Determination of osthole in rat plasma by high-performance liquid chromatograph using cloud-point extraction

A new straightforward method based on cloud-point extraction (CPE) was developed to determine osthole in rat plasma by reversed phase high-performance liquid chromatography with ultraviolet detection using a photodiode array detector. The non-ionic surfactant Triton X-114 was chosen as the extract solvent. Variable parameters affecting the CPE efficiency were evaluated and optimized. A Zorbax SB-C₁₈ column was used for elution separation at 25 °C with detection wavelength at 322 nm. Under the optimum conditions, the method was shown to be reproducible and reliable with intra-day precision below 7.62%, inter-day precision below 6.37%, and accuracy within ±5.02% and mean extraction recovery more than 90.4%, which were all calculated using a range of spiked samples at three concentrations of 0.5, 5.0 and 15.0 μg mL⁻¹ for osthole in plasma. The calibration curve for the analyte was linear in the range from 0.1 to 20 μg mL⁻¹ with the correlation coefficients greater than 0.9981. Limit of detection (S/N = 3) was less than 0.03 μg mL⁻¹and limit of quantification (S/N = 10) was less than 0.1 μg mL⁻¹. After strict validation, the method was successfully applied to the pharmacokinetic study of osthole in rats after oral and intravenous administration, respectively.     

Determination of Prometryne in water and soil by HPLC-UV using cloud-point extraction

A CPE-HPLC (UV) method has been developed for the determination of Prometryne. In this method, non-ionic surfactant Triton X-114 was first used to extract and pre-concentrate Prometryne from water and soil samples. The separation and determination of Prometryne were then carried out in an HPLC-UV system with isocratic elution using a detector set at 254 nm wavelength. The parameters and variables that affected the extraction were also investigated and the optimal conditions were found to be 0.5% of Triton X-114 (w/v), 3% of NaCl (w/v) and heat-assisted at 50 °C for 30 min. Using these conditions, the recovery rates of Prometryne ranged from 92.84% to 99.23% in water and 85.48% to 93.67% in soil, respectively, with all the relative standard deviations less than 3.05%. Limit of detection (LOD) and limit of quantification (LOQ) were 3.5 μg L⁻¹ and 11.0 μg L⁻¹ in water and 4.0 μg kg⁻¹ and 13.0 μg kg⁻¹ in soil, respectively. Thus, we developed a method that has proven to be an efficient, green, rapid and inexpensive approach for extraction and determination of Prometryne from soil samples.     

Analysis of meloxicam by high-performance liquid chromatography with cloud-point extraction

A simple cloud-point extraction method for the determination of meloxicam in human serum was developed. Meloxicam was extracted from serum sample after adding 1 mL of 3% (v/v) Triton X-114 aqueous solution in the presence of 1M HCl and 60 mg NaCl. The meloxicam, present in the surfactant-rich phase, was enriched again with acetonitrile. Tenoxicam was used as the external standard. The separation was achieved on a C18 analytical column with a mobile phase consisting of aqueous acetic acid (1%, v/v) and acetonitrile (54:46, v/v). UV detection was performed at 360 nm. The response was linear over the range 45–2000 ng mL⁻¹ in human serum, and intra- and interday precisions of less than 15.0% were obtained. The relative error was within ±3.0%. The recoveries of meloxicam were larger than 92.0%. The method was compared with liquid–liquid extraction. The results showed that the new method has a considerable LOQ and higher recoveries but poorer precision than liquid–liquid extraction, which exhibited poor recoveries of less than 86.0%, precisions of less than 5.0% and relative errors of less than 7.0%. The method was used for the determination of meloxicam in healthy human volunteers.     

Determination of disulfoton in surface water samples by cloud-point extraction and gas chromatography

This article proposes an alternative method, using cloud-point extraction and gas chromatography, for extraction and determination of disulfoton in water samples. For cloud-point extraction, the nonionic surfactant Triton X-114 was used. Before gas chromatography, a cleanup stage for surfactant removal from the extracts was optimized. Cleanup used two columns, in series, containing silica gel and Florisil, with methanol:hexane (1?:?1) as eluent, resulting in the removal of more than 95% of the Triton X-114. Factors such as ionic strength (>0.5?mol?L^?1) and surfactant concentration (1.0% w/v) increased the extraction efficiency of the cloud-point methodology, yielding disulfoton recoveries of almost 100%. Compared with liquid–liquid extraction, the cloud-point methodology was more efficient, with a better detectability, and resulted in a significant reduction in solvent volume.     

