Synthesis and Characterization of 11‐Amino‐3‐methoxy‐8‐substituted‐12‐aryl‐8,9‐dihydro‐7H‐chromeno[2,3‐b]quinolin‐10(12H)‐one Derivatives

A series of 2‐amino‐7‐methoxy‐4‐aryl‐4H‐chromene‐3‐carbonitrile compounds 2 were obtained by condensation of 3‐methoxyphenol with β‐dicyanostyrenes 1 in absolute ethanol containing piperidine. The intermediate enamines 3 were prepared by compounds 2 with 5‐substituted‐1,3‐cyclohexanedione using p‐toluenesuflonic acid (TsOH) as catalyst. The title compounds 11‐amino‐3‐methoxy‐8‐substituted‐12‐aryl‐8,9‐dihydro‐7H‐chromeno[2,3‐b]quinolin‐10(12H)‐one 4 were synthesized by cyclization of the intermediate enamines 3 in THF with K₂CO₃ /Cu₂Cl₂ as catalyst. The structures of all compounds were characterized by elemental analysis, IR, MS, and ¹H NMR spectra. The crystal structure of compound 4i was determined by single‐crystal X‐ray diffraction analysis.     

Gold‐Catalyzed Oxa‐Povarov Reactions for the Synthesis of Highly Substituted Dihydrobenzopyrans from Diaryloxymethylarenes and Olefins

Oxa‐Povarov reactions involving readily available diaryloxymethylarenes and aryl‐substituted alkenes are reported. Their [4+2] cycloadditions were efficiently catalyzed by IPrAuSbF₆ (IPr=1,3‐bis(diisopropylphenyl)imidazol‐2‐ylidene) with high diastereoselectivity. Product analysis revealed that the reactions likely proceed by a stepwise ionic mechanism, because both E‐ and Z‐configured β‐methylstyrene gave the same cycloadducts in the same proportions.     

Synthesis of All‐Carbon Disubstituted Bicyclo[1.1.1]pentanes by Iron‐Catalyzed Kumada Cross‐Coupling

1,3‐Disubstituted bicyclo[1.1.1]pentanes (BCPs) are important motifs in drug design as surrogates for p‐substituted arenes and alkynes. Access to all‐carbon disubstituted BCPs via cross‐coupling has to date been limited to use of the BCP as the organometallic component, which restricts scope due to the harsh conditions typically required for the synthesis of metallated BCPs. Here we report a general method to access 1,3‐C‐disubstituted BCPs from 1‐iodo‐bicyclo[1.1.1]pentanes (iodo‐BCPs) by direct iron‐catalyzed cross‐coupling with aryl and heteroaryl Grignard reagents. This chemistry represents the first general use of iodo‐BCPs as electrophiles in cross‐coupling, and the first Kumada coupling of tertiary iodides. Benefiting from short reaction times, mild conditions, and broad scope of the coupling partners, it enables the synthesis of a wide range of 1,3‐C‐disubstituted BCPs including various drug analogues.     

Pd(0)‐Catalyzed Tandem One‐Pot Reaction of Biphenyl Ketones/Aldehydes to the Corresponding Di‐substituted Aryl Olefins

Synthesis of di‐substituted aryl olefins via a Pd(0)‐catalyzed cross‐coupling reaction of biphenyl ketones/aldehydes, tosylhydrazide, and aryl bromides (or benzyl halides) was developed. This methodology was achieved by one‐pot two‐step reactions involving the preparation of N ‐tosylhydrazones by reacting tosylhydrazide with biphenyl ketones/aldehydes, followed by coupling with aryl bromides (or benzyl halides) in the presence of Pd(PPh₃ )₄ and lithium t ‐butoxide to produce various di‐substituted aryl olefins in moderate to good yields.     

MNPs@SiO2‐Pr‐AP: A new catalyst for the synthesis of 2‐amino‐4‐aryl thiazole derivatives

A simple and efficient synthesis of 2‐amino‐4‐aryl thiazole derivatives was carried out through the reaction of substituted acetophenones and thiourea using three different types of catalytic systems including N,N,N′,N′‐tetrabromobenzene‐1,3‐disulfonamide [TBBDA], poly(N,N′‐dibromo‐N‐ethylbenzene‐1,3‐disulfonamide) [PBBS] and a combination of TBBDA and nano‐magnetic catalyst supported with functionalized 4‐amino‐pyridine silica (MNPs@SiO₂‐Pr‐AP). The results showed that the use of TBBDA along with the MNPs@SiO₂‐Pr‐AP gains the highest yields of the products in the shortest reaction time.     

