含碘鎓盐光产酸剂和增感染料的化学增幅型i-线正性光致抗蚀剂

4,4’-二甲苯基三氟甲磺酸碘鎓盐可以被染料增感,在365 nm光照时分解产酸.尽管产生的酸与染料的胺基发生作用,依然能在后烘过程中催化缩醛聚合物酸敏基团的分解,但需要稍高的后烘温度和稍长的后烘时间.基于此,本文将酚醛树脂、缩醛聚合物、碘鎓盐产酸剂和染料组成了一种新型的化学增幅型i-线正性光致抗蚀剂材料,在曝光量为10...     

I-Line光刻胶材料的研究进展

酚醛树脂-重氮萘醌正型光刻胶由于其优异的光刻性能,在g-line(436 nm)、i-line(365 nm)光刻中被广泛使用.g-line光刻胶胶、i-line光刻胶,两者虽然都是用线型酚醛树脂做成膜树脂,重氮萘醌型酯化物作感光剂,但当曝光波长从g-line发展到i-line时,为适应对应的曝光波长以及对高分辨率的追求,酚醛树脂及感光剂的微观结构均有变化.在i-line光刻胶中,酚醛树脂的邻-邻'相连程度高,感光剂酯化度高,重氮萘醌基团间的间距远.溶解促进剂是i-line光刻胶的一个重要组分,本文对其也进行了介绍.     

A novel photo‐acid generator bound molecular glass resist with a single protecting group

A novel photo‐acid generator (PAG) bound molecular glass photoresist with a single protecting group has been developed as a promising resist material for use in microelectronics. This single component molecular resist was prepared in four steps starting from 9,9‐bis(4‐hydroxyphenyl)fluorene. The single component molecular resist exhibited good thermal properties, such as a 10% weight loss temperature of 200 °C and a glass transition temperature of 91 °C. This resist showed a good sensitivity of 60 μC/cm² with e‐beam exposure (50 keV). On the other hand, the fine pattern with a half‐pitch of 50 nm in the presence of 4 wt % quencher, trioctylamine, was obtained using electron‐beam (100 keV) lithography. The LER value was 8.2 nm (3σ, 60 nm half‐pitch patterns). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Determination of tannic acid by direct chemiluminescence in a FIA assembly

The determination of tannic acid is performed in a FIA assembly on the basis of the analytical output obtained by oxidation of the acid. The analyte solution was daily prepared in a mixture of quinine as sensitiser and perchloric acid and it was injected into a pure water stream acting as a carrier. This solution merges with the mixture potassium permanganate in perchloric medium and the resulting chemiluminescence is monitored. The method was applied over the range 0.5–20 mg l⁻¹ of tannic acid with a LOD 100 μg l⁻¹. The reproducibility was 2.1% and the sample throughput 54 h⁻¹. The influence of foreign substances was studied and the new method is applied to the determination of tannic acid in pharmaceutical and galenic formulations in human urine and surface waters.     

<Emphasis Type="Italic">Arcopilus aureus</Emphasis>, a Resveratrol-Producing Endophyte from <Emphasis Type="Italic">Vitis vinifera</Emphasis>

Due to great interest on producing bioactive compounds for functional foods and biopharmaceuticals, it is important to explore the microbial degradation of potential sources of target biomolecules. Gallotannins are polyphenols present in nature, an example of them is tannic acid which is susceptible to enzymatic hydrolysis. This hydrolysis is performed by tannase or tannin acyl hydrolase, releasing in this way, biomolecules with high-added value. In the present study, chemical profiles obtained after fungal degradation of tannic acid under two bioprocesses (submerged fermentation (SmF) and solid state fermentation (SSF)) were determined. In both fermentation systems (SmF and SSF), Aspergillus niger GH1 strain and tannic acid as a sole carbon source and inducer were used (the presence of tannic acid promotes production of enzyme tannase). In case of SSF, polyurethane foam (PUF) was used like as support of fermentation; culture medium only was used in case of submerged fermentation. Fermentation processes were monitored during 72 h; samples were taken kinetically every 8 h; and all extracts obtained were partially purified to obtain polyphenolic fraction and then were analyzed by liquid chromatography-mass spectrometry (LC-MS). Molecules like gallic acid and n-galloyl glucose were identified as intermediates in degradation of tannic acid; during SSF was identified ellagic acid production. The results obtained in this study will contribute to biotechnological production of ellagic acid.     

