Pd‐catalyzed ligand‐free desulfitative Heck reaction with arenesulfinic acid salts under air

Palladium‐catalyzed cross‐coupling reactions of various aryl sulfinic acid salts with a wide variety of vinyl substrates have been achieved in good to excellent yields under simple aerobic conditions at 70°C with the assistance of Cu(II) salts. The reaction can be accelerated by the combination of DMSO with THF. The reported Matsuda–Heck type coupling reactions are tolerant to the common functional groups, making these transformations as attractive alternatives to the traditional cross‐coupling approaches. Copyright © 2013 John Wiley & Sons, Ltd.     

Ligand‐free palladium‐catalyzed tandem pathways for the synthesis of 4,4‐diarylbutanones and 4,4‐diaryl‐3‐butenones under microwave conditions

Two efficient Pd‐catalyzed tandem pathways for the synthesis of 4,4‐diaryl‐2‐butanones and 4,4‐diaryl‐3‐buten‐2‐ones were elaborated. The first step in both procedures was the Heck coupling of methyl vinyl ketone (MVK) and various aryl iodides leading to 4‐aryl‐3‐buten‐2‐one with the yield of up to 92% in 1 hr. The second step performed with the same catalyst and a new portion of aryl iodide in the presence K₂CO₃ as a base produced 4,4‐diaryl‐3‐buten‐2‐ones in high yield. Reaction selectivity changed completely to saturated 4,4‐diaryl‐2‐butanones, reductive Heck products, when a tertiary amine was used instead of K₂CO₃. Due to the application of microwave irradiation (MW), the desired products were obtained in high yield in a short time (4 hr), using 0.5 mol% of the Pd (OAc)₂ catalyst without additional ligands.     

Metal‐ and Reagent‐Free Highly Selective Anodic Cross‐Coupling Reaction of Phenols

The direct oxidative cross‐coupling of phenols is a very challenging transformation, as homo‐coupling is usually strongly preferred. Electrochemical methods circumvent the use of oxidizing reagents or metal catalysts and are therefore highly attractive. Employing electrolytes with a high capacity for hydrogen bonding, such as methanol with formic acid or 1,1,1,3,3,3‐hexafluoro‐2‐propanol, a direct electrolysis in an undivided cell provides mixed 2,2′‐biphenols with high selectivity. This mild method tolerates a variety of moieties, for example, tert‐butyl groups, which are not compatible with other strong electrophilic media but vital for later catalytic applications of the formed products.     

4‐(4,6‐Dimethoxy‐1,3,5‐triazin‐2‐yl)‐4‐methylmorpholinium Toluene‐4‐sulfonate (DMT/NMM/TsO−) Universal Coupling Reagent for Synthesis in Solution

4‐(4,6‐Dimethoxy‐1,3,5‐triazin‐2‐yl)‐4‐methylmorpholinium toluene‐4‐sulfonate (DMT/NMM/TsO⁻), a representative member of the inexpensive and environmentally‐friendly N‐triazinylammonium family of sulfonates, has been found to be a very effective coupling reagent for the synthesis of amides, esters and peptides in solution. This study confirms the usefulness of DMT/NMM/TsO⁻ for peptide synthesis in solution, starting from Z‐, Fmoc‐, and Boc‐protected substrates as well as unnatural building blocks. Peptide synthesis with DMT/NMM/TsO⁻ produced high yields, with high crude product purity and low risk of racemization. In all cases, stoichiometric amounts of reagents were used and the standard synthetic procedure, without the need for time‐consuming optimization stages or expensive chromatographic purification. DMT/NMM/TsO⁻ was also found to be very useful for the synthesis of oligopeptides using a fragment coupling strategy.     

