Effect of microwave irradiation on polyphenolic compounds from Satureja hortensis L.

Summer savory (Satureja hortensis L.) is most often used as a culinary herb, but it also has medicinal benefits. The extracts from control and irradiated savory were obtained by ultrasound extraction for 30 minutes in an ethanol — water (80:20, v/v) mixture. Polyphenolic compounds from savory were identified and characterized by high-performance liquid chromatography coupled with a photodiode array detector and mass spectrometer. The separation was performed using an Altima C18 column (100×3 mm, 3 μm) and as mobile phase two solvent mixture: A — acetonitrile and B — water-formic acid (99.9:0.1, v/v). Peaks were identified with authentic standards in accordance to retention time, UV spectra and molecular mass. It was identified as caffeic acid, rosmarinic acid, luteolin, naringenin and apigenin. A quantitative determination of polyphenolic compounds was performed applying the external standard method. Our study showed large quantitative differences between the control plant and the irradiated plant.      

Determination of lead in solution by solid phase extraction, elution, and spectrophotometric detection using 4-(2-pyridylazo)-resorcinol

Lead (+2) was selectively adsorbed on a solid phase extraction (SPE) gel (molecular recognition technology, MRT), quantitatively extracted, and spectrophotometrically determined as the Pb(II)-PAR (4-(2-pyridylazo)-resorcinol) complex. The linear range was 0.01 to 0.75 mg L^?1 and the detection limit was 6.4 µg L^?1. The MRT-SPE allows selective Pb(II) extraction from complex ion-rich matrices, which is difficult with other techniques. Interference from common matrix ions such as Fe²⁺, Ni²⁺, Cu²⁺ or Co²⁺ is minimized.      

A validated stability-indicating LC method for simultaneous determination of quinapril and hydrochlorothiazide in pharmaceutical samples

A stability-indicating liquid chromatographic method was developed and validated for simultaneous determination of quinapril and hydrochlorothiazide in drug substances and dosage forms. Chromatographic separation of quinapril, hydrochlorothiazide and its degradation products was achieved on a RP-18 column, using acetonitrile and phosphate buffer (pH 4.6) as mobile phase in a gradient mode and detection at 216 nm. Stress testing was performed under hydrolytic, oxidative, thermal and photolytic conditions. The degradation products were well resolved from main peaks, proving the stability-indicating power of the method. The assay was linear for quinapril and hydrochlorothiazide concentrations of 40–200 µg mL^?1 and 25–125 µg mL^?1, respectively. The developed method was selective, accurate and precise for quinapril and hydrochlorothiazide determination. This method was used to quantify both drugs in combined commercial tablets. The results showed that the proposed method was found to be suitable for quantitative determination and the stability study of quinapril and hydrochlorothiazide in pharmaceutical samples.      

Sensitive and fast determination of papaverine by adsorptive stripping voltammetry on renewable mercury film electrode

The renewable mercury film electrode, applied for the determination of papaverine traces using differential pulse adsorptive stripping voltammetry (DP AdSV) is presented. The calibration graph obtained for papaverine is linear from 1.25 nM (0.42 µg L^?1) to 95 nM (32.2 µg L^?1) for a preconcentration time of 60 s, with correlation coefficient of 0.998. For the renewable mercury electrode (Hg(Ag)FE) with a surface area of 9.1 mm² the detection limit for a preconcentration time of 60 s is 0.7 nM (0.24 µg L^?1). The repeatability of the method at a concentration level of the analyte as low as 17 µg L^?1, expressed as RSD is 3.3% (n=5). The proposed method was successfully applied and validated by studying the recovery of papaverine from drugs, urine and synthetic solution.      