Modular Synthesis of Phenanthro[9,10‐c]thiophenes by a Sequence of CH Activation,Suzuki Cross‐Coupling and Photocyclization Reactions

A total number of 15 different 3,4‐diarylthiophenes were synthesized, which bear a chlorine atom in ortho‐position of one of the aryl substituents. One aryl group was introduced by an oxidative cross‐coupling reaction, involving a C?H activation at C4(3) of the thiophene core. The other aryl group was in most cases introduced by a Suzuki cross‐coupling reaction, which succeeded the oxidative cross‐coupling step. Photocyclization reactions of the 3,4‐diarylthiophenes were performed in a solvent mixture of benzene and acetonitrile (50:50 v/v) at λ=254 nm and proceeded to the title compounds in yields of 60–82 %. The selectivity of the photocyclization was determined at the ortho‐chloro‐substituted aryl ring by the position of the chlorine substituent. At the other ring, a single regioisomer was observed for phenyl and para‐substituted phenyl groups. For 2‐naphthyl and ortho‐substituted phenyl rings a clear preference was observed in favor of a major regioisomer, while meta‐substitution in the phenyl ring led to a about 1:1 mixture of 5‐ and 7‐substituted phenanthro[9,10‐c]thiophenes. Mechanistically, the photocyclization is likely to occur as a photochemically allowed, conrotatory [(4n+2)π] process accompanied by elimination of HCl. It was shown for two phenanthro[9,10‐c]thiophene products that they can be readily brominated in positions C1 and C3 (74–77 %), which in turn allows for further functionalization at these positions, for example, in the course of halogen–metal exchange and polymerization reactions.     

Autocatalytic Carbonyl Arylation through In Situ Release of Aryl Nucleophiles from N‐Aryl‐N′‐Silyldiazenes

A method for the catalytic generation of functionalized aryl alkali metals is reported. These highly reactive intermediates are liberated from silyl‐protected aryl‐substituted diazenes by the action of Lewis basic alkali metal silanolates, resulting in desilylation and loss of N₂. Catalytic quantities of these Lewis bases initiate the transfer of the aryl nucleophile from the diazene to carbonyl and carboxyl compounds with superb functional‐group tolerance. The aryl alkali metal can be decorated with electrophilic substituents such as methoxycarbonyl or cyano as well as halogen groups. The synthesis of a previously unknown cyclophane‐like [4]arene macrocycle from a 1,3‐bisdiazene combined with a 1,4‐dialdehyde underlines the potential of the approach.     

Facile Synthesis and Palladium‐Catalyzed Cross‐Coupling Reactions of 2,3‐Bis(pinacolatoboryl)‐1,3‐butadiene

Treatment of 1,1‐bis(pinacolatoboryl)ethene with an excess of 1‐bromo‐1‐lithioethene gave 2,3‐bis(pinacolatoboryl)‐1,3‐butadiene in high yield. Palladium‐catalyzed cross‐coupling of the resulting diborylbutadiene with aryl iodides took place smoothly in the presence of a catalytic amount of Pd(OAc)₂/PPh₃ and aqueous KOH to give 2,3‐diaryl‐1,3‐butadienes in good yields. The coupling reaction with commercially available 4‐acetoxyphenylmethyl chloride under the same conditions followed by hydrolysis of the acetyl groups gave anolignan B in a one‐pot manner. A variety of [3]‐ to [6]dendralenes were synthesized by palladium‐catalyzed coupling of the diene or 1,1‐bis(pinacolato)borylethene with alkenyl or dienyl halides, respectively, in good yields.     

Cobalt‐Catalyzed Cross‐Coupling of Functionalized Alkylzinc Reagents with (Hetero)Aryl Halides

A combination of 10 % CoCl₂ and 20 % 2,2′‐bipyridine ligands enables cross‐coupling of functionalized primary and secondary alkylzinc reagents with various (hetero)aryl halides. Couplings with 1,3‐ and 1,4‐substituted cycloalkylzinc reagents proceeded diastereoselectively leading to functionalized heterocycles with high diastereoselectivities of up to 98:2. Furthermore, alkynyl bromides react with primary and secondary alkylzinc reagents providing the alkylated alkynes.     

