N-hydroxy-N,N'-diphenylcinnamamidine (HDPCA) as a new reagent for extractive separation and photometric determination of vanadium(V)

N-hydroxy-N,N′-diphenylcinnamamidine (HDPCA) forms a blue-violet coloured 1:2 complex (metal:ligand) with vanadium(V), which can be quantitatively extracted into chloroform from 1.0–9.5M acetic acid medium. Based on this colour reaction, a sensitive and highly selective method for the spectrophotometric determination of microgram quantities of vanadium(V) has been developed. The complex shows maximum absorption at 570 nm and obeys Beer's law in the vanadium concentration range 0.6–12.5 μg/ml. The method has been applied to alloy steels.     

Extraction-spectrophotometric determination of vanadium with 5,5′-dithiodisalicylhydroxamic acid (DTDSHA)

A new method for the extraction-spectrophotometric determination of V(V) is proposed. The violet complex V(V)-5,5′-dithiodisalicylhydroxamic acid formed in aqueous medium (pH 5.0) is extracted into a solution of trioctylmethylammonium chloride (Adogen 464) in toluene, and its spectrophotometric characteristics are studied. The stoichiometry of the complexes formed is 1:1 and 2:1 (reagent:vanadium), and 1:3 for the ionic association complex (2:1):trioctylmethylammonium ion. The system follows Beer's law at pH 5.0 (λ = 550 nm) over the concentration range 0.4 to 2.0 ppm (ε = 7.34 × 10³ liter · mol⁻¹ · cm⁻¹). The method is applied for the determination of vanadium in steel.     

Spectrophotometric study of vanadium(V)-phenylfluorone complex

Spectrophotometric studies of the reaction between vanadium(V) ions and phenylfluorone are presented and used for spectrophotometric determination of vanadium(V). The absorbance at 520 nm obeys Beer's law in the range of 2–15 μg vanadium/10 ml at pH 4. The relative standard deviation is 2% and the molar absorptivity based on vanadium is 2.1 × 10⁴ liters/mol cm. The composition of the complex in solution is of the 1:1 type with stability constant values to 2.5 × 10⁴. Analysis of the solid complex shows that its formula agrees with the formula (C₁₉ H₁₁ O₅)VO₂ · 5H₂O.     

Determination of vanadium(V) with 3-(2-hydroxy-5-methylphenyl)-5-(p-methoxyphenyl)isoxazoline (HMPAO)

The extraction studies of vanadium(V) with 3-(2-hydroxy-5-methylphenyl)-5-(p-methoxyphenyl) isoxazoline (HMPAO) have been done. Vanadium is extracted into chloroform as a yellow-colored complex with HMPAO from 8.0 M HCl medium. The complex absorbs maximum at 400 nm. The system conforms to Beer's law over the concentration range 1.1–39 μg of vanadium per milliliter. The color of the complex was stable for 60 hr. Vanadium was extracted quantitatively and was determined in the presence of large number of foreign ions associated with it. The extractable species was 1:2 (V:HMPAO) in nature. The stability constants of the complex were determined by Yatsimirskii's and Leden's methods.     

LET dependence of the formation of oxidative damage 8-hydroxy-2′-deoxyguanosine (8-OHdG) in 2′-deoxyguanosine aqueous solution irradiated with heavy ions

To evaluate the contribution of indirect action mediated by OH radicals in biological effects of high LET radiations, we examined the production of 8-hydroxy-2′-deoxyguanosine (8-OHdG) in 2′-deoxyguanosine aqueous solution using various ion species with an LET range from 20 to 300 keV/μm. The 8-OHdG yield decreased with increasing LET. In the hypoxic irradiation condition, the yield showed constant or rather increasing tendency above about 100 keV/μm, which is consistent with an oxygen-in-the-track hypothesis to explain the diminishment of oxygen effect.     

Electrochemical, spectroelectrochemical and theoretical studies on the reduction and deprotonation of the photovoltaic sensitizer [(H3-tctpy)Ru(NCS)3] (H3-tctpy=2,2′:6′,2′′-terpyridine-4,4′,4′′-tricarboxylic acid)