A low-cost automated flow analyzer based on low temperature co-fired ceramic and LED photometer for ascorbic acid determination

An automated flow analyzer based on low temperature co-fired ceramic (LTCC), a solid-phase reactor (SPR) and a low-cost photometer was designed for ascorbic acid (AA) determination in pharmaceutical formulations. It consists of a peristaltic pump, three-way solenoid valves, SPR to chemically convert Cu(II) into Cu(I), and a LTCC device for mixing the liberated copper with bathocuproine and detection. The flow cell in the LTCC employed an ultrabright LED — photodiode photometer. The analyzer successfully determined AA in pharmaceutical formulations. The analytical curve from 8.5×10^?6 to 7.0×10^?4 M gave a detection limit of 7.0×10^?7 M and a RSD of 2.1% for a 2.0×10^?4 M AA solution (n = 10). A high sampling frequency of 102 h^?1 and low reagent and sample consumption (150 µL) resulted.      

Polymer conjugates with potential biological activity based on new derivatives of 2-mercaptobenzoxazole-synthesis and characterization

New potentially biologically active compounds derived from 2-mercapto-benzoxazole were synthesized and coupled on polymeric support of poly (maleic anhydride-alt-vinyl acetate) for the preparation of polymer-drug conjugates with controlled drug release. All compounds were characterized by elemental and spectroscopy (FT-IR, ¹H-NMR) analysis. The toxicological tests recommend the products for further laboratory screening.      

A simple TLC and HPTLC method for separation of selected steroid drugs

Chromatographic properties of five steroid drugs: cortisone, hydrocortisone, methylprednisolone, prednisolone and norgestrel have been studied by normal-, reversed-phase and hydrophilic neutral cyano-bonded silica stationary phase with five binary mobile phases (acetonitrile-water, acetonitrile-DMSO, acetonitrile-methanol, acetone-petroleum ether, acetone-water) in which the concentration of organic modifier was varied from 0 to 100% (v/v). This study reports the optimization of steroid hormones separation. Chromatographic retention data and possible retention mechanisms are discussed. Separation abilities of mobile and stationary phases were studied using the principal component analysis method. The best separation of methylprednisolone and prednisolone is with a chromatographic system included silica gel as stationary phase and mixture of acetonitrile and DMSO (10:90 v/v). These two anti-inflammatory drugs can be fast separated from norgestrel when CN is used as stationary phase and acetone and water (40:60 v/v) as mobile phase. The highest values of the parameter Δ(ΔG°) and alfa for cortisone and hydrocortisone was observed in case of using CN as stationary phase and water-acetonitryle (40:60 v/v) as mobile phase.      

Two charge-transfer complex spectrophotometric methods for the determination of sulpiride in pharmaceutical formulations

Two simple, rapid, accurate and sensitive spectrophotometric methods are described for the determination of sulpiride. They are based on charge transfer complexation between the drug as n-electron donor and p-chloranilic acid as π acceptor or iodine as σ-acceptor. These give highly coloured complexes with absorption maxima at 518 and 363, 294 nm, respectively. Beer’s law linear ranges were 13.7–341.4 and 1.7–20.5 µg mL^?1 for the p-chloranilic acid and iodine methods. The methods were successfully applied to the determination of the drug in Dogmatil® Fort tablets and the results compared with the official method. The complex association constants and standard free energy changes were calculated using Benesi-Hildebrand plots.      

Voltammetric behavior of rutin at a boron-doped diamond electrode. Its electroanalytical determination in a pharmaceutical formulation

This paper examined for the first time, the possibilities of the usage of a boron-doped diamond electrode for the redox behavior of rutin using cyclic and adsorptive stripping voltammetry. The cyclic voltammograms showed a pair of redox peaks at lower potentials followed by an irreversible oxidation peak at higher positive potential. Using square-wave adsorptive stripping voltammetry, the compound yielded a well-defined voltammetric response in Britton-Robinson buffer, pH 4.0 at +0.48 V (vs. Ag/AgCl) (after 60 s accumulations at a fixed potential of 0.2 V). The calibration curve was linear in the concentration range from 0.01 µg mL^?1 to 0.1 µg mL^?1 (1.64×10^?8 M ? 1.64×10^?7 M). A detection limit of 0.0017 µg mL^?1 (2.78×10^?9 M) was observed without any chemical modifications and electrochemical surface pretreatments. As an example, the practical applicability of boron-doped diamond electrode was tested with the measurement of rutin in dietary supplement products.      

