Nanostructured Ni2P as a Robust Catalyst for the Hydrolytic Dehydrogenation of Ammonia–Borane

Ammonia–borane (AB) is a promising chemical hydrogen‐storage material. However, the development of real‐time, efficient, controllable, and safe methods for hydrogen release under mild conditions is a challenge in the large‐scale use of hydrogen as a long‐term solution for future energy security. A new class of low‐cost catalytic system is presented that uses nanostructured Ni₂P as catalyst, which exhibits excellent catalytic activity and high sustainability toward hydrolysis of ammonia–borane with the initial turnover frequency of 40.4 mol_(H2) mol_(Ni2P)^?1 min^?1 under air atmosphere and at ambient temperature. This value is higher than those reported for noble‐metal‐free catalysts, and the obtained Arrhenius activation energy (E_a=44.6 kJ mol^?1) for the hydrolysis reaction is comparable to Ru‐based bimetallic catalysts. A clearly mechanistic analysis of the hydrolytic reaction of AB based on experimental results and a density functional theory calculation is presented.     

Differential thermal analysis and thermogravimetry of ammonium perchlorate at pressures up to 51 ATM

The thermal decomposition of pure ammonium perchlorate (AP)was investigated in various gaseous atmospheres at pressures up to 51 atm, using a technique of thermal analysis. It is concluded that the first and second stage decompositions of AP in an atmosphere of oxygen or nitrogen are appreciably accelerated as the pressure is increased. Platinum has a catalytic effect in the high-temperature decomposition and suppresses the sublimation of AP at high temperature ranges in helium atmosphere even at 1 atm. The reaction heat for the high-temperature decomposition of AP in the platinum cell was calculated from the peak temperatures of DTA curves at various pressures to be 77.9 kcal mol^?1. The activation energies of the sublimation in helium at 1 atm and of the high-temperature decomposition in the platinum cell at various pressures of helium have also been obtained, giving similar values of 23–25 kcal mol^?1.     

Kinetics of thermal gas‐phase decomposition of 2‐bromopropene using static system

The gas phase elimination kinetics of 2‐bromopropene was studied over the temperature range of 571–654 K and pressure range of 12–46 Torr using the seasoned static reaction system. Propyne was the only olefinic product formed and accounted for >98% of the reaction. This product was formed by homogeneous, unimolecular pathways with high‐pressure first‐order rate constant k_∞ given by the equation k_∞ = 10^{13.47 ± 0.6} exp^{?208.2 ± 6.7} (kJ mol^?1)/RT. The error limits are 95% certainty limits. The observed Arrhenius parameters are consistent with the four centered activated complex. The presence of methyl group on α‐carbon lowers the activation energy by 41 kJ mol^?1. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 39: 1–5, 2007     

Negative thermal expansibility change for dissociation of lysozyme variant amyloid protofibril

A disulfide‐deficient variant of hen lysozyme, 0SS, is known to form an amyloid protofibril spontaneously, and to dissociate into monomers at high hydrostatic pressure. We carried out native PAGE at various temperatures (20–35°C) and pressures (0.1–200 MPa), to characterize the dissociation equilibrium of disulfide‐deficient variant of hen lysozyme amyloid protofibril. Based on the density profiles, the partial molar volume and thermal expansibility changes for dissociation, Δv_D and Δe_D, were obtained to be ?74 cm³/mol at 25°C and ?2.3 cm³ mol^?1 K^?1, respectively. The dissociation of amyloid fibril destroys the cross β‐structure, and such conformational destruction in native protein fold rarely accompanies negative thermal expansibility change. We discussed the negative thermal expansibility change in terms of hydration and structural packing of the amyloid protofibril.     

