Ultrafast Photoinduced Energy and Electron Transfer in Multi‐Modular Donor–Acceptor Conjugates

New multi‐modular donor–acceptor conjugates featuring zinc porphyrin (ZnP), catechol‐chelated boron dipyrrin (BDP), triphenylamine (TPA) and fullerene (C₆₀), or naphthalenediimide (NDI) have been newly designed and synthesized as photosynthetic antenna and reaction‐center mimics. The X‐ray structure of triphenylamine‐BDP is also reported. The wide‐band capturing polyad revealed ultrafast energy‐transfer (k_ENT=1.0×10¹² s^?1) from the singlet excited BDP to the covalently linked ZnP owing to close proximity and favorable orientation of the entities. Introducing either fullerene or naphthalenediimide electron acceptors to the TPA‐BDP‐ZnP triad through metal–ligand axial coordination resulted in electron donor–acceptor polyads whose structures were revealed by spectroscopic, electrochemical and computational studies. Excitation of the electron donor, zinc porphyrin resulted in rapid electron‐transfer to coordinated fullerene or naphthalenediimide yielding charge separated ion‐pair species. The measured electron transfer rate constants from femtosecond transient spectral technique in non‐polar toluene were in the range of 5.0×10⁹–3.5×10¹⁰ s^?1. Stabilization of the charge‐separated state in these multi‐modular donor–acceptor polyads is also observed to certain level.     

High‐Potential Perfluorinated Phthalocyanine–Fullerene Dyads for Generation of High‐Energy Charge‐Separated States: Formation and Photoinduced Electron‐Transfer Studies

High oxidation potential perfluorinated zinc phthalocyanines (ZnF_nPcs) are synthesised and their spectroscopic, redox, and light‐induced electron‐transfer properties investigated systematically by forming donor–acceptor dyads through metal–ligand axial coordination of fullerene (C₆₀) derivatives. Absorption and fluorescence spectral studies reveal efficient binding of the pyridine‐ (Py) and phenylimidazole‐functionalised fullerene (C₆₀Im) derivatives to the zinc centre of the F_nPcs. The determined binding constants, K, in o‐dichlorobenzene for the 1:1 complexes are in the order of 10⁴ to 10⁵ M ^?1; nearly an order of magnitude higher than that observed for the dyad formed from zinc phthalocyanine (ZnPc) lacking fluorine substituents. The geometry and electronic structure of the dyads are determined by using the B3LYP/6‐31G* method. The HOMO and LUMO levels are located on the Pc and C₆₀ entities, respectively; this suggests the formation of ZnF_nPc^.+–C₆₀Im^.? and ZnF_nPc^.+–C₆₀Py^.? (n=0, 8 or 16) intra‐supramolecular charge‐separated states during electron transfer. Electrochemical studies on the ZnPc–C₆₀ dyads enable accurate determination of their oxidation and reduction potentials and the energy of the charge‐separated states. The energy of the charge‐separated state for dyads composed of ZnF_nPc is higher than that of normal ZnPc–C₆₀ dyads and reveals their significance in harvesting higher amounts of light energy. Evidence for charge separation in the dyads is secured from femtosecond transient absorption studies in nonpolar toluene. Kinetic evaluation of the cation and anion radical ion peaks reveals ultrafast charge separation and charge recombination in dyads composed of perfluorinated phthalocyanine and fullerene; this implies their significance in solar‐energy harvesting and optoelectronic device building applications.     

Energy Transfer at the Single‐Molecule Level: Synthesis of a Donor–Acceptor Dyad from Perylene and Terrylene Diimides

In 2004, we reported single‐pair fluorescence resonance energy transfer (spFRET), based on a perylene diimide (PDI) and terrylene diimide (TDI) dyad ( 1 ) that was bridged by a rigid substituted para‐terphenyl spacer. Since then, several further single‐molecule‐level investigations on this specific compound have been performed. Herein, we focus on the synthesis of this dyad and the different approaches that can be employed. An optimized reaction pathway was chosen, considering the solubilities, reactivities, and accessibilities of the building blocks for each individual reaction whilst still using established synthetic techniques, including imidization, Suzuki coupling, and cyclization reactions. The key differentiating consideration in this approach to the synthesis of dyad 1 is the introduction of functional groups in a nonsymmetrical manner onto either the perylene diimide or the terrylene diimide by using imidization reactions. Combined with well‐defined purification conditions, this modified approach allows dyad 1 to be obtained in reasonable quantities in good yield.     

