Simultaneous determination of mercapturic acids derived from ethylene oxide (HEMA), propylene oxide (2-HPMA), acrolein (3-HPMA), acrylamide (AAMA) and N,N-dimethylformamide (AMCC) in human urine using liquid chromatography/tandem mass spectrometry

Mercapturic acids are highly important and specific biomarkers of exposure to carcinogenic substances in occupational and environmental medicine. We have developed and validated a reliable, specific and very sensitive method for the simultaneous determination of five mercapturic acids derived from several high-production chemicals used in industry, namely ethylene oxide, propylene oxide, acrylamide, acrolein and N,N-dimethylformamide. Analytes are enriched and cleaned up from urinary matrix by offline solid-phase extraction. The mercapturic acids are subsequently separated by means of high-performance liquid chromatography on a Luna C8 (2) column and specifically quantified by tandem mass spectrometric detection using isotopically labelled analytes as internal standards. The limits of detection (LODs) for N-acetyl-S-2-carbamoylethylcysteine (AAMA) and N-acetyl-S-2-hydroxyethylcysteine (HEMA) were 2.5 microg/L and 0.5 microg/L urine, while for N-acetyl-S-3-hydroxypropylcysteine (3-HPMA), N-acetyl-S-2-hydroxypropylcysteine (2-HPMA) and N-acetyl-S-(N-methylcarbamoyl)cysteine (AMCC) it was 5 microg/L. These LODs were sufficient to detect the background exposure of the general population. We applied the method on spot urine samples of 28 subjects of the general population with no known occupational exposure to these substances. Median levels for AAMA, HEMA, 3-HPMA, 2-HPMA and AMCC in non-smokers (n = 14) were 52.6, 2.0, 155, 7.1 and 113.6 microg/L, respectively. In smokers (n = 14), median levels for AAMA, HEMA, 3-HPMA, 2-HPMA and AMCC were 243, 5.3, 1681, 41.7 and 822 microg/L, respectively. Due to the simultaneous quantification of these mercapturic acids, our method is well suited for the screening of workers with multiple chemical exposures as well as the determination of the background excretion of the general population.     

Highly sensitive routine method for urinary 3-hydroxybenzo[a]pyrene quantitation using liquid chromatography-fluorescence detection and automated off-line solid phase extraction

Many workers and also the general population are exposed to polycyclic aromatic hydrocarbons (PAHs), and benzo[a]pyrene (BaP) was recently classified as carcinogenic for humans (group 1) by the International Agency for Research on Cancer. Biomonitoring of PAHs exposure is usually performed by urinary 1-hydroxypyrene (1-OHP) analysis. 1-OHP is a metabolite of pyrene, a non-carcinogenic PAH. In this work, we developed a very simple but highly sensitive analytical method of quantifying one urinary metabolite of BaP, 3-hydroxybenzo[a]pyrene (3-OHBaP), to evaluate carcinogenic PAHs exposure. After hydrolysis of 10 mL urine for two hours and concentration by automated off-line solid phase extraction, the sample was injected in a column-switching high-performance liquid chromatography fluorescence detection system. The limit of quantification was 0.2 pmol L(-1) (0.05 ng L(-1)) and the limit of detection was estimated at 0.07 pmol L(-1) (0.02 ng L(-1)). Linearity was established for 3-OHBaP concentrations ranging from 0.4 to 74.5 pmol L(-1) (0.1 to 20 ng L(-1)). Relative within-day standard deviation was less than 3% and relative between-day standard deviation was less than 4%. In non-occupationally exposed subjects, median concentrations for smokers compared with non-smokers were 3.5 times higher for 1-OHP (p<0.001) and 2 times higher for 3-OHBaP (p<0.05). The two urinary biomarkers were correlated in smokers (ρ=0.636; p<0.05; n=10) but not in non-smokers (ρ=0.09; p>0.05; n=21).     

