Stability of silver colloids as substrate for surface enhanced Raman spectroscopy detection of dipicolinic acid

Silver colloids have been commonly used as substrates for surface enhanced Raman spectroscopy (SERS). It has been shown that SERS requires partial aggregation of the silver colloids. This study evaluates factors affecting the aggregative state of the silver colloids such as the age of the silver colloids and the aggregation as a result of addition of the analyte. The silver colloids are obtained from the chemical reduction of silver nitrate by sodium borohydride. Further oxidation of the sodium borohydride solution at room temperature results in concentration changes of the resulting silver colloids. Methods of controlling the sodium borohydride depletion are presented in this paper. The analyte used is dipicolinic acid, a molecular signature of Bacillus spores.     

银纳米微球和银纳米棒自组装膜的制备及SERS研究

采用硼氢化钠还原硝酸银,用振荡器在不同转速下振荡得到单分散的银纳米微球和银纳米棒,再将银纳米微球及银纳米棒自组装于被3-氨丙基-三甲氧基硅烷(APTMS)修饰的玻璃基片上,制得了具有表面增强拉曼(SERS)活性的基底,分别以罗丹明6G(R6G)和罗丹明B(RB)为探针分子对这两种基底进行SERS活性检测,结果发现这两种基底均为较理想的SERS衬底。     

Electrochemical Behavior of Gold Nanoparticles Generated In Situ on 3‐(1‐Imidazolyl)propyl‐silsesquioxane

Gold nanoparticles of different morphologies have been synthesized on a silica‐based organic‐inorganic hybrid material for catalytic applications. The gold nanoparticles formations proceed through in situ chemical reduction of the AuCl₄^? anions previously adsorbed on 3‐(1‐imidazolyl)propyl‐silsesquioxane, which plays the role of substrate and stabilizer. Two distinct reducing agents, sodium citrate and sodium borohydride, were employed to generate gold nanoparticles of different sizes. UV‐vis diffuse reflectance as well as transmission electron microscopy were employed to evaluate the particle’s morphology. Modified carbon paste electrodes were prepared from these materials and their electrochemical behavior investigated using potassium ferrocyanide and 4‐nitrophenol as redox model compounds. Both AuNPs‐modified electrodes decreased the overpotential of 4‐nitrophenol reduction by around 90 mV compared to the unmodified electrode as evidenced by cyclic voltammetry experiment. However, the smaller diameter particles (borohydride‐reduced) produced more significant catalytic effect as a consequence of their large surface area. Regarding the sensing parameters, the sensitivity is higher for the borohydride‐reduced AuNPs while the values of limit of detection are of the same order of magnitude. Thus, the detection limit and sensitivity are 70.0±0.6 nM and 187 µA/mM for the citrate‐reduced AuNPs; and 75.0±2.2 nM and 238 µA/mM for the borohydride‐reduced AuNPs.     

New diazadi(and tri)thia‐21‐crown‐7 ethers containing 8‐hydroxyquinoline side arms

A series of macrocyclic diazadi(and tri)thiacrown ethers containing two 5‐substituent‐8‐hydroxyquinoline side arms have been synthesized from the corresponding macrocyclic diazadi(and tri)thiacrown ethers. The crown ethers were obtained by reduction of the proper macrocyclic di(and tri)thiadiamides by borane‐tetrahydrofuran or by sodium borohydride‐boron trifluoride ethyl etherate‐tetrahydrofuran. The yields for the reduction of diamides by sodium borohydride‐boron trifluoride ethyl etherate‐tetrahydrofuran were higher than those by borane‐tetrahydrofuran. The following four methods were used to prepare macrocycles bearing two 8‐hydroxyquinoline side arms: (1) Mannich reaction with 8‐hydroxyquinoline; (2) Reductive animation with 8‐hydroxyquinoline‐2‐carboxaldehyde using sodium triacetoxyborohydride as the reducing agent; (3) Cyclization of N,N'‐bis(8‐hydroxyquinolin‐2‐ylmethyl)‐1,2‐bis(2‐aminoethoxy)ethane (38) with bis(α‐chloroamide) 5 ; and ( 4 ) A step‐by‐step process wherein macrocyclic trithiadiamide 11 was reduced by lithium aluminum hydride‐tetrahydrofuran to the cyclic monoamide 36 , which smoothly reacted with 5‐chloro‐8‐hydroxyquinoline to produce monosubstituted‐macrocyclic monoamide 39 .     

