in the isothermal close space sublimation growth of CdSe epilayers is considered. The epitaxial growth was performed in flowing helium by sequential exposures of the substrate to vapors of the mixed SeTe source and elemental cadmium at temperatures within 350–410 °C. In spite of the mixed source (proposed to decrease the partial pressure of Se), tellurium incorporation was small and CdSe_xTe_(1−x) (x∼0.98) epilayers were obtained. X-ray diffraction reciprocal space mapping shows the existence of hexagonal inclusions mainly on the (1 1 1) facets of the cubic phase. Material deposition on areas of the graphite crucible exposed to the sources, contamination of the Cd source and large growth rates suggest the existence of a selenium transport process via graphite. This transport might be the result of the combination of selenium deposition on graphite with a subsequent activated desorption of selenium under cadmium exposure. It affects Cd source purity and growth kinetic bringing on a modification of the usual atomic layer deposition regimen; however, a reproducible growth rate of the epilayers was obtained.     

The effect of annealing on the surface morphology of strained and unstrained InxAl1−xN thin films

In_xAl_1−xN is a particularly useful group-III nitride alloy because by adjusting its composition it can be lattice matched to GaN. Such lattice-matched layers may find application in distributed Bragg reflectors (DBRs) and high electron mobility transistors (HEMTs). However, compared with other semiconducting nitride alloys, In_xAl_1-xN has not been researched extensively. In this study, thin In_xAl_1−xN epilayers were grown by metal-organic vapour phase epitaxy (MOVPE) on GaN and Al_yGa_1−yN layers. Samples were subjected to annealing at their growth temperature of 790 °C for varying lengths of time, or alternatively to a temperature ramp to 1000 °C. Their subsequent surface morphologies were analysed by atomic force microscopy (AFM). For both unstrained In_xAl_1−xN epilayers grown on GaN and compressively strained epilayers grown on Al_yGa_1−yN, surface features and fissures were seen to develop as a consequence of thermal treatment, resulting in surface roughening. It is possible that these features are caused by the loss of In-rich material formed on spinodal decomposition. Additionally, trends seen in the strained In_xAl_1−xN layers may suggest that the presence of biaxial strain stabilises the alloy by suppressing the spinode and shifting it to higher indium compositions.     

Compensation effect of Mg-doped a- and c-plane GaN films grown by metalorganic vapor phase epitaxy

The electrical and optical properties of Mg-doped a- and c-plane GaN films grown by metalorganic vapor phase epitaxy were systematically investigated. The photoluminescence spectra of Mg-doped a- and c-plane GaN films exhibit strong emissions related to deep donors when Mg doping concentrations are above 1×10²⁰ cm⁻³ and 5×10¹⁹ cm⁻³, respectively. The electrical properties also indicate the existence of compensating donors because the hole concentration decreases at such high Mg doping concentrations. In addition, we estimated the N_D/N_A compensation ratio of a- and c-plane GaN by variable-temperature Hall effect measurement. The obtained results indicate that the compensation effect of the Mg-doped a-plane GaN films is lower than that of the Mg-doped c-plane GaN films.     

High-resolution imaging of 1:1 [0 0 0 1] ordered a-plane Al0.3Ga0.7N

We report the observation of ordering in Al_0.3Ga_0.7N as part of an epitaxial lateral overgrowth (ELO) of GaN carried out using (1 1 2¯ 2) GaN templates grown by metal-organic chemical vapor deposition on m-plane sapphire. Transmission electron microscopy showed that the crystalline quality of the ELO GaN was greatly improved when the ELO SiO₂ mask was patterned along the [1 1 2¯ 0]_sapphire direction. The ELO GaN wings had an inclined columnar shape with smooth (0 0 0 1) and (1 1 2¯ 0) facets. Layers of 1:1 [0 0 0 1] ordered a-plane Al_0.3Ga_0.7N were observed on the a-plane GaN facets by high-resolution transmission electron microscopy and high-angle annular-dark-field scanning transmission electron microscopy. However, no ordering was observed for c-plane Al_0.3Ga_0.7N layers grown at the same time on the c-plane GaN facets.     

