Enhancing the Hydrogen Evolution Reaction Activity of Platinum Electrodes in Alkaline Media Using Nickel–Iron Clusters

Herein, we demonstrate an easy way to improve the hydrogen evolution reaction (HER) activity of Pt electrodes in alkaline media by introducing Ni–Fe clusters. As a result, the overpotential needed to achieve a current density of 10 mA cm^?2 in H₂‐saturated 0.1 m KOH is reduced for the model single‐crystal electrodes down to about 70 mV. To our knowledge, these modified electrodes outperform any other reported electrocatalysts tested under similar conditions. Moreover, the influence of 1) Ni to Fe ratio, 2) cluster coverage, and 3) the nature of the alkali‐metal cations present in the electrolyte on the HER activity has been investigated. The observed catalytic performance likely originates from both the improved water dissociation at the Ni–Fe clusters and the subsequent optimal hydrogen adsorption and recombination at Pt atoms present at the Ni–Fe/Pt boundary.     

Multifunctional Active‐Center‐Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost‐effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active‐center‐transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co‐catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co‐catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm^?2 for HER and OER in alkaline medium, respectively.     

Ni3N as an Active Hydrogen Oxidation Reaction Catalyst in Alkaline Medium

Hydroxide‐exchange membrane fuel cells can potentially utilize platinum‐group‐metal (PGM)‐free electrocatalysts, offering cost and scalability advantages over more developed proton‐exchange membrane fuel cells. However, there is a lack of non‐precious electrocatalysts that are active and stable for the hydrogen oxidation reaction (HOR) relevant to hydroxide‐exchange membrane fuel cells. Here we report the discovery and development of Ni₃N as an active and robust HOR catalyst in alkaline medium. A supported version of the catalyst, Ni₃N/C, exhibits by far the highest mass activity and break‐down potential for a PGM‐free catalyst. The catalyst also exhibits Pt‐like activity for hydrogen evolution reaction (HER) in alkaline medium. Spectroscopy data reveal a downshift of the Ni d band going from Ni to Ni₃N and interfacial charge transfer from Ni₃N to the carbon support. These properties weaken the binding energy of hydrogen and oxygen species, resulting in remarkable HOR activity and stability.     

Heteroatom‐doped MoSe2 Nanosheets with Enhanced Hydrogen Evolution Kinetics for Alkaline Water Splitting

Electrochemical water splitting for hydrogen generation is a vital part for the prospect of future energy systems, however, the practical utilization relies on the development of highly active and earth‐abundant catalysts to boost the energy conversion efficiency as well as reduce the cost. Molybdenum diselenide (MoSe₂) is a promising nonprecious metal‐based electrocatalyst for hydrogen evolution reaction (HER) in acidic media, but it exhibits inferior alkaline HER kinetics in great part due to the sluggish water adsorption/dissociation process. Herein, the alkaline HER kinetics of MoSe₂ is substantially accelerated by heteroatom doping with transition metal ions. Specifically, the Ni‐doped MoSe₂ nanosheets exhibit the most impressive catalytic activity in terms of lower overpotential and larger exchange current density. The density functional theory (DFT) calculation results reveal that Ni/Co doping plays a key role in facilitating water adsorption as well as optimizing hydrogen adsorption. The present work paves a new way to the development of low‐cost and efficient electrocatalysts towards alkaline HER.     

Phosphorus Vacancies that Boost Electrocatalytic Hydrogen Evolution by Two Orders of Magnitude

Vacancy engineering is an effective strategy to manipulate the electronic structure of electrocatalysts to improve their performance, but few reports focus on phosphorus vacancies (Pv). Herein, the creation of Pv in metal phosphides and investigation of their role in alkaline electrocatalytic hydrogen evolution reaction (HER) is presented. The Pv‐modified catalyst requires a minimum onset potential of 0 mV vs. RHE, a small overpotential of 27.7 mV to achieve 10 mA cm^?2 geometric current density and a Tafel slope of 30.88 mV dec^?1, even outperforms the Pt/C benchmark (32.7 mV@10 mA cm^?2 and 30.90 mV dec^?1). This catalyst also displays superior stability up to 504 hours without any decay. Experimental analysis and density functional theory calculations suggest Pv can weaken the hybridization of Ni 3d and P 2p orbitals, enrich the electron density of Ni and P atoms nearby Pv, and facilitate H* desorption process, contributing to outstanding HER activity and facile kinetics.     

