A general synthetic strategy for oxide-supported metal nanoparticle catalysts

Despite recent exciting progress in catalysis by supported gold nanoparticles, there remains the formidable challenge of preparing supported gold catalysts that collectively incorporate precise control over factors such as size and size-distribution of the gold nanoparticles, homogeneous dispersion of the particles on the support, and the ability to utilize a wide range of supports that profoundly affect catalytic performance. Here, we describe a synthetic methodology that achieves these goals. In this strategy, weak interface interactions evenly deposit presynthesized organic-capped metal nanoparticles on oxide supports. The homogeneous dispersion of nanoparticles on oxides is then locked in place, without aggregation, through careful calcination. The approach takes advantage of recent advances in the synthesis of metal and oxide nanomaterials and helps to bring together these two classes of materials for catalysis applications. An important feature is that the strategy allows metal nanoparticles to be well dispersed on a variety of oxides with few restrictions on their physical and chemical properties. Following this synthetic procedure, we have successfully developed efficient gold catalysts for green chemistry processes, such as the production of ethyl acetate from the selective oxidation of ethanol by oxygen at 100 degrees C.     

Synthesis of monofunctionalized gold nanoparticles by fmoc solid-phase reactions

In this communication, solid-phase reactions for the synthesis of Lys-monofunctionalized gold nanoparticles are described. A controlled and selective fabrication of linear nanoparticle arrays can be achieved through peptide linkage systems, and therefore it is essential to prepare Fmoc amino acid nanoparticle building blocks susceptible to Fmoc solid-phase peptide synthesis. Gold nanoparticles containing carboxylic acids (2) in the organic shell were covalently ligated to Lys on solid supports through amide bond coupling reactions. We employed Fmoc-Lys-substituted polymer resins such as Fmoc-Lys-Wang or Fmoc-Lys-HMPA-PEGA. The low density of Lys on the matrix enabled 2 nm-sized gold nanoparticles to react with Lys in a 1:1 ratio. Subsequent cleavage reactions using 60% TFA reagent resulted in Lys transfer from the solid matrix to gold nanoparticles, and the Fmoc-Lys-monofunctionalized gold nanoparticles (5) were obtained with 3-15% yield. Synthesis using HMPA-PEGA resin increased productivity due to the superior swelling properties of PEGA resin in DMF. Monofunctionalization of nanoparticles was microscopically characterized using TEM for the ethylenediamine-bridged nanoparticle dimers (6). By counting the number of 6, we found that at least 60% of cleaved nanoparticles were monofunctionalized by Lys. This method is highly selective and efficient for the preparation of monofunctionalized nanoparticles.     

Catalytic properties of supported gold nanoparticles in organic syntheses

Gold nanoparticles exhibit unique properties due to their ability to form aggregates of atoms of diverse morphology shapes and sizes of which depend, to a considerable extent, on specific features of the nearest environment. The nature of gold nanoparticles varies in a wide range: from the particles with pronounced Lewis acidic properties to the negatively charged particles bearing a formal zero-valence charge. The most examples of new reactions catalyzed by gold nanoparticles include unsaturated compounds and strong nucleophiles (such as amines) as substrates. This short review provides a digest of the catalytic properties of gold nanoparticles. The main attention is paid to the possible role of certain forms of the metal in catalytic reactions. Of special interest are reactions in which effects of synergism of gold and other active species or second metals present in the catalyst are revealed or a size effect is established.     

Surface chemistry of gold nanoparticles for health-related applications

Functionalization of gold nanoparticles is crucial for the effective utilization of these materials in health-related applications. Health-related applications of gold nanoparticles rely on the physical and chemical reactions between molecules and gold nanoparticles. Surface chemistry can precisely control and tailor the surface properties of gold nanoparticles to meet the needs of applications. Gold nanoparticles have unique physical and chemical properties, and have been used in a broad range of applications from prophylaxis to diagnosis and treatment. The surface chemistry of gold nanoparticles plays a crucial role in all of these applications. This minireview summarizes these applications from the perspective of surface chemistry and explores how surface chemistry improves and imparts new properties to gold nanoparticles for these applications.

Functionalization of gold nanoparticles is crucial for the effective utilization of these materials in health-related applications.     