MOCVD growth and optical properties of non-polar (1 1–2 0) a-plane GaN on (1 0–1 2) r-plane sapphire substrate

Non-polar a-plane GaN film with crystalline quality and anisotropy improvement is grown by use of high temperature AlN/AlGaN buffer, which is directly deposited on r-plane sapphire by pulse flows. Compared to the a-plane GaN grown on AlN buffer, X-ray rocking curve analysis reveals a remarkable reduction in the full width at half maximum, both on-axis and off-axis. Atomic force microscopy image exhibits a fully coalesced pit-free surface morphology with low root-mean-square roughness (∼1.5 nm). Photoluminescence is carried out on the a-plane GaN grown on r-plane sapphire. It is found that, at low temperature, the dominant emission at ∼3.42 eV is composed of two separate peaks with different characteristics, which provide explanations for the controversial attributions of this peak in previous studies.     

A route to single-crystalline ZnO films with low residual electron concentration

Single-crystalline ZnO films have been grown on a-plane sapphire in plasma assisted molecular beam epitaxy by introducing a high-temperature ZnO buffer layer. The residual electron concentration of the films can be lowered to 1.5×10¹⁶ cm⁻³, comparable with the best value ever reported for ZnO films grown on a rare and costly substrate of ScAlMgO₄. A 3×3 reconstruction has been observed on the films grown in this route, which reveals that the films have very smooth surface. X-ray phi-scan spectrum of the films shows six peaks with 60° intervals, and two-dimensional X-ray diffraction datum indicates the single-crystalline nature of the films. Low temperature photoluminescence spectrum of the films shows a dominant free exciton emission and five phonon replicas, confirming the high quality of the films.     

Growth of high quality a-plane GaN epi-layer on r-plane sapphire substrates with optimization of multi-buffer layer

Nonpolar (1 1–2 0) a-plane GaN films have been grown using the multi-buffer layer technique on (1–1 0 2) r-plane sapphire substrates. In order to obtain epitaxial a-plane GaN films, optimized growth condition of the multi-buffer layer was investigated using atomic force microscopy, high resolution X-ray diffraction, and transmission electron microscopy measurements. The experimental results showed that the growth conditions of nucleation layer and three-dimensional growth layer significantly affect the crystal quality of subsequently grown a-plane GaN films. At the optimized growth conditions, omega full-width at half maximum values of (11–20) X-ray rocking curve along c- and m-axes were 430 and 530 arcsec, respectively. From the results of transmission electron microscopy, it was suggested that the high crystal quality of the a-plane GaN film can be obtained from dislocation bending and annihilation by controlling of the island growth mode.     

Morphological,structural and electrical investigations on non-polar a-plane ZnO epilayers

We report on the growth of non-polar a-plane ZnO by CVD on r-plane-sapphire-wafers, a-plane GaN-templates and a-plane ZnO single-crystal substrates. Only the homoepitaxial growth approach leads to a Frank–van-der–Merwe growth mode, as shown by atomic force microscopy. The X-ray-diffraction spectra of the homoepitaxial thin films mirror the excellent crystalline quality of the ZnO substrate. The morphological and the structural quality of the homoepitaxial films is comparable to the best results for the growth on c-plane ZnO-substrates. The impurity incorporation, especially of group III elements, seems to be reduced when growing on the non-polar a-plane surface compared to the c-plane films as demonstrated by secondary ion mass spectrometry (SIMS). Optical properties have been investigated using low temperature photoluminescence measurements. We employed capacitance–voltage measurements (C–V) to measure the background carrier density and its profile from substrate/film interface throughout the film to the surface. In thermal admittance spectroscopy (TAS) specific traps could be distinguished, and their thermal activation energies and capture cross sections could be determined.     

Morphology and crystal phase evolution of doctor-blade coated CuInSe2 thin films

CuInSe₂ (CIS) chalcopyrite thin films were prepared using a low-cost, non-vacuum doctor-blade coating and the thermal annealing method. An acetone-based precursor solution containing copper chloride, indium chloride, selenium chloride, and an organic binder was deposited onto a Mo-sputtered soda lime glass substrate using a doctor-blade coating method. After coating, the precursor films were annealed in a quartz tube furnace under low vacuum without the use of a Se atmosphere or reduction conditions. Evolution of the morphology, crystal structure, and thermal decomposition behavior of the films was analyzed by X-ray diffraction, scanning electron microscopy, and thermogravimetric analysis, and the film formation mechanism was suggested. The as-deposited precursor film gradually decomposed with increase in temperature and formed Cu_2−xSe and In₂Se₃ nuclei on the surface of the film. Incorporation of Cu_2−xSe with In₂Se₃ yielded a chalcopyrite CIS phase, which crystallized on annealing above 400 °C. The obtained CIS film showed low-resistive ohmic behavior with a Mo electrode and a high absorption efficiency for visible–infrared (IR) light, making it suitable for use in photovoltaic applications.     