Potential‐Cycling Synthesis of Single Platinum Atoms for Efficient Hydrogen Evolution in Neutral Media

Single‐atom catalysts (SACs) have exhibited high activities for the hydrogen evolution reaction (HER) electrocatalysis in acidic or alkaline media, when they are used with binders on cathodes. However, to date, no SACs have been reported for the HER electrocatalysis in neutral media. We demonstrate a potential‐cycling method to synthesize a catalyst comprising single Pt atoms on CoP‐based nanotube arrays supported by a Ni foam, termed PtSA‐NT‐NF. This binder‐free catalyst is centimeter‐scale and scalable. It is directly used as HER cathodes, whose performances at low and high current densities in phosphate buffer solutions (pH 7.2) are comparable to and better than, respectively, those of commercial Pt/C. The Pt mass activity of PtSA‐NT‐NF is 4 times of that of Pt/C, and its electrocatalytic stability is also better than that of Pt/C. This work provides a large‐scale production strategy for binder‐free Pt SAC electrodes for efficient HER in neutral media.     

CoP nanoparticles embedded in P and N co-doped carbon as efficient bifunctional electrocatalyst for water splitting

Noble-metal-free hydrogen/oxygen evolution reaction(HER/OER) electrocatalysts, especially bifunctional electrocatalysts, are essential for overall water splitting, but their performance is impeded by many factors like poor electrical conductivity. Herein, we fabricated cobalt phosphide(Co P) nanoparticles embedded in P and N co-doped carbon(PNC) matrix(Co P@PNC) to fully realize the high activity of Co P by maximizing its conductivity. Simply a carbonization coupled phosphidation approach was utilized where Co ions and organic ligands of Co-MOF were transferred into Co P and P and N co-doped carbon. The synthesized material shows an ideal electrical conductivity, excellent HER(overpotential of-84 m V and-120 m V @10 m A cm~(-2) in acidic and alkaline medias, respectively) and OER(overpotential of 330 m V@10 m A cm~(-2) in alkaline media) performances. Further, Co P@PNC acts as a superior catalyst for both anode and cathode to catalyze overall water splitting and only requires an voltage of 1.52 V to deliver a current density of 10 m A cm~(-2), superior to the noble-metal catalysts system(Pt/C//IrO_2) and the reported noble-metal-free bifunctional electrocatalysts.     

Multifunctional Active-Center-Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost-effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active-center-transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co-catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co-catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm⁻² for HER and OER in alkaline medium, respectively.     

Surface engineering on segmented copper-iron nanowires arrays

Surface engineering that could modulate the surface shape to be endowed with the high specific surface ratio, abundant chemical dangling bonds and improved defects exposure is highly desired and needs further exploring. Here, we report a facile strategy of surface engineering on decorating the controllable segmented copper-iron nanowires arrays (Cu-Fe NWs) with their respective hydroxides. Specifically, the pristine segmented Cu-Fe NWs are firstly synthesized via sequentially electrodepositing Cu NWs and Fe NWs inside the nanochannels of anode aluminum oxide (AAO) template. Subsequently, the surface and interface of Cu-Fe NWs are wet-chemically etched, in which the metallic Cu and Fe are partially converted into Cu(OH)_x nano-fibrous roots (NFRs) and FeO(OH)_y nanoparticles (NPs), and finally decorate around the respective outer-surface of Cu NWs and Fe NWs segments. As one case of the applications in hydrogen evolution reaction (HER), our surface-modified Cu-Fe NWs exhibit improved catalytic activity compared with Fe NWs.     

Ultrafine Molybdenum Carbide Nanoparticles Composited with Carbon as a Highly Active Hydrogen‐Evolution Electrocatalyst

The replacement of platinum with non‐precious‐metal electrocatalysts with high efficiency and superior stability for the hydrogen‐evolution reaction (HER) remains a great challenge. Herein, we report the one‐step synthesis of uniform, ultrafine molybdenum carbide (Mo₂C) nanoparticles (NPs) within a carbon matrix from inexpensive starting materials (dicyanamide and ammonium molybdate). The optimized catalyst consisting of Mo₂C NPs with sizes lower than 3 nm encapsulated by ultrathin graphene shells (ca. 1–3 layers) showed superior HER activity in acidic media, with a very low onset potential of ?6 mV, a small Tafel slope of 41 mV dec^?1, and a large exchange current density of 0.179 mA cm^?2, as well as good stability during operation for 12 h. These excellent properties are similar to those of state‐of‐the‐art 20 % Pt/C and make the catalyst one of the most active acid‐stable electrocatalysts ever reported for HER.     