Synthesis of Ni–Ru Alloy Nanoparticles and Their High Catalytic Activity in Dehydrogenation of Ammonia Borane

We report the synthesis and characterization of new Ni_xRu_1?x (x=0.56–0.74) alloy nanoparticles (NPs) and their catalytic activity for hydrogen release in the ammonia borane hydrolysis process. The alloy NPs were obtained by wet‐chemistry method using a rapid lithium triethylborohydride reduction of Ni²⁺ and Ru³⁺ precursors in oleylamine. The nature of each alloy sample was fully characterized by TEM, XRD, energy dispersive X‐ray spectroscopy (EDX), and X‐ray photoelectron spectroscopy (XPS). We found that the as‐prepared Ni–Ru alloy NPs exhibited exceptional catalytic activity for the ammonia borane hydrolysis reaction for hydrogen release. All Ni–Ru alloy NPs, and in particular the Ni_0.74Ru_0.26 sample, outperform the activity of similar size monometallic Ni and Ru NPs, and even of Ni@Ru core‐shell NPs. The hydrolysis activation energy for the Ni_0.74Ru_0.26 alloy catalyst was measured to be approximately 37 kJ mol^?1. This value is considerably lower than the values measured for monometallic Ni (≈70 kJ mol^?1) and Ru NPs (≈49 kJ mol^?1), and for Ni@Ru (≈44 kJ mol^?1), and is also lower than the values of most noble‐metal‐containing bimetallic NPs reported in the literature. Thus, a remarkable improvement of catalytic activity of Ru in the dehydrogenation of ammonia borane was obtained by alloying Ru with a Ni, which is a relatively cheap metal.     

Ene reaction between 4-phenyl-1,2,4-triazoline-3,5-dione and hex-1-ene. The enthalpies,entropies, and volumes of activation and reaction in solution

The rates of an ene reaction between 4-phenyl-1,2,4-triazoline-3,5-dione and hex-1-ene were studied in a temperature range of 15–40 °C and in a pressure range of 1–2013 bar. The enthalpy of reaction in 1,2-dichloroethane (?158.2±1.0 kJ mol^?1), the enthalpy (51.3±0.5 kJ mol^?1), entropy (122±2 J mol^?1 K^?1), and volume of activation (?31.0±1.0 cm3 mol^?1), and the volume of this reaction (?26.6±0.3 cm³ mol^?1) were determined. The high exothermic effect of the reaction suggests its irreversibility.     

Low‐Temperature Oxidation of Carbon Monoxide with Gold(III) Ions Supported on Titanium Oxide

Au/TiO₂ catalysts prepared by a deposition–precipitation process and used for CO oxidation without previous calcination exhibited high, largely temperature‐independent conversions at low temperatures, with apparent activation energies of about zero. Thermal treatments, such as He at 623 K, changed the conversion–temperature characteristics to the well‐known S‐shape, with activation energies slightly below 30 kJ mol^?1. Sample characterization by XAFS and electron microscopy and a low‐temperature IR study of CO adsorption and oxidation showed that CO can be oxidized by gas‐phase O₂ at 90 K already over the freeze‐dried catalyst in the initial state that contained Au exclusively in the +3 oxidation state. CO conversion after activation in the feed at 303 K is due to Au^III‐containing sites at low temperatures, while Au⁰ dominates conversion at higher temperatures. After thermal treatments, CO conversion in the whole investigated temperature range results from sites containing exclusively Au⁰.     

Ethylene polymerization with long‐lifetime monopendant thienyl‐substituted group 4 metallocenes