单宁酸与牛血红蛋白相互作用的光谱研究

利用荧光光谱技术研究了单宁酸与牛血红蛋白分子的相互作用。实验结果表明:单宁酸分子与BHb发生反应生成基态复合物,导致BHb内源荧光的猝灭,该猝灭属于静态猝灭。测定了不同温度下该反应的表观结合常数、结合位点数及结合热力学参数,热力学参数的变化表明上述作用过程是一个熵增加、自由能降低的自发分子间作用过程,单宁酸与BHb之间以疏水和氢键作用力为主;根据Frster能量转移理论,测得供体与受体间结合距离r和能量转移效率E;并用同步荧光光谱法探讨了单宁酸对BHb构象的影响。     

Gallotannins and Tannic Acid: First Chemical Syntheses and In Vitro Inhibitory Activity on Alzheimer’s Amyloid β‐Peptide Aggregation

The screening of natural products in the search for new lead compounds against Alzheimer’s disease has unveiled several plant polyphenols that are capable of inhibiting the formation of toxic β‐amyloid fibrils. Gallic acid based gallotannins are among these polyphenols, but their antifibrillogenic activity has thus far been examined using “tannic acid”, a commercial mixture of gallotannins and other galloylated glucopyranoses. The first total syntheses of two true gallotannins, a hexagalloylglucopyranose and a decagalloylated compound whose structure is commonly used to depict “tannic acid”, are now described. These depsidic gallotannins and simpler galloylated glucose derivatives all inhibit amyloid β‐peptide (Aβ) aggregation in vitro, and monogalloylated α‐glucogallin and a natural β‐hexagalloylglucose are shown to be the strongest inhibitors.     

The effect of various substances on the suppression of the bitterness of quinine-human gustatory sensation,binding, and taste sensor studies

The purpose of this study was to quantify the degree of suppression of the perceived bitterness of quinine by various substances and to examine the mechanism of bitterness suppression. The following compounds were tested for their ability to suppress bitterness: sucrose, a natural sweetener; aspartame, a noncaloric sweetener; sodium chloride (NaCl) as the electrolyte; phosphatidic acid, a commercial bitterness suppression agent; and tannic acid, a component of green tea. These substances were examined in a gustatory sensation test in human volunteers, a binding study, and using an artificial taste sensor. Sucrose, aspartame, and NaCl were effective in suppressing bitterness, although at comparatively high concentrations. An almost 80% inhibition of bitterness (calculated as concentration %) of a 0.1 mM quinine hydrochloride solution required 800 mM of sucrose, 8 mM of aspartame, and 300 mM NaCl. Similar levels of bitterness inhibition by phosphatidic acid and tannic acid (81.7, 61.0%, respectively) were obtained at much lower concentrations (1.0 (w/v)% for phosphatidic acid and 0.05 (w/v)% for tannic acid). The mechanism of the bitterness-depressing effect of phosphatidic acid and tannic acid was investigated in terms of adsorption and masking at the receptor site. With phosphatidic acid, 36.1% of the bitterness-depressing effect was found to be due to adsorption, while 45.6% was due to suppression at the receptor site. In the case of 0.05 (w/v)% tannic acid, the total bitterness-masking effect was 61.0%. The contribution of the adsorption effect was about 27.5% while the residual masking effect at the receptor site was almost 33%. Further addition of tannic acid (0.15 (w/v)%), however, increased the bitterness score of quinine, which probably represents an effect of the astringency of tannic acid itself. Finally, an artificial taste sensor was used to evaluate or predict the bitterness-depressing effect. The sensor output profile was shown to reflect the depressant effect at the receptor site rather well. Therefore, the taste sensor is potentially useful for predicting the effectiveness of bitterness-depressant substances.     