Charge‐Transfer Interactions in Tris‐Donor–Tris‐Acceptor Hexaarylbenzene Redox Chromophores

Symmetric‐ and asymmetric hexaarylbenzenes (HABs), each substituted with three electron‐donor triarylamine redox centers and three electron‐acceptor triarylborane redox centers, were synthesized by cobalt‐catalyzed cyclotrimerization, thereby forming compounds with six‐ and four donor–acceptor interactions, respectively. The electrochemical‐ and photophysical properties of these systems were investigated by cyclovoltammetry (CV), as well as by absorption‐ and fluorescence spectroscopy, and compared to a HAB that only contained one neighboring donor–acceptor pair. CV measurements of the asymmetric HAB show three oxidation peaks and three reduction peaks, whose peak‐separation is greatly influenced by the conducting salt, owing to ion‐pairing and shielding effects. Consequently, the peak‐separations cannot be interpreted in terms of the electronic couplings in the generated mixed‐valence species. Transient‐absorption spectra, fluorescence‐solvatochromism, and absorption spectra show that charge‐transfer states from the amine‐ to the boron centers are generated after optical excitation. The electronic donor–acceptor interactions are weak because the charge transfer has to occur predominantly through space. Moreover, the excitation energy of the localized excited charge‐transfer states can be redistributed between the aryl substituents of these multidimensional chromophores within the fluorescence lifetime (about 60 ns). This result was confirmed by steady‐state fluorescence‐anisotropy measurements, which further indicated symmetry‐breaking in the superficially symmetric HAB. Adding fluoride ions causes the boron centers to lose their accepting ability owing to complexation. Consequently, the charge‐transfer character in the donor–acceptor chromophores vanishes, as observed in both the absorption‐ and fluorescence spectra. However, the ability of the boron center as a fluoride sensor is strongly influenced by the moisture content of the solvent, possibly owing to the formation of hydrogen‐bonding interactions between water molecules and the fluoride anions.     

Photoinduced Electron Transfer within a Zinc Porphyrin–Cyclobis(paraquat‐p‐phenylene) Donor–Acceptor Dyad

Understanding the mechanism of efficient photoinduced electron‐transfer processes is essential for developing molecular systems for artificial photosynthesis. Towards this goal, we describe the synthesis of a donor–acceptor dyad comprising a zinc porphyrin donor and a tetracationic cyclobis(paraquat‐p‐phenylene) (CBPQT⁴⁺) acceptor. The X‐ray crystal structure of the dyad reveals the formation of a dimeric motif through the intermolecular coordination between the triazole nitrogen and the central Zn metal of two adjacent units of the dyad. Photoinduced electron transfer within the dyad in MeCN was investigated by femtosecond and nanosecond transient absorption spectroscopy, as well as by transient EPR spectroscopy. Photoexcitation of the dyad produced a weakly coupled ZnP^+.–CBPQT^3+. spin‐correlated radical‐ion pair having a τ=146 ns lifetime and a spin–spin exchange interaction of only 0.23 mT. The long radical‐ion‐pair lifetime results from weak donor–acceptor electronic coupling as a consequence of having nine bonds between the donor and the acceptor, and the reduction in reorganization energy for electron transfer caused by charge dispersal over both paraquat units within CBPQT^3+..     