Crystal growth of KInO2 from a hydroxide flux

Single crystals of KInO₂ were obtained from a reactive potassium hydroxide flux at 700 °C. KInO₂ crystallizes in the R-3m crystal system with a=3.2998(10) Å, c=18.322(10) Å and V=172.78(12) Å³. The crystal structure is isotypic with that of α-NaFeO₂ and consists of the (1 1 1) layers being occupied alternately by KO₆ and InO₆ octahedra. Three different AInO₂ structure types are discussed.     

Thermal treatment-dependent chemical composition of ternary CdS1−xSex nanocrystals grown in borosilicate glass

Variation of the chemical composition of ternary CdS_1−xSe_x nanocrystals grown in borosilicate glass depending on the thermal treatment is studied by resonant Raman spectroscopy. It is shown that only for the nanocrystals with roughly equal content of substitutive S and Se chalcogen atoms (0.4<x<0.6) the nanocrystal composition is independent of the thermal treatment parameters. In other cases an increase of the thermal treatment temperature (625–700 °C) and duration (2–12 h) results in a considerable increase of the predominant chalcogen content in the nanocrystals.     

The effects of annealing on non-polar (1 1 2¯ 0) a-plane GaN films

Non-polar a-plane (1 1 2¯ 0) GaN films were grown on r-plane sapphire by metal–organic vapor phase epitaxy and were subsequently annealed for 90 min at 1070 °C. Most dislocations were partial dislocations, which terminated basal plane stacking faults. Prior to annealing, these dislocations were randomly distributed. After annealing, these dislocations moved into arrays oriented along the [0 0 0 1] direction and aligned perpendicular to the film–substrate interface throughout their length, although the total dislocation density remained unchanged. These changes were accompanied by broadening of the symmetric X-ray diffraction 1 1 2¯ 0 ω-scan widths. The mechanism of movement was identified as dislocation glide, occurring due to highly anisotropic stresses (confirmed by X-ray diffraction lattice parameter measurements) and evidenced by macroscopic slip bands observed on the sample surface. There was also an increase in the density of unintentionally n-type doped electrically conductive inclined features present at the film–substrate interface (as observed in cross-section using scanning capacitance microscopy), suggesting out-diffusion of impurities from the substrate along with prismatic stacking faults. These data suggest that annealing processes performed close to film growth temperatures can affect both the microstructure and the electrical properties of non-polar GaN films.     

Stacking pattern of multi-layer InAs quantum wires embedded in In0.53Ga0.47−xAlxAs matrix layers grown lattice-matched on InP substrate

Multi-layer InAs quantum wires were grown on, and embedded in In_0.53Ga_0.47−xAl_xAs (with x=0, 0.1, 0.3 and 0.48) barrier/spacer layers lattice matched to an InP substrate. Correlated stacking of the quantum wire arrays were observed with aluminum content of 0 and 0.1. The quantum wire stacks became anti-correlated as the aluminum content was increased to 0.3 and 0.48. The origin of such stacking pattern variation was investigated by finite element calculations of the chemical potential distribution for indium on the growth front surface of the capping spacer layer. It is shown that the stacking pattern transition is determined by the combined effect of strain and surface morphology on the growth front of the spacer layers.     

Polar dependence of impurity incorporation and yellow luminescence in GaN films grown by metal-organic chemical vapor deposition

We have investigated the unintentional impurities, oxygen and carbon, in GaN films grown on c-plane, r-plane as well as m-plane sapphire by metal-organic chemical vapor deposition. The GaN layer was analyzed by secondary ion mass spectroscopy. The different trend of the incorporation of oxygen and carbon has been explained in the polar (0 0 0 1), nonpolar (1 1 2¯ 0) and semipolar (1 1 2¯ 2) GaN by a combination of the atom bonding structure and the origin direction of the impurities. Furthermore, it has been found that there is a stronger yellow luminescence (YL) in GaN with higher concentration of carbon, suggesting that C-involved defects are originally responsible for the YL.     