Culture conditions dictate protease and tannase production in submerged and solid-state cultures of Aspergillus niger Aa-20

Undesirable protease production by Aspergillus niger Aa-20 in submerged culture and solid-state culture was evaluated using different concentrations of tannic acid as sole carbon source in a model system designed for tannase production. Protease production was found to be dependent on the culture system used (submerged culture or solid-state culture) and on the initial tannic acid concentration. Expression of protease activity in submerged culture was higher (up to 10 times) than activity obtained in solid-state culture, using identical culture medium composition. In submerged culture, the lowest final protease activity (0.13 IU) was obtained with the highest tannic acid concentration, while in solid-state culture protease activity was not affected by changes in initial substrate concentration. Absence of detectable proteolytic activity in solid-state culture is related to high production of tannase enzyme. Hence, the use of solid-state culture for fungal enzyme production may allow for higher and more stable enzyme titers present in culture extracts.     

Antimicrobial and anti-biofilm activity of tannic acid against Staphylococcus aureus

Tannic acid, a rich of natural and process-derived phenolic compound, has been shown to be an effective antagonist against viruses and bacteria. In this study, we determined the antimicrobial activity and mechanisms of tannic acid against Staphylococcus aureus with emphasis on inhibiting effect on biofilm formation. Based on the results of time-kill assay, binding ability assay, lysozyme susceptibility assay and the transmission electron microscope, we tentatively speculated that peptidoglycan might be the target of the process that tannic acid destroy the integrity of cell wall, moreover, tannic acid could reduce the biofilm formation at sub-MIC concentrations. These results manifested that natural product tannic acid could serve as a potentially effective candidate for development of novel strategies to treat methicillin-resistant S. aureus infections.     

Straightforward preparation of organic colloidal particles by harnessing spontaneous non-covalent interactions of active molecules from natural origin

We demonstrate a straightforward method to prepare organic colloidal particles based on the spontaneous molecular interactions between small molecular weight actives of natural origin. Representative reactive natural actives from three of the most researched classes of phytochemicals including berberine (isoquinoline alkaloid), tannic acid (polyphenol) and glycyrrhizin (olenane type saponin) were chosen for the study. Binding parameters (association constant, binding enthalpy and entropy) obtained from isothermal titration calorimetry indicated that berberine strongly interacted with tannic acid to form insoluble colloidal complex which could be stabilised in the presence of glycyrrhizin (due to its interaction with both berberine and tannic acid and also due to its amphiphilic nature). Working on this principle, the mutual interactions of these three natural actives were exploited to obtain stable spherical particles with a mean diameter of less than 100 nm (77 nm) simply by mixing the aqueous solutions of berberine:tannic acid:glycyrrhizin at molar ratio of 2:1:1. The involvement of aromatic chromophore (π-π*) system and charged N atom of berberine in the spontaneous interaction between berberine and tannic acid was confirmed from spectral analysis. X-ray diffraction study suggested formation of amorphous organic colloidal particles, and the spherical shape of colloidal particles was confirmed by transmission electron microscopy.     

Chemically Amplified Resist Based on Dendritic Molecular Glass for Electron Beam Lithography

A novel dendritic molecular glass(MG) containing adamantane core(AD-15) was synthesized and characterized. It exhibits good solubility in common organic solvents and a stable amorphous state at room temperature, which contributes to forming films with different thicknesses by spin-coating. The thermal analysis of AD-15 indicates that no apparent glass transition temperature(T_g) is observed before the thermal decomposition temperature(T_d=160 ℃). The good thermal resistance suggests that it can satisfy the lithographic process and is a candidate for photoresist materials. The patterning properties of AD-15 resist were evaluated by electron beam lithography(EBL). By optimizing the lithographic process parameters, AD-15 resist can achieve 40 nm half-pitch patterns with a line-edge roughness of 4.0 nm. The contrast and sensitivity of AD-15 resist were 1.9 and 67 μC/cm², respectively. Compared with the commercial PMMA(950k) electron beam resist, the sensitivity of AD-15 resist increases by 6 times. This study provides a new example of molecular glass resist with high resolution and sensitivity for EBL.     