Development of an HPLC method for the determination of mexiletine in human plasma and urine by solid-phase extraction

A sensitive and specific high-performance liquid chromatography (HPLC) method has been developed and validated for the quantification of mexiletine (MEX) in human plasma and urine. It uses solid-phase extraction (SPE) followed by an automated reversed-phase HPLC with a pre-column derivatization with 4-chloro-7-nitrobenzofurazan (NBD-CI) and UV-vis Absorbance detection. The process was set as: the UV-vis Absorbance wavelength was set at 458 nm. Chromatographic separation was performed on a Phenomenex-C₁₈ Column (Aqua, 150 mm × 4.6 mm i.d. with 5 μm particle size) with the mobile phase consisting of acetonitrile and water (80:20, v/v), and the flow rate was set at 1.0 mL min⁻¹. Calibration of the overall analytical procedure gave a linear signal (r > 0.9998) over a MEX concentration range of 0.2-2.0 μg mL⁻¹ in human plasma and urine. The detection limit in plasma and urine was 0.1 μg mL⁻¹. Intra- and inter-day precision of the assay at three concentrations within this range were 0.31-2.50%. The high specificity and sensitivity have been achieved by this fast method (total run-time <6 min). The method has been successfully validated in human plasma and urine and it has been shown to be precise, accurate and reliable.     

Determination of a new calcium antagonist in human plasma by liquid extraction enrichment and HPLC with UV detection

Summary An HPLC method has been developed for the determination of SL 85.1016, a new calcium antagonist arylbenzylamide methylthioether derivative. SL 85.1016 and the internal standard, SL 87.0210, are extracted from alkaline human plasma withn-hexane and back extracted into 0.05 M phosphate buffer (pH 2.5; 0.2 ml). Acetonitrile (50 l) is added to the final aqueous extract in order to prevent absorption of the compounds of interest onto the walls of the glass tube; this solution then is partially processed by HPLC on a C₁₈ column with UV detection (254 nm). The determination limit of the method is 2 ng.ml^–1 of SL 85.1016 in human plasma; the response to the drug is linear in the range 2–200 ng.mg^–1.     

Rapid determination of haloperidol and its metabolites in human plasma by HPLC using monolithic silica column and solid-phase extraction

A rapid, sensitive and reproducible HPLC method was developed and validated for the analysis of haloperidol and its three main metabolites in human plasma. The analysis was carried out on a monolithic silica column (Chromolith Performance RP-18e, 100 x 4.6 mm). The mobile phase consisted of sodium phosphate (0.1 m, pH 3.5)-acetonitrile (80:20, v/v) at a flow rate of 2.0 mL/min. UV detection at 230 nm was used, with the detection limits of these compounds ranging from 2 to 5 ng. The separation factors of all studied compounds were in the range 2.30-16.32, while the resolution factors were from 1.00 to 5.37.     

Determination of captopril in human plasma with precolumn derivatization using solid phase extraction and HPLC

A rapid, accurate and sensitive method for the determination of captopril in human plasma was developed by solid phase extraction and high performance liquid chromatography (HPLC), using precolumn derivatization of captopril with chromophore label o-phethaldialdehyde (OPA). The extraction of captopril from human plasma was carried out by an amino propyl cartridge. A 0.01 M solution of HCl in methanol showed the best recovery and was chosen for elution of captopril in cartridge. This methanolic solution was applied to react with aqueous solution of OPA and glycine as a coderivatization reagent. The process of derivatization was completed within 2 min at room temperature. The derivatized captopril was injected into a reverse phase HPLC system. Mobile phase was consisted of water:acetonitrile:trifluoroacetic acid (85:15:0.1 v/v/v) with a flow rate of 1 ml min^?1 and detector was used at 345 nm. Linear dynamic range and limit of detection were found as 0.1–6 ppm and 0.1 ppm, respectively.     

Selective quantification of ambroxol in human plasma by HPLC

The bronchosecretolytic drug ambroxol can be reliably quantified in human plasma by high performance liquid chromatography. Plasma is buffered alkaline, extracted with ether, and the organic solvent back-extracted with diluted acid. An automatically sampled aliquot is separated by reversed phase HPLC; the analyte is well separated from two metabolites that interfered strongly in earlier methods. UV detection at 230 nm enables a lower limit of quantitation of 5 ng/ml. Internal standardization with propranolol allows accurate and precise quantification. Evaluation of the optimized combination of mobile and stationary phase is described, and application of the method to experimental and clinical pharmacokinetic studies is illustrated.     