Determination of urinary S-phenylmercapturic acid, a specific metabolite of benzene, by liquid chromatography/single quadrupole mass spectrometry

A high-performance liquid chromatography/single quadrupole mass spectrometry (LC/MS) method is described for the determination of urinary S-phenylmercapturic acid (S-PMA), a specific metabolite of benzene. Urine samples were spiked with [13C6]S-PMA (used as the internal standard) and acidified; then they were purified by solid-phase extraction (SPE) on C18 cartridges. Analyses were conducted on a reversed-phase column by gradient runs with 1% aqueous acetic acid/methanol mixtures at different proportions as the mobile phase. The detector was used in electrospray negative ion mode (ESI-), the ions m/z 238 for S-PMA and 244 for [13C6]S-PMA being recorded simultaneously. The detection limit (for a signal-to-noise ratio = 3) was 0.2 microg/L, thus allowing for the measurement of background excretion of S-PMA in the general population. The use of the internal standard allowed us to obtain good precision (CV% values < 3%) and a linear calibration curve within the range of interest for monitoring occupational exposure to benzene (up to 500 microg/L). The method was applied to assay the metabolite concentration in a group of 299 workers (68 smokers and 231 non-smokers) occupationally exposed to relatively low levels of benzene (environmental concentration = 0.4-220 microg/m3, mean 11.4 microg/m3 and 236 non-exposed subjects (134 smokers and 102 non-smokers). The results clearly showed that smoking must be taken into account for the correct interpretation of the results of S-PMA measurements for the assessment of work-related benzene exposure. When only non-smokers were selected, the mean excretion of S-PMA was significantly higher in workers exposed to benzene (1.2 +/- 0.9 microg/g creatinine) than in the control group (0.7 +/- 0.6 microg/g creatinine) (p < 0.001), thus confirming the role of S-PMA as a biomarker of benzene on a group basis, even for relatively low exposure degrees.     

Determination of dichloroanilines in human urine by gas chromatography/mass spectrometry: validation protocol and establishment of Reference Values in a population group living in central Italy

3,4- and 3,5-Dichloroanilines (DCAs) are common markers of some non-persistent pesticides, e.g. linuron, diuron, vinclozolin, and iprodione. The general population may be exposed to these DCAs and/or their precursors mainly through diet. Since adverse effects on human health, such as endocrine disruption, have been reported, biological monitoring is essential for exposure assessment both of occupationally exposed subjects and of the general population. A highly sensitive and selective gas chromatography/mass spectrometry (GC/MS) method has been developed for the determination of 3,4- and 3,5-DCAs in urine using 4-chloro-2-methylaniline as an internal standard. The selected ion monitoring (SIM) mode was employed for quantitation of the analytes. The sample treatment procedure is simple and fast and no derivatization is required. The overall method was validated including uncertainty measurement. The limit of detection (LOD) and the lower limit of quantitation (LLOQ) were determined to be 0.005 and 0.010 microg/L for both analytes. The method was then applied to the establishment of reference values for a population group living in a rural area of central Italy (Novafeltria, Marche). A total of 151 out of 153 samples were found to be positive for 3,5-DCA, and 81.7% were positive for 3,4-DCA. For this group, 3,4-DCA levels ranged from 0.01 to 6.19 microg/L, while 3,5-DCA urinary concentrations were between 0.02 and 6.71 microg/L.     

Assay of urinary alpha-fluoro-beta-alanine by gas chromatography-mass spectrometry for the biological monitoring of occupational exposure to 5-fluorouracil in oncology nurses and pharmacy technicians

The validation of an analytical method for the measurement of the unnatural amino acid alpha-fluoro-beta-alanine (AFBA), the main metabolite of the antineoplastic drug 5-fluorouracil (5FU), in urine for the biological monitoring of the exposure of hospital workers to the drug when preparing the therapeutical doses and administering to cancer patients is described. The method employed a two-step extractive derivatization of the analyte from urine to the N-trifluoroacety-n-butyl ester derivative and detection by selected-ion monitoring gas chromatography-mass spectrometry of structurally specific fragments. The limit of detection was 20 ng/mL with quantification accuracy better than +/-20% and precision (CV%) better than +/-20% in the range 0.020-10 microg/mL. Norleucine was used as the internal standard and the sample-to-sample analysis time was less than 15 min. The validated method has been applied to the biological monitoring of some hospital workers potentially exposed to 5FU and to matched control subjects. On a total number of 65 analyzed urine samples from control and exposed subjects, only three, obtained from exposed subjects, were found to be positive, with values of 20, 30 and 1150 ng/mL, respectively.     

Exposure to 2,4- and 2,6-toluene diisocyanate (TDI) during production of flexible foam: determination of airborne TDI and urinary 2,4- and 2,6-toluenediamine (TDA)

Occupational exposure to 2,4- and 2,6-toluene diisocyanate (2,4- and 2,6-TDI) was measured during the production of flexible foam. The usefulness of urinalysis of the TDI-derived amines, 2,4- and 2,6-toluenediamine (2,4- and 2,6-TDA), for exposure assessment was compared with air monitoring. Urine samples were collected from 17 employees at two plants. The workers' personal exposure was measured using 1-(2-methoxyphenyl)-piperazine (2MP)-impregnated glass fibre filters for sampling and high-performance liquid chromatography (HPLC) with ultraviolet (UV) and electrochemical (EC) detection for quantification. The limit of detection (LOD) of 2,4- and 2,6-TDI was 0.01 microtg ml(-1) for a 20 microl injection. The precision of sample preparation, expressed as the relative standard deviation (RSD), was 0.6% with UV detection and 0.8% with EC detection at a 2,4-TDI concentration of 0.2 microg ml(-1) (n = 6). For 2,6-TDI, the corresponding RSDs were 0.5% and 0.8%. The urinary 2,4- and 2,6-TDA metabolites were determined after acid hydrolysis as heptafluorobutyric anhydride derivatives by gas chromatography-mass spectrometry. The LOD in urine was 0.35 nmol l(-1) for 2,4-TDA and 0.04 nmol l(-1) for 2,6-TDA. The precision (RSD) of six analyses of human urine spiked to a concentration of 100 nmol l(-1) was 3.7% for 2,4-TDA and 3.6% for 2,6-TDA. There was a trend for linear correlation between urinary TDA concentration and the product of airborne TDI concentration and sampling time. Urinalysis of TDA is proposed as a practical method for assessing personal exposures in workers exposed intermittently to TDI.     

Application of asymmetric flow field-flow fractionation (AsFlFFF) coupled to inductively coupled plasma mass spectrometry (ICPMS) to the quantitative characterization of natural colloids and synthetic nanoparticles

A straightforward quantification method is presented for the application of asymmetric flow field-flow fractionation (AsFlFFF) combined with inductively coupled plasma mass spectrometry (ICPMS) to the characterization of colloid-borne metal ions and nanoparticles. Reproducibility of the size calibration and recovery of elements are examined. Channel flow fluctuations are observed notably after initiation of the fractionation procedure. Their impact on quantification is considered by using (103)Rh as internal reference. Intensity ratios measured for various elements and Rh are calculated for each data point. These ratios turned out to be independent of the metal concentration and total sample solution flow introduced into the nebulizer within a range of 0.4-1.2 mL min(-1). The method is applied to study the interaction of Eu, U(VI) and Th with a mixture of humic acid and clay colloids and to the characterization of synthetic nanoparticles, namely CdSe/ZnS-MAA (mercaptoacetic acid) core/shell-coated quantum dots (QDs). Information is given not only on inorganic element composition but also on the effective hydrodynamic size under relevant conditions. Detection limits (DLs) are estimated for Ca, Al, Fe, the lanthanide Ce and the natural actinides Th and U in colloid-containing groundwater. For standard crossflow nebulizer, estimated values are 7 x 10(3), 20, 3 x 10(2), 0.1, 0.1 and 7 x 10(-2) microg L(-1), respectively. DLs for Zn and Cd in QD characterization are 28 and 11 microg L(-1), respectively.     

Selection of internal standards for quantitative analysis by matrix-assisted laser desorption-ionization (MALDI) time-of-flight mass spectrometry

The selection of an appropriate internal standard (IS) for quantification by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry is critical for the successful application of quantitative MALDI. Selection of the IS depends on the chemical similarity of the analyte and IS and the mass separation of the analyte and IS as a function of instrumental peak resolution. For the quantification of bovine insulin, a series of internal standards including horse heart cytochrome C, bovine insulin chain B, des-pentapeptide human insulin, and des-octapeptide porcine insulin was investigated. Des-pentapeptide human insulin was found to be the most appropriate internal standard (relative standard deviation of the standard curve slope = 2.99%, correlation coefficient = 0.988 in the range of 0.5-0.4 μmol/L). Two methods for measuring of the MALDI signal intensity were evaluated, direct peak integration following subtraction of a linear background and non-linear least squares curve fitting. The results obtained with these methods were equivalent.     

Nickel quantification in serum by a validated sector-field inductively coupled plasma mass spectrometry method: Assessment of tentative reference values for an Italian population

The daily exposure to Ni from food, industrial processes, jewellery and coins makes the determination of Ni in human serum an important way to monitor the health status in non-occupationally exposed subjects. To this end, a method based on sector-field inductively coupled plasma mass spectrometry was developed and validated. The limits of detection (LoD) and quantification (LoQ), sensitivity, linearity range, trueness, repeatability, within-laboratory reproducibility and robustness were the considered issues of the validation process. The uncertainty associated with the measurements was also calculated, according to the Eurachem/Citac Guide. The method LoD and LoQ were 0.03 and 0.09 ng mL(-1), linearity was over two order of magnitude, trueness was -3.57%, and the repeatability and reproducibility showed relative standard deviations equal to 4.56% and 6.52%, respectively. The relative expanded uncertainty was 21.8% at the Ni levels found in the general population. The tentative reference value for serum Ni was 0.466 +/- 0.160 ng mL(-1) with a related interval between 0.226 and 1.026 ng mL(-1).     

Determination of 1-vinyl-2-pyrrolidone in human serum by high-performance liquid chromatography

Summary A simple method is described which allows the quantification of 1-vinyl-2-pyrrolidone (NVP) in human serum. NVP is extracted from serum with diethylether and determined with HPLC/UV-detection. 1-Cyclohexyl-2-pyrrolidone serves as an internal standard. The detection limit is 0.1 mg/l. The method has shown that NVP can enter the organisms of workers occupationally exposed to this substance.     

Potential of membrane-assisted solvent extraction for the determination of phosphoric acid triesters in wastewater samples by liquid chromatography-tandem mass spectrometry

A membrane-assisted solvent extraction (MASE) method is presented for the extraction of several non-ionic organophosphorus chemicals from wastewaters samples followed by LC-MS/MS determination. The method was developed for a variety of chlorinated phosphates (trichloroethyl, tichloropropyl) and non-chlorinated phosphates (triphenyl, tributyl) used as flame retardants and for plasticizers such as triethylhexyl and tris-butoxyethyl phosphate. Parameters such as extracting solvent, sample volume and ionic strength, extraction temperature and time were optimized. The final method provides good quantification limits (1-25 ng L(-1)) and linearity (R2>0.9978). Method precision was also good at high concentrations (5% mean RSD at the 500 ng L(-1) level) but decreased at lower concentrations (20% mean RSD at the 20 ng L(-1) level). MASE yields lower matrix effects than SPE in a successive LC-MS/MS analysis of these compounds, avoiding the need for standard addition for quantification. When applied to wastewater samples comparable results were obtained using either MASE with internal standard calibration or SPE with standard addition.     

气相色谱-三重四极杆串联质谱稳定同位素稀释法测定被动吸烟儿童尿液中的可丁宁

建立了被动吸烟儿童尿液中可丁宁的气相色谱-三重四极杆串联质谱（GC-MS/MS）稳定同位素稀释测定方法。尿液经过三氯甲烷提取、净化,采用气相色谱-三重四极杆串联质谱多反应监测（MRM）模式测定,以可丁宁-d₃稳定同位素为内标,定量测定和确证被动吸烟儿童尿液中的可丁宁;在0.1~10 μg/L可丁宁质量浓度范围内方法的线性关系良好,相关系数r>0.998;空白尿液中添加可丁宁0.1、1.0和10 μg/L,回收率为79.2%~112.8%,相对标准偏差在2.1%~5.8%之间;方法定量限达到0.1 μg/L。该方法准确、灵敏、快速,适用于家庭被动吸烟儿童尿液中可丁宁的测定。     

同位素稀释-高效液相色谱-质谱联用技术检测大鼠血浆中的芥子气水解产物

应用同位素稀释-高效液相色谱-质谱联用技术(LC-MS/MS),建立了同时定量检测血浆中芥子气水解代谢产物硫二甘醇(TDG)和二羟乙基亚砜(TDGO)的方法.应用甲醇和乙腈混合溶剂沉淀染毒大鼠血浆中蛋白,采用ZORBAX-C18色谱柱(100 mm×3.0 mm,3.5μm),以5 mmol/L甲酸铵-甲醇梯度洗脱分离待测物.以d8-TDG为内标,在正离子多反应监测模式下定性和定量分析TDG和TDGO.方法学验证结果表明,TDG在5～800 μg/L和TDGO在0.5～80.0 μg/L范围内均呈良好的线性关系(r2＞0.991),定量限分别为5和0.5 μg/L,加标回收率在101％～118％之间,方法的日内和日间精密度(RSD)均小于10％.对SD大鼠(n=6)采用皮下注射方式进行染毒后采样测定,代谢动力学参数计算结果显示,TDG和TDGO的达峰时间(tmax)分别为30和60 min,峰值浓度(cmax)为(1724±227)μg/L和(301±115)μg/L,血浆浓度-时间曲线下面积(AUC)为(3286±249) μg· h/L和(1010±363) μg· h/L.     

Trace determination of anthracyclines in urine: a new high-performance liquid chromatography/tandem mass spectrometry method for assessing exposure of hospital personnel

Health-care workers handling antineoplastic agents may be exposed to extremely low doses of these drugs. Very sensitive and specific analytical methods are therefore needed for biological monitoring. The aim of this study was to develop and validate a method for trace level determination of doxorubicin, epirubicin, daunorubicin and idarubicin in human urine, using epi-daunorubicin as an internal standard. Solid-phase extraction (SPE) was used for sample preparation. Urine samples were loaded onto Bond Elut C18 cartridges. The analytes were eluted in methylene chloride/2-propanol (1:1, v/v) and then evaporated to dryness. The residue was reconstituted with the mobile phase prior to high-performance liquid chromatography/tandem mass spectrometry (HPLC/MS/MS) analysis. Quantitation of each analyte was performed using the multiple reaction monitoring (MRM) method. The urine assay was linear over the range 0.1-2.0 microg/L, with a lower limit of quantification (LLOQ) of 0.10 microg/L for doxorubicin and epirubicin, and 0.03 microg/L for daunorubicin and idarubicin. The respective limits of detection (LODs) were 0.04 and 0.01 microg/L. The precision and accuracy of the assay were determined on three different days. The within-series precision was found to be always less than 13.9% for all the analytes. The overall precision expressed as relative standard deviation (RSD) was always less than 10.6%. The recovery of anthracyclines was assessed at two concentrations of the range tested (0.1 and 2.0 microg/L) and it ranged from 87.7% (daunorubicin) to 102.0% (doxorubicin) and from 79.1% (daunorubicin) to 90.7% (idarubicin) for the lower and the higher level, respectively, with a RSD always less than 9.1%. The uncertainty of the present assay was also evaluated and the combined uncertainty was always less than 20% over all the days of the validation study. This is the first method that makes use of LC/MS/MS for the biological monitoring of occupational exposure to anthracyclines.     

Derivatization and fragmentation pattern analysis of natural and synthetic steroids, as their trimethylsilyl (oxime) ether derivatives by gas chromatography mass spectrometry: analysis of dissolved steroids in wastewater samples

This paper reports the extension of our multiresidue analysis (MA) procedure with 18 natural and synthetic steroids; permitting the identification and quantification, in total of 81 pollutants from one solution, by a single injection, as their trimethylsilyl (TMS)-oxime ether/ester derivatives, by gas chromatography-mass spectrometry (GC-MS), within 31 min. As a novelty to the field, basic researches, such as fragmentation pattern analysis and derivatization optimization studies were performed for androsterone, transdehydroandrosterone, transandrosterone, mestranol, dihydrotestosterone, ethinylestradiol, testosterone, norethisterone, estriol, 4-androstene-3,17-dione, gestodene, levonorgestrel, etonogestrel, coprostanol, progesterone, cholesterol, medroxy-progesterone-acetate, stigmasterol and β-sitosterol. Results confirmed that (i) the TMS oxime-ether derivatives of the keto steroids provide from 1.40 times (gestodene) up to 4.25 times (norethisterone) higher responses compared to their TMS-ether ones, and (ii) the distribution of syn/anti oximes is characteristic to the ketosteroid species examined. Based on our optimized mass fragmentation, solid phase extraction (SPE) and derivatization studies separations have been performed in the total ion current (TIC) mode, identification and quantification of compounds have been carried out on the basis of their selective fragment ions. Responses, obtained with derivatized standards proved to be linear (hydroxysteroids), or have been calculated from calibration curves (ketosteroids) in the range of 1.88-750ng/L levels. Limit of quantitation (LOQ) values varied between 1.88ng/L and 37.5ng/L concentrations. The most important practical messages of this work are the high androsterone (0.744-4.28μg/L), transandrosterone (0.138-4.00μg/L), coprostanol (2.11-302μg/L), cholesterol (0.308-41μg/L), stigmasterol (1.21-8.40μg/L) and β-sitosterol (1.12-11.0μg/L) contents of influent wastewaters. β-Estradiol (100ng/L) and estriol (54ng/L) were found in one influent sample, only. Reproducibilities, characterized with the relative standard deviation percentages (RSD%) of measurements, varied between 1.73 RSD% (β-estradiol) and 5.4 RSD% (stigmasterol), with an average of 4.82 RSD%.     

Differential-pulse polarography (DPP) determination of betamethasone valerate in dosage form

The electrochemical reduction of betamethasone valerate (BV) in a pharmaceutical formulation containing neomycin has been carried out in Britton-Robinson buffer (BRB) (0.04 mol L(-1)) by differential-pulse polarography (DPP). BV exhibits a well-defined irreversible reduction peak at -1.03 V/ref. The influence of pH on the reduction of BV was studied in Britton-Robinson buffer (pH range 1.7-10). A method for the analysis of BV in BRB (0.04 mol L(-1)), which allows quantification over the range 3.9x10(-6)-1.1x10(-4) mol L(-1), was proposed and successfully applied to the determination of BV in tablets with mean recovery and relative standard deviation of 100.81% and 0.45%, respectively.     

