MOVPE of AlN-free hexagonal GaN/cubic SiC/Si heterostructures for vertical devices

The heterostructures of GaN/SiC/Si were prepared without using AlN or AlGaN buffer layers (AlN buffers) in the metalorganic vapor phase epitaxy of GaN on SiC. GaN (0 0 0 1) with specular surface was obtained. The AlN buffers are usually used in the conventional growth of GaN on SiC due to the poor nucleation of GaN on SiC. Instead, the nucleation of GaN was controlled by varying the partial pressure of H₂ in the carrier gas, the mixture of H₂ and N₂, during the low-temperature (600 °C) growth of GaN (LT-GaN). After the LT-GaN, the high-temperature (1000 °C) growth of GaN was performed using pure H₂ as the carrier gas. The epitaxial film of cubic SiC (1 1 1) on a Si (1 1 1) substrate was used as the SiC template. Increasing the partial pressure of H₂ in the carrier gas decreased the coverage of SiC surface by LT-GaN. It is suggested that the hydrogen atoms adsorbed on the surface of SiC is preventing the nucleation of GaN.     

Maskless selective growth of semi-polar (1 12¯ 2) GaN on Si (3 1 1) substrate by metal organic vapor phase epitaxy

Semi-polar (1 1 2¯ 2) GaN layers were selectively grown by metal organic chemical vapor phase epitaxy on patterned Si (3 1 1) substrates without SiO₂ amorphous mask. The (1 1 2¯ 2) GaN layers could be selectively grown only on Si (1 1 1) facets when the stripe mask width was narrower than 1 μm even without SiO₂. Inhomogeneous spatial distribution of donor bound exciton (DBE) peak in low-temperature cathodoluminescence (CL) spectra was explained by the difference of growth mode before and after the coalescence of stripes. It was found that the emission intensity related crystal defects is drastically decreased in case of selective growth without SiO₂ masks as compared to that obtained with SiO₂ masks.     

Growth of GaN based structures on Si(1 1 0) by molecular beam epitaxy

The growth of GaN based structures on Si(1 1 0) substrates by molecular beam epitaxy using ammonia as the nitrogen precursor is reported. The structural, optical and electrical properties of such structures are assessed and are quite similar to the ones obtained on Si(1 1 1) in-spite of the very different substrate surface symmetry. A threading dislocation density of 3.7×10⁹ cm⁻² is evaluated by transmission electron microscopy, which is in the low range of typical densities obtained on up to 2 μm thick GaN structures grown on Si(1 1 1). To assess the potential of such structure for device realization, AlGaN/GaN high electron mobility transistor and InGaN/GaN light emitting diode heterostructures were grown and their properties are compared with the ones obtained on Si(1 1 1).     

Structural and electrical properties of Si-doped a-plane GaN grown on r-plane sapphire by MOVPE

Approximately 2-μm-thick Si-doped a-plane GaN films with different doping concentrations were grown on approximately 8-μm-thick undoped a-plane GaN/r-sapphire by metal organic vapor phase epitaxy (MOVPE). The structural and electrical properties of the Si-doped a-plane GaN films were investigated by high-resolution X-ray diffraction (HRXRD), atomic force microscopy (AFM) and temperature-dependent Hall measurement. The results showed that a small amount of Si doping can improve the surface morphology and decrease the density of pits. Upon increasing the CH₃SiH₃ flow rate, the crystalline quality of the (0 0 0 2) plane was slightly improved. The highest room-temperature mobility of 83.4 cm²/Vs was obtained at a carrier density of 6.2×10¹⁸ with a CH₃SiH₃ flow rate of 10 sccm.     

Reduction of dislocations in a (1 1 2¯ 2)GaN grown by selective MOVPE on (1 1 3)Si

Two-step selective epitaxy (SAG/ELO) of (1 1 2¯ 2)GaN on (1 1 3)Si substrate is studied to reduce the defect density in the epitaxial lateral overgrowth. The first SAG/ELO is to prepare a (1 1 2¯ 2)GaN template on a (1 1 3)Si and the second SAG/ELO is to get a uniform (1 1 2¯ 2)GaN. It is found that the reduction of the defect density is improved by optimizing the mask configuration in the second SAG/ELO. The minimum dark spot density obtained is 3×10⁷/cm², which is two orders of magnitude lower than that found in a (0 0 0 1)GaN grown on (1 1 1)Si.     