Microwave-induced synthesis of highly dispersed gold nanoparticles within the pore channels of mesoporous silica

Highly dispersed gold nanoparticles have been incorporated into the pore channels of SBA-15 mesoporous silica through a newly developed strategy assisted by microwave radiation (MR). The sizes of gold are effectively controlled attributed to the rapid and homogeneous nucleation, simultaneous propagation and termination of gold precursor by MR. Diol moieties with high dielectric and dielectric loss constants, and hence a high microwave activation, were firstly introduced to the pore channels of SBA-15 by a simple addition reaction between amino group and glycidiol and subsequently served as the reduction centers for gold nanoparticles. Extraction of the entrapped gold from the nanocomposite resulted in milligram quantities of gold nanoparticles with low dispersity. The successful assembly process of diol groups and formation of gold nanoparticles were monitored and tracked by solid-state NMR and UV-vis measurements. Characterization by small angle X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicated that the incorporation of gold nanoparticles would not breakup the structural integrity and long-range periodicity of SBA-15. The gold nanoparticles had a narrow size distribution with diameters in the size range of 5-10 nm through TEM observation. The average particles size is 7.9 nm via calculation by the Scherrer formula and TEM measurements. Nitrogen adsorption and desorption isotherms gave further evidence that the employed method was efficient and gold nanoparticles were successfully incorporated into the pore channels of SBA-15.     

Recent Progress of Synthesis and Application in Au@MOFs Hybrid Materials

The combination of gold nanoparticles and metal–organic frameworks is one of the new directions of current research. It has applications in many aspects, especially as a catalyst for a variety of reactions. Therefore, this paper describes recent progress of synthesis and application in Au@MOFs hybrid materials.     

聚酰胺酸盐稳定的金纳米催化剂用于羧酸的绿色合成

使用一锅法成功制备了水溶性聚酰胺酸盐稳定的金纳米催化剂(AuNPs-PAAS),将该催化剂用于伯醇的催化氧化.利用紫外-可见分光光度计,X射线衍射仪(XRD),透射电子显微镜(TEM)等表征方法对催化剂进行了表征.结果表明,金纳米粒子在聚酰胺酸溶液中处于均匀分散状态,金纳米尺寸约为5 nm.将制备的纳米金催化剂用于伯醇的氧化,评价了其在伯醇氧化成羧酸反应中的催化性能,结果显示,在空气为氧化剂,水为溶剂的条件下,AuNPs-PAAS对伯醇的催化氧化为高效的准均相催化过程,高选择性得到羧酸产物,通过调节溶液的pH值,可以很容易的实现产物与反应体系分离和催化剂的回收和循环利用.     

Nanocrystalline gold and gold palladium alloy catalysts for chemical synthesis

Catalysis by gold has become one of the most studied new topics in chemistry in recent years, and yet for many gold acting as a catalyst is, perhaps, a most unlikely possibility since bulk gold is a relatively non-reactive, immutable, ductile metal that is prized for its great beauty and value rather than for the depth of its chemistry. However, when prepared in nanocrystalline form, as a collection of a few hundreds of atoms, it displays remarkable activity as a heterogeneous catalyst for a broad range of redox reactions. Of particular note is the ability of gold, either alone or alloyed with palladium, to catalyse selective oxidation reactions, e.g. alkene epoxidation, alcohol oxidation, and the direct synthesis of hydrogen peroxide by the hydrogenation of molecular oxygen. In this article the recent advances in this exciting new field are explored.     

Two-dimensional self-organization of polystyrene-capped gold nanoparticles

Thiol end-functionalized polystyrene chains have been introduced onto the surface of gold nanoparticles via a two-step grafting-to method. This simple grafting procedure is demonstrated to be efficient for gold nanoparticles of different sizes and for particles initially dispersed in either aqueous or organic media. The method has been applied successfully for a relatively large range of polystyrene chain lengths. Grafting densities, as determined by thermogravimetric analysis, are found to decrease with increasing chain length. In all cases, the grafting density indicates a dense brush conformation for the tethered chains. The resulting functionalized nanoparticles self-organize into hexagonally ordered monolayers when cast onto solid substrates from chloroform solution. Furthermore, the distance between the gold cores in the dried monolayer is controlled by the molecular weight of the grafted polystyrene. Optical absorption spectra recorded for the organized monolayers show the characteristic plasmon absorption of the gold particles. Importantly, the plasmon resonance frequency exhibits a distinct dependence on interparticle separation that can be attributed to plasmon coupling between neighboring gold cores.     