The electrochemical reduction of the black dye photosensitizer [(H₃-tctpy)Ru^II(NCS)₃]⁻ (H₃-tctpy=2,2′:6′,2′′-terpyridine-4,4′,4′′-tricarboxylic acid) used in photovoltaic cells has been found to be a complex process when studied in dimethylformamide. At low temperatures, fast scan rates and at a glassy carbon electrode, the chemically reversible ligand based one-electron reduction process [(H₃-tctpy)Ru(NCS)₃]⁻+e⁻[(H₃-tctpy√⁻)Ru(NCS)₃]²⁻ is detected. This process has a reversible half-wave potential (E^r_1/2) of −1585±20 mV versus Fc/Fc⁺ at 25°C. Under other conditions, a deprotonation reaction occurs upon reduction, which produces [(H_3−x-tctpy^x−)Ru(NCS)₃]^(1+x)− and hydrogen gas. Mechanistic pathways giving rise to the final products are discussed. The E^r_1/2-value for the ligand based reductions of the deprotonated complex is 0.70 V more negative than for [(H₃-tctpy)Ru(NCS)₃]⁻. Consequently, data obtained from molecular orbital calculations are consistent with the reaction [(H₃-tctpy)Ru(NCS)₃]⁻+e⁻→[(H₂-tctpy⁻)Ru(NCS)₃]²⁻+1/2H₂ yielding the monodeprotonated complex as the major product obtained after electrochemical reduction of [(H₃-tctpy)Ru(NCS)₃]⁻. The E^r_1/2-values for the metal based Ru^II/III process differ by 0.30 V when data obtained for the protonated and deprotonated forms of the black dye are compared. Electronic spectra obtained during the course of experiments in an optically transparent thin layer electrolysis configuration are consistent with the overall reaction scheme proposed on the basis of voltammetric measurements and molecular orbital calculations. Reduction studies on the free ligand, H₃-tcpy, are consistent with results obtained with [(H₃-tctpy)Ru(NCS)₃]⁻.     

Kinetic study of the complex reaction between copper(II) and 2-(2′-hydroxy-3′-methoxyphenyl)benzothiazole

2-(2′-Hydroxy-3′-methoxyphenyl)benzothiazole reacts with copper(II) in an ethanol/water mixture to form an O,S chelate which exhibits the remarkable property of changing the chelation site above a pH of ca. 5.0, to the O,N site. The detailed kinetics of this reaction in an ethanol/water mixture (3:1) at a temperature of 25 °C was investigated using a stopped-flow spectrophotometric technique employing a wavelength of 400 nm. The initial complex, Cu(O,S), is formed via a fast, reversible second-order complex formation step whereupon the formation of the Cu (O,N) follows first order kinetics. The Cu(O,N) complex is, however, unstable towards internal electron exchange and after the reaction is complete, a black polymeric material very slowly precipitates out of solution. Rate and equilibrium constants for the postulated reactions are presented and discussed.     

Microdetermination of silver(I) and iodide ions with a pyridinol azo dye: A spectrophotometric method

A simple, rapid, sensitive, and selective method for the spectrophotometric microdetermination of silver(I) using ammonium(2′,3′-dihydroxy pyridyl-4′-azo)benzene-4-arsonate (DHP-4A), a water soluble pyridinol azo dye is proposed. The red colored 1:1 (metal to ligand) complex formed has molar extinction coefficient (ε) 2.95 × 10⁴ 1 mol⁻¹ cm⁻¹ and absorbs maximum at 535 nm, in highly alkaline medium. Beer's law is obeyed up to 3.36 ppm and Sandell's sensitivity (for an absorbance 0.001) is 0.0037 μg of Ag(I)/cm². The silver(I)-(DHP-4A) complex has also been used in the microdetermination of iodide ions using ligand exchange reaction. The optimum concentration range of iodide ions which can reproducibly be determined is 1.27–37.9 μg/10 ml.     

The Liquid-Liquid Extraction of Copper(II), Nickel(II), and Cobalt(II) with 2,2′-Pyridil-mono-(2-quinolylhydrazone)

A 1:1 synthesis of 2-quinolylhydrazine with 2,2′-pyridil yields the hydrazone 2,2′-pyridil-mono-(2-quinolylhydrazone). In either the Z or E isomeric configuration, the molecule can serve as a tridentate ligand. Equilibrium studies were carried out to determine the effects of pH and concentration of ligand and metal on the distribution of the extracted complex into methyl isobutyl ketone. Graphical analysis of the slopes of the plot of the logarithm of the distribution coefficient vs pH, log [ligand], and log [M(II)] will determine the stoichiometry and polymerization of the complex. In the extraction of Cu(II), Ni(II), and Co(II), there is a small change in log D, where D is the distribution coefficient, with pH indicating the presence of a weakly dissociated ligand. Ligand:metal (1:1) ion-paired species are extracted, each having three absorption peaks in the region 400-550 nm. While a spectrophotometrtc method for each element does not seem feasible due to simultaneous extraction and overlapping absorbances, an extractive-atomic absorption method for the analysis of 1.6 ppm of Cu(II) is presented. Excesses of 20-70 ppm Co(II), Zn(II), Cd(II), Cl⁻, NO₃⁻, and SO₄²⁻ do not interfere.     