Growth of (1 0 1¯ 3¯ ) semipolar GaN on m-plane sapphire by hydride vapor phase epitaxy

The crystalline, surface, and optical properties of the (1 0 1¯ 3¯) semipolar GaN directly grown on m-plane sapphire substrates by hydride vapor phase epitaxy (HVPE) were investigated. It was found that the increase of V/III ratio led to high quality (1 0 1¯ 3¯) oriented GaN epilayers with a morphology that may have been produced by step-flow growth and with minor evidence of anisotropic crystalline structure. After etching in the mixed acids, the inclined pyramids dominated the GaN surface with a density of 2×10⁵ cm⁻², revealing the N-polarity characteristic. In the low-temperature PL spectra, weak BSF-related emission at 3.44 eV could be observed as a shoulder of donor-bound exciton lines for the epilayer at high V/III ratio, which was indicative of obvious reduction of BSFs density. In comparison with other defect related emissions, a different quenching behavior was found for the 3.29 eV emission, characterized by the temperature-dependent PL measurement.     

Growth of thick GaInN on grooved (1 0 1¯ 1¯) GaN/(1 0 1¯ 2¯) 4H-SiC

We succeeded in growing high-crystalline-quality thick (1 0 1¯ 1¯) Ga_0.92In_0.08N films on a grooved (1 0 1¯ 1¯) GaN/(1 0 1¯ 2¯) 4H-SiC underlying layer. We also fabricated GaInN/GaN multiple quantum wells (MQWs) with a peak wavelength of 580 nm on a high-crystalline-quality thick GaInN film. The photoluminescence intensity of the MQWs is about six times higher than that of MQWs grown on planar GaN and twice as high as that of MQWs grown on a GaN underlying layer having the same grooved structure.     

Optical properties of MOVPE-grown a-plane GaN and AlGaN

a-Plane GaN and AlGaN were grown on r-plane sapphire by low-pressure metal-organic vapor epitaxy (LP-MOVPE), and the effects of reactor pressure (from 40 to 500 Torr) and growth temperature (from 1020 to 1100 °C) on the crystalline quality and surface morphology of a-plane GaN were studied. The a-plane GaN grown under 40 Torr had a smooth-surface morphology but a poor crystalline quality; however, the a-plane GaN grown under 500 Torr had higher crystalline quality and optical properties, whose full-width at half-maximum of the X-ray rocking curve (XRC-FWHM) and intensity of yellow luminescence (YL) were smaller. Furthermore, the optical properties of a-plane GaN were investigated by photoluminescence (PL) in detail. We also studied the emission properties of a-plane Al_0.35Ga_0.65N grown at room temperature.     

AlN buffer layer growth for GaN epitaxy on (1 1 1) Si: Al or N first?

AlN is generally used as buffer layer for the epitaxial growth of GaN on Si(1 1 1) substrate. In this work, we specifically address the relationship between the way the AlN growth is initiated on the Si(1 1 1) surface and the overall properties of the final GaN epitaxial layer. The growth is performed by molecular beam epitaxy with ammonia (NH₃) as nitrogen source. Two procedures have been compared: exposing the Si surface first to NH₃ or Al. The AlN nucleation is followed in real-time by reflection high-energy electron diffraction and critical stages are also investigated in real space using scanning tunnelling microscopy and transmission electron microscopy. Atomic force microscopy, X-ray diffraction and photoluminescence are also used to assess the properties of the final GaN epitaxial layer. It is shown that best results in terms of GaN overall properties are obtained when the growth is initiated by exposing the Si(1 1 1) surface to NH₃ first. This is mainly due to the fact that almost an order of magnitude decrease of the dislocation density is obtained.     

Influence of AlGaN/GaN/InGaN superlattice on the characteristics of LEDs grown by metalorganic chemical vapor deposition

This study examined the influence of strain-compensated triple AlGaN/GaN/InGaN superlattice structures (SLs) in n-GaN on the structural, electrical and optical characteristics of LEDs by analyzing the etch pits density (EPD), stress measurement, high-resolution X-ray diffraction (HRXRD), sheet resistance, photoluminescence (PL) and light–current–voltage (L–I–V). EPD, stress measurement and HRXRD studies showed that the insertion of AlGaN/GaN/InGaN SLs during the growth of n-GaN effectively distributed and compensated for the strong compressive stress, and decreased the dislocation density in n-GaN. The operating voltage at 20 mA for the LEDs grown with SLs decreased to 3.18 V from 3.4 V for the LEDs grown without SLs. In addition, a decrease in the spectral blue shift compared to the LEDs grown without SLs was observed in the LEDs grown with the SLs.     