Investigation of nonpolar (1 1 2¯ 0) a-plane ZnO films grown under various Zn/O ratios by plasma-assisted molecular beam epitaxy

Structural and optical properties of nonpolar a-plane ZnO films grown with different II/VI ratios on r-plane sapphire substrates by plasma-assisted molecular beam epitaxy were investigated. Even by increasing the II/VI ratio across the stoichiometric flux condition a consistent surface morphology of striated stripes along the ZnO 〈0 0 0 1〉 direction without any pit formation was observed, which is contrary to polar c-plane ZnO films. Root mean square surface roughness, full width at half maximum values of X-ray rocking curves, defect densities, and photoluminescence were changed with the II/VI ratio. The sample grown with stoichiometric flux condition showed the lowest value of rms roughness, the smallest threading dislocation and stacking fault densities of ∼4.7×10⁸ cm⁻² and ∼9.5×10⁴ cm⁻¹, respectively, and the highest intensity of D^oX peak. These results imply that the stoichiometric flux growth condition is suitable to obtain superior structural and optical properties compared to other flux conditions.     

Effect of NH3 flow rate on m-plane GaN growth on m-plane SiC by metalorganic chemical vapor deposition

This paper reports a study of the effect of NH₃ flow rate on m-plane GaN growth on m-plane SiC with an AlN buffer layer. It is found that a reduced NH₃ flow rate during m-plane GaN growth can greatly improve the recovery of in situ optical reflectance and the surface morphology, and narrow down the on-axis (1 0 1¯ 0) X-ray rocking curve (XRC) measured along the in-plane a-axis. The surface striation along the in-plane a-axis, a result of GaN island coalescence along the in-plane c-axis, strongly depends on the NH₃ flow rate, an observation consistent with our recent study of kinetic Wulff plots. The pronounced broadening of the (1 0 1¯ 0) XRC measured along the c-axis is attributed to the limited lateral coherence length of GaN domains along the c-axis, due to the presence of a high density of basal-plane stacking faults, most of which are formed at the GaN/AlN interface, according to transmission electron microscopy.     

Growth and characterization of c-plane AlGaN on γ-LiAlO2

This study demonstrates a pure c-plane AlGaN epilayer grown on a γ-LiAlO₂ (1 0 0) (LAO) substrate with an AlN nucleation layer grown at a relatively low temperature (LT-AlN) by metal-organic chemical vapor deposition (MOCVD). The AlGaN film forms polycrystalline film with m- and c-plane when the nucleation layer grows at a temperature ranging from 660 to 680 °C. However, a pure c-plane AlGaN film with an Al content of approximately 20% can be obtained by increasing the LT-AlN nucleation layer growth temperature to 700 °C. This is because the nuclei density of AlN increases as the growth temperature increases, and a higher nuclei density of AlN deposited on LAO substrate helps prevent the deposition of m-plane AlGaN. Therefore, high-quality and crack-free AlGaN films can be obtained with a (0 0 0 2) ω-rocking curve FWHM of 547 arcsec and surface roughness of 0.79 nm (root-mean-square) using a 700-°C-grown LT-AlN nucleation layer.     

Optical property analysis of CZT:In single crystals after annealing by a two-step method

Indium-doped Cd_1−xZn_xTe (CZT:In) single crystals were annealed by a two-step method, including a high-temperature step and a low-temperature step in sequence. IR transmittance spectrum, I–V curve and PL spectrum were used to characterize the CZT single crystals. After annealing, the opto-electrical properties of the CZT:In crystals were improved obviously. The average IR transmittance was remarkably increased by about 23%, and the resistivity was enhanced by as high as four orders of magnitude. In the PL spectra, the intensity of the (D⁰, X) peak prominently increased, and the full-width-at-half-maximum was reduced. Meanwhile, the intensity of the DAP peak decreased greatly, and the structure became practically indistinguishable from the background. Moreover, the intensity of the D_complex peak also decreased. The investigation shows that these improvements in the physical properties after annealing are due to variations in the micro-structures. The two-step annealing method can eliminate precipitates/inclusions, remove impurities, compensate Cd vacancies, decrease dislocations and reduce internal stress.     

Nonpolar m- and a-plane GaN thin films grown on γ-LiAlO2 substrates

Pure single-phase m- and a-plane GaN layers were fabricated on (1 0 0)- and (3 0 2)-planes of γ-LiAlO₂ (LAO) substrate via metelorganic vapor deposition, respectively. Raman spectra measurement indicates that the crystallinity gradually improves with increasing layer thickness, and smaller stress exists in an a-GaN film. (3 0 2)-Plane LAO appears suitable for fabricating high-quality a-GaN layers because the layer on it shows a smoother surface with the root mean square of 60 nm, higher transmittance (85%) and narrower full-width at half-maximum value (FWHM) of X-ray rocking curve (1123 arcsec) than m-GaN on (1 0 0)-plane LAO (1735 arcsec).