Polymer conjugates with potential biological activity based on new derivatives of 2-mercaptobenzoxazole-synthesis and characterization

New potentially biologically active compounds derived from 2-mercapto-benzoxazole were synthesized and coupled on polymeric support of poly (maleic anhydride-alt-vinyl acetate) for the preparation of polymer-drug conjugates with controlled drug release. All compounds were characterized by elemental and spectroscopy (FT-IR, ¹H-NMR) analysis. The toxicological tests recommend the products for further laboratory screening.      

Determination of lead in solution by solid phase extraction, elution, and spectrophotometric detection using 4-(2-pyridylazo)-resorcinol

Lead (+2) was selectively adsorbed on a solid phase extraction (SPE) gel (molecular recognition technology, MRT), quantitatively extracted, and spectrophotometrically determined as the Pb(II)-PAR (4-(2-pyridylazo)-resorcinol) complex. The linear range was 0.01 to 0.75 mg L^?1 and the detection limit was 6.4 µg L^?1. The MRT-SPE allows selective Pb(II) extraction from complex ion-rich matrices, which is difficult with other techniques. Interference from common matrix ions such as Fe²⁺, Ni²⁺, Cu²⁺ or Co²⁺ is minimized.      

The first synthesis of 3-deoxyoripavine and its utilization in the preparation of 10-deoxyaporphines and cyprodime

The synthesis of 3-deoxyoripavine (7) was realized as a novel and promising intermediate towards the synthesis of the important class of dopaminergic and/or serotonergic 10-deoxyaporphines and the special pharmacological tool µ opioid antagonist cyprodime. Generally, the preparation of these valuable biologically active compounds was achieved in remarkable yields.      

Enantioselective Michael additions of aldehydes to nitroalkenes catalyzed with ionically tagged organocatalyst

Enantioselective organocatalytic Michael additions affords useful building blocks for many biologically and medicinally relevant compounds. Ionically-tagged diphenylprolinol silyl ether efficiently catalyzes several Michael additions of aldehydes to nitroalkenes in ionic liquids. The Michael additions work well in ionic liquids; yields up to 95% and enantioselectivities up to 95% ee were achieved. Furthermore, in some cases, the catalytic system was reusable.      

The synthesis, structure and physical properties of lanthanide(III) complexes with nicotinic acid

This article reports the synthesis of novel, rare-earth coordination complexes with nicotinic acid. Three compounds with the general formula Ln₂[(C₅H₄NCOO)₆(H₂O)₄] (Ln = Yb, 1; Ln = Gd, 2; Ln = Nd, 3) were prepared from relatively cheap and readily available reactants. Their compositions and structure were characterized by IR spectroscopy and single-crystal X-ray diffraction. The magnetic and thermogravimetric properties were also studied. The complexes consist of centrosymetric, dimeric molecules having all six nicotinato ligands coordinated with the central atom in the bidentate mode. The coordination environment of the Ln³⁺ for all three compounds is 8. Here we describe the crystal structure of Yb and Gd complexes with nicotinic acid.      

Investigation of thermal and catalytic degradation of polystyrene waste into styrene monomer over natural volcanic tuff and Florisil catalysts

Thermal and catalytic degradation of polystyrene waste over two different samples of natural volcanic tuff catalyst comparative with Florisil catalyst has been carried out in order to establish the conversion degree into styrene monomer. The polystyrene waste (PS) was subjected to a thermal degradation process in the range of 380–500°C in presence of studied catalysts in a ratio of 1/10 in mass, catalyst/PS. The catalysts were characterized by N₂ adsorption-desorption isotherms (BET), Scanning Electron Microscopy (SEM) and Fourier-transform infrared spectrometry (FTIR). Influences of temperature and type of catalysts on the yields and on the distribution of end-products obtained by thermal and catalytic degradation of polystyrene waste have been studied. The maximum yields of liquid products were obtained at 460°C degradation temperature and were calculated between 83.45% and 90.11%. The liquid products were characterized by gas chromatography mass spectrometry (GC-MS) and FTIR analytical techniques. The GC-MS results showed that the liquid products contained styrene monomer up to 55.62%. The FTIR spectra of liquid products indicated the specific vibration bands of the functional groups of compounds of liquid products. The amounts of styrene monomer obtained were influenced by structural and textural properties of studied catalyst and the contribution on product distribution is discussed.      

Supramolecular complexes of podand ligands with xenon

Formation of stable complexes between xenon and podand polyoxyethylene ligands was ascertained. The complexation process was studied by ¹²⁹Xe NMR titration, NMR diffusiometry and heteronuclear NOE measurements. The ligands studied form a 1:1 complexes with Xe(0). Their stability constants depend on the ligand structure, i.e., polyoxyethylene chain length, number of complexating polyether units and the topology of the anchoring centre.      