Hydride-assisted growth of GaN nanowires on Au/Si(0 0 1) via the reaction of Ga with NH3 and H2

High quality, straight GaN nanowires (NWs) with diameters of 50 nm and lengths up to 3 μm have been grown on Si(0 0 1) using Au as a catalyst and the direct reaction of Ga with NH₃ and N₂:H₂ at 900 °C. These exhibited intense, near band edge photoluminescence at 3.42 eV in comparison to GaN NWs with non-uniform diameters obtained under a flow of Ar:NH₃, which showed much weaker band edge emission due to strong non-radiative recombination. A significantly higher yield of β-Ga₂O₃ NWs with diameters of ≤50 nm and lengths up to 10 μm were obtained, however, via the reaction of Ga with residual O₂ under a flow of Ar alone. The growth of GaN NWs depends critically on the temperature, pressure and flows in decreasing order of importance but also the availability of reactive species of Ga and N. A growth mechanism is proposed whereby H₂ dissociates on the Au nanoparticles and reacts with Ga giving Ga_xH_y thereby promoting one-dimensional (1D) growth via its reaction with dissociated NH₃ near or at the top of the GaN NWs while suppressing at the same time the formation of an underlying amorphous layer. The higher yield and longer β-Ga₂O₃ NWs grow by the vapor liquid solid mechanism that occurs much more efficiently than nitridation.     

N-type doping of GaN/Si(1 1 1) using Al0.2Ga0.8N/ALN composite buffer layer and Al0.2Ga0.8N/GaN superlattice

The characteristics of Si-doped and undoped GaN/Si(1 1 1) heteroepitaxy with composite buffer layer (CBL) and superlattice are compared and discussed. While as-grown Si-doped GaN/Si(1 1 1) heteroepitaxy shows lower quality compared to undoped GaN, crack-free n-type and undoped GaN with the thickness of 1200 nm were obtained by metalorganic chemical vapor deposition (MOCVD). In order to achieve the crack-free GaN on Si(1 1 1), we have introduced the scheme of multiple buffer layers; composite buffer layer of Al_0.2Ga_0.8N/AlN and superlattice of Al_0.2Ga_0.8N/GaN on 2-in. Si(1 1 1) substrate, simultaneously. The FWHM values of the double-crystal X-ray diffractometry (DCXRD) rocking curves were 823 arcsec and 745 arcsec for n-GaN and undoped GaN/Si(1 1 1) heteroepitaxy, respectively. The average dislocation density on GaN surface was measured as 3.85×10⁹ and 1.32×10⁹ cm⁻² for n-GaN and undoped GaN epitaxy by 2-D images of atomic force microscopy (AFM). Point analysis of photoluminescence (PL) spectra was performed for evaluating the optical properties of the GaN epitaxy. We also implemented PL mapping, which showed the distribution of edge emission peaks onto the 2 inch whole Si(1 1 1) wafers. The average FWHMs of the band edge emission peak was 367.1 and 367.0 nm related with 3.377 and 3.378 eV, respectively, using 325 nm He-Cd laser as an excitation source under room temperature.     

Growth and optical properties of high-density InN nanodots

High density InN/GaN nanodots were grown by pulsed mode (PM) metal–organic chemical vapor deposition (MOCVD). InN nanodots density of up to ∼5×10¹⁰ cm⁻² at a growth temperature of 550 °C was achieved. The high diffusion activation energy of 2.65 eV due to high NH₃ flow rate generated more reactive nitrogen adatoms on the growth surface, and is believed to be the main reason for the growth of high density InN nanodots. In addition, an anomalous temperature dependence of the PL peak energy was observed for high density InN nanodots. The high carrier concentration, due to high In vacancy (V_In) in the InN nanodots, thermally agitated to the conduction band. As the measurement temperature increased, the increase of Fermi energy resulted in blue-shifted PL peak energy. From the Arrhenius plot of integrated PL intensity, the thermal activation energy for the PM grown InN nanodots was estimated to be E_a∼51 meV, indicating strong localization of carriers in the high density InN nanodots.     

MOVPE growth and properties of GaN on (1 1 1)Si using an AlInN intermediate layer

Using an AlInN intermediate layer, GaN was grown on (1 1 1)Si substrate by selective metalorganic vapor phase epitaxy. The variation of the surface morphology was investigated as a function of the In composition and thickness of the AlInN layer. It was found that the In composition in the AlInN layer was a function of the growth temperature and thickness. Because of the small band offset at the AlInN/Si hetero-interface, we have achieved a low series resistance of the order of 9 Ω (0.0036 Ω cm²) across the GaN/AlInN/AlN/Si layer structure.     

Development of m-plane GaN anisotropic film properties during MOVPE growth on LiAlO2 substrates

The anisotropic film properties of m-plane GaN deposited by metal organic vapour phase epitaxy (MOVPE) on LiAlO₂ substrates are investigated. To study the development of layer properties during epitaxy, the total film thickness is varied between 0.2 and 1.7 μm. A surface roughening is observed caused by the increased size of hillock-like features. Additionally, small steps which are perfectly aligned in (1 1 −2 0) planes appear for samples with a thickness of ∼0.5 μm and above. Simultaneously, the X-ray rocking curve (XRC) full width at half maximum (FWHM) values become strongly dependent on incident X-ray beam direction beyond this critical thickness. Anisotropic in-plane compressive strain is initially present and gradually relaxes mainly in the [1 1 −2 0] direction when growing thicker films. Low-temperature photoluminescence (PL) spectra are dominated by the GaN near-band-edge peak and show only weak signal related to basal plane stacking faults (BSF). The measured background electron concentration is reduced from ∼10²⁰ to ∼10¹⁹ cm⁻³ for film thicknesses of 0.2 μm and ∼1 μm while the electron mobilities rise from ∼20 to ∼130 cm²/V s. The mobilities are significantly higher in [0 0 0 1] direction which we explain by the presence of extended planar defects in the prismatic plane. Such defects are assumed to be also the cause for the observed surface steps and anisotropic XRC broadening.     