Charge‐Assisted Halogen Bonding: Donor–Acceptor Complexes with Variable Ionicity

Charge‐assisted halogen bonding is unambiguously revealed from structural and electronic investigations of a series of isostructural charge‐transfer complexes derived from iodinated tetrathiafulvalene and tetracyanoquinodimethane derivatives, (EDT‐TTFI₂)₂(TCNQF_n), n=0–2, which exhibit variable degrees of ionicity. The iodinated tetrathiafulvalene derivative, EDT‐TTFI₂, associates with tetracyanoquinodimethane (TCNQ) and its derivatives of increasing reduction potential (TCNQF, TCNQF₂) through highly directional C? I???N≡C halogen‐bond interactions. With the less oxidizing TCNQ acceptor, a neutral and insulating charge‐transfer complex is isolated whereas with the more oxidizing TCNQF₂ acceptor, an ionic, highly conducting charge‐transfer salt is found, both of 2:1 stoichiometry and isostructural with the intermediate TCNQF complex, in which a neutral–ionic conversion takes place upon cooling. A correlation between the degree of charge transfer and the C? I???N≡C halogen‐bond strength is established from the comparison of the structures of the three isostructural complexes at temperatures from 300 to 20 K, thus demonstrating the importance of electrostatics in the halogen‐bonding interaction. The neutral–ionic conversion in (EDT‐TTFI₂)₂(TCNQF) is further investigated through the temperature dependence of its magnetic susceptibility and the stretching modes of the C≡N groups.     

GaCl3‐Mediated Reactions of Donor–Acceptor Cyclopropanes with Aromatic Aldehydes

A new strategy for cascade assembly of substituted indenes and polycyclic lactones based on reactions of donor–acceptor cyclopropanes and styrylmalonates with aromatic aldehydes in the presence of GaCl₃ has been developed. The use of GaCl₃ makes it possible to principally change the direction of the reaction known in this series of substrates and to perform the process in a multicomponent version. Generation of formal 1,2‐zwitterionic intermediates owing to complexation of dicarboxylate groups with GaCl₃ is the driving force of the reactions discovered. This method makes it possible to assemble indenylmalonates or indano[1′,2′:2,3]indano[2,1‐b]furan‐2‐ones in one synthetic stage from readily available starting compounds with high regio‐ and diastereoselectivity. A mechanism of the reactions has been suggested using the ¹⁸O label in benzaldehyde.     

Donor–Acceptor Oligoimides for Application in High‐Performance Electrical Memory Devices

Two new oligoimides, OI(APAP-6FDA) and OI(APAN-6FDA) , which consisted of electron‐donating N‐(4‐aminophenyl)‐N‐phenyl‐1‐aminopyrene ( APAP ) or N‐(4‐aminophenyl)‐N‐phenyl‐1‐aminonaphthalene ( APAN ) moieties and electron‐accepting 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride ( 6FDA ) moieties, were designed and synthesized for application in electrical memory devices. Such devices, with the indium tin oxide (ITO)/oligoimide/Al configuration, showed memory characteristics, from high‐conductance Ohmic current flow to negative differential resistance (NDR), with corresponding film thicknesses of 38 and 48 nm, respectively. The 48 nm oligoimide film device exhibited NDR electrical behavior, which resulted from the diffusion of Al atoms into the oligoimide layer. On further increasing the film thickness to 85 nm, the OI(APAP-6FDA) film device showed a reproducible nonvolatile “write once read many” (WORM) property with a high ON/OFF current ratio (more than ×10⁴). On the other hand, the device that was based on the 85 nm OI(APAN-6FDA) film exhibited a volatile static random access memory (SRAM) property. The longer conjugation length of the pyrene unit compared to that of a naphthalene unit was considered to be responsible for the different memory characteristics between these two oligoimides. These experimental results suggested that tunable switching behavior could be achieved through an appropriate design of the donor–acceptor oligoimide structure and controllable thickness of the active memory layer.     

Synthesis and Photophysical Properties of a Sc3N@C80‐Corrole Electron Donor–Acceptor Conjugate

Embedding endohdedral metallofullerenes (EMFs) into electron donor–acceptor systems is still a challenging task owing to their limited quantities and their still largely unexplored chemical properties. In this study, we have performed a 1,3‐dipolar cycloaddition reaction of a corrole‐based precursor with Sc₃N@C₈₀ to regioselectively form a [5,6]‐adduct ( 1 ). The successful attachment of the corrole moiety was confirmed by mass spectrometry. In the electronic ground state, absorption spectra suggest sizeable electronic communications between the electron acceptor and the electron donor. Moreover, the addition pattern occurring at a [5,6]‐bond junction is firmly proven by NMR spectroscopy and electrochemical investigations performed with 1 . In the electronically excited state, which is probed in photophysical assays with 1 , a fast electron‐transfer yields the radical ion pair state consisting of the one‐electron‐reduced Sc₃N@C₈₀ and of the one‐electron‐oxidized corrole upon its exclusive photoexcitation. As such, our results shed new light on the practical work utilizing EMFs as building blocks in photovoltaics.     