Lead and cadmium atomic absorption determination in solid carbonized food samples using flame-furnace atomizer

Direct atomic absorption solid sampling analysis using flame-furnace atomizer enables a significant decrease in the analysis duration, to avoid sample pollution and to exclude toxic reagents. The selection of the chemical modifiers decreasing the detection limit and improving the results repeatability is based on the analyte’s free atoms formation mechanism. The developed kinetic approach has allowed to determine pre-exponential factors k₀ and apparent activation energies E_a of atomization processes for Pb(II) and Cd(II) compounds and to propose effective chemical modifiers sodium N,N-diethyldithiocarbamate and urea for food samples. The express and precision technique for lead and cadmium determination in food, using proposed chemical modifiers and carbonization techniques was developed.      

Chemical characterization of particulate matter (PM) and source apportionment study during winter and summer period for the city of Kozani,Greece

Eordaia basin located in northwest of Greece, comprises an area which is characterized by intense energy related activities, including coal burning at four power plants and the associated mining operations. Air samples of inhalable (PM10) and respirable particles (PM2.5) were collected in cold and warm periods in 2010 at an urban background site of Kozani, the major city and capital of the region which is located close to the power plants. Particulate matter concentration, particle-bound polycyclic aromatic hydrocarbons and anionic species concentrations were determined using gravimetric, GC-MS in SIM mode and Ion Chromatography analysis, respectively. For the cold period, the mean PM10 and PM2.5 mass concentration was found to be 19.62 and 14.68 µg m^?3, respectively. Correspondingly, for the warm period, the mean PM10 and PM2.5 values were 35.29 and 25.75 µg m^?3, respectively. In general, the results indicated that the major sources of air pollution in Kozani are traffic, combustion from agricultural activities and lignite power plants emissions, contributing by different percentages to each particle fraction.      

Debromination of 2,4,6-tribromophenol coupled with biodegradation

The application effect of aluminium and their alloys and mixtures with nickel was studied for the complete hydrodebromination of 2,4,6-tribromophenol (TBP) to phenol in aqueous NaOH solution at room temperature. It was found that the Raney Al-Ni alloy can rapidly transform TBP to phenol. Removal efficiency of 25 mM TBP solution in aqueous NaOH (15 g L^?1) solution at the end of 1h reaction was 100% using 4 g L^?1 Al-Ni. The hydrodebromination is accompanied by the dissolution of aluminium and formation of soluble Al(OH)₄ ^?1 anions under these reaction conditions. After completion of the hydrodebromination reaction removal of the dissolved metals was achieved by precipitation of appropriate hydroxides by adjustment of the pH value and filtration, the filtrate was treated with Pseudomonas or Rhodococcus bacterial strains to degrade dissolved phenol. The combined application of both (chemical-biological) treatments produced degradations of 100% of aromatic compounds.      

Stereoselective preparation of mono- and bis-derivatives of pentacyclo[6.3.0.02,6.03,10.05,9] undecane (D 3-trishomocubane)

The rearrangement of easily accessible Cookson’s diketone with chlorosulfonic acid in chloroform followed by the acidic hydrolysis gave 6-chloro-7-hydroxy-dichloropentacyclo[6.3.0.0^2,6.0^3,10.0^5,9]undecane-4-one, whose syn-stereochemistry was assigned through the X-ray crystal structure analysis. This key structure was used for the stereoselective synthesis of the D ₃-trishomocubane derivatives as well as for the preparation of potential drugs bearing hydroxy- and amino-functional groups. A new multigram preparative synthesis of D ₃-trishomocubane was developed.      

Preparation of selectively protected protoescigenin derivatives for synthesis of escin analogs and neoglycoconjugates

Protoescigenin, the main aglycone of horse chestnut saponin mixture known as escin, was selected as substrate for exploratory chemistry towards selective protection, followed by propargyl ether formation and subsequent condensation with azido-monosaccharides, to obtain novel triazole linked conjugates of the triterpene.      

Optimization methodology based on neural networks and genetic algorithms applied to electro-coagulation processes

An optimization methodology based on neural networks and genetic algorithms was developed and used to optimize a real world process — an electro-coagulation process involving three pollutants at different concentrations: kaolin (250–1000 mg L^?1), Eriochrome Black T solutions (50–200 mg L?1), and oil/water emulsion (1500–4500 mg L^?1). Feed-forward neural networks using heterogeneous combination of transfer functions were developed, leading to good results in the validation stage (relative error about 8%). The parameters of the process (concentration of pollutant, time, pH₀, conductivity and current density) were optimized handling the genetic algorithm parameters, in order to obtain a maximum removal efficiency for each pollutant. Therefore, the optimization methodology combines neural networks as modeling tools with genetic algorithms as solving method. Validation of the optimization results using supplementary experimental data reveals errors under 11%.      