The first synthesis of 3-deoxyoripavine and its utilization in the preparation of 10-deoxyaporphines and cyprodime

The synthesis of 3-deoxyoripavine (7) was realized as a novel and promising intermediate towards the synthesis of the important class of dopaminergic and/or serotonergic 10-deoxyaporphines and the special pharmacological tool µ opioid antagonist cyprodime. Generally, the preparation of these valuable biologically active compounds was achieved in remarkable yields.      

Voltammetric quantitation at the mercury electrode of the anticholinergic drug flavoxate hydrochloride in bulk and in a pharmaceutical formulation

Flavoxate hydrochloride, 2-piperidinoethyl 3-methyl-4-oxo-2-phenyl-4-H-chromene-8-carboxylate, is a smooth muscle antispasmodic. Its electrochemical behavior was studied at the mercury electrode in buffered solutions containing 30% (v/v) methanol using dc-polarography, differential-pulse polarography, cyclic voltammetry, and linear sweep-and square-wave adsorptive stripping voltammetry. Sensitive and precise procedures were developed for determination of bulk flavoxate hydrochloride and in the pharmaceutical formulation Genurin® S.F, without sample pretreatment or extraction. Limits of quantitation (LOQ) of 1 × 10^?5, 5 × 10^?6, 1 × 10^?8 and 1 × 10^?9 M flavoxate hydrochloride were achieved by dc-polarography, differential-pulse polarography, linear sweep and square-wave adsorptive stripping voltammetric, respectively.      

Supramolecular complexes of podand ligands with xenon

Formation of stable complexes between xenon and podand polyoxyethylene ligands was ascertained. The complexation process was studied by ¹²⁹Xe NMR titration, NMR diffusiometry and heteronuclear NOE measurements. The ligands studied form a 1:1 complexes with Xe(0). Their stability constants depend on the ligand structure, i.e., polyoxyethylene chain length, number of complexating polyether units and the topology of the anchoring centre.      

Electrode processes of selected redox active substances on poly(o-aminophenol) film electrode

Using the method of cyclic voltammetry, the electrode process of Ni²⁺, Pb²⁺, Cu²⁺ and pyrocatechin on a poly(o-aminophenol) (PoAP) modified glassy carbon electrode (GCE) was investigated. The PoAP polymer was found to affect the redox process of copper and pyrocatechin. The use of polymer of different thicknesses showed that the obtained film has a dense, nonporous structure. The redox process of the examined substances may be considered as proceeding on the polymer surface. The PoAP polymer obtained in the described conditions takes part in charge transfer.      

Complexes of platinum and palladium with 4-nitrobenzoic hydrazide: synthesis and cytotoxic activity

New complexes of platinum and palladium were isolated with 4-nitrobenzoic hydrazide (4-NH) and characterized by spectroscopic techniques. Results show that the ligand is coordinated to metallic ions by the basic nitrogen of NH₂ group and have the general structure cis-[M(4-NH)₂X₂] where M= Pt or Pd and x = Cl or I. The compound III, [Pt(4-NH)₂I₂], was found to display cytotoxicity (IC₅₀ = 0.96 μmol L^?1) against the K562 tumoral cell line. This complex is significantly more cytotoxic than cisplatin.      

Activated carbon from bamboo waste modified with iron and its application in the study of the adsorption of arsenite and arsenate

Activated carbon obtained from bamboo waste was synthesised and modified with iron (BAC-Fe) and used for the removal of arsenic from aqueous solutions. Two different adsorption models were used for analysing the data. The adsorption capacities were determined for BAC-arsenite, BAC-Fe-arsenite, BAC-arsenate and BAC-Fe-arsenate, with a qmax (μg g^?1) of 14.89, 19.19, 22.32 and 27.32 respectively. Adsorption capacity varied as a function of pH and modifications to the sorbent. Adsorption isotherms from an aqueous solution of arsenite and arsenates on activated carbons were determined. These adsorption isotherms were consistent with the Langmuir and Freundlich adsorption models. Adsorption kinetics followed a pseudo-first order rate equation, as did the kinetics for BAC-Fe-arsenite and BAC-Fe-arsenate adsorption.      