Determination of cadmium and zinc in waters by flame atomic absorption spectrometry after cloud-point extraction

Phase separation of nonionic surfactants in aqueous solutions was used to extract cadmium and zinc. After complexation with 6-(4-nitrophenyl)-2,4-diphenyl-3,5-diazabicyclo[3.1.0]hexene-2 (pH 1), cadmium and zinc were quantitatively transferred into the phase rich with the nonionic surfactant octylphenoxypolyethoxyethanol. After the addition of tetrahydrofuran and HCl to the extract, the elements were determined by flame atomic absorption spectrometry.     

Determination of atorvastatin in human plasma by magnetic solid-phase extraction combined with HPLC and application to a pharmacokinetic study

A simple and sensitive analytical procedure by solid-phase extraction method combined with high-performance liquid chromatography and using of graphene–magnetite nanomaterials as sorbent has been developed for the determination of atorvastatin in human plasma. A magnetic solid-phase extraction method as a simple, fast, and efficient extraction technique has been used for sample preparation. A solid nanocomposite material, graphene nanosheets decorated with magnetite nanoparticles, was used as a magnetic adsorbent and the adsorption process was optimized in this study. RP C18 column was used with mobile phase composed of acetonitrile–10?mM orthophosphoric acid by isocratic elution with the flow rate of 1?mL?min^?1. Fluorimetric detection was used by the excitation wavelength at 282?nm and the emission wavelength at 400?nm. It was found that the calibration curve was linear in the 30–150?ng?mL^?1. Limit of detection and limit of quantitation values were found to be 10 and 30?ng?mL^?1, respectively. The intra-day and inter-day relative standard deviation values were less than 5.27%. It has been concluded that the new developed method provides fast, simple, cost reduced, and sensitive assay for atorvastatin determination in human plasma. This method is also applied to a pharmacokinetic study.     

Molecularly imprinted solid phase extraction for rapid screening of cephalexin in human plasma and serum

A molecularly imprinted solid phase extraction (MISPE) method was developed for the rapid screening of cephalexin in human plasma and serum. The method employed a micro-column packed with molecularly imprinted polymer (MIP) particles for the selective solid phase extraction (SPE) of cephalexin. Since the MIP interacted indiscriminately with two other α-aminocephalosporins, cefradine and cefadroxil, their removal was ultimately achieved using differential pulsed elution (DPE) with acetonitrile+12% acetic acid. Cephalexin was then determined in a final pulsed elution (FPE) with methanol+1% trifluoroacetic (CF₃COOH, TFA) acid. This excellent selectivity represents a significant advance in analytical separation, demonstrating how a MIP can differentiate between molecules that are structurally dissimilar only in their non-hydrogen-bonding moieties, even if their hydrogen-bonding moieties are identical to each other. With UV detection, a concentration detection limit of 0.1 μg/ml (or 2 ng in 20 μl) was afforded for cephalexin. By increasing the CHCl₃ flow rate to 1.25 ml/min, each MISPE-DPE-FPE analysis required only 2 min to complete. Rapid screening was demonstrated in a modified MISPE-PE method, which used 14% CH₃COOH+CH₃CN as the mobile phase, followed by direct PE with 1% TFA+CH₃OH.     

Comparison of traditional cloud-point extraction and on-line flow-injection cloud-point extraction with a chemiluminescence method using benzo[a]pyrene as a marker

In this work, using benzo(a)pyrene (BaP) as marker, the analytical merits of on-line flow-injection cloud-point extraction (FI CPE), including preconcentration factor, extraction efficiency, sample throughput, and analysis time were evaluated by use of peroxyoxalate chemiluminescence (CL) detection. Moreover, by detailed discussion of several preconcentration conditions for traditional and on-line FI CPE the advantages of on-line FI CPE became conspicuously apparent. When coupled with separation techniques such as high-performance liquid chromatography (HPLC) or capillary electrophoresis (CE), on-line FI CPE–CL has much potential for analysis of low concentrations of polycyclic aromatic hydrocarbons (PAH) in environmental samples.     

