表面活性剂双水相的性质及其应用 Ⅰ. 表面活性剂双水相的微环境性质

阴、阳离子表面活性剂混合体系，在一定浓度及混合比范围内，可以形成两个互不相溶、平衡共存的水相，称为表面活性剂双水相．其中阳离子表面活性剂过量的双水相体系，称为阳离子双水相．本文分别以芘和罗丹明B作为探针，用荧光探针法研究了摩尔比为1：6：1的C_12NE和SDS混合体系所形成的阳离子双水相，测定其上层和下层的胶束微环境的极性和微粘度，取得了有意义的结果．     

表面活性剂双水相的性质及其应用 Ⅰ. 表面活性剂双水相的微环境性质

阴、阳离子表面活性剂混合体系, 在一定浓度及混合比范围内, 可以形成两个互不相溶、平衡共存的水相, 称为表面活性剂双水相。其中阳离子表面活性剂过量的双水相体系, 称为阳离子双水相。本文分别以芘和罗丹明B作为探针, 用荧光探针法研究了摩尔比为1.6:1的C12NE和SDS混合体系成形成的阳离子双水相,测定其上层和下层的胶束微环境的极性和微粘度, 取得了有意义的结果。     

十四烷基三甲基氯化铵/十二烷基苯磺酸钠混合表面活性剂双水相体系的萃取性能

研究了十四烷基三甲基氯化铵(TTAC)与十二烷基苯磺酸钠(SDBS)混合表面活性剂水溶液双水相体系的分相情况、萃取性能及两相的微观结构.结果表明,TTAC/SDBS混合表面活性剂水溶液在30℃下能够形成稳定的双水相体系;该双水相体系对亚甲基蓝、靛红都具有一定的萃取分离作用.其上、下两相的微观结构明显不同,这是其能够形成稳定双水相体系且具有萃取作用的重要原因.     

pH及有机小分子物质对SDS/CTAB/H2O系统双水相性质的影响

正离子表面活性剂与负离子表面活性剂混合物能产生比单一表面活性剂更高的表面活性[1 ] 。在适当条件下 ,正负离子表面活性剂的水溶液能产生两个互不相溶的水相 ,即表面活性剂双水相系统[2 ] (ＡｑｕｅｏｕｓＴｗｏ -ＰｈａｓｅＳｙｓｔｅｍ -ＡＴＰＳ)。作者曾指出双水相上相为液晶 (ＬｉｑｕｉｄＣｒｙｓｔａｌ -ＬＣ)结构 ,下相为各向同性溶液 ,盐离子通过改变双水相中表面活性剂有序组合体的反离子层的状态而对双水相的组成、结构等产生重要的影响[3,4] 。本文进一步研究ｐＨ及有机小分子物质在十二烷基硫酸钠 /十六烷基三甲基溴化铵 /…     

表面活性剂阴离子双水相新体系及其对卟啉、染料的萃取

由阴阳离子型表面活性剂水溶液混合形成的双水相［１,２］是水相分离技术中的一个新分支．ＺＨＡＯ等［２］将阴阳离子表面活性剂过量的体系分别称为阴阳离子双水相．由溴化十二烷基三乙铵（Ｃ１２ＮＥ）和十二烷基硫酸钠（ＳＤＳ）组成的阳离子双水相对蛋白质［１］、酶［３］、氨基酸［４］和卟啉［５,６］等的萃取分离已有报道．与阳离子双水相比较,阴离子双水相分相时间慢,其萃取应用研究尚未见报道．本文在详细研究了ＳＤＳ－Ｃ１２ＮＥ阴离子双水相的基础上,将全氟型阴离子表面活性剂全氟辛酸钠（ＳＰＦＯ）引入这类水相分离体系…     

外加盐作用形成的正负离子表面活性剂双水相

癸基三乙基溴化铵-癸基磺酸钠（C10NE-C10SO3）等摩尔混合均相体系（即使在表面活性剂总浓度高达0.2 mol•L－1时仍然可形成稳定的均相溶液）在外加盐NaF、Na2SO4和Na3PO4的作用下可自发分离成两个水相（双水相）.研究了该类双水相体系的形成、相行为及其对牛血清蛋白（BSA）的分配，并与普通的正负离子表面活性剂混合双水相体系进行了比较.结果表明，该类双水相体系克服了普通的正负离子表面活性剂混合双水相体系的一些不足，具有一些独特的优点.该类双水相体系的相行为可以通过外加盐进行调控,通过外加盐的种类来调控和优化BSA的分配行为.图1表2参8     

阴阳离子型表面活性剂双水相萃取色氨酸衍生物和牛血清白蛋白

溴化十二烷基三乙胺（Ｃ１２ＮＥ）和十二烷基硫酸钠（ＳＤＳ）在一定条件下混合可以形成具有清晰界面的两个水相，称为阴阳离子型表面活性剂双水相。作者研究了利用该双水相萃取３种色氨酸衍生物和牛血清白蛋白的可能性．文中采用工作曲线校正扣除表面活性剂背景的影响，萃取结果准确可信。     

季铵盐表面活性剂引起非水混合溶剂的分相

当季铵盐表面活性剂在极性溶剂中具有合适溶解度时, 它可使该极性溶剂与另一种非极性溶剂形成的混合溶剂自发分相, 形成稳定的两相界面. 借鉴表面活性剂双水相现象的概念, 这种现象被称为表面活性剂非水双相(NSTP), 也可简称为双油相. 产生此种现象的原因被归结为季铵盐表面活性剂在极性溶剂中达到合适的溶解度时, 从而逐出与之不亲合的非极性溶剂.     

磺酸型双子表面活性剂的溶致液晶结构研究

合成了一种磺酸型双子表面活性剂6,6 -(丁基-1,4-二基双氧)双(3-壬基苯磺酸)(9BA-4-9BA), 利用偏光显微镜和X射线衍射分析仪研究了其在水溶液和乙酸乙酯溶液中的溶致液晶结构变化. 结果表明, 9BA-4-9BA在两种溶剂及其混合溶剂中均可出现溶致液晶态结构, 并且双子表面活性剂的溶致液晶相态与溶液浓度和溶剂种类密切相关. 随着浓度增加, 9BA-4-9BA水溶液溶致液晶结构由立方相经由片层立方相转变为层状液晶相, 乙酸乙酯溶液中主要以层状液晶相存在.     

新型无表面活性剂微乳液体系：乙醇/呋喃甲醛/水

通常, 微乳液一般由四个组分构成：水相、油相、表面活性剂和助表面活性剂。本文报道了一种不含表面活性剂的微乳液体系(简称SFME),由呋喃甲醛(油相),水和乙醇三组分构成,不含传统的表面活性剂。对其相行为进行了研究,发现存在一个单相微乳液区和一个两相平衡区。采用电导率法和冷冻蚀刻电镜(FF-TEM)考察了单相区域中微乳液的微结构,结果表明可分为油包水(O/W)、双连续(BC)和水包油(W/O)三个区域。液滴直径介于30~80nm。     

Interfacial tension of the aqueous two-phase systems of cationic-anionic surfactant mixtures

Interfacial tensions of the aqueous two-phase systems formed by cationic-anionic surfactant mixtures were measured using spinning drop method. The effects of surfactant structure, molar ratio of cationic to anionic surfactants, surfactant concentration, salt, and temperature on the interfacial tensions were investigated. It was shown that the values of the interfacial tensions of the aqueous two-phase were in the scale of ultra-low interfacial tensions at certain molar ratios of cationic to anionic surfactants. Three types of interfacial tension curves were observed. The first curve comprised two curves that were located on either side of 1:1 molar ratio, and the interfacial tension decreased with the increase of excessive surfactant components. The second one was a saddle-shaped curve that strode over the 1:1 molar ratio. The third type was a saddle-shaped curve that was located beside the 1:1 molar ratio. The types of interfacial tensions depended on the molecular structure of the surfactants such as the hydrophilic groups and the lengths and symmetry of hydrophobic chains.     

正负离子混合表面活性剂双水相界面张力的研究

用旋转滴法测定了正负离子混合表面活性剂形成的双水相界面张力, 研究了双水相界面张力与表面活性剂的分子结构、正负离子表面活性剂的摩尔比、总浓度、外加无机盐及温度的关系. 结果表明, 双水相界面张力在一定正、负离子表面活性剂的摩尔比时属于超低界面张力范围. 观察到三种界面张力曲线类型, 第一类为摩尔比1:1 的两边的两条曲线, 界面张力随过剩表面活性剂组分的比例增加而降低; 第二类为一条跨过摩尔比1:1的马鞍型曲线; 第三类为位于摩尔比1:1的一边的一条马鞍型曲线. 界面张力曲线的类型主要取决于表面活性剂的分子结构, 包括亲水基类型、疏水链长度及对称性.     

Characterization and Aggregation Behaviors of Mixed DDAB/SDS Solution With and Without Poly(4-styrenesulfonic Acid-Co-Maleic Acid) Sodium

Synthetic vesicles are formed by cationic and anionic surfactants, didodecyldimethylammonium bromide (DDAB), and sodium dodecylsulfate (SDS). The morphology, size, and aqueous properties of cationic/anionic mixtures are investigated at various molar ratios between cationic and anionic surfactants. The charged vesicular dispersions made of DDAB/SDS are contacted or mixed with negatively charged polyelectrolyte, poly(4-styrenesulfonic acid-co-maleic acid) sodium (PSSAMA), to form complexes. Depending on DDAB/SDS molar ratio or PSSAMA/vesicle charge ratio, complexes flocculation or precipitation occur. Characterization of the cationic/anionic vesicles or complexes formed by the catanionic vesicles and polyelectrolytes is performed by transmission electron microscope (TEM), dynamic light scattering (DLS), conductivity, turbidity, and zeta potential measurements. The size, stability, and the surface charge on the mixed cationic/anionic vesicles or complexes are determined.     

Aqueous Two‐Phase System (ATPS) Containing Gemini (12‐3‐12,2Br−) and SDS I: Phase Diagram and Properties of ATPS

Two phases coexist in an aqueous system that contains the two surfactants cationic gemini 12‐3‐12,2Br? and anionic SDS. An aqueous two‐phase system (ATPS) is formed in a narrow region of the ternary phase diagram different from that of traditional aqueous cationic‐anionic surfactant systems. In that region, the molar ratio of gemini to SDS varies with the total concentration of surfactants. ATPS not only has higher stability but also has longer phase separation time for the new systems than that of the traditional system. Furthermore, the optical properties of ATPS are different at different total concentrations. All of these experimental observations can be attributed to the unique properties of gemini surfactant and the synergy between the cationic gemini surfactant and the anionic surfactant SDS.     

Threadlike micelle formation of anionic surfactants in aqueous solution

We have investigated the formation of threadlike micelles consisting of anionic surfactants and certain additives in aqueous solution. Threadlike micelles long enough to be entangled with each other were formed in a clear aqueous solution of two anionic surfactants, sodium hexadecyl sulfate and sodium tetradecyl sulfate. These solutions also contained pentylammonium bromides or p-toluidine halides and exhibited remarkable viscoelasticity. Because the molar ratio of surfactants to cationic additives in these micelles seemed close to unity, they formed 1:1 stoichiometric complexes between surfactant anions and additive cations, as previously found in systems of cationic surfactants such as hexadecyltrimethylammonium bromide and sodium salicylate. The viscoelastic behavior of these anionic threadlike micellar systems was adequately described by a simple Maxwell element with a single relaxation time and strength, as in many similar cationic systems.     

Counterion binding on mixed anionic/cationic micelles

Measurements of counterion binding in mixtures of surfactant aqueous solutions have been performed to study the structure of the anionic/cationic mixed micelle/solution interface. The mixtures studied were SDS/DDAC and STS/TDPC. The binding of chloride and sodium ions to mixed anionic/cationic micelles was measured using ion-specific electrodes. Counterion binding was found to be strongly dependent on the molar ratio of surfactants present. The mixed micelle/solution interface includes the headgroups of both surfactants and counterions of surfactant in excess. The addition of oppositely charged surfactant caused an increasing dissociation of counterions.     

正、负离子表面活性剂混合体系溶致液晶生成的相行为

研究了烷基(C8,C12,C14)三甲基溴化铵、烷基(C12,C14)溴化吡啶与烷基(C8,C12)硫酸钠混合体系溶致液晶形成的条件与结构的变化.在高浓度的水溶液中,随着正、负离子表面活性剂摩尔比接近于1,液晶结构由六角相过渡为层状相.表面活性剂非极性链长改变,对相行为影响显著,短碳链的正、负离子表面活性剂混合体系,在等摩尔比时,体系为层状液晶或立方液晶为主,夹杂少许沉淀.随碳链增长,两类表面活性剂间的静电吸引效果表现为生成沉淀的摩尔比例范围变宽,沉淀量增多,共存的液晶相减少,甚至消失.若只改变正离子的极性头基,季胺盐比吡啶盐与烷基硫酸盐的作用要强,形成不溶物的混合摩尔比例范围更宽.     

Aqueous two-phase extraction system of sodium perfluorooctanoate and dodecyltriethylammonium bromide mixture and its application to porphyrins and dyes

A new aqueous two-phase system is developed consisting of sodium perfluorooctanoate (SPFO) and dodecyltriethylammonium bromide (C₁₂NE) cationic–anionic surfactant mixture. The two phases with a clear interfacial boundary formed when SPFO to C₁₂NE molar ratio is 1.2:1 in the presence of 5% (v/v) nitric acid. The top phase is transparent and the bottom phase is opalescent. Extractions of dyes, porphyrin compounds with the two-phase system were performed. The results show that hydrophobic molecules were extracted into the surfactant-rich bottom phase with high extraction efficiencies. Positively charged porphyrins were extracted into the bottom phase with higher extraction efficiencies than negatively charged porphyrins. Such a new anionic surfactant two-phase system would be complementary to the C₁₂NE–SDS (sodium dodecyl sulfate) cationic two-phase which has been proven to be effective for extractions of porphyrins with substituted groups like carboxyl or sulfonic acid groups.