Chitosan-g-mPEG-supported palladium (0) catalyst for Suzuki cross-coupling reaction in water

A chitosan-g-mTEG (methoxy triethylene glycol)- or mPEG (methoxy polyethylene glycol)-supported palladium (0) catalyst was prepared for the Suzuki cross-coupling reaction in water. The catalyst showed excellent catalytic activity in the Suzuki cross-coupling reaction without additional phase transfer reagents due to the enhanced solubility of the organic substrate by PEG grafting. In addition, the catalyst could be reused up to five times with the catalytic activity being recovered easily after simple manipulations.     

Multi-step polymer-assisted solution-phase (PASP) library synthesis of functionalized diaminobenzamides

A parallel solution-phase library synthesis of functionalized diaminobenzamides is described. The four-step library synthesis is accomplished using polymer-assisted solution-phase (PASP) synthesis techniques. This high-yielding, multi-step sequence utilizes sequestering resins for the removal of reactants, reactant by-products, and employs a resin capture/release strategy as a key library synthesis step. Step one of the sequence relies on the displacement of an activated fluoro-group from the aromatic ring of 1a, b with a variety of primary amines to introduce the first diversity position. Step two is hydrolysis of the benzoate ester to a benzoic acid which is subsequently captured on a polyamine resin, washed, and released to give 4a, b in pure form. Step three utilizes PASP resins to mediate the amide coupling of a benzoic acid with a variety of primary amines to give the aminonitrobenzamides 5a, b and introduces the second diversity position. Step four is the parallel reduction of the aminonitrobenzamides 5a, b to the functionalized diaminobenzamides 6a, b. This library synthesis proceeds with high overall purities which average 80 % over the 4-step sequence.     

Chitosan-supported palladium(0) catalyst for microwave-prompted Suzuki cross-coupling reaction in water

A chitosan-supported palladium (Pd) (0) catalyst was prepared by simple adsorption of palladium(II) ion onto chitosan beads and a subsequent reduction process. To maintain mechanical stability, the chitosan-supported palladium(0) catalyst was cross-linked with either glutaraldehyde or diglycidyl ether polyethylene glycol. The catalysts were utilized for the Suzuki cross-coupling reaction in water. The catalyst, in the presence of a tetrabutylammonium bromide (TBAB) additive, showed excellent catalytic activity in microwave-prompted Suzuki cross-coupling reactions using various aryl halides and boronic acids. In addition, the catalyst was successfully reused up to five times without significant loss of catalytic activity.     

Phosphine-free polystyrene-supported palladium(II) complex as an efficient catalyst for the Heck and Suzuki coupling reactions in water

A palladium complex, 1-phenyl-1,2-propanedione-2-oxime thiosemi-carbazone-functionalized polystyrene resin supported Pd(II), is found to be a highly active catalyst for the Heck reaction of methyl acrylate with aryl halides and Suzuki reaction of phenylboronic acid with aryl iodides and bromides, giving excellent yields. The reactions were performed under phosphine-free conditions in an air atmosphere. The palladium catalyst is easily separated, and can be reused for several times without a significant loss in its catalytic activity.     

Microwave-assisted Suzuki coupling reactions with an encapsulated palladium catalyst for batch and continuous-flow transformations

This article describes the design, optimisation and development of a Suzuki cross-coupling protocol mediated by an efficient palladium-encapsulated catalyst (Pd EnCat) under microwave irradiation. The methodology has been used in both batch mode for classical library preparation and in continuous-flow applications furnishing multigram quantities of material. Described is a method that uses direct focused microwave heating whilst applying an external cooling source. This enables a lower than normal bulk temperature to be maintained throughout the reaction period leading to significant improvements in the overall yield and purity of the reaction products. Additional aspects of this novel heating protocol are discussed in relation to the prolonged lifetime and enhanced reactivity of the immobilised catalyst system.     

Heterogeneous Suzuki and Stille coupling reactions using highly efficient palladium(0) immobilized MCM-41 catalyst

An efficient palladium(0) immobilized MCM-41 catalytic system for C-C cross-coupling reaction has been developed. Ligand-free Pd(0)-MCM-41 catalyst can be successfully used in coupling reaction between various aryl halides including deactivated chlorobenzene with aryl borane and organotin to give biaryls in excellent yields with high turnover frequency (TOF) (the maximal TOFs are up to 6990 for the reaction of bromobenzene with phenylboronic acid). The catalyst can be recycled and reused without any loss of catalytic activity.     