Development and application of high-performance liquid chromatography for the study of ampelopsin pharmacokinetics in rat plasma using cloud-point extraction

A simple, rapid and specific method based on cloud-point extraction (CPE) was developed to determine ampelopsin in rat plasma after oral administration by reversed-phase high-performance liquid chromatography. The non-ionic surfactant Genapol X-080 was chosen as the extract solvent. Some important parameters affecting the CPE efficiency, such as the nature and concentration of surfactant, extraction temperature and time, centrifuge time and salt effect, were investigated and optimized. Separation was accomplished using a C(18) column by gradient elution with a acetonitrile-phosphate buffer solution as the mobile phase. The detection wavelength was set at 290 nm. Under optimum conditions, the linear range of ampelopsin in rat plasma was 20-2000 ng/mL (r(2)=0.9996). The limit of detection was 6 ng/mL (S/N=3) with the limit of quantification being 20 ng/mL (S/N=10). The proposed method has been successfully applied for pharmacokinetic studies of ampelopsin from rat plasma after oral administration.     

Equilibrium partition of polycyclic aromatic hydrocarbons in a cloud-point extraction process

A cloud-point extraction (CPE) process using the nonionic surfactant Tergitol 15-S-7, a secondary ethoxylated alcohol, to extract selected polycyclic aromatic hydrocarbons (PAHs) from aqueous solutions is investigated. The CPE process is facilitated at the ambient temperature, ca. 22 degrees C, by the reduction of the cloud-point temperature of the surfactant solution by addition of sodium sulfate. It is observed that the preconcentration factor could be enhanced either by increasing the salt concentration or by decreasing the initial surfactant concentration in the micellar solution. A high preconcentration factor of about 40 was achieved at 1 wt% surfactant concentration with the addition of 0.6 M Na(2)SO(4). It is also noted that the equilibrium partition coefficients of the model PAHs are nearly independent of surfactant concentrations, up to 3 wt%, in this study. Correlations between the equilibrium partition coefficients K(p) of the PAHs and their octanol-water partition coefficients K(ow), as well as K(p) and the molar volume V(x) of these PAHs, indicate that the partition processes of the PAHs in the CPE processes are mainly governed by their hydrophobic affinities to the surfactant aggregates. Furthermore, the effect of added Na(2)SO(4) on the equilibrium partition coefficients is also studied. It is shown that addition of more Na(2)SO(4) to the surfactant solution gives more partition of the PAHs into the surfactant-rich phase.     

Preconcentration and speciation of chromium in water samples by atomic absorption spectrometry after cloud-point extraction.

A rapid, sensitive and accurate atomic absorption method for Cr(III) and Cr(VI) ions was developed based on the cloud-point extraction (CPE) technique. Cr(III) reacts with a new Schiff's base ligand to form the hydrophobic complex, which is subsequently entrapped in the surfactant micelles. The Cr(VI) assay is based on its reduction to Cr(III) by the addition of concentrated H2SO4 and ethanol to the sample solution. The condensed surfactant phase containing the metal chelates is introduced into an atomic absorption spectrometer. The relative standard deviations were 2.1% for both species and the limits of detection were around 0.17 microg l(-1).     

Determination of cadmium and zinc in water samples by flame atomic absorption spectrometry after cloud-point extraction

The phase-separation phenomenon of nonionic surfactants occurring in an aqueous solution was used for the extraction of Cd and Zn from water samples. After complexation with 6-(4-nitrophenyl)-2,4-diphenyl-3,5-diaza-bicyclo[3.1.0]hex-2-ene (NDDBH) in hydrochloric acid medium (pH 1), the analytes were quantitatively extracted after centrifugation into the phase rich in the nonionic surfactant octylphenoxypolyethoxyethanol (Triton X-114). Tetrahydrofuran acidified with 0.1 M HCl was added to the surfactant-rich phase prior to its analysis by flame atomic absorption spectrometry. The adopted concentrations for NDDBH, Triton X-114 and hydrochloric acid were all optimized. Detection limits (3σ) of 0.33 and 0.85 ng/mL along with enrichment factors of 157 and 118 for Cd and Zn, respectively, were achieved. The proposed method was applied to the determination of Cd and Zn in acidic solutions of certified reference materials. A comparison with certified values was performed for an evaluation of the accuracy, resulting in a good agreement according to the t-test at a 95% confidence level. The high efficiency of the cloud-point extraction to carry out the determination of the studied analytes in complex matrices was, therefore, demonstrated. The text was submitted by the authors in English.