Photoinduced Charge Separation in a Donor–Spacer–Acceptor Dyad with N‐Annulated Perylene Donor and Methylviologen Acceptor

The first donor–acceptor species in which a strongly emissive N‐annulated perylene dye is connected to a methylviologen electron acceptor unit via its macrocyclic nitrogen atom, is prepared by a stepwise, modular procedure. The absorption spectra, redox behavior, spectroelectrochemistry and photophysical properties of this dyad and of its model species are investigated, also by pump–probe fs transient absorption spectroscopy. Photoinduced oxidative electron transfer from the excited state of the dyad, centered on the N‐annulated perylene subunit, to the appended methyviologen electron acceptor takes place in a few ps. The charge‐separated species recombines in 19 ps. Our results indicate that N‐annulated perylene can be connected to functional units by taking advantage of the macrocyclic nitrogen, an option never used until now, without losing their properties, so opening the way to new designing approaches.     

Stereospecific Reactions of Donor–Acceptor Cyclopropanes with Thioketones: Access to Highly Substituted Tetrahydrothiophenes

Lewis‐acid‐catalyzed reactions of 2‐substituted cyclopropane 1,1‐dicarboxylates with thioketones are described. Highly substituted tetrahydrothiophenes with two adjacent quaternary carbon atoms were obtained in a stereospecific manner under mild conditions and in high yield when using AlCl₃ as Lewis acid. Moreover, an intramolecular approach was successfully implemented to gain access to sulfur‐bridged [n .2.1] bicyclic ring systems. Conversion of selenoketones, the heavier analogues, under similar conditions resulted in the formation of various tetrahydroselenophenes.     

Synthesis of Alternating Donor–Acceptor Ladder‐Type Molecules and Investigation of Their Multiple Charge‐Transfer Pathways

We describe the synthesis as well as the optical and charge‐transport properties of a series of donor–acceptor (D‐A) ladder‐type heteroacenes. These molecules are stable, soluble, and contain up to 24 fused rings. Structural analyses indicated that the backbones of S 10r and Se 10r are bent in single crystals. The three 10‐ring heteroacenes were functionalized with thiol anchoring groups and used for single‐molecular conductance measurements. The highest conductance was observed for molecular wires containing a benzoselenadiazole (BSD) moiety, which exhibits the narrowest band gap. Multiple charge‐transport pathways were observed in molecular wires containing either benzothiadiazole (BTD) or BSD. The conductance is a complex function of both energy gap and orbital alignment.     

Molecular Design of Thermally Activated Delayed‐Fluorescent Emitters Using 2,2′‐Bipyrimidine as the Acceptor in Donor–Acceptor Structures

Donor–acceptor–donor (D–A–D)‐type thermally activated delayed fluorescence (TADF) emitters 5,5′‐bis{4‐[9,9‐dimethylacridin‐10(9H )‐yl]phenyl}‐2,2′‐bipyrimidine (Ac‐bpm) and 5,5′‐bis[4‐(10H ‐phenoxazin‐10‐yl)phenyl]‐2,2′‐bipyrimidine (Px‐bpm), based on the 2,2′‐bipyrimidine accepting unit, were developed and their TADF devices were fabricated. The orthogonal geometry between the donor unit and the 2,2′‐bipyrimidine accepting core facilitated a HOMO/LUMO spatial separation, thus realizing thermally activated delayed fluorescence. The exhibited electroluminescence ranged from green to yellow, depending on the donor unit, with maximum external quantum efficiencies of up to 17.1 %.     