Plasmonic Nanobiosensor with Chain Reaction Amplification Mechanism

Herein we demonstrate a plasmonic nanobiosensor that explores chain reaction amplification mechanisms to transduce chemical signals released in biocatalytic reactions, turning optical signals into a visual spectral range. The sensor has a very simple design: gold nanoparticles resting in the surface of a grafted P2VP film. Changes in the gold nanoparticles’ position causes changes in the plasmon coupling mode. This is detected by means of a maximum absorbance shift.     

Supported gold nanoparticles as catalysts for organic reactions

This critical review is intended to attract the interest of organic chemists and researchers on green and sustainable chemistry on the catalytic activity of supported gold nanoparticles in organic transformations. In the general part of this critical review, emphasis is given to the different procedures to form supported gold nanoparticles and to the importance of the support cooperating in the catalysis. Also the convergence of homogeneous and heterogeneous catalysis in the study of gold nanoparticles has been discussed. The core part of this review is constituted by sections in which the reactions catalyzed by supported gold nanoparticles are described. Special emphasis is made on the unique ability of gold catalysts to promote additions to multiple C-C bonds, benzannulations and alcohol oxidation by oxygen (282 references).     

Transmetalation reaction between hydrophobic silver nanoparticles and aqueous chloroaurate ions at the air-water interface

The transmetalation reaction between a sacrificial nanoparticle and more noble metal ions in solution has emerged as a novel method for creating unique hollow and bimetallic nanostructures. In this report, we investigate the possibility of carrying out the transmetalation reaction between hydrophobic silver nanoparticles assembled and constrained at the air-water interface and subphase gold ions. We observe that facile reduction of the subphase gold ions by the sacrificial silver nanoparticles occurs resulting in the formation of elongated gold nanostructures that appear to cross-link the sacrificial silver particles. This transmetalation reaction may be modulated by the insertion of an electrostatic barrier in the form of an ionizable lipid monolayer between the silver nanoparticles and the aqueous gold ions that impacts the gold nanoparticle assembly. Transmetalation reactions between nanoparticles constrained into a close-packed structure and appropriate metal ions could lead to a new strategy for metallic cross-linking of nanoparticles and generation of coatings with promising optoelectonic behavior.     

Photochemical and analytical applications of gold nanoparticles and nanorods utilizing surface plasmon resonance

In recent years, plasmonics has emerged as a promising tool in the fields of analytical chemistry and biochemistry. In particular, surface plasmon resonance at the surfaces of gold nanostructures has led to the development of widespread interest in gold nanoparticles. In this review, we describe some of the recent progress in the manufacture and use of gold nanoparticles, with particular emphasis on gold nanorods. Furthermore, the spectroscopic and photochemical applications of gold nanospheres and nanorods are described.     

Fabrication and Characterization of Iron (II,III) on Positively Charged Gold Nanoparticles with Application for Magnetically Recoverable Catalysis

An aqueous dispersion was prepared by attaching positively charged gold nanoparticles to the surface of poly-sodium-p-styrenesulfonate-modified Fe₃O₄ nanoparticles. The Fe₃O₄@positively charged gold nanoparticles offer high monodispersion, stability against aggregation, and high magnetization with uniform size. The Fe₃O₄@positively charged gold nanoparticles were efficient and recyclable catalysts due to the formation of a positively charged gold layer on the surface of Fe₃O₄ nanoparticles and were stable in aqueous solution for over forty-eight hours and hence may have a broad range of applications.     

Comparison study of the solution phase versus solid phase place exchange reactions in the controlled functionalization of gold nanoparticles

Gold nanoparticles offer tremendous potential in the areas of nanoelectronics, bio- and chemosensors, and catalysis. However, before these applications are realized, the surface functionality of nanoparticles must be better controlled. Our lab has recently reported a novel synthetic approach for making monofunctionalized nanoparticles through a solid phase place exchange reaction. Monofunctionalized gold nanoparticles may also be prepared through a solution phase place exchange reaction. In this study, we compared the efficiency of these two separate approaches toward controlled functionalization of gold nanoparticles by (1)H NMR, Fourier transform infrared (FT-IR), and transmission electron microscopy (TEM) analysis. We found that the solid phase place exchange approach is much more efficient at producing monofunctionalized gold nanoparticles. (1)H NMR data were used to give a semiquantitative count of substituted bifunctional ligands, and FT-IR spectra supported these findings. Furthermore, we used a diamine coupling reaction of nanoparticles to show the presence of single or multiple functional groups on the nanoparticle surface by TEM analysis.     