A series of group 4 metallocenes (RCp)[Cp―(bridge)―(2‐C₄H₃S)]MCl₂ [M = Ti ( C1 , C2 , C3 , C4 ); M = Zr ( C5 , C6 , C7 , C8 )] bearing a pendant thiophene group on a cyclopentadienyl ring have been synthesized, characterized and tested as catalyst precursors for ethylene polymerization. The molecular structures of representative titanocenes C2 and C4 were confirmed by single‐crystal X‐ray diffraction and revealed that both complexes exist in an expected coordination environment for a monomeric bent metallocene. No intramolecular coordination between the thiophene group and the titanium center could be observed in the solid state. Upon activation by methylaluminoxane (MAO), titanocenes C1 , C2 , C3 , C4 showed moderate catalytic activities and produced high‐ or ultra‐high‐molecular‐weight polyethylene (M_v 70.5–227.1 × 10⁴ g mol^?1). Titanocene C3 is more active and long‐lived, with a lifetime of nearly 9 h at 30 °C. At elevated temperatures of 80–110 °C, zirconocenes C5 , C6 , C7 , C8 displayed high catalytic activities (up to 27.6 × 10⁵ g PE (mol Zr)^?1 h^?1), giving high‐molecular‐weight polyethylene (M_v 11.2–53.7 × 10⁴ g mol^?1). Even at 80 °C, a long lifetime of at least 2 h was observed for the C8/MAO catalyst system. Copyright © 2014 John Wiley & Sons, Ltd.     

Vinyl addition polymerization of norbornene using cyclopentadienylzirconium trichloride activated by isobutyl‐modified methylaluminoxane

Norbornene polymerization using the commercially available and inexpensive catalyst system, cyclopentadienylzirconium trichloride (CpZrCl₃) and isobutyl‐modified methylaluminoxane (MMAO), were carried out over a wide range of polymerization temperatures and monomer concentrations. For the CpZrCl₃ catalyst system activated by aluminoxane with a 40 mol % methyl group and a 60 mol % isobutyl group (MMAO_40/60), the polymerization temperature and monomer concentration significantly affected the molecular weight (M_n) of the obtained polymer and the catalytic activity. With an increase in the polymerization temperature from 0 to 27 °C, the catalytic activity and M_n increased, but these values dramatically decreased with the increasing polymerization temperature from 27 to 70 °C, meaning that the most suitable temperature was 27 °C. The CpZrCl₃/MMAO_40/60 ([Al]/[Zr] = 1000) catalyst system with the [NB] of 2.76 mol L^?1 at 27 °C showed the highest activity of 145 kg mol_Zr^?1 h^?1 and molecular weight of 211,000 g mol^?1. The polymerization using the CpZrCl₃/MMAO_40/60 catalyst system proceeds through the vinyl addition mechanism to produce atactic polynorbornene, which was soluble in chloroform, toluene, and 1,2‐dichlorobenzene, but insoluble in methanol. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1185–1191, 2008     

Hydrolysis kinetics of 2‐cyanopyridine, 3‐cyanopyridine,and 4‐cyanopyridine in high‐temperature water

We report herein the kinetic studies on hydrolysis of three cyanopyridines in high‐temperature water. 3‐Cyanopyridine, 4‐cyanopyridine and 2‐cyanopyridine underwent consecutive hydrolysis to the corresponding pyridinecarboxamides and picolinic acids. Further decarboxylation to pyridine was observed for 2‐cyanopyridine hydrolysis. Experiments at different initial reactant concentrations revealed that these compounds exhibited the first‐order kinetics. Experiments at different temperatures showed that the first‐order rate constants displayed an Arrhenius behavior with activation energies of 74.3, 40.3, and 83.7 kJ mol^?1 for 3‐cyanopyridine, 4‐cyanopyridine, 2‐cyanopyridine, respectively. The activation energies obtained for 3‐pyridinecarboxamide, 4‐pyridinecarboxamide and 2‐pyridinecarboxamide hydrolysis are 80.1, 32.7, and 70.5 kJ mol^?1, respectively. The effect of substituent position on activation energies for cyanopyridine and pyridinecarboxamide hydrolysis is ortho ≈ meta > para. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 641–648, 2012     

Single and binary catalyst systems based on nickel and palladium in polymerization of ethylene