LC-MS and FT-IR characterization of amber artifacts

This work focuses on using analytical methods, such as Fourier transform Infrared spectroscopy (FTIR) and high performance liquid chromatography (HPLC) with mass spectrometry (MS) detection to assess archaeological and geological amber. The main goal of this study is to apply the previously developed and optimized analytical methods in verifying criteria to ascribe and characterize the origin of materials found in archaeological sites. The proposed LC-MS method was successfully applied for the quantification of succinic acid content both in geological and archaeological samples of amber and offers excellent linearity between 0.1 and 5??g mL^?1. The developed FTIR method provided some criteria which is able to differentiate between Baltic and Romanian amber (Romanite) that furthermore validates on archaeological amber artefacts.      

Flow-injection spectrophotometric determination of dipyrone in pharmaceutical formulations using a solid-phase reactor with copper(II) phosphate

In this work, a flow-injection spectrophotometric method for dipyrone determination in pharmaceutical formulations was developed. Dipyrone sample solutions were injected into a carrier stream of deionized water and the reaction was carried out in a solid-phase reactor (12 cm, 2.0 mm i.d.) packed with Cu₃(PO₄)_2(s) entrapped in a matrix of polyester resin. The Cu(II) ions were released from the solid phase reactor by the formation of Cu(II)-(dipyrone)_n complex. When the complex is released, it reacts with 0.02% m/v alizarin red S in deionized water to produce a Cu(VABO₃)₃ complex whose absorbance was monitored at 540 nm. The calibration graph was linear over the range 5.0×10^?5–4.0×10^?4 mol L^?1 with a detection limit of 2.0×10^?5 mol L^?1 and relative standard deviation for 10 successive determinations of 1.5% (2.0×10^?4 mol L^?1 dipyrone solution). The calculated sample throughput was 60 h^?1. The column was stable for at least 8 h of continuous use (500 injections) at 25°C. Pharmaceutical formulations were analyzed and the results from an official procedure measurement were compared with those from the proposed FIA method in order to validate the latter method.      

Ionic liquids based on 2-chloroethyltrimethylammonium chloride (CCC) as plant growth regulators

Plant growth regulator — 2-chloroethyltrimethylammonium chloride (CCC) was converted into ionic liquid in the metathesis reaction. New forms of CCC as ILs were stable in air as well in contact with water and organic solvents. The biological action of the cation (CCC) in ILs was preserved. Type of anion determined hydrophobicity and hydrophilicity of the whole molecule and it also influenced the biological activity of the plant growth regulator. All of the investigated salts retarded growth of winter wheat stems and most of them increased yield at the same time, when compared to control and standard 2-chloroethyltrimethylammonium chloride.      

Rapid flow injection electrochemical detection of 3,3′,4,4′ tetrachlorobiphenyl using stabilized lipid membranes with incorporated sheep antibody

An electrochemical biosensor based on a supported polymerized lipid film with incorporated sheep anti-3,3′,4,4′ tetrachlorobiphenyl (PCB congener 77) antibody using flow injection analysis was developed. The polymerized lipid film contained 85% (w/w) dipalmitoylphosphatidylcholine (DPPC) and 15% (w/w) dipalmitoylphosphatidic acid (DPPA), methacrylic acid, ethylene glycol dimethacrylate, AIBN and sheep anti-congener 77 antiserum. Congener 77 was injected into flowing carrier electrolyte and the flow stopped to detect the antigen. These membranes gave only a single transient proportional to log [congener 77] from 10^?8 to 10^?5 M, with a detection limit of ca. 10^?8 M. A membrane containing 35% (w/w) DPPA was used to examine regeneration. The maximum number of cycles was about 5.