Solvent Extraction of Vanadium(V) as a Ternary Complex with N-Hydroxy-N-p-Chlorophenyl-N′-(2-Methyl-5-Chloro)-Phenyl-p-Toluamidine Hydrochloride and p-Chlorophenol

N-Hydroxy-N-p-chlorophenyl-N′-(2-methyl-5-chloro)-phenyl-p-toluamidine hydrochloride (HCPMCPTH) reacts with vanadium(V) to form a 1:2 (metal:reagent) blue-violet complex which can be quantitatively extracted into chloroform from acetic acid solutions. The deep blue adduct having 1:2:1 (V:HCPMCPTH:PCP) stoichiometry gets quantitatively extracted into chloroform from 0–2.5 M acetic acid media. The formation of the ternary complex has been made the basis for the development of a simple, rapid, sensitive and selective extractive-photometric method for the determination of microamounts of vanadium(V). The method has been applied to the determination of vanadium in steels.     

Reaction and relaxation of vibrationally excited molecules: a classical trajectory study of Br + HCl(υ′) and Br + DCl(υ′) collisions

a quasiclassical trajectory study has been carried out to investigate the dynamics of collisions between Br + HCl (1 υ′ 4) and Br + DCl (υ′ = 2,3). For HCl (υ′ 2) and DCl (υ′ = 3), the endoergic reaction producing Cl + HBr occurs readily, and at approximately the same rate as vibrational deactivation in non-reactive collisions. For HCl(υ′ = 2) and DCl(υ′ = 3), where the initial vibrational energies are similar to |ΔE₀ for the reaction, the rates of both reactive and inelastic processes are quite strongly temperature dependent but the ratio of reactive to inelastic encounters is not a strong function of T. Comparison of the calculated results for Br + HCl(υ′ = 1) with experimentally determined rates strongly suggests that, at least at low temperatures, removal of HCl(υ′ = 1) by Br atoms occurs predominantly via electronically non-adiabatic vibrational relaxation.     

Approaches to wired terpyridine: Bithienyl alkynyl derivatives of 2,2′:6′,2″-terpyridine and their ruthenium(II) complexes

Two approaches to the formation of ruthenium(II) complexes containing ligands with conjugated 2,2′:6′,2″-terpyridine (tpy), alkynyl and bithienyl units have been investigated. Bromination of 4′-(2,2′-bithien-5′-yl)-2,2′:6′,2″-terpyridine leads to 4′-(5-bromo-2,2’-bithien-5′-yl)-2,2′:6′,2″-terpyridine (1), the single crystal structure of which has been determined. The complexes [Ru(1)₂][PF₆]₂ and [Ru(tpy)(1)][PF₆]₂ have been prepared and characterized. Sonogashira coupling of the bromo-substituent with (TIPS)CCH did not prove to be an efficient method of preparing the corresponding complexes with pendant alkynyl units. The reaction of 4′-ethynyl-2,2′:6’,2″-terpyridine with 5-bromo-2,2′-bithiophene under Sonogashira conditions yielded ligand 2, and the heteroleptic ruthenium(II) complex [Ru(2)(tpy)][PF₆]₂ has been prepared and characterized.     

Stereoselective total synthesis of (+)-(6R,2′S)-cryptocaryalactone and (−)-(6S,2′S)-epi cryptocaryalactone

The total synthesis of (+)-(6R,2′S)-cryptocaryalactone and (−)-(6S,2′S)-epi cryptocaryalactone is reported based on stereoselective reduction of δ-hydroxy β-keto ester to install 1,3-polyol system, cis Wittig olefination, and lactonization as the key steps. The synthesis of (−)-(6S,2′S)-epi cryptocaryalactone is also reported using syn-benzylidene acetal formation and a preferential Z-Wittig olefination reaction and lactonization as the key steps.     

A divergent synthesis of - and -carbocyclic 4′-fluoro-2′,3′-dideoxynucleosides as potential antiviral agents

- and -Carbocyclic 4′-fluoro-2′,3′-dideoxynucleosides have been synthesized from 2, which can be conveniently prepared from 1,2:5,6-di-O-isopropylidene- -mannitol 1 in eight steps. Ruthenium-catalyzed ring-closing metathesis has been employed in the synthesis of -nucleosides, whereas the -series have been obtained through an intramolecular nucleophilic substitution reaction. The Mitsunobu condensation was used as a general tool for the synthesis of both purine and pyrimidine nucleosides.     