A novel fluorous palladium catalyst for Suzuki reaction in fluorous media

Palladium(II) perfluorooctanesulfonate [Pd(OSO₂R_f8)₂] catalyses the highly efficient Suzuki reaction in the presence of a catalytic amount of perfluoroalkylated-pyridine as a ligand in a fluorous biphase system (FBS). The fluorous phase containing the active palladium species is easily separated and can be reused several times without a significant loss of catalytic activity.     

A highly efficient memantine-modified palladium catalyst for Suzuki–Miyaura cross-coupling reaction

A new simple Pd(memantine)₂Cl₂ complex was synthesized and characterized by ¹H NMR, ¹³C NMR and X-ray single crystal structure determination. The Suzuki–Miyaura reaction of aryl bromides catalyzed by Pd(memantine)₂Cl₂ complex was investigated in air with different temperature. The high turnover numbers of 650,000 have been obtained in the reaction of 4-bromonitrobenzene with phenylboronic acid at 80 °C. At room temperature, the complex also showed high activity for Suzuki–Miyaura cross-coupling reaction of aryl bromides with a wide range of functional groups under air, and the turnover number of up to 99,000 was achieved. The catalytic system also gives good yields toward the reaction of several heteroaryl bromides with thiophenylboronic acid.     

Efficient and ligand free palladium catalyst for Suzuki and Heck cross-coupling reactions

A simple and efficient system for Suzuki cross-coupling reactions was developed using a ligandless catalyst of Pd nanoclusters generated in situ from Pd(acac)₂. The cross-coupling reactions proceeded under mild reaction conditions with a high reaction rate (5 min) to give various biaryls in high yields. The system also exhibited catalytic potential for Heck reaction between aryl bromides and styrene.     

A simple catalyst for aqueous phase Suzuki reactions based on palladium nanoparticles immobilized on an ionic polymer

Palladium nanoparticles immobilized on a cross-linked imidazolium-containing polymer were evaluated as a catalyst for Suzuki carbon-carbon cross-coupling reactions using water as the solvent. The nanocatalysts show good catalytic activities for aryl iodides and aryl bromides and moderate activity with aryl chloride substrates. Coupling of sterically hindered substrates could also be achieved in reasonable yields. The heterogeneous catalyst is stable, can be stored without precautions to exclude air or moisture, and can be easily recycled and reused.     

Green synthesis of supported palladium nanoparticles employing pine needles as reducing agent and carrier: New reusable heterogeneous catalyst in the Suzuki coupling reaction

A green method for the synthesis of supported Pd nanoparticles (NPs) using pine needle extract as the reducing agent and the extracted residue of pine needle (RPN) as the carrier is described. The Pd/RPN nanocomposites were characterized using Fourier transform infrared, UV–visible, inductively coupled plasma atomic emission and X‐ray photoelectron spectroscopies, transmission electron microscopy and X‐ray diffraction. The spherical Pd NPs had a mean particle size of 3.25 nm and were evenly distributed on the RPN surface. More importantly, the Pd/RPN nanocomposite, as a heterogeneous catalyst, presented superior catalytic activity for the Suzuki coupling reaction. The yield of the reaction of 4‐bromotoluene with phenylboronic acid catalyzed by Pd_0.03/RPN reached 98% with low Pd loading (0.1 mmol%) at room temperature for 30 min. In addition, the catalyst could be easily separated by centrifugation and reused at least six times without significant loss of activity.     

羽毛角蛋白稳定的钯纳米颗粒催化Suzuki偶联反应

采在温和条件下羽毛角蛋白负载的Pd纳米颗粒可高效催化水中溴代芳烃与苯硼酸的偶联反应,且具有官能团的广泛适用性,生成的联苯类化合物可在反应液中沉淀出来,具有很好的产率和纯度.催化剂通过简单过滤可重复使用7次.     

Silica‐supported terpyridine palladium(II) complex as an efficient and reusable catalyst for Heck and Suzuki cross‐coupling reactions

Silica‐supported terpyridine palladium(II) was prepared and used as an effective and recyclable catalyst in Mizoroki–Heck and Suzuki–Miyaura coupling reactions. The catalyst was very effective for the Mizoroki–Heck reaction of aryl halides with olefins and conversion was in most cases excellent. The catalyst showed good thermal stability (up to 230 °C) and could be recovered and reused for four reaction cycles. The Suzuki coupling of aryl iodides with aryl boronic acids in the presence of the catalyst was also investigated and the reaction proceeded with a short reaction time and excellent conversion. Copyright © 2013 John Wiley & Sons, Ltd.     