The catalyst (N,N‐bis(2,6‐dibenzhydryl‐4‐ethoxyphenyl)butane‐2,3‐diimine)nickel dibromide, a late transition metal catalyst, was prepared and used in ethylene polymerization. The effects of reaction parameters such as polymerization temperature, co‐catalyst to catalyst molar ratio and monomer pressure on the polymerization were investigated. The α‐diimine nickel‐based catalyst was demonstrated to be thermally robust at a temperature as high as 90 °C. The highest activity of the catalyst (494 kg polyethylene (mol cat)^?1 h^?1) was obtained at [Al]/[Ni] = 600:1, temperature of 90 °C and pressure of 5 bar. In addition, the performance of a binary catalyst using nickel‐ and palladium‐based complexes was compared with that of the corresponding individual catalytic systems in ethylene polymerization. In a study of the catalyst systems, the average molecular weight and molecular weight distribution for the binary polymerization were between those for the individual catalytic polymerizations; however, the binary catalyst activity was lower than that of the two individual ones. The obtained polyethylenes had high molecular weights in the region of 10⁵ g mol^?1. Gel permeation chromatography analysis showed a narrow molecular weight distribution of 1.44 for the nickel‐based catalyst and 1.61 for the binary catalyst system. The branching density of the polyethylenes generated using the binary catalytic system (30 branches/1000 C) was lower than that generated using the nickel‐based catalyst (51/1000 C). X‐ray diffraction study of the polymer chains showed higher crystallinity with lower branching of the polymer obtained. Also Fourier transform infrared spectra confirmed that all obtained polymers were low‐density polyethylene.     

Kinetics of Lab Prepared Manganese Oxide Catalyzed Oxidation of Benzyl Alcohol in the Liquid Phase

The oxidation of benzyl alcohol in the liquid phase was studied over manganese oxide catalyst using molecular oxygen as an oxidant. Manganese oxide was prepared by a mechanochemical process in solid state and was characterized by chemical and physical techniques. The catalytic performance of manganese oxide was explored by carrying out the oxidation of benzyl alcohol at 323–373 K temperature and 34–101 kPa partial pressure of oxygen. Benzaldehyde and benzoic acid were identified as the reaction products. Typical batch reactor kinetic data were obtained and fitted to the Langmuir–Hinshelwood, Eley–Rideal, and Mars–van Krevelene models of heterogeneously catalyzed reactions. The Langmuir–Hinshelwood model was found to give a better fit. Adsorption of benzyl alcohol at the surface of the catalyst followed the Langmuir adsorption isotherm. The heat of adsorption for benzyl alcohol was determined as –18.14 kJ mol^?1. The adsorption of oxygen followed the Temkin adsorption isotherm. The maximum heat of adsorption for oxygen was –31.12 kJ mol^?1. The value of activation energy was 71.18 kJ mol^?1, which was apparently free from the influence of the heat of adsorption of both benzyl alcohol and oxygen.     

Immobilization of phosphotungstic acid in an amino‐containing metal–organic framework for oxidative desulfurization

A composite material has been successfully synthesized using an amino‐containing metal–organic framework (NH₂‐MOF) and phosphotungstic acid (PTA). This composite was characterized using X‐ray diffraction, high‐resolution transmission electron microscopy, nitrogen adsorption–desorption measurements, Fourier transform infrared spectroscopy and X‐ray fluorescence. Characterization results confirmed the immobilization and good distribution of PTA in the NH₂‐MOF. The PTA/NH₂‐MOF was subsequently applied in the oxidative desulfurization of dibenzothiophene (DBT) with H₂O₂ as the oxidant in n‐octane under atmospheric conditions. Under optimal reaction conditions, the oxidative desulfurization conversion of DBT reached 100%, and there was no significant decrease of the catalytic activity after four recycles. Kinetic experiments were also performed for the reaction at various temperatures, which indicated that oxidative reaction rates followed pseudo first‐order kinetics, and the apparent activation energy for the desulfurization reaction was 34.1 kJ mol^?1. The results indicated that this material exhibited excellent catalytic performance for oxidative desulfurization of DBT. Copyright © 2016 John Wiley & Sons, Ltd.     

Kinetic rules of precipitation of thin films of titanium dioxide from the gas phase containing titanium tetraisopropylate

Precipitation of titanium dioxide layers from the gas phase in the reaction system containing titanium tetraisopropylate and oxygen at the total pressure 1 kPa is studied. It is shown that in the range of 300–500°C the precipitation proceeds in the kinetic regime and is accompanied by the formation of layers of monotonous thickness containing nanocrystalline phases of anatase and rutile. In the temperature range 300–350°C the activation energy value was 92.7 kJ mol^?1, and at higher temperatures (up to 500°C) it decreased to 17.5 kJ mol^?1. The increase in the precipitation temperature caused the increase in relative amount of rutile in the precipitated layers.     

C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands prepared by different in situ bonding mechanisms and their use in catalytic (co)polymerization of norbornene and styrene

Two C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands with electron‐withdrawing groups (─CF₃), Ni{PhC(O)CHC[N(9‐fluorenyl)]CF₂}₂ (Ni 1 ) and Ni{CF₃C(O)CHC[N(9‐fluorenyl)]Ph}₂ (Ni 2 ), were synthesized by metal coordination reaction and different in situ bonding mechanisms. The C–C bridged bonds of Ni 1 were formed by in situ intramolecular trifluoromethyl and 9‐fluorenyl carbon–carbon cross‐coupling reaction and those of Ni 2 were formed by in situ intramolecular 9‐fluorenyl carbon–carbon radical coupling reaction mechanism. The obtained complexes were characterized using ¹H NMR spectroscopy and elemental analyses. The crystal and molecular structures of Ni 1 and Ni 2 with C–C bridged configuration were determined using X‐ray diffraction. Ni 1 and Ni 2 were used as catalysts for norbornene (NB) polymerization after activation with B(C₆F₅)₃ and the catalytic activities reached 10⁶ g_polymer mol_Ni^?1 h^?1. The copolymerization of NB and styrene catalyzed by the Ni 1 /B(C₆F₅)₃ system showed high activity (10⁵ g_polymer mol_Ni^?1 h^?1) and the catalytic activities decreased with increasing feed content of styrene. All vinyl‐type copolymers exhibited high molecular weight (10⁴ g mol^?1), narrow molecular weight distribution (M_w/M_n = 1.71–2.80), high styrene insertion ratios (11.13–50.81%) and high thermal stability (T_d > 380°C) and could be made into thin films with high transparency in the visible region (400–800 nm).     

Pressure effects on cation migration in 2,5‐di‐tert‐butyl‐1,4‐benzoquinone radical anion

Pressure effects on the two‐site jumping of sodium and potassium cations in a 2,5‐di‐tert‐butyl‐1,4‐benzoquinone ion pair have been studied using a high‐pressure EPR technique. The rate constants of the intramolecular and intermolecular migrations for Na⁺ and K⁺ were determined from an EPR spectral simulation. The migration rates were found to be accelerated by increasing the external pressure. Using the pressure dependence of the migration rates, we estimated the activation volumes of the intramolecular (ΔV₁^?) and intermolecular (ΔV₂^?) processes for the Na⁺ and K⁺ migrations: ΔV₁^? = ?5.3 cm³ mol^?1 and ΔV₂^? = ?29 cm³ mol^?1 for Na⁺, and ΔV₁^? = ?8.3 cm³ mol^?1 and ΔV₂^? = ?0.85 cm³ mol^?1 for K⁺. Based on the results, the mechanisms for the two‐site jumping of Na⁺ and K⁺ are discussed in terms of volume. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 397–401, 2001     

Hydrogen sorption–desorption studies on ZrCo–hydrogen system

The ZrCo–H₂ system was investigated in this study owing to its importance as a suitable candidate material for storage, supply, and recovery of hydrogen isotopes. Desorption hydrogen pressure-composition isotherms were generated at six different temperatures in the range of 524–624 K. A van’t Hoff plot was constructed using the plateau pressure data of each pressure-composition isotherms and the thermodynamic parameters were calculated for the hydrogen desorption reaction of ZrCo hydride. The enthalpy and entropy change for the desorption of hydrogen were found to be 83.7 ± 3.9 kJ mol^?1 H₂ and 122 ± 4 J mol^?1 H₂ K^?1, respectively. Hydrogen absorption kinetics of ZrCo–H₂ system was studied at four different temperatures in the range of 544–603 K and the activation energy for the absorption of hydrogen by ZrCo was found to be 120 ± 5 kJ mol^?1 H₂ by fitting kinetic data into suitable kinetic model equation.     