5′,8-Cyclopurine-2′-deoxynucleosides: Molecular structure and charge distribution – DFT study in gaseous and aqueous phase

Oxidatively generated damage to DNA frequently appears in the human genome as an effect of aerobic metabolism or as the result of exposure to exogenous oxidizing agents. Due to these facts, it has been decided to present the structural propriety and charge distribution of 5′,8-cyclo-2′-deoxyadenosine/guanosine (cdA, cdG) in their 5′R and 5′S diastereomeric forms. For all points of quantum mechanics studies presented, the density functional theory (DFT) with B3LYP parameters on 6-311++G** basis set level was used. The 2-deoxyribose moiety of cyclopurines has adopted the ₀T¹ conformation in their cationic, neutral and anionic forms. The natural population analysis (NPA) of charge distribution between purine/2-deoxyribose moieties exhibited positive/positive value for cations, positive/negative for neutral molecules. NPA data for anionic forms showed negative/negative values in gas (exclude (5′S)cdG) and positive/negative in water. The dipole moments of 5′,8-cyclopurine-2′-deoxynucleosides were found as follows: 7.83(5′R)cdG, 6.86(5′S)cdG, 3.99(5′R)cdA, 1.99(5′S)cdA in the gaseous phase, 11.29(5′R)cdG, 9.99(5′S)cdG, 6.44(5′R)cdA, 4.14(5′S)cdA in the aqueous phase.     

A polarographic study of the iron-2-hydroxymethyl-6-(2′-hydroxymethyl-5′-hydroxy-4′-pyrone-6′)-pyranyl-3,2[b]pyran-4,8-dione complex

A polarographic study has been carried out on the colored product formed in the interaction of iron(III) with 2-hydroxymethyl-6-(2′-hydroxymethyl-5′-hydroxy-4′-pyrone-6′)-pyranyl-3,2[b]pyran-4,8-dione. Measurements using the differential pulse method show that iron(III) exhibits a coordination number of 2 and a reproducible formation constant that varies somewhat depending upon the supporting electrolyte employed.     

Theoretical studies on the structural and optical properties of a series of Os(II) diimine complexes [Os(NN)(CO)2I2] (NN = 2,2′-bipyridine(bpy), 4,4′-di-tert-butyl-2,2′-bipyridine(dbubpy), 4,4′-dichlorine-2,2′-bipyridine(dclbpy))

The ground- and excited-state structures for a series of Os(II) diimine complexes [Os(NN)(CO)₂I₂] (NN = 2,2′-bipyridine (bpy) (1), 4,4′-di-tert-butyl-2,2′-bipyridine (dbubpy) (2), and 4,4′-dichlorine-2,2′-bipyridine (dclbpy) (3)) were optimized by the MP2 and CIS methods, respectively. The spectroscopic properties in dichloromethane solution were predicted at the time-dependent density functional theory (TD-DFT, B3LYP) level associated with the PCM solvent effect model. It was shown that the lowest-energy absorptions at 488, 469 and 539 nm for 1–3, respectively, were attributed to the admixture of the [d_xy (Os) → π^*(bpy)] (metal-to-ligand charge transfer, MLCT) and [p(I) → π^*(bpy)] (interligand charge transfer, LLCT) transitions; their lowest-energy phosphorescent emissions at 610, 537 and 687 nm also have the ³MLCT/³LLCT transition characters. These results agree well with the experimental reports. The present investigation revealed that the variation of the substituents from H → t-Bu → Cl on the bipyridine ligand changes the emission energies by altering the energy level of HOMO and LUMO but does not change the transition natures.     

Structural and magnetic properties of “one-dimensional” barium vanadium triselenide

BaVSe₃ has been synthesized and its crystal structure determined at 293(2)°K. The structure was solved in the hexagonal space group P6₃/mmc (D⁴_6h), with a = 6.9990(11) and c = 5.8621(13) Å. Scans (2 Θ) of a polycrystalline sample revealed that BaVSe₃ undergoes a transition to an orthorhombic unit cell (b′ 3^1/2 a, a′ a, c′ c) at 303(5)°K. Magnetic susceptibility measurements between 4 and 300°K indicate that BaVSe₃ is paramagnetic down to 41(1)°K, where magnetic ordering occurs, with a magnetic moment in the ordered phase of 0.2 μ_B per vanadium atom. The orthorhombic lattice distortion may be caused by the “freezing in” of “soft” vibrational modes.     

Spectrophotometric determination of cobalt(II) with 2-(3′-sulfobenzoyl)pyridine benzoylhydrazone

A simple method has been described for the Spectrophotometric determination of cobalt(II) with 2-(3′-sulfobenzoyl)pyridine benzoylhydrazone (SBPBH). In aqueous solution, cobalt(II) reacts with SBPBH to form a yellow complex, which is not destroyed even by the addition of 3.8 M perchloric acid. The absorption maximum of the complex in 1.5 M perchloric acid medium was found to be 400 nm; the molar absorptivity was 2.17 × 10⁴ liters mol⁻¹ cm⁻¹. The proposed method is fairly selective and has been applied to the determination of cobalt in standard alloy steel samples.