Hiyama cross‐coupling reaction catalyzed by a palladium salt of 1‐benzyl‐4‐aza‐1‐azoniabicyclo[2.2.2]octane chloride under microwave irradiation

An efficient catalytic system using 1‐benzyl‐4‐aza‐1‐azoniabicyclo[2.2.2]octane chloride ((BeDABCO)₂Pd₂Cl₆) was developed for the Hiyama cross‐coupling reaction of various aryl halides with triethoxy(phenyl)silane. The substituted biaryls were produced in excellent yields in short reaction times using a catalytic amount of this catalyst in NMP at 100 °C. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of new 5‐substitutedbenzo[b]thiophene derivatives

Previous works of our group have dealt with the synthesis of 1‐(aryl)‐3‐[4‐(aryl)piperazin‐1‐yl]propane derivatives in the search for new and efficient antidepressants with a dual mode of action: serotonin reuptake inhibition and 5‐HT_1A receptor afinity [1‐4]. From these studies we concluded that the 3‐[4‐(aryl)piperazin‐1‐yl]‐1‐(benzo[b]thiophen‐3‐yl)propane derivatives led to the best results. The continuation of this research project required the preparation of some new 3‐acyl‐5‐substituted benzo[b]thiophenes with a wide variety of substituents at the 5 position, ranging from nitro to hydroxyl derivatives. To obtain these derivatives we acylated the corresponding 5‐substituted benzo[b]thiophenes when it was possible.     

Synthesis of 4‐Arylpiperazine Derivatives of Moclobemide: Potential Antidepressants with a Dual Mode of Action

Abstract

We report here the synthesis of substituted 4‐chloro‐N‐[3‐oxo‐3‐(4‐aryl‐1‐piperazinyl)‐propyl] benzamides (5–9), as potential new antidepressants, incorporating in a single molecule structural moieties related to a dual pharmacological profile: MAO‐A inhibitor and 5‐HT_1A receptor affinity.     

Rapid Access for the Synthesis of 1‐N‐Methyl‐spiro[2.3′]oxindole‐spiro[3.7″] (3″‐Aryl)‐5″‐methyl‐3″,3a″,4″,5″,6″,7″‐hexahydro‐2H‐pyrazolo[4,3‐c]pyridine‐4‐aryl‐pyrrolidines Through Sequential 1,3‐Dipolar Cycloaddition and Annulation

The 1,3‐dipolar cycloaddition of an azomethine ylide, generated from isatin and sarcosine by a decarboxylative route with various p‐substituted 3,5 bis(aryl methylidene)N‐methyl‐4‐piperidinones in refluxing methanol, proceeded regioselectively to give novel dispiroheterocycles. The product on subsequent annulation with hydrazine hydrate afforded 1‐N‐methyl‐spiro[2.3′]oxindole‐spiro[3.7″](3″‐aryl)‐5″‐methyl‐3″,3a″,4″,5″,6″,7″‐hexahydro‐2H‐pyrazolo[4,3‐c]pyridine‐4‐aryl‐pyrrolidines in good yield.     

Preparations of Saturated N‐P‐N Type Secondary Phosphine Oxides and their Applications in Cross‐Coupling Reactions

A series of cyclohexane‐1,2‐diamine ( 3a – 3d ) and benzene‐1,2‐diamine derivatives ( 3e – 3h ) were pre‐ pared. Followed by hydrolysis, the reaction of 3a – 3c with PCl₃ successfully led to the formation of cor‐ responding metastable saturated heteroatom‐substituted secondary phosphine oxides (HASPO 4a – 4c ), a tautomer of the saturated heteroatom‐substituted phosphinous acid (HAPA). Whereas ambient‐stable diamine‐coordinated palladium complexes were obtained, HAPA‐coordinated palladium complexes were not successfully synthesized. The molecular structures of HASPO 4c , Pd(OAc)₂(3a) , PdBr₂(3b) and Pd(OAc)₂(3c) and [Cu(NO₃)(3d)⁺][NO₃ ^? ] were determined by single‐crystal X‐ray diffraction method. Catalysis of in‐situ Suzuki‐Miyaura cross‐coupling reactions for aryl bromides and phenylboronic acid using diamine 3a as ancillary ligand showed that the optimized reaction condition at 60 °C is the combination of 2 mmol % 3a /3.0 mmol KOH/1.0 mL 1,4‐dioxane/1 mmol % Pd(OAc)₂. Moreover, moderate reactivity was observed when using aryl chlorides as substrates (supporting infor‐ mation). When diamine 3d was employed in Heck reaction, good tolerance of functional groups of aryl bromides were observed while using 4‐bromoanisole and styrene as substrates. The optimized condi‐ tion for Heck reaction at 100 °C is 3 mmol % 3d /3.0 mmol CsF/1.0 mL toluene/3 mmol % Pd(OAc)₂. In general, cyclohexane‐1,2‐diamine derivatives exhibited better catalytic properties than those of benzene‐1,2‐diamines.     