壳聚糖对鞣酸絮凝作用的研究

以壳聚糖为絮凝剂，采用絮凝法除去中药药液中的杂质。以鞣酸为研究对象，从鞣酸浓度，体系温度，ＰＨ絮凝剂用量粘均分子量等方面探讨其絮凝规律，用正交试验优化其絮凝条件，为实施中药药液的絮凝法精制工艺提供参考。     

The comparison of physic-chemical properties of chitosan/collagen/hyaluronic acid composites with nano-hydroxyapatite cross-linked by dialdehyde starch and tannic acid

Scaffolds based on chitosan, collagen and hyaluronic acid, cross-linked by dialdehyde starch with hydroxyapatite were obtained with the use of the freeze-drying method. Scaffolds were cross-linked by tannic acid or dialdehyde starch addition. Composites were characterized by different analyses, e.g. SEM images, porosity, density, liquid uptake, and mechanical tests. In addition, the adhesion and proliferation of human osteosarcoma SaOS-2 cells were examined on the obtained scaffolds.The results showed that the properties of the scaffolds based on chitosan, collagen, and hyaluronic acid can be modified by cross-linkers addition. The compressive modulus for the scaffolds cross-linked by dialdehyde starch was higher than for those cross-linked by tannic acid. The porosity of scaffolds cross-linked by starch was higher than those in which tannic acid was applied. However, the former presented lower density. SEM images showed the homogeneous scaffold structure with interconnected pores. Scaffolds cross-linked by tannic acid exhibited higher biocompatibility than those cross-linked by dialdehyde starch. However, the results showed that both scaffolds, cross-linked by dialdehyde starch and by tannic acid can provide the support required in tissue engineering and regenerative medicine. The scaffolds presented here may be easily operated to fit such small bone defects without causing adverse reactions.     

Use of p,p′-Phenolphthalein-bis(trimellitic) Dianhydride for Hardening Low Molecular Weight Epoxy Resins

Hardening of a low molecular epoxy resin with p,p′-phenol-phthalein-bis(trimellitic) dianhydride has been studied by using differential scanning calorimetry. The relationships of glass transition temperature of the systems being examined versus time, temperature of hardening, and dianhydride content in the compositions have been determined. The activation energy of crosslinking reactions in systems containing 50% of the stoichiometric amount of dianhydride has been evaluated. The value of activation energy obtained indicates a high reactivity of dianhydride in the examined reactions. The hardened epoxy composition exhibits excellent thermal stability, good hardness, and good resistance to acid solutions.

During research on soluble, regularly alternating polyesterimides, a synthesis of p,p′-phenolphthalein-bis(trimellitic) dianhydride was carried out and thus a new compound obtained [1]. The presence in the molecule of this new compound of four functional groups capable of reacting with epoxy groups and good solubility in organic solvents and low molecular epoxy resins suggested the use of this compound as a hardening agent for liquid resins. Examinations of the hardening process were conducted by using a low molecular epoxy resin (Beckopox 37–140) which is equivalent to Epidiane 5 and Epikotc 828.     

Tannase production by solid state fermentation of cashew apple bagasse

The ability of Aspergillus oryzae for the production of tannase by solid state fermentation was investigated using cashew apple bagasse (CAB) as substrate. The effect of initial water content was studied and maximum enzyme production was obtained when 60 mL of water was added to 100.0 g of CAB. The fungal strain was able to grow on CAB without any supplementation but a low enzyme activity was obtained, 0.576 U/g of dry substrate (g(ds)). Optimization of process parameters such as supplementation with tannic acid, phosphorous, and different organic and inorganic nitrogen sources was studied. The addition of tannic acid affected the enzyme production and maximum tannase activity (2.40 U/g(ds)) was obtained with 2.5% (w/w) supplementation. Supplementation with ammonium nitrate, peptone, and yeast extract exerted no influence on tannase production. Ammonium sulphate improved the enzyme production in 3.75-fold compared with control. Based on the experimental results, CAB is a promising substrate for solid state fermentation, enabling A. oryzae growth and the production of tannase, with a maximum activity of 3.42 U/g(ds) and enzyme productivity of 128.5x10(-3) U x g(ds)(-1) x h(-1).     