In Situ Formation of Gold Nanoparticles within a Polymer Particle and Their Catalytic Activities in Various Chemical Reactions

Composite materials consisting of nanoscale gold particles and protective polymer shells were designed and tested as catalysts in various chemical reactions. Initially, the systematic incorporation of multiple gold nanoparticles into a poly(N-isopropylacrylamide) particle was achieved by an in situ method under light irradiation. The degree of gold nanoparticle loading, along with the structural and morphological properties, was examined as a function of the amount of initial gold ions and reducing agent. As these gold nanoparticles were physically-embedded within the polymer particle in the absence of strong interfacial interactions between the gold nanoparticles and polymer matrix, the readily-accessible surface of the gold nanoparticles with a highly increased stability allowed for their use as recyclable catalysts in oxidation, reduction, and coupling reactions. Overall, the ability to integrate catalytically-active metal nanoparticles within polymer particles in situ allows for designing novel composite materials for multi-purpose catalytic systems.     

Comparison of the Peroxidase‐Like Activity of Unmodified,Amino‐Modified,and Citrate‐Capped Gold Nanoparticles

The origin of the peroxidase‐like activity of gold nanoparticles and the impact of surface modification are studied. Furthermore, some influencing factors, such as fabrication process, redox property of the modifier, and charge property of the substrate, are investigated. Compared to amino‐modified or citrate‐capped gold nanoparticles, unmodified gold nanoparticles show significantly higher catalytic activity toward peroxidase substrates, that is, the superficial gold atoms are a contributing factor to the observed peroxidase‐like activity. The different catalytic activities of amino‐modified and citrate‐capped gold nanoparticles toward 3,3′,5,5′‐tetramethylbenzidine (TMB) and 2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulfonic acid) diammonium salt (ABTS) show that the charge characteristics of the nanoparticles and the substrate also play an important role in the catalytic reactions.     

Self-assembled multilayer of gold nanoparticles for amplified electrochemical detection of cytochrome c

Although different kinds of film materials and some modification techniques are applied for the development of protein-film electrochemistry, the design of a more ordered adsorption platform with improved sensitivity is still required. Here we employ single-strand DNA (ssDNA)-functionalized gold nanoparticles as scaffolds for the construction of a multilayered uniform self-assembled structure via the hybridization of complementary ssDNA. After adsorbing with native conformation onto the uniformly built electrode, cytochrome c responded very well in voltammetry experiments. The peak currents increase with the addition of the number of gold nanoparticle layers, which indicates that the multilayer gold nanoparticles not only provide a compatible microenvironment for the protein to undergo direct electron transfer reactions but also amplify the electrochemical signals by increasing the binding sites for the protein immobilization. Furthermore, ultra-sensitive detection of cytochrome c by using this multilayer gold nanoparticle-modified electrode is carried out. The linear range is from 2 x 10(-9) to 1 x 10(-7) M with a detection limit of 6.7 x 10(-10) M.     

Carbon Nanotube and Gold‐Based Materials: A Symbiosis

Carbon nanotubes constitute a novel class of nanomaterials with potential applications in many areas. The attachment of metal nanoparticles to carbon nanotubes is new way to obtain novel hybrid materials with interesting properties for various applications such as catalysts and gas sensors as well as electronic and magnetic devices. Their unique properties such as excellent electronic properties, a good chemical stability, and a large surface area make carbon nanotubes very useful as a support for gold nanoparticles in many potential applications, ranging from advanced catalytic systems through very sensitive electrochemical sensors and biosensors to highly efficient fuel cells. Here we give an overview on the recent progress in this area by exploring the various synthesis approaches and types of assemblies, in which nanotubes can be decorated with gold nanoparticles and explore the diverse applications of the resulting composites.     

An approach for the surface functionalized gold nanoparticles with pH-responsive polymer by combination of RAFT and click chemistry

In this report, we demonstrated a novel efficient post-modification route for preparation of smart hybrid gold nanoparticles with poly(4-vinylpyridine) (P4VP) based on RAFT and click chemistry. A new azide terminated ligand was first synthesized to modify gold nanoparticles by ligand exchange reaction, and then click reaction was used to graft alkyne terminated P4VP which was prepared by RAFT onto the surface of gold nanoparticles. The functionalized hybrid gold nanoparticles were characterized by TEM, FTIR, and XPS etc. The results indicated that the P4VP was successfully grafted onto the surface of gold nanoparticles by click reaction. The surface grafting density was calculated to be about 6 chains/nm²_. In addition, the hybrid gold nanoparticles showed a pH responsive phenomenon as the pH value changed around 5.