RuP2‐Based Catalysts with Platinum‐like Activity and Higher Durability for the Hydrogen Evolution Reaction at All pH Values

Highly active, stable, and cheap Pt‐free catalysts for the hydrogen evolution reaction (HER) are under increasing demand for future energy conversion systems. However, developing HER electrocatalysts with Pt‐like activity that can function at all pH values still remains as a great challenge. Herein, based on our theoretical predictions, we design and synthesize a novel N,P dual‐doped carbon‐encapsulated ruthenium diphosphide (RuP₂@NPC) nanoparticle electrocatalyst for HER. Electrochemical tests reveal that, compared with the Pt/C catalyst, RuP₂@NPC not only has Pt‐like HER activity with small overpotentials at 10 mA cm⁻² (38 mV in 0.5 m H₂SO₄, 57 mV in 1.0 m PBS and 52 mV in 1.0 m KOH), but demonstrates superior stability at all pH values, as well as 100 % Faradaic yields. Therefore, this work adds to the growing family of transition‐metal phosphides/heteroatom‐doped carbon heterostructures with advanced performance in HER.     

Designed Single Atom Bifunctional Electrocatalysts for Overall Water Splitting: 3d Transition Metal Atoms Doped Borophene Nanosheets

Single atom catalysts (SAC) for water splitting hold the promise of producing H₂ in a highly efficient and economical way. As the performance of SACs depends on the interaction between the adsorbate atom and supporting substrate, developing more efficient SACs with suitable substrates is of significance. In this work, inspired by the successful fabrications of borophene in experiments, we systematically study the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) activities of a series of 3d transition metal-based SACs supported by various borophene monolayers (BMs=α_sheet, α₁_sheet, and β₁_sheet borophene), TM/BMs, using density functional theory calculations and kinetic simulations. All of the TM/BMs systems exhibit superior HER performance compared to Pt with close to zero thermoneutral Gibbs free energy (ΔG_H*) of H adsorption. Furthermore, three Ni-deposited systems, namely, Ni/α_BM, Ni/α₁_BM and Ni/β₁_BM, were identified to be superior OER catalysts with remarkably reduced overpotentials. Based on these results, Ni/BMs can be expected to serve as stunning bifunctional electrocatalysts for water splitting. This work provides a guideline for developing efficient bifunctional electrocatalysts.     

General synthesis of Pt and Ni co-doped porous carbon nanofibers to boost HER performance in both acidic and alkaline solutions

It is essential to develop efficient electrocatalysts to generate hydrogen from water electrolysis for hydrogen economy. In this work, platinum(Pt) and nickel(Ni) co-doped porous carbon nanofibers(Pt/NiPCNFs) with low Pt content were prepared via an electrospinning, carbonization and galvanic replacement reaction. Because of the high electrical conductivity, abundant electrochemical active sites and synergistic effect between Pt and Ni nanoparticles, the optimized Pt/Ni-PCNFs catalyst shows an e...     

Interfacial Structure of Water as a New Descriptor of the Hydrogen Evolution Reaction

Driven by the persisting poor understanding of the sluggish kinetics of the hydrogen evolution reaction (HER) on Pt in alkaline media, a direct correlation of the interfacial water structure and activity is still yet to be established. Herein, using Pt and Pt–Ni nanoparticles we first demonstrate a strong dependence of the proton donor structure on the HER activity and pH. The structure of the first layer changes from the proton acceptors to the donors with increasing pH. In the base, the reactivity of the interfacial water varied its structure, and the activation energies of water dissociation increased in the sequence: the dangling O−H bonds < the trihedrally coordinated water < the tetrahedrally coordinated water. Moreover, optimizing the adsorption of H and OH intermediates can re-orientate the interfacial water molecules with their H atoms pointing towards the electrode surface, thereby enhancing the kinetics of HER. Our results clarified the dynamic role of the water structure at the electrode–electrolyte interface during HER and the design of highly efficient HER catalysts.     

Enhanced Electron Penetration through an Ultrathin Graphene Layer for Highly Efficient Catalysis of the Hydrogen Evolution Reaction

Major challenges encountered when trying to replace precious‐metal‐based electrocatalysts of the hydrogen evolution reaction (HER) in acidic media are related to the low efficiency and stability of non‐precious‐metal compounds. Therefore, new concepts and strategies have to be devised to develop electrocatalysts that are based on earth‐abundant materials. Herein, we report a hierarchical architecture that consists of ultrathin graphene shells (only 1–3 layers) that encapsulate a uniform CoNi nanoalloy to enhance its HER performance in acidic media. The optimized catalyst exhibits high stability and activity with an onset overpotential of almost zero versus the reversible hydrogen electrode (RHE) and an overpotential of only 142 mV at 10 mA cm^?2, which is quite close to that of commercial 40 % Pt/C catalysts. Density functional theory (DFT) calculations indicate that the ultrathin graphene shells strongly promote electron penetration from the CoNi nanoalloy to the graphene surface. With nitrogen dopants, they synergistically increase the electron density on the graphene surface, which results in superior HER activity on the graphene shells.     

Platinum/Nickel Bicarbonate Heterostructures towards Accelerated Hydrogen Evolution under Alkaline Conditions

Heterostructured nanomaterials, generally have physicochemical properties that differ from those of the individual components, and thus have potential in a wide range of applications. New platinum (Pt)/nickel bicarbonate (Ni(HCO₃)₂) heterostructures are designed for an efficient alkaline hydrogen evolution reaction (HER). Notably, the specific and mass activity of Pt in Pt/Ni(HCO₃)₂ are substantially improved compared to the bare Pt nanoparticles (NPs). The Ni(HCO₃)₂ provides abundant water adsorption/dissociation sites and modulate the electronic structure of Pt, which determine the elementary reaction kinetics of alkaline HER. The Ni(HCO₃)₂ nanoplates offer a platform for the uniform dispersion of Pt NPs, ensuring the maximum exposure of active sites. The results demonstrate that, Ni(HCO₃)₂ is an effective catalyst promoter for alkaline HER.     

Strategies for Promoting Catalytic Performance of Ru-Based Electrocatalysts towards Oxygen/Hydrogen Evolution Reaction

Ru-based materials hold great promise for substituting Pt as potential electrocatalysts toward water electrolysis. Significant progress is made in the fabrication of advanced Ru-based electrocatalysts, but an in-depth understanding of the engineering methods and induced effects is still in their early stage. Herein, we organize a review that focusing on the engineering strategies toward the substantial improvement in electrocatalytic OER and HER performance of Ru-based catalysts, including geometric structure, interface, phase, electronic structure, size, and multicomponent engineering. Subsequently, the induced enhancement in catalytic performance by these engineering strategies are also elucidated. Furthermore, some representative Ru-based electrocatalysts for the electrocatalytic HER and OER applications are also well presented. Finally, the challenges and prospects are also elaborated for the future synthesis of more effective Ru-based catalysts and boost their future application.     

The Co_3O_4 nanosheet array as support for MoS_2 as highly efficient electrocatalysts for hydrogen evolution reaction

The electrochemical hydrogen evolution reaction(HER) on a non-precious electrocatalyst in an alkaline environment is of essential importance for future renewable energy. The design of advanced electrocatalysts for HER is the most important part to reduce the cost and to enhance the efficiency of water splitting. MoS_2 is considered as one of the most promising electrocatalysts to replace the precious Pt catalyst.Herein, for the first time, we have successfully loaded MoS_2 electrocatalysts onto the Co_3O_4 nanosheet array to catalyze HER with a low onset potential of ~76 mV. The high hydrogen evolution activity of MoS_2 supported on the Co_3O_4 nanosheet array may be attributed to the increased active sites and the electronic interactions between MoS_2 and Co_3O_4.     

Electrodeposited Cobalt‐Phosphorous‐Derived Films as Competent Bifunctional Catalysts for Overall Water Splitting

One of the challenges to realize large‐scale water splitting is the lack of active and low‐cost electrocatalysts for its two half reactions: H₂ and O₂ evolution reactions (HER and OER). Herein, we report that cobalt‐phosphorous‐derived films (Co‐P) can act as bifunctional catalysts for overall water splitting. The as‐prepared Co‐P films exhibited remarkable catalytic performance for both HER and OER in alkaline media, with a current density of 10 mA cm^?2 at overpotentials of ?94 mV for HER and 345 mV for OER and Tafel slopes of 42 and 47 mV/dec, respectively. They can be employed as catalysts on both anode and cathode for overall water splitting with 100 % Faradaic efficiency, rivalling the integrated performance of Pt and IrO₂. The major composition of the as‐prepared and post‐HER films are metallic cobalt and cobalt phosphide, which partially evolved to cobalt oxide during OER.     

Ultralong PtPd Alloyed Nanowires Anchored on Graphene for Efficient Methanol Oxidation Reaction

The rational synthesis of Pt-based alloyed nanowires still remains a great challenge because of the different reduction potentials between Pt and another metal and the intrinsic feature of isotropic growth in face-centered cubic (fcc) structured Pt. In this work, PtPd alloyed nanowires with ultrahigh aspect ratio anchored on graphene (PtPd NWs/graphene) were synthesized by a facile solvothermal method without the use of any templates or surfactants. Due to the integration of ultralong PtPd nanowires and stable graphene support, PtPd NWs/graphene exhibited outstanding electrochemical activity toward methanol oxidation reaction (MOR) in comparison with pure Pt NWs/graphene and commercial Pt/C catalysts. Meanwhile, PtPd NWs/graphene had a much higher current density than Pt NWs/graphene and commercial Pt/C catalysts at a constant potential for 7200s in alkaline methanol solution. Moreover, after 1000 cycles of durability testing, PtPd NWs/graphene retained 89.2% of its initial mass activity, much superior to the 63.7% retained for commercial Pt/C.