One‐Pot Stereoselective Synthesis of 2‐Acylaziridines and 2‐Acylpyrrolidines from N‐(Propargylic)hydroxylamines

The stereoselective direct transformation of N‐(propargylic)hydroxylamines into cis‐2‐acylaziridines was achieved by the combined use of AgBF₄ and CuCl. Copper salts were found to promote the transformation of the intermediary 4‐isoxazolines into 2‐acylaziridines and both 3‐aryl‐ and 3‐alkyl‐substituted 2‐acylaziridines could be prepared by using this method. Furthermore, subsequent 1,3‐dipolar cycloaddition of azomethine ylides that were generated in situ from the intermediary 2‐acylaziridines with maleimides was achieved in a stereoselective one‐pot procedure to afford the corresponding 2‐acylpyrrolidines, which consisted of an octahydropyrrolo[3,4‐c]pyrrole skeleton.     

Benzimidazolin‐2‐ylidene–palladium‐catalysed coupling reactions of aryl halides

The in situ prepared three‐component system Pd(OAc)₂–1,3‐dialkylbenzimidazolium chlorides ( 2a – f ) and Cs₂CO₃ catalyses, quantitatively, the Suzuki cross‐coupling of deactivated aryl chlorides and Heck coupling reactions of aryl bromide and iodide substrates. The 1,3‐dialkylbenzimidazolium salts ( 2a – f ) were characterized by conventional spectroscopic methods and elemental analysis. Copyright © 2005 John Wiley & Sons, Ltd.     

Pd‐Catalyzed Carbonylative α‐Arylation of Aryl Bromides: Scope and Mechanistic Studies

Reaction conditions for the three‐component synthesis of aryl 1,3‐diketones are reported applying the palladium‐catalyzed carbonylative α‐arylation of ketones with aryl bromides. The optimal conditions were found by using a catalytic system derived from [Pd(dba)₂] (dba=dibenzylideneacetone) as the palladium source and 1,3‐bis(diphenylphosphino)propane (DPPP) as the bidentate ligand. These transformations were run in the two‐chamber reactor, COware, applying only 1.5 equivalents of carbon monoxide generated from the CO‐releasing compound, 9‐methylfluorene‐9‐carbonyl chloride (COgen). The methodology proved adaptable to a wide variety of aryl and heteroaryl bromides leading to a diverse range of aryl 1,3‐diketones. A mechanistic investigation of this transformation relying on ³¹P and ¹³C NMR spectroscopy was undertaken to determine the possible catalytic pathway. Our results revealed that the combination of [Pd(dba)₂] and DPPP was only reactive towards 4‐bromoanisole in the presence of the sodium enolate of propiophenone suggesting that a [Pd(dppp)(enolate)] anion was initially generated before the oxidative‐addition step. Subsequent CO insertion into an [Pd(Ar)(dppp)(enolate)] species provided the 1,3‐diketone. These results indicate that a catalytic cycle, different from the classical carbonylation mechanism proposed by Heck, is operating. To investigate the effect of the dba ligand, the Pd⁰ precursor, [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)], was examined. In the presence of DPPP, and in contrast to [Pd(dba)₂], its oxidative addition with 4‐bromoanisole occurred smoothly providing the [PdBr(Ar)(dppp)] complex. After treatment with CO, the acyl complex [Pd(CO)Br(Ar)(dppp)] was generated, however, its treatment with the sodium enolate led exclusively to the acylated enol in high yield. Nevertheless, the carbonylative α‐arylation of 4‐bromoanisole with either catalytic or stoichiometric [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)] over a short reaction time, led to the 1,3‐diketone product. Because none of the acylated enol was detected, this implied that a similar mechanistic pathway is operating as that observed for the same transformation with [Pd(dba)₂] as the Pd source.     

Synthesis and Characterization of Benzochromeno[2,3‐b]tetrahydroquinolinone Derivatives

We report on a novel method for the preparation of a new series of benzochromeno[2,3‐b]tetrahydroquinolin‐1‐one derivatives. The title compounds are prepared by the 5‐substituted‐1,3 ‐cyclohexanedione and 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile or 2‐amino‐4‐aryl‐4H‐benzo[h]chromene‐3‐carbonitrile using dilute HCl, K₂CO₃, and Cu₂Cl₂ as catalysts. The method has the advantages of simple operation, high efficiency, and low toxicity. The structures of all compounds are characterized by elemental analysis, IR, MS, and ¹H NMR spectra. Two single crystals are characterized by using X‐ray diffraction.     

Design,Synthesis, and Herