Effect of preparation method on complexation of Cefdinir with β-cyclodextrin

The inclusion behaviour of β-cyclodextrin (βCD) was studied toward Cefdinir (CEF) in order to enhance the solubility and dissolution rate, following cyclodextrin complexation. Drug cyclodextrin solid systems were prepared by conventional methods of kneading (KN), co-evaporation (CE), spray drying (SD) and with a novel approach of microwave irradiation (MWI). The formation of inclusion complexes with βCD in the solid state, were confirmed by Differential scanning calorimetry (DSC), Fourier Transform Infrared spectroscopy (FTIR) and Scanning Electron Microscopy (SEM) studies, and comparative studies on the in vitro dissolution of CEF were carried out. Characterization of binary system by DSC, FTIR and SEM indicated that SD and MWI method resulted in formation of true complexes. Binary systems showed significant increase in dissolution rate as compared to plain drug. Amongst the binary systems MWI products were prepared in least time with better yield and highest dissolution rate.     

Effect of hydroxypropyl-β-cyclodextrin complexation on the aqueous solubility, structure, thermal stability, antioxidant activity, and tyrosinase inhibition of paeonol

The objective of this paper is to study the effect of hydroxypropyl-β-cyclodextrin (HP-β-CD) complexation on the aqueous solubility, structure, thermal stability, antioxidant activity, and tyrosinase inhibition of paeonol (PAE). The inclusion complex (PAE-HP-β-CD complex) of HP-β-CD and PAE was prepared by a freeze-drying method. Phase solubility tests showed that the stability constant of the inclusion complex was about 33.8?M^?1 at 25?°C. The experimental results of proton nuclear magnetic resonance (H-NMR) spectroscopy, differential scanning calorimetry (DSC) and X-ray diffraction (XRD) suggested that PAE was included by HP-β-CD to form the PAE-HP-β-CD complex. Furthermore, the thermogravimetric analysis (TGA) results showed that the thermal stability of PAE was improved when it was complexed with HP-β-CD. Comparing the antioxidant activity of PAE with that of the PAE-HP-β-CD complex at the same concentration revealed that the complex of PAE with HP-β-CD was better able to eliminate radical. Furthermore, the experimental results revealed that the formation of a complex with HP-β-CD increased the water solubility of PAE, improving its apparent inhibitive activity of tyrosinase.     

Preparation and characterization of the inclusion complex of Ofloxacin with ��-CD and HP-��-CD

The formation of the inclusion complexes of Ofloxacin with cyclodextrins (CDs) including ??-cyclodextrin (??-CD), and hydroxypropyl-??-cyclodextrin (HP-??-CD) were studied by Fluorescence, UV?CVis absorption spectroscopy and nuclear magnetic resonance spectroscopy (NMR) in solution. Experimental conditions including the concentration of various CDs and media acidity were investigated in detail at room temperature. The results suggested that in different pH solutions, CDs have different inclusive capacity to different forms Ofloxacin. ??-CD was most suitable for inclusion of neutral form and HP-??-CD was suitable for acidic form. The binding constant (K) of the inclusion complex was determined by fluorescence measurement, and the complexation ratio was determined as 1:1 in the concentration range used in this study. A mechanism was proposed to explain the inclusion process based on the experimental NMR data.     

Effect of particle size,dispersion, and particle–matrix adhesion on W reinforced polymer composites

W dispersed mixed polymers of ethylene propylene monomer and high density polyethylene were prepared by means of a twin-screw extruder by the conventional technique using a co-rotated two-roll mill. The W nanoparticles used as filler were prepared by pulse wire evaporation then coated with low-density polyethylene (LDPE) as polymeric surfactant. Surface treatment of the nanoparticles with LDPE was conducted to enhance the wettability and lubrication of the fillers in the polymer matrix. According to SEM images and mechanical properties, dispersion of W/LDPE nanoparticles in the polymer matrix was homogeneous, and adhesion of the nanoparticles to the matrix was strong. The polymer nanocomposites had better mechanical properties than those containing dispersed micro-W powder. The γ-ray attenuation factor of nanofiller-reinforced composites was substantially enhanced compared with that containing micro filler.     

Thermo-reversible flurbiprofen liquid suppository with HP-β-CD as a solubility enhancer: improvement of rectal bioavailability

The purpose of this work was to develop a thermo-reversible flurbiprofen liquid suppository base composed of poloxamer and sodium alginate for the improvement of rectal bioavailability of flurbiprofen. Cyclodextrin derivatives such as α-, β-, γ-cyclodextrin and hydroxypropyl-β-cyclodextrin (HP-β-CD) were used to enhance the aqueous solubility of flurbiprofen. The effects of HP-β-CD and flurbiprofen on the physicochemical properties of liquid suppository were then investigated. Pharmacokinetic studies were performed after rectal administration of flurbiprofen liquid suppositories with and without HP-β-CD or after intravenous administration of commercial Lipfen^® (flurbiprofen axetil-loaded emulsion) to rats, and their pharmcokinetic parameters were compared. HP-β-CD decreased the gelation temperature and reinforced the gel strength and bioadhesive force of liquid suppository, while flurbiprofen was opposed to HP-β-CD. Thermo-reversible flurbiprofen liquid suppository showed the physicochemical properties suitable for rectal administration. The flurbiprofen liquid suppository with HP-β-CD showed significantly higher plasma levels, AUC and C_max of flurbiprofen than those of the liquid suppository without HP-β-CD, indicating that flurbiprofen could be well absorbed due to the enhanced solubility by formation of inclusion complex. Moreover, the flurbiprofen liquid suppository with HP-β-CD showed an excellent bioavailability in that the AUC of flurbiprofen after its rectal administration was not significantly different from that after intravenous administration of commercial Lipfen^®. It is concluded that HP-β-CD could be a preferable solubility enhancer for the development of liquid suppository containing poorly water-soluble drugs.     

Complexation of capsaicin with β-cyclodextrins to improve pesticide formulations: effect on aqueous solubility, dissolution rate, stability and soil adsorption

The binary systems of capsaicin (CP) and β-cyclodextrin (βCD) or hydroxypropyl-β-cyclodextrin (HPβCD) were investigated in an attempt to improve formulations of this pesticide. UV spectral shift methods indicated guest–host complex formation between CP and the two cyclodextrins (CDs). Phase solubility analysis showed B_s type diagrams with βCD, A_L type with HPβCD indicating the formation of an inclusion complex at 1:1 stoichiometric ratio in solution state. Solubility profiles indicated a 50-fold enhancement of CP solubility could be achieved in the presence of 60 mM HPβCD with respect to CP alone. Solid co-evaporated systems (CES) with 1:0.5–1:5 molar ratios of CP/CDs were physicochemically characterized, revealing that the true inclusion complexes could be formed in the solid CP/βCD systems with 1:5 molar ratio and in the solid CP/HPβCD systems with the molar ratios more than 1:3, respectively. In contrast, crystalline drug was detectable in all other systems. Compared with corresponding physical mixtures (PMs), the CES exhibited significant enhancement with regard to CP dissolution and the protection from CP degradation under the accelerated conditions. It was also revealed that complexation of CP with HPβCD had a pronounced improved effect on the pesticide formulations and greatly reduced the amount of CP adsorbed in the soil. These results demonstrate that HPβCD may be a preferred excipient, enabling more efficient and intelligent use of CP/CDs inclusion complexes in the development of pesticide formulations.     

Behavior of nonionic emulsifier molecules on the preparation of nanoparticles from submicron-sized ionized styrene–methacrylic acid copolymer particles by the particle dissolution method

 Submicron-sized styrene–methacrylic acid copolymer (92/8 molar ratio) particles dissolved in the presence of polyoxyethylene nonylphenylether nonionic emulsifier under alkaline conditions at 90 °C, resulting in nanoparticles with diameters of about 30 nm. In order to clarify the role of the emulsifier molecules in the dissolution process, ¹H NMR measurements were carried out. As the particles swelled, the NMR integrals due to the emulsifier decreased markedly. This indicates that the emulsifier molecules permeated into the inside of the alkali-swelling particles and were adsorbed on the polymer molecules, which supports the formation mechanism of nanoparticles by the particle dissolution method proposed in a previous article. Received: 10 December 1998 Accepted in revised form: 1 April 1999     

Influence of the preparation method on the physicochemical properties of econazole-β-cyclodextrin complexes

Econazole (C₁₈H₁₅Cl₃N₂O) is one of the common antifungal agents whose poor aqueous solubility restricts its use for the treatment of oropharyngeal candidiasis, which is the first symptom of HIV infection. Therefore, the aim of the current study was to investigate the effect of different preparation methods (i.e. kneading, coevaporation, sealed-heating, and supercritical carbon dioxide (SC CO₂)) for obtaining solid inclusion complexes between β-cyclodextrin and econazole. The physico-chemical properties of the different products were characterized by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and powder X-ray diffractometry (PXRD). For the complexes prepared by the SC CO₂ method, the effects of temperature and pressure have also been investigated and related to the solubility of econazole in SC CO₂. Results suggested the validity of the SC CO₂ method for preparing solid complexes between cyclodextrins and econazole, avoiding the use of organic solvents and problems of their complete removal. Moreover, temperature played a major role in promoting drug-carrier interactions, whereas pressure had limited effects.     

Effect of γ-irradiation on the crystallinity and catalytic activity of NdX and NdY zeolites

Different Nd-zeolites were prepared from the original NaX and NaY zeolites by ion exchange. The hydrated and thermally activated (at 550 °C) samples obtained were irradiated with -rays of 1.5 and 10.0 Mrad. The unirradiated and irradiated samples were characterized mainly by X-ray diffraction and tested for catalytic activity in cumene cracking. The X-ray diffraction patterns indicated a slight decrease of crystallinity after irradiation. However, the irradiated samples exhibited higher catalytic activities than unirradiated ones. -Irradiated hydrated zeolites were found to possess comparable activities, whereas the irradiated dehydrated samples were more active. Higher irradiation doses resulted in more active dehydrated zeolites than those irradiated with a lower dose. The observed higher activity was attributed to the formation of tricoordinate aluminium atoms in the zeolite structure, leading to increase of the number of acidic sites and consequently to a catalytic activity.     

Effect of substituents on the solubility and the distribution of alkyl-substituted β-diketone iron chelates

The solubilities and the distributions of nine alkyl-substituted β-diketone iron chelates were measured in a number of common organic solvents, in order to establish the effect of substituents. In synthesis of iron chelates, acetylacetone, di-isobutyrylmethane and di-pivaloylmethane chelates were available with red-orange solid, while other chelates were red-orange oil. Using the solubilities and the respective molar volumes of these solid chelates, the solubility parameter values (δ_M) were calculated. The constancy of the calculated values was taken as evidence of the adequacy of the regular solution concept for explaining the observed solubility trends in the solvents studied. The molar volumes of iron chelates were nearly 1.5 times those of corresponding copper chelates and the solubility parameter values of the former were about the same as those of the latter. In the extraction of iron chelates, the extracted species were identified to be FeA₃ (A: β-diketone anion). The extraction constants (K_ex) of iron chelates does not depend on the nature of organic solvents. The distribution coefficients (P_Fe) of iron chelates increase regularly with the increase in the number of additional carbon atoms of the alkyl chain in the chelate molecule. The relationship between the solubilities or the distribution ratios of iron chelates and those of corresponding copper chelates were discussed.     

Effect of preparation conditions on the composition,structure, and properties of iron–molybdenum catalyst

X-ray phase analysis, synchronous thermal analysis, and IR spectroscopy were used to study the process in which an iron-molybdenum catalyst for partial oxidation of methanol to formaldehyde is prepared. The influence exerted by the pH of the medium on the composition, structure, and properties of the oxide Fe–Mo catalyst was examined. It was found that the amount of the active component in a sample obtained at pH 2 is the largest, and the sample exhibits the best activity in the reaction of methanol oxidation to formaldehyde. The possibility was examined of the occurrence of side reactions in which carbon monoxide is converted. It was found that the conversion occurs only on samples obtained at pH > 2.     

Effect of sulfate synthesis conditions on characteristics of samples with the nanosized η-TiO2 modification

The nanosized titania modification ??-TiO₂ has been obtained from titanyl sulfate with different starting precursor concentration, under different hydrolysis and coagulation conditions. Characteristics of samples (nanoparticle and crystallite size, specific surface, pore volume) have been determined by scanning electron microscopy, small-angle and wide-angle X-ray diffraction, and nitrogen physical adsorption at ?196°C, and their correlation with the synthesis conditions has been established. Optimal technological regimes ensuring fabrication of samples with a high yield of ??-TiO₂ modification and specified functional characteristics have been found.     

Extrathermodynamic relations in the binding of charged and neutral substrates to sulfobutylether-β-CDs (SBE-β-CDs) and a 2-hydroxypropyl-β-CD (HP-β-CD)

The thermodynamics of binding of various neutral, cationic and anionic substrates to β-cyclodextrin, a hydroxylpropyl-β-cyclodextrin (HP_4M-β-CD) and three sulfobutyl-β-cyclodextrins with varying degrees of total substitution (SBE_1M-β-CD, SBE_7M-β-CD, and SBE_12M-β-CD) were determined by estimating binding constants, using a UV spectrophotometric technique, and temperature variation. linear free energy relation (LFER) plots and enthalpy–entropy Compensation (EEC) plots provided insight into the mechanisms of complexation as did carbon T ₁ relaxation times using NMR. LFER plots for charged molecules with HP_4M-β-CD deviate from the neutral substrates suggesting differences in interaction modes. LFER plots for SBE_7M-β-CD show that cationic substrates surprisingly fall within the same linear relationship for neutral substrates while anionic substrates deviate. The EEC plots for HP_4M-β-CD show the largest loss of motion and degree of desolvation upon complexation. The interaction with SBE_1M-β-CD was similar to that for β-CD. SBE_7M-β-CD, and SBE_12M-β-CD EEC plots are similar with the least loss of motion upon complex formation, suggesting a more organized and less flexible structure. This is supported by the T ₁ relaxation times for SBE_1M-β-CD, SBE_7M-β-CD, and SBE_12M-β-CD, which show a critical distance at which the mobility of the side chain is reduced to form an extended cavity. No such evidence was seen with HP_4M-β-CD, although the effect of varying of hydroxypropyl substitution was not studied.     

The effect of β-cyclodextrin on the solubility and dissolution rate of meloxicam and investigation of the driving force for complexation using molecular modeling

The aim of this study was to investigate the effect of β-cyclodextrin (β-CD) on the solubility and dissolution rate of meloxicam. The methods that were employed to prepare meloxicam–β-cyclodextrin complexes were physical mixture, kneaded dispersion, and spray drying. Spray drying method was found to be the best to form a true inclusion complex. Complexes were characterized by thermal analysis, X-ray diffractometry (XRD), and Fourier transform infrared (FT-IR) spectroscopy. The apparent stability constant of the complex, K _c, calculated from the slope and intercept of the A_L solubility diagram was found to be 429.73, 259.96, 183.31, and 36.50 L mol^?1 at pH 2, 3, 6.5, and 10.3, respectively. The dissolution rate of meloxicam from the complexes was higher than from meloxicam alone. Molecular modeling was also used to investigate the interaction between meloxicam and β-CD. The dominant driving force for the complexation was evidently Van der Waals force with very little electrostatic contribution.     

Effect of medium acidity on the thermodynamics and kinetics of the reaction of pyridoxal 5′-phosphate with isoniazid in an aqueous solution

Thermodynamic characteristics of the formation of the Schiff base between isoniazid and pyridoxal 5'-phosphate in an aqueous solution at different pH values of a medium are determined by means of spectrophotometry and calorimetric titration. The process kinetics is studied spectrophotometrically, and the reaction rate constants for the formation of the imine at different acidities of a medium are determined. Biochemical aspects of the binding of pyridoxal 5'-phosphate into stable compounds are discussed.