L-苏糖酸镁的制备及标准生成焓

以L-苏糖酸钙与草酸的复分解反应得到的L-苏糖酸溶液，在80 ℃下与过量MgO反应较长时间， 滤液浓缩后加无水乙醇制得L-苏糖酸镁白色粉末.用化学分析及元素分析确定其组成为Mg(C4H7O5)2•H2O. IR光谱分析表明,化合物中苏糖酸以羧基氧原子与Mg2＋配位，Mg2＋为sp3杂化态，配位数为4. TD－DTG结果说明，它在热分解中有一定稳定性，而经脱水和生成Mg(OAc)2，最后生成MgO.用转动弹热量计测得其恒容燃烧能ΔE为 (－10407.34±4.67) kJ•mol－1,计算其标准燃烧焓ΔcHm和标准生成焓ΔfHm分别为(－3 249.49±1.46) kJ•mol－1和(－2 786.23±1.84) kJ•mol－1.     

Synthesis of bio‐based internal and external cross‐linkers based on tannic acid for preparation of antibacterial superabsorbents

Recent researches focus on the synthesis of new cross‐linkers from natural resources. In the current work, functionalized tannic acid was employed as a replacement of petroleum‐based cross‐linkers because of its outstanding biochemical properties. Alkene‐ and epoxy‐functionalized tannic acids were synthesized as internal and external cross‐linkers, respectively. Cross‐linker structures were characterized with Ft‐IR and ¹HNMR analysis. Different amounts, as well as different numbers of alkene functional group, were incorporated during the superabsorbent synthesis. Moreover, the internal cross‐linked superabsorbent was surface cross‐linked with different amounts of epoxy‐functionalized tannic acid and increased the absorbency under load about 10 g g^?1. Free absorption properties in water and saline solution, absorbency under load, and rheological properties of superabsorbents were investigated. In addition, the antibacterial activity of the internal and external cross‐linked superabsorbent was studied against Escherichia coli and Staphylococcus aureus bacteria via different methods and compared with that of conventional superabsorbent.     

单宁酸/两性离子改性油-水分离膜的制备及性能

以不锈钢网为基材,利用单宁酸对不锈钢网进行表面预处理并功能化接枝两性离子基团,制备了新型亲水和水下超疏油的单宁酸/两性离子改性油-水分离膜(TA-ZW-SSM).利用X射线光电子能谱仪(XPS)、扫描电子显微镜(SEM)及接触角测量仪等表征了其化学结构、形态和润湿性.研究结果表明,两性离子基团通过化学键接枝在单宁酸预处理的不锈钢网表面.油-水分离实验结果表明,对于不同类型的油-水混合物,本文制备的超亲水和水下超疏油特性的TA-ZW-SSM可实现重力驱动的高效油-水分离,并具有较好的化学稳定性及再循环性.     

一种高感度深紫外正性化学增幅型抗蚀剂的制备

聚对羟基苯乙烯和环己基乙烯基醚反应得到缩醛保护的聚合物.该聚合物易溶于常见的有机溶剂,具有较好的热稳定性,在248 nm处透明性良好.该聚合物可与聚对羟基苯乙烯-甲基丙烯酸金刚烷基酯及二砜光产酸剂等组成一种三组分正性化学增幅型深紫外光致抗蚀剂,初步研究了该抗蚀剂的感光成像性能.采用KrF激光（248 nm）曝光,在较低的后烘温度下,显影得到分辨率为180 nm的线条图形.显影后的留膜率在99%以上.在光致抗蚀剂体系中引入对羟基苯乙烯-金刚烷基甲基丙烯酸酯共聚物,可提高光刻胶材料的玻璃化转变温度,有利于其实际应用.