Electrochemical olefin epoxidation employing an iron(IV)porphyrin/trisbipyridineruthenium(III) polymer catalyst

A porphyrin molecule containing four meso-appended 2,2'-bipyridyl ligands has been prepared. Each bipyridine is attached to the porphyrin core at the 4-position (pseudo-para to one of the pyridine nitrogens). Subsequently, each of the four bipyridines was complexed with a RuL2(2+) moiety and iron coordinated in the porphyrin core. When L = 4-vinyl-4'-methyl-2,2'-bipyridine, reduction of the ruthenium centers resulted in the formation of robust electroactive polymer films which deposited on the electrode surface. In the presence of aqueous acid, these films electrocatalytically epoxidize cyclohexene at positive potentials from the formal iron(IV) oxidation state. Although product analysis has only been conducted for cyclohexene, the catalytic activity extends to a large variety of olefins including ethylene and propylene.     

Rapid room temperature Buchwald-Hartwig and Suzuki-Miyaura couplings of heteroaromatic compounds employing low catalyst loadings

The use of second-generation [(NHC)Pd(R-allyl)Cl] complexes for Suzuki-Miyaura and Buchwald-Hartwig cross-coupling reactions involving heteroaromatic halides at room temperature is reported. The first examples of room temperature Suzuki-Miyaura cross-coupling of deactivated aryl chlorides with alkenyl boronic acids are also disclosed. Terminal substitution at the allyl moiety of the palladium complex facilitates its activation at room temperature leading to very active catalytic species enabling the present catalytic transformations to be performed rapidly using very mild reaction conditions. Catalyst loadings can be as low as 10 ppm for the Buchwald-Hartwig aryl amination and 50 ppm for the Suzuki-Miyaura reaction.     

Recyclable and highly active cationic 2,2′-bipyridyl palladium(II) catalyst for Suzuki cross-coupling reaction in water

A water-soluble and air-stable palladium(II)/cationic 2,2′-bipyridyl catalyst is proven to be a recyclable and extremely active catalyst for Suzuki reaction in aqueous and aerobic conditions. The conveniently prepared catalyst showed little loss in the catalytic process of the coupling between 4-bromoacetophenone and phenylboronic acid after five cycles. For the reactions of aryl chlorides, biaryls were formed in high yields under refluxing temperature in the presence of TBAB.     

Biphasic Suzuki coupling reactions of aryl or benzyl bromides employing cobalt-containing phosphine ligand coordinated palladium complex

Biphasic Suzuki-coupling reactions of aryl and benzyl bromides employing a cobalt-containing phosphine ligand chelated palladium complex 2 were carried out in various reaction conditions. Comparisons of the catalytic efficiencies in the presence/absence of a phase-transfer agent, TBAB, were presented. In addition, the effects of altering solvents, temperatures, catalysts, and substrates on the reactions were monitored and reported. Better yields were commonly observed while a phase-transfer agent TBAB was participated in the reactions. The factor of reaction time is more crucial than that of temperature in short reaction hour experiments. Obviously, an induction period for the reduction of Pd(II) to Pd(0) active species is needed for this type of reaction.     

Polymethyl methacrylate micro-spheres supported palladium: A new catalyst for Heck and Suzuki reactions

Polymethyl methacrylate (PMMA) micro-spheres, a kind of commercially available polymeric material was treated with PdCl₂ and formaldehyde giving a reagent with a palladium loading of 0.79 (wt.%). The Pd-PMMA catalyzed the highly efficient Heck and Suzuki reactions. The reactions can be performed under ligand-free conditions in an air atmosphere. The palladium catalyst is easily separated and can be reusable with negligible leaching of palladium.     

Factorial design evaluation of the Suzuki cross-coupling reaction using a magnetically recoverable palladium catalyst

A magnetically recoverable catalyst [Fe₃O₄@SiO₂-AEAPTMS-Pd(II)] was prepared, fully characterized and had its catalytic activity evaluated on the Suzuki cross-coupling reaction under microwave irradiation. The reaction conditions for the synthesis of biaryl compounds was optimized in two stages - an initial fractional design 2⁴, in which the parameters reaction time, temperature, solvent and catalyst loading were evaluated, followed by a Doehlert design. The factorial design proved to be a viable approach for obtaining the optimal reaction conditions based on a relatively small number of experiments. Additionally, the biaryl derivatives synthesized by this method were obtained with good to excellent yields (71–96%) and the recovery and reuse of the palladium catalyst was also evaluated.