Stereospecific Pd‐Catalyzed Intermolecular C(sp3)–C(sp) Cross‐Coupling of Diarylmethyl Carbonates and Terminal Alkynes Under Base‐Free Conditions

A palladium‐catalyzed intermolecular decarboxylative C(sp³)–C(sp) coupling of diarylmethyl carbonates and terminal alkynes has been developed. The reaction proceeds smoothly under external base‐free conditions to deliver the corresponding alkynylated diarylmethanes with the liberation of CO₂ and MeOH as the sole byproducts. Moreover, enantioenriched diarylmethyl carbonates are stereospecifically converted to optically active cross‐coupling products with inversion of configuration. Thus, the stereospecific palladium catalysis can provide new and unique access to the alkynylated chiral tertiary stereocenters, which are relatively difficult to construct by conventional methods.     

Copper‐Catalyzed Aerobic Decarboxylation/Ketooxygenation of Electron‐Deficient Alkenes

A copper‐catalyzed ketooxygenation of electron‐deficient alkenes was developed. This approach combines O?H alkylation, aerobic decarboxylation, and oxygenation in one transformation. Mechanistic investigation of this reaction showed that the copper salt is responsible for both generating the amidoxyl radical and promoting aerobic decarboxylation.     

Convenient Synthesis of Alkenyl‐, Alkynyl‐, and Allenyl‐Substituted Imidazo[1,2‐a]pyridines via Palladium‐Catalyzed Cross‐Coupling Reactions

A systematic study on the Stille and Sonogashira cross‐coupling of iodinated imidazo[1,2‐a]pyridines was performed, permitting the preparation of various vinyl‐, ethynyl‐, and allenyl‐substituted derivatives. These methods are particularly valuable, given their experimental simplicity and high degree of flexibility with regard to functional groups that can be introduced in positions 3, 6, or 8 of the imidazo[1,2‐a]pyridine core. Effects concerning different substitution positions and the nature of the 2‐substituent under various reaction conditions are reported in detail for the above types of unsaturated groups introduced.     

Oxidative Cyclization Reaction of 2‐Aryl‐Substituted Cinnamates To Form Phenanthrene Carboxylates by Using MoCl5

The oxidative cyclization reaction of 2‐aryl cinnamates and derivatives thereof can be easily performed with MoCl₅ as the oxidant. This powerful reagent allows oxidative coupling reactions for which other reagents fail. The best results are obtained when the 2‐phenyl substituent of the cinnamate is equipped with two methoxy groups. Even iodo moieties in the bay region of phenanthrene are tolerated under the reaction conditions. If naphthalene moieties are involved, a rearrangement of the skeleton occurs, providing an elegant route to highly functionalized angular arenes. The cyclization is demonstrated for 15 example substrates with isolated yields of up to 99 % for the phenanthrene derivative. The broad scope of the reaction underlines the usefulness of MoCl₅ and MoCl₅/TiCl₄ in the oxidative coupling reaction.     

Synthesis and microwave‐assisted catalytic activity of novel bis‐benzimidazole salts bearing furfuryl and thenyl moieties in Heck and Suzuki cross‐coupling reactions

A mixture of bis‐benzimidazole salts ( 1–7 ), Pd(OAc)₂ and K₂CO₃ in DMF ? H₂O catalyzes, in high yield, the Suzuki and Heck cross‐coupling reactions assisted by microwave irradiation in a short time. In particular, the yields of the Heck and Suzuki reactions with aryl bromides were found to be nearly quantative. The synthesized bis‐benzimidazole salts ( 1 – 7 ) were identified by ¹H? ¹³C NMR, IR spectroscopic methods and micro analysis. Copyright © 2010 John Wiley & Sons, Ltd.     

Over‐Oxidation as the Key Step in the Mechanism of the MoCl5‐Mediated Dehydrogenative Coupling of Arenes

Molybdenum pentachloride is an unusually powerful reagent for the dehydrogenative coupling of arenes. Owing to the high reaction rate using MoCl₅, several labile moieties are tolerated in this transformation. The mechanistic course of the reaction was controversially discussed although indications for a single electron transfer as the initial step were found recently. Herein, based on a combined study including synthetic investigations, electrochemical measurements, EPR spectroscopy, DFT calculations, and mass spectrometry, we deduct a highly consistent mechanistic scenario: MoCl₅ acts as a one‐electron oxidant in the absence of TiCl₄ and as two‐electron oxidant in the presence of TiCl₄, but leads to an over‐oxidized intermediate in both cases, which protects it from side reactions. In the course of aqueous work‐up the reagent waste (Mo^III/IV species) acts as reducing agent generating the desired organic C?C coupling product.     