Recent methodologies mediated by sodium borohydride in the reduction of different classes of compounds

Reduction is a fundamental transformation in organic synthesis. Since its discovery by Brown and co‐workers, sodium borohydride is the most frequently hydride used in reduction processes. Owing to the importance of this reagent in modern organic synthesis, the aim of this review is to highlight recent methodologies (2000–2006) mediated by sodium borohydride in the reduction of different classes of compounds. Copyright © 2006 John Wiley & Sons, Ltd.     

A Sensitive Surface‐enhanced Raman Scattering Method for Determination of Melamine with Aptamer‐modified Nanosilver Probe

The small nanosilver was prepared by the sodium borohydride procedure. The aptamer was used to modify nanosilver to obtain a nanosilver‐aptamer (AgssDNA) SERS probe for the determination of melamine. In pH 6.6 phosphate buffer solution and in the presence of NaCl, the AgssDNA probe specifically combined with melamine to release nanosilver particles that were aggregated to nanosilver clusters, which exhibited SERS effect at 240 cm^?1. When melamine concentration increased, the nanosilver clusters increased, and the SERS intensity at 240 cm^?1 increased. The increased SERS intensity ΔI_{240 cm?1} is linear to melamine concentration in the range of 6.3–403.6 μg·L^?1, with a detection limit of 1.2 μg·L^?1. This assay was applied to determination of melamine in milk, with satisfactory results.     

Silver–platinum core–shell nanoparticles for surface-enhanced Raman spectroscopy

Core–shell Ag@Pt nanoparticles have been synthesised by the means of seed-growth reaction including reduction of PtCl₄²⁻ with silver and replacing Ag atoms with Pt. Surface-enhanced Raman scattering (SERS) spectra of pyridine (which gives slightly different spectra when interacting with various metals) adsorbed on synthesised Ag@Pt clusters were measured. SERS measurements have revealed that deposition of the platinum layer causes near elimination of the spectral interferences from pyridine directly interacting with the silver core. The average SERS enhancement factor for pyridine adsorbed on the Ag@Pt clusters was estimated as equal to about 10³–10⁴, significantly higher than the SERS enhancement factor achievable on the pure platinum nanostructures. Using the silver core (instead of the previously used gold cores) allows for measurement of strong SERS spectra on the Pt covered nanostructures for the wider range of the excitation radiation. This procedure of platinum deposition was tested with various silver nanoparticles – produced with borohydride, citrate and citrate/borohydride methods – which substantially differ in size distribution. The application of formed Ag@Pt structures for obtaining intense Raman spectra for molecules adsorbed on only slightly modified platinum surfaces is discussed.     

In situ synthesis of silver nanoparticles on densely amine‐functionalized polystyrene: Highly active nanocomposite catalyst for the reduction of methylene blue

In this contribution, polystyrene (PS) bearing nitrogen‐rich ligands as chelation moieties for both Ag⁺ ions and Ag⁽⁰⁾ nanoparticles was prepared through successive chemical modifications of native PS including nitration (treatment with HNO₃/H₂SO₄), reductive amination (treatment with SnCl₂/HCl), Michael addition of methyl acrylate, and grafting of ethyelenediamine. The as‐synthesized PS derivative was further used to support silver nanoparticles through initial chelation of the silver nanoparticle ions precursor and subsequent chemical in situ reduction with sodium borohydride. Chemical structure of the PS derivatives was confirmed after each synthesis step by using complementary characterization methods including infrared and energy‐dispersive X‐ray spectroscopies, elemental analysis, X‐ray diffraction, thermogravimetric analysis, and scanning electron microscopy. The catalytic activity of the PS‐EAD/AgNP nanocomposite was demonstrated using the reduction of methylene blue to leucomethylene blue, as a model reaction. The reaction was monitored by UV‐vis spectrophotometry and achieved with an excess of sodium borohydride allowing for a pseudo‐first‐order analysis of the kinetic reaction parameters. Quantitative reduction of the methylene blue was obtained upon successive catalytic cycles with a rate constant value of 0.4016 minute^?1.     

Spectrophotometric analysis of stability of gold nanoparticles during catalytic reduction of 4-nitrophenol

Spectrophotometric monitoring of 4-nitrophenol (4-NP) reduction by sodium borohydride (NaBH₄) using gold nanoparticles (GNPs) as a catalyst has been extensively studied, but the stability of GNPs in terms of change in the surface plasmon resonance (SPR) at different temperatures has not been explored. In the present investigation, our aim was to evaluate the SPR stability of GNPs as a catalyst during the reduction of 4-NP at different elevated temperatures (i.e. 30–60 °C) and sodium borohydride concentrations. Sensitivity of this degradation process toward concentration of GNPs at a range of temperatures is also evaluated. The spectrophotometric results reveal that up to 45 °C, 12 ± 1.5 nm catalyst has a consistent optical density (OD) during the entire 4-NP reduction process, which is related to the surface integrity of catalyst atoms. As the temperature approached 50 °C, the OD gradually decreased and showed a blue shift as the reaction proceeded, which could be related to a decrease in particle size or surface dissolution of gold atoms. The present study may find application in the design of catalysts for the reduction of organic pollutants in industrial wastewater at a range of temperatures.     

A rapid and efficient method for the reduction of quinoxalines

Mono and di‐substituted alkyl and aryl quinoxalines are rapidly reduced in high yield to their respective 1,2,3,4‐tetrahydro‐derivatives by borane in THF solution. In the case of the 2,3‐di‐substituted compounds, reduction is stereoselective yielding exclusively the cis‐isomers. Sodium borohydride in acetic acid also reduces alkyl and aryl quinoxalines, but proceeds with lower yields and often produces side products. Sodium borohydride in ethanol reduces quinoxaline and 2‐methylquinoxaline in high yield; however, the reaction is very slow, whereas 2,3‐dialkyl and 2‐aryl quinoxalines are not efficiently reduced by sodium borohydride in ethanol.     

Gold nanoparticles anchored onto the magnetic poly(ionic‐liquid) polymer as robust and recoverable catalyst for reduction of Nitroarenes

Gold nanoparticles supported on poly ionic‐liquid magnetic nanoparticles (MNP@PIL@Au) were synthesized by reduction of HAuCl4 with sodium borohydride. The synthesized catalyst was characterized using by AAS, TEM, FT‐IR, EDS, TGA and XRD techniques. The performance of the synthesized catalyst was investigated in the reduction of nitroarenes with NaBH₄. The reaction was carried out for various nitroarenes in water and mild conditions with high yields. The catalyst selectivity for the reduction of nitro group in the presences of other functional groups such as halides and alkynes was fairly well. The recycling of the catalyst was done 8 times without any significant loss of its catalytic activity.     

以硼氢化钠为还原剂化学镀镍的电化学研究

采用线性电位扫描伏安法研究了以硼氢化钠为还原剂的化学镀镍体系, 考查了镀液组成及工艺条件对化学镀镍硼阴、阳极过程的影响, 结果表明: 乙酸镍和硼氢化钠含量的提高分别促进了Ni²⁺的还原反应和BH₄^-的氧化反应; 乙二胺、氢氧化钠以及添加剂硫脲、糖精钠对阴、阳极反应均有不同程度的抑制作用, 同时添加剂中的硫元素加速了镍的氧化; 升高温度有利于阴、阳极反应的进行.     

银/金纳米线阵列表面增强拉曼基底的制备及对孔雀石绿的高灵敏度检测

利用种子介导的软模板生长方法制备了金纳米线(Au NWs)阵列, 通过调节生长温度控制Au NWs阵列的形貌, 最后在经硼氢化钠(NaBH₄)清洗过的Au NWs阵列上化学沉积银纳米颗粒(Ag NPs), 制得银/金纳米线(Ag/Au NWs)阵列作为表面增强拉曼散射(SERS)基底. 选用罗丹明6G(R6G)作为拉曼探针分子测定了Ag/Au NWs阵列的SERS性能. 结果表明, Ag/Au NWs阵列作为SERS基底具有高灵敏度、 优异的信号均匀性和良好的稳定性. 使用Ag/Au NWs阵列对孔雀石绿(MG)检测的检出限可低至1×10^-8 mol/L, 线性范围为 1×10^-8~1×10^-4 mol/L. NaBH₄可以在不影响SERS性能的情况下去除Ag/Au NWs阵列上吸附的分子, 使得 SERS基底可以重复使用. 使用Ag/Au NWs阵列对湖水中的MG进行检测, 得到了可靠的回收率, 证明Ag/Au NWs 阵列在检测环境水体中的孔雀石绿上具有应用潜力.     

Synthesis and spectroscopic characterization of gold nanoparticles

Photoluminescent nanoparticles of gold with size 3, 4, 6, and 9nm are prepared by borohydride/citrate reduction in presence of polyethylene glycol (PEG)/tannic acid. The prepared nanomaterials are characterized by UV-vis spectroscopy and dynamic light scattering (DLS) technique. Intense photoluminescence (PL) is observed in nanoparticles prepared by fast reduction with borohydride in presence of PEG. A red shift of PL emission from 408 to 456nm is observed for the change of size from 4 to 6nm. Increase in PL intensity is observed for all the nanoparticles on the addition of KCl. Citrate reduced gold colloid which consists of large particles of size approximately 35nm with anisotropic shapes showing two plasmon peaks is also prepared. The anisotropy is confirmed by TEM measurement. SERS activity of this colloid is tested using glutamic acid as an adsorbate probe. Assignment of the observed bands is given.     

Size-controlled gold nanocolloids on polymer microsphere-stabilizer via interaction between functional groups and gold nanocolloids

Gold nanocolloids with the controlled diameter ranging from 5.2 to 10.7 nm were in situ prepared by reduction of gold chloride trihydrate with sodium borohydride as reductant via the interaction between the gold naocolloids and the functional groups on the surface of polymer microsphere-stabilizer. The nature of such interaction was studied in detail by X-ray photoelectron spectroscopy (XPS). The effect of the functional groups on the catalytic activity of the gold nanocolloids was preliminarily investigated with the reduction of 4-nitrophenol to 4-aminophenol in the presence of sodium borohydride as reductant.     

Magnetically Recyclable Metal–Organic Framework@Fe3O4 Composite‐Catalyzed Facile Reduction of Nitroarene Compounds in Aqueous Medium

A kind of Metal–organic framework (MOF) composite namely Cu‐BTC@Fe₃O₄ (BTC = 1,3,5‐benzenetricarboxylate) was prepared and showed good catalytic activity toward the reduction of nitroarenes. This reaction proceeded smoothly under mild reaction conditions in aqueous medium using sodium borohydride as the reduction agent, affording the corresponding anilines in good to excellent yields. In addition, the catalyst could be easily recovered with an external permanent magnet and be reused for successive six runs with slight decrease in its activity.     

Reduction of 2,3,4-substituted quinolines with sodium borohydride

1,2-Dihydroquinolines were obtained by the reduction of 3-substituted 2-methyl-4-phenylquinolines with sodium borohydride in aliphatic carboxylic acids; N-alkyl derivatives are also formed. The corresponding 1,4-dihydroquinoline was obtained in the reaction of 2-methyl-3-nitroquinolinium perchlorate with sodium borohydride.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1680–1686, December, 1991.     

Synthesis of N‐(substituted phenylcarbonylamino)‐4‐ethyl‐1,2,3,6‐tetrahydropyridines as potential nonsteroidal anti‐inflammatory agents

Fourteen novel N‐(substituted phenylcarbonylamino)‐4‐ethyl‐1,2,3,6‐tetrahydropyridines 9 were synthesized in fair to good yields. 4‐Ethylpyridine 5 reacted with O‐mesitylenesulfonylhydroxylamine (O‐MSH) 4 to furnish N‐amino‐4‐ethylpyridinium mesitylenesulfonate 6 . The reaction of 6 with substituted acid chlorides 7 gave the stable crystalline pyridinium ylides 8a‐8n . A sodium borohydride reduction of 8 in absolute ethanol furnished the target compounds N‐(substituted phenylcarbonylamino)‐4‐ethyl‐1,2,3,6‐tetrahydropyridines 9a‐9n .     

Observations on the reduction of aryl nitro groups with palladium-sodium borohydride

The reduction of aryl nitro groups by the palladium-sodium borohydride system can be controlled in some instances to give products differing from those of catalytic hydrogenation. With six equivalents of borohydride added to the catalyst 2,2′-dinitrobiphenyl formed only 2,2′-diaminobiphenyl. With added sodium hydroxide and varying amounts of borohydride and catalyst, the reduction can be controlled to give benzo[c]cinnoline, benzo[c]cinnoline 5-oxide or benzo[c]cinnoline 5,6-dioxide. In a closed system, the reagents reduce both the nitro and olefin functional groups in 6-nitro-5,8-dimethoxy-1,4-dihydro-1,4-ethano-naphthalene. In an open flask flushed with argon, the reduction is confirmed to the nitro group. Reduction of 2-chloro and 4-chloronitrobenzene with palladium-borohydride gives substantial yields of the appropriate chloroanilines. In contrast, hydrogen and palladium give aniline as the major product from each of these. These results suggest that the addition of sodium borohydride to palladium on carbon produces a reductive entity differing from that of catalytic hydrogenation.     

Poly(1,4-butyl-bis-vinylpyridinium) borohydride as a new stable and efficient reducing agent in organic synthesis

The unstable sodium borohydride is stabilized on modified poly(4-vinylpyridinium), and it is used as an efficient and regenerable polymer-supported borohydride reagent for the reduction of a variety of carbonyl compounds, such as aldehydes, ketones, α,β-unsaturated carbonyl compounds, α-diketones and acyloins, in good to excellent yields.