HRTEM investigation of high-reflectance AlN/GaN distributed Bragg-reflectors by inserting AlN/GaN superlattice

A high-quality AlN/GaN distributed Bragg-reflectors (DBR) was successfully grown on sapphire substrate by low-pressure metal-organic chemical vapor deposition using ultra-thin AlN/GaN superlattice insertion layers (SLILs). The reflectivity of AlN/GaN DBR with ultra-thin AlN/GaN SLIL was measured and achieved blue peak reflectivity of 99.4% at 462 nm. The effect of ultra-thin AlN/GaN superlattice insertion layer was examined in detail by transmission electron microscopy, and indicated that the crack of AlN/GaN DBR can be suppress by inserting AlN/GaN SLIL. For electronic properties, the turn on voltage is about 4.1 V and CW laser action of vertical-cavity surface-emitting laser (VCSEL) was achieved at a threshold injection current of 1.4 mA at 77 K, with an emission wavelength of 462 nm.     

Growth and properties of semi-polar GaN on a patterned silicon substrate

Adopting anisotropy etching method, a (1 1 1) facet of Si is obtained on a Si substrate and selective area growth (SAG) of GaN is performed with metal-organic vapor phase epitaxy on the facet. The epitaxial lateral overgrowth of (1 1¯ 0 1), (1 1 2¯ 2) GaN is investigated on (0 0 1) and (1 1 3) Si substrate, respectively, and the incorporation properties of Si, C, and Mg elements are discussed in relation to the atomic configuration on the surface. Analyzing the optical and electrical properties of C-doped (1 1¯ 0 1) GaN layer, it is shown that carbon creates a shallow acceptor level. On the thus prepared (1 1¯ 0 1) GaN layer, a light emitting diode (LED) with a C-doped p-type layer is fabricated.     

Fabrication of (1 1 1)-oriented Si layers on SiO2 substrates by an aluminum-induced crystallization method and subsequent growth of semiconducting BaSi2 layers for photovoltaic application

We have prepared (1 1 1)-oriented Si layers on SiO₂ (fused silica) substrates from amorphous-Si(a-Si)/Al or Al/a-Si stacked layers using an aluminum-induced crystallization (AIC) method. The X-ray diffraction (XRD) intensity from the (1 1 1) planes of Si was found to depend significantly on growth conditions such as the thicknesses of Si and Al, deposition order (a-Si/Al or Al/a-Si on SiO₂), deposition technique (sputtering or vacuum evaporation) and exposure time of the Al layer to air before the deposition of Si. The crystal orientation of the Si layers was confirmed by θ−2θ, 2θ XRD and electron backscatter diffraction (EBSD). The photoresponse properties of semiconducting BaSi₂ films formed on the (1 1 1)-oriented Si layers by the AIC method were measured at room temperature. Photocurrents were clearly observed for photon energies greater than 1.25 eV. The external quantum efficiencies of the BaSi₂ were also evaluated.     

1H-1,2,3-triazole,a promising precursor for chemical vapor deposition of hydrogenated carbon nitride

Well-crystallized hydrogenated carbon nitride thin films have been prepared by microwave plasma enhanced chemical vapor deposition (MWPECVD). 1H-1,2,3-triazole+N₂ and Si (1 0 0) were used as precursor and substrate, respectively. Substrate temperature during the deposition was recorded to be 850 °C. The synthesized samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photo-electron spectroscopy (XPS) analyses. The plasma compositions were checked by optical emission spectroscopy (OES). XRD observation strongly suggests that the films contain polycrystalline carbon nitride with graphitic structure of (1 0 0), (0 0 2), (2 0 0) and (0 0 4). XPS peak quantification reveals that the atomic ratio of the materials C:N:O:Si is 32:41:18:9. X-ray photo-electron peak deconvolution shows that the most dominant peak of C (1s) and N (1s) narrow scans correspond to sp² hybrid structure of C₃N₄. These observations indicate that 1H-1,2,3-triazole favors the formation of hydrogenated carbon nitride with graphitic phase by CVD method and thus is in good agreement with XRD results. SEM of surface and OES of plasma also support the formation of polycrystalline carbon nitride films from 1H-1,2,3-triazole+N₂ by CVD.