Synthesis of trans‐Disubstituted Alkenes by Cobalt‐Catalyzed Reductive Coupling of Terminal Alkynes with Activated Alkenes

A cobalt‐catalyzed reductive coupling of terminal alkynes, RC?CH, with activated alkenes, R′CH?CH₂, in the presence of zinc and water to give functionalized trans‐disubstituted alkenes, RCH?CHCH₂CH₂R′, is described. A variety of aromatic terminal alkynes underwent reductive coupling with activated alkenes including enones, acrylates, acrylonitrile, and vinyl sulfones in the presence of a CoCl₂/P(OMe)₃/Zn catalyst system to afford 1,2‐trans‐disubstituted alkenes with high regio‐ and stereoselectivity. Similarly, aliphatic terminal alkynes also efficiently participated in the coupling reaction with acrylates, enones, and vinyl sulfone, in the presence of the CoCl₂/P(OPh)₃/Zn system providing a mixture of 1,2‐trans‐ and 1,1‐disubstituted functionalized terminal alkene products in high yields. The scope of the reaction was also extended by the coupling of 1,3‐enynes and acetylene gas with alkenes. Furthermore, a phosphine‐free cobalt‐catalyzed reductive coupling of terminal alkynes with enones, affording 1,2‐trans‐disubstituted alkenes as the major products in a high regioisomeric ratio, is demonstrated. In the reactions, less expensive and air‐stable cobalt complexes, a mild reducing agent (Zn) and a simple hydrogen source (water) were used. A possible reaction mechanism involving a cobaltacyclopentene as the key intermediate is proposed.     

Strong Coupling and Laser Action of Ladder‐Type Oligo(p‐phenylene)s in a Microcavity

We investigate the coupling of ladder‐type quarterphenyl to the photon modes of a dielectric ZrO_x/SiO_x microcavity at ultraviolet wavelengths. For a relatively long cavity (≈10 μm) with high‐reflectivity mirrors (0.998), optically pumped laser action is demonstrated in the weak‐coupling regime. We observe single‐mode operation with a threshold of 0.4 mJ cm^?2. Strong coupling is achieved by using a short λ/2 cavity. We find pronounced anti‐crossing features of the molecular (0,0) and (0,1) vibronic transitions and the cavity mode in angle‐dependent reflectivity measurements providing Rabi splittings of (90±10) meV. All these features occur spectrally resonant to the exciton transition of ZnO demonstrating the potential of ladder‐type oligo(p‐phenylene)s for the construction of inorganic/organic hybrid microcavities.     

C‐Glycosyl Amino Acids through Hydroboration–Cross‐Coupling of exo‐Glycals and Their Application in Automated Solid‐Phase Synthesis

O‐Glycosylation is one of the most important post‐translational modifications of proteins. The attachment of carbohydrates to the peptide backbone influences the conformation as well as the solubility of the conjugates and can even be essential for binding to specific ligands in cell–cell interactions or for active transport over membranes. This makes glycopeptides an interesting class of compounds for medical applications. To enhance the long‐term availability of these molecules in vivo, the stabilization of the glycosidic bond between the amino acid residue and the carbohydrate is of interest. The described modular approach affords β‐linked C‐glycosyl amino acids by a sequence of Petasis olefination of glyconolactones, stereoselective hydroboration and a mild B‐alkyl‐Suzuki coupling reaction. The coupling products were transformed to C‐glycosyl amino acid building‐blocks suitable for solid‐phase synthesis and successfully incorporated into a partial sequence of the tumor‐associated MUC1‐glycopeptide. The resulting C‐glycopeptides are candidates for the development of long‐term stable mimics of O‐glycopeptide vaccines.     