Modulating Photo‐ and Electroluminescence in a Stimuli‐Responsive π‐Conjugated Donor–Acceptor Molecular System

Functional organic materials that display reversible changes in fluorescence in response to external stimuli are of immense interest owing to their potential applications in sensors, probes, and security links. While earlier studies mainly focused on changes in photoluminescence (PL) color in response to external stimuli, stimuli‐responsive electroluminescence (EL) has not yet been explored for color‐tunable emitters in organic light‐emitting diodes (OLEDs). Here a stimuli‐responsive fluorophoric molecular system is reported that is capable of switching its emission color between green and orange in the solid state upon grinding, heating, and exposure to chemical vapor. A mechanistic study combining X‐ray diffraction analysis and quantum chemical calculations reveals that the tunable green/orange emissions originate from the fluorophore's alternating excited‐state conformers formed in the crystalline and amorphous phases. By taking advantage of this stimuli‐responsive fluorescence behavior, two‐color emissive OLEDs were produced using the same fluorophore in different solid phases.     

Extended Conjugated Donor–Acceptor Molecules with E‐(1,2‐Difluorovinyl) and Diketopyrrolopyrrole (DPP) Moieties toward High‐Performance Ambipolar Organic Semiconductors

Two diketopyrrolopyrrole (DPP)‐based donor–acceptor (D–A) conjugated molecules, DPP‐F and DPP‐2F, which contain E‐(1,2‐difluorovinyl) moieties, are reported. The LUMO energies of DPP‐F and DPP‐2F were estimated to be ?3.49 and ?3.70 eV, respectively, based on their redox potentials and absorption spectral data; these values were clearly lowered because of the incorporation of electron‐withdrawing E‐(1,2‐difluorovinyl) moieties. Organic field‐effect transistors (OFETs) with thin films of DPP‐F and DPP‐2F were successfully fabricated with conventional techniques. Based on the respective transfer and output characteristics measured in an inert atmosphere, thin films of DPP‐2F display ambipolar semiconducting behavior with hole and electron mobilities reaching 0.42 and 0.80 cm² V^?1 s^?1, respectively. The as‐prepared OFET of DPP‐2F already shows high hole and electron mobilities that are not influenced remarkably by thermal annealing. For thin films of DPP‐F, only p‐type semiconducting behavior was observed in both an inert atmosphere and air, and the hole mobility increased to 0.1 cm² V^?1 s^?1 after thermal annealing. XRD and AFM studies were performed with thin films of DPP‐F and DPP‐2F after annealing at different temperatures.     

Reactions of Donor–Acceptor Cyclopropanes with Naphthoquinones: Redox and Lewis Acid Catalysis Working in Concert

Reactions of 2‐arylcyclopropane dicarboxylates with naphthoquinones are reported. The key feature was the use of catalytic amounts of SnCl₂, which acts as both an electron donor and a Lewis acid. By an in situ umpolung of naphthoquinone the formerly electrophilic species is converted into a nucleophile that is able to trigger the ring‐opening of the three‐membered ring with formation of a new C−C bond. Treatment of these products with base under oxidative conditions resulted—through loss of methyl formate—in cyclopentannulated products with fully conjugated π systems exhibiting intensive absorptions in the visible range.     

Charge Separation in Graphene‐Decorated Multimodular Tris(pyrene)–Subphthalocyanine–Fullerene Donor–Acceptor Hybrids

A new approach to probe the effect of graphene on photochemical charge separation in donor–acceptor conjugates is devised. For this, multimodular donor–acceptor conjugates, composed of three molecules of pyrene, a subphthalocyanine, and a fullerene C₆₀ ((Pyr)₃SubPc‐C₆₀), have been synthesized and characterized. These systems were hybridized on few‐layer graphene through π–π stacking interactions of the three pyrene moieties. The hybrids were characterized using Raman, HRTEM, and spectroscopic and electrochemical techniques. The energy levels of the donor–acceptor conjugates were fine‐tuned upon interaction with graphene and photoinduced charge separation in the absence and presence of graphene was studied by femtosecond transient absorption spectroscopy. Accelerated charge separation and recombination was detected in these graphene‐decorated conjugates suggesting that they could be used as materials for fast‐responding optoelectronic devices and in light energy harvesting applications.     

(3+3)‐Annulation of Donor–Acceptor Cyclopropanes with Diaziridines

The first example of (3+3)‐annulation of two different three‐membered rings is reported herein. Donor‐acceptor cyclopropanes in reaction with diaziridines were found to afford perhydropyridazine derivatives in high yields and diastereoselectivity under mild Lewis acid catalysis. The disclosed reaction is applicable for the broad substrate scope and exhibits an excellent functional group tolerance.