Copper(I) π-complexes with allyl derivatives of heterocyclic compounds: structural survey of their crystal engineering

In this review an exhaustive crystallochemical analysis of copper(I) π-complexes with allyl derivatives of heterocyclic compounds has been performed. Structural genesis of inorganic constituents starting from the simplest units to the most complicated aggregates was considered taking into account the specific role of Cu-(C=C) interaction, the construction of the organic ligands, the basicity and nucleophilic activity of their heteroatoms, as well as olefin Cu(I) π-complex preparation route.      

Electrode processes of selected redox active substances on poly(o-aminophenol) film electrode

Using the method of cyclic voltammetry, the electrode process of Ni²⁺, Pb²⁺, Cu²⁺ and pyrocatechin on a poly(o-aminophenol) (PoAP) modified glassy carbon electrode (GCE) was investigated. The PoAP polymer was found to affect the redox process of copper and pyrocatechin. The use of polymer of different thicknesses showed that the obtained film has a dense, nonporous structure. The redox process of the examined substances may be considered as proceeding on the polymer surface. The PoAP polymer obtained in the described conditions takes part in charge transfer.      

The use of ultrasonic treatment for improvement of metrological performance of sorption atomic absorption determination of lead(II) and cadmium(II) traces

The optimal parameters for ultrasonic treatment (frequency 200–300 kHz, intensity 2–4 W cm^?2) were obtained to intensify Pb(II) and Cd(II) sorption concentration by carbon sorbent from apricot pit. The combined action of ultrasonic frequency of 18 kHz and 1 MHz on concentrate slurry increases its sedimentation stability from 3 to 180 minutes and decreases S_r value up to 7% at Pb(II), Cd(II) hybrid sorption atomic absorption determination in natural waters, brines, common salt.      

Two charge-transfer complex spectrophotometric methods for the determination of sulpiride in pharmaceutical formulations

Two simple, rapid, accurate and sensitive spectrophotometric methods are described for the determination of sulpiride. They are based on charge transfer complexation between the drug as n-electron donor and p-chloranilic acid as π acceptor or iodine as σ-acceptor. These give highly coloured complexes with absorption maxima at 518 and 363, 294 nm, respectively. Beer’s law linear ranges were 13.7–341.4 and 1.7–20.5 µg mL^?1 for the p-chloranilic acid and iodine methods. The methods were successfully applied to the determination of the drug in Dogmatil® Fort tablets and the results compared with the official method. The complex association constants and standard free energy changes were calculated using Benesi-Hildebrand plots.      

Organoruthenium(II) thiosemicarbazone complexes: synthesis, spectral characterization, DNA binding and DNA cleavage studies

A series of new ruthenium(II) complexes were synthesized with Schiff bases derived from salicylaldehyde / o-hydroxyacetophenone/ o-vanillin / 2-hydroxy-1-naphthaldehyde with thiosemicarbazide and acetyl furan. They are characterized by elemental analysis, IR, electronic, ¹H NMR, ¹³C NMR and mass spectral studies. The elemental analysis suggests the stoichiometry to be 1:1 (metal:ligand). Four of these complexes were tested for its binding with CT-DNA using absorption spectroscopic studies and two of these complexes exhibit efficient DNA cleavage activity.      

Experimental and theoretical studies on the photodegradation of 2-ethylhexyl 4-methoxycinnamate in the presence of reactive oxygen and chlorine species

2-Ethylhexyl 4-methoxycinnamate (EHMC) is one of the most commonly used sunscreen ingredient. In this study we investigated photodegradation of EHMC in the presence of such common oxidizing and chlorinating systems as H₂O₂, H₂O₂/HCl, H₂O₂/UV, and H₂O₂/HCl/UV. Reaction products were detected by gas chromatography with a mass spectrometric detector (GC-MS). As a result of experimental studies chloro-substituted 4-methoxycinnamic acid (4-MCA), 4-methoxybenzaldehyde (4-MBA) and 4-methoxyphenol (4-MP) were identified. Experimental studies were enriched with DFT and MP2 calculations. We found that reactions of 4-MCA, 4-MBA and 4-MP with Cl₂ and HOCl were in all cases thermodynamically favorable. However, reactivity indices provide a better explanation of the formation of particular chloroorganic compounds. Generally, those isomeric forms of mono- and dichlorinated compounds which exhibits the highest hardness were identified. Nucleophilicity of the chloroorganic compounds precursors were examined by means of the Fukui function.