Comparison of analyses of urinary 8-hydroxy-2'-deoxyguanosine by isotope-dilution liquid chromatography with electrospray tandem mass spectrometry and by enzyme-linked immunosorbent assay

A highly sensitive and selective method, using isotope-dilution liquid chromatography with tandem mass spectrometry (LC/MS/MS), for quantification of urinary 8-hydroxy-2'-deoxyguanosine (8-OHdG), an important biomarker of oxidative stress, was developed and compared with a method using an enzyme-linked immunosorbent assay (ELISA). The synthesis of (15)N(5)-8-OHdG is described. In this study, 140 urine samples were collected from workers in a coke oven plant, including samples from 49 control workers and 91 workers who had been occupationally exposed to polyaromatic hydrocarbons (PAHs). The major urinary metabolite of PAHs, 1-hydroxypyrene (1-OHP), was measured for the exposed workers. Results from the present study showed a significant correlation between these two measurements for determination of 8-OHdG (p < 0.05, r(2) = 0.70). However, only the LC/MS/MS measurements of urinary levels of 8-OHdG showed a significant difference between the exposed and the control subjects (p < 0.05). The ELISA method failed to demonstrate this difference. Furthermore, only by using the LC/MS/MS method was a significant correlation observed between the urinary levels of 1-OHP and 8-OHdG. These findings suggest that a highly specific and sensitive analytical method such as isotope-dilution LC/MS/MS is extremely important and necessary for accurate measurement and a comprehensive study of oxidative stress in human subjects.     

高效液相色谱法测定尿中苯的代谢物反，反-粘糠酸

建立了高效液相色谱测定职业苯接触者尿中苯的代谢物反,反-粘糠酸(tt-MA)的方法。该方法采用C18柱进行分离,以冰乙酸-四氢呋喃-甲醇-水(体积比为1∶2∶10∶87)为流动相,以香草酸为内标,于264 nm处进行紫外检测。尿样经2 mol/L盐酸酸化后用乙酸乙酯进行萃取。结果表明,所建立的标准曲线在tt-MA的质量浓度为0.10~10.00 mg/L时线性关系良好(r＝0.9999),加标回收率为95.1%~100.5%,日内和日间测定的相对标准偏差分别为4.0%~9.0%和6.2%~8.8%。应用该法测定职业苯接触者56人和非职业苯接触者24人尿中的tt-MA,结果显示职业苯接触者的尿中tt-MA含量明显高于非职业苯接触者,并与接触的苯的浓度呈线性相关(P＜0.01)。该方法灵敏、快速、经济、简便,可用于职业苯接触者的生物监测和毒物动力学研究。     

Direct analysis of isopropylthioxanthone (ITX) in milk by high-performance liquid chromatography/tandem mass spectrometry

A fast screening method is presented for detecting isopropylthioxanthone (ITX) contamination in milk. The method is based on direct high-performance liquid chromatography/tandem mass spectrometry (HPLC/MS/MS) analysis of milk samples. Sample preparation is limited to the addition of a deuterated ITX solution in acetonitrile that serves both as internal standard and to precipitate proteins. The method is highly accurate and sensitive. Isomeric specific analyses of 2-ITX and 4-ITX are possible at 6 microg/L levels with about 5% precision and accuracy. This approach has been used to check contamination in samples like milk, soy milk, baby milk, in their packaging material. Out of 37 milk samples analyzed, 16 were positive with concentrations ranging from 173-439 microg/L for 2-ITX and from <6 (lower than limit of quantification) to 25 microg/L for 4-ITX.     

Voltammetric determination of cadmium(II) using a chemically modified electrode

An 1-(pyridylazo)-2-naphthol modified glassy carbon electrode has been investigated as sensor for the measurement of trace levels of Cd2+. Cd2+ is deposited on the surface of a PAN modified glassy carbon electrode at -1.10 V (vs. SCE) via forming Cd2+-PAN and subsequent reduction at the electrode. In the following step, Cd-PAN is oxidized, and voltammograms are recorded by scanning the potential in a positive direction. Calibration plots were found to be linear in the range 2 x 10(-8) mol/L to 8 x 10(-7) mol/L. The detection limit was 5 x 10(-10) mol/L, and the coefficient of variation, determined on one single electrode at a concentration of 5 x 10(-7) mol/L, was calculated to be 3.2% (n = 5). Using this new kind of modified electrode, trace levels of Cd(II) in water samples were determined; the average recovery was calculated to be 98.78%.