In Situ Facile Synthesis of Ru‐Based Core–Shell Nanoparticles Supported on Carbon Black and Their High Catalytic Activity in the Dehydrogenation of Amine‐Boranes

Well‐dispersed core–shell Ru@M (M=Co, Ni, Fe) nanoparticles (NPs) supported on carbon black have been synthesized via a facile in situ one‐step procedure under ambient condition. Core‐shell Ru@Co NPs were synthesized and characterized for the first time. The as‐synthesized Ru@Co and Ru@Ni NPs exhibit superior catalytic activity in the hydrolysis of ammonia borane compared with their monometallic and alloy counterparts. The Ru@Co/C NPs are the most reactive, with a turnover frequency (TOF) value of 320 (mol min^?1) mol_Ru^?1 and activation energy (E_a) of 21.16 kJ mol^?1. Ru@Ni/C NPs are the next most active, whereas Ru@Fe/C NPs are almost inactive. Additionally, the as‐synthesized NPs supported on carbon black exhibit higher catalytic activity than catalysts on other conventional supports, such as SiO₂ and γ‐Al₂O₃.     

Effect of temperature on frying oils: infrared spectroscopic studies

Frying oils were studied by Fourier-transform infrared (FT-IR) spectroscopy, in the range 4,000–200 cm^?1, at different temperatures, in the liquid and solid states. The infrared spectrum at 15 °C was similar to that at 200 °C. The band at 730 cm^?1 which was assigned to the rocking mode of (–CH₂) disappeared at higher temperature because of the rotational isomerism which occurred in the oil structure. The activation energy (E _a) of the disappearing (–CH₂) band, calculated by use of the chemical dynamic method using the Arrhenius equation, is 8.45 kJ mol^?1. The enthalpy difference (ΔH) between the two rotational isomer bands of the conformational structures of the oil at 730 and 1,790 cm^?1, at different high temperatures, was also calculated, by use of the Van’t Hoff equation; the value obtained was ?10.85 kJ mol^?1.     

Activity and stability spontaneously enhanced toward ethylene polymerization by employing 2‐(1‐(2,4‐dibenzhydrylnaphthylimino)ethyl)‐6‐(1‐(arylimino)ethyl) pyridyliron(II) dichlorides

A series of 2‐(1‐(2,4‐dibenzhydrylnaphthylimino)ethyl)‐6‐(1‐(arylimino)ethyl)pyridyliron(II) complexes ( Fe1 ? Fe5 ) was synthesized and characterized. The molecular structure of the representative Fe2 was determined by single‐crystal X‐ray diffraction, revealing a distorted pseudo‐square‐pyramidal geometry around the iron center. On activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all these iron complex precatalysts performed with high activities (up to 1.58 × 10⁷ g (PE) mol^?1 (Fe) h^?1) toward ethylene polymerization, producing highly linear polyethylenes with high molecular weight and bimodal distribution, which was in accordance with high temperature ¹³C NMR, high T _m values (T _m ～130 °C) and the GPC curves of the obtained polyethylenes. Meanwhile, DFT calculation results also showed the good correlation between net charges on iron and experimental activities. Compared with previous bis(imino)pyridyliron analogues, the current iron complexes containing the benzhydrylnaphthyl groups exhibited relatively higher activities and better thermal‐stability at elevated temperatures, especially at 80 °C as the industrial operating temperature, and still showed high activities toward ethylene polymerization up to 8.57 × 10⁶ g (PE) mol^?1 (Fe) h^?1 in the presence of co‐catalyst MMAO. In addition, these iron complex precatalysts all exhibited long lifetimes. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 988–996