Ligand‐Controlled α‐ and β‐Arylation of Acyclic N‐Boc Amines

The palladium‐catalyzed ligand‐controlled arylation of α‐zincated acyclic amines, obtained by directed α‐lithiation and transmetalation, is described. Whereas PtBu₃ gave rise to α‐arylated Boc‐protected amines, more flexible N‐phenylazole‐based phosphine ligands induced major β‐arylation through migrative cross‐coupling.     

Palladium catalysed tandem cyclisation–anion capture. Part 8: Cascade hydrostannylation—cyclisation–anion capture and cascade hydroboration—cyclisation–anion capture on solid phase

Up to four bonds and five stereocentres are created, in five component processes (five point diversity), utilising resin bound aryl iodides by hydroboration or hydrostannylation of alkynes, followed by cyclisation–anion capture involving Suzuki or Stille reactions. Three small libraries were prepared to validate the chemistry.     

Directing‐Group‐mediated C−H‐Alkynylations

C?C triple bonds are amongst the most versatile functional groups in synthetic chemistry. Complementary to the Sonogashira coupling the direct metal‐catalyzed alkynylation of C?H bonds has emerged as a highly promising approach in recent years. To guarantee a high regioselectivity suitable directing groups (DGs) are necessary to guide the transition metal (TM) into the right place. In this Focus Review we present the current developments in DG‐mediated C(sp²)?H and C(sp³)?H modifications with terminal alkynes under oxidative conditions and with electrophilic alkynylation reagents. We will discuss further modifications of the alkyne, in particular subsequent cyclizations to carbo‐ and heterocycles and modifications of the DG in the presence of the alkyne.     

A general synthetic route to chiral dihydroxy-9,9′-spirobifluorenes

C₂-Symmetric 9,9′-spirobifluorenes with 2,2′-, 3,3′-, and 4,4′-dihydroxyls were conveniently prepared from 1,2-dibromobenzene. The palladium-catalyzed coupling reaction of 1,2-dibromobenzene with methoxyphenylmagnesium bromide or methoxyphenylboronic acid provided methoxy substituted 2-bromobiphenyls. Lithium-bromine exchange with n-butyllithium, followed by reaction with dimethyl carbonate afforded di[2-(methoxyphenyl)phenyl]ketones as the key intermediates. A continuous ring-closure induced by a strong Lewis acid and demethylation gave dihydroxy-9,9′-spirobifluorenes. The racemic dihydroxy products were resolved by inclusion crystallization using chiral resolving reagents or separated by chiral HPLC.     

Highly selective oxidative cross‐coupling polymerization with copper(I)‐bisoxazoline catalysts

The asymmetric oxidative coupling polymerization of methyl 6,6′‐dihydroxy‐2,2′‐binaphthalene‐7‐carboxylate with the copper‐diamine catalysts under an O₂ atmosphere was carried out. As is the case with the CuCl‐2,2′‐(S)‐isopropylidenbis(4‐phenyl‐2‐oxazoline) [(S)IPhO] catalyst, a polymer with a high cross‐coupling selectivity of 96% was obtained in 71% yield, whose THF‐soluble part had a number‐average molecular weight of 4.5 × 10³. To estimate the enantioselectivity with respect to the cross‐coupling linkage in the obtained polymer, the model asymmetric oxidative cross‐coupling reaction with CuCl‐(S)IPhO was also conducted, and the products showed a 94% cross‐coupling selectivity and enantioselectivity of 31% ee (S). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6287–6294, 2005     

Copper‐catalyzed homo‐ and cross‐coupling reactions of terminal alkynes in ethyl lactate

The bio‐based chemical ethyl lactate (EL) has been discovered to be an excellent medium for the Glaser‐type homo‐ and cross‐coupling reactions of terminal alkynes. Good to excellent yields of conjugate diynes have been obtained under ligand‐free and mild heating conditions in the presence of CuI and molecular oxygen. Copyright © 2014 John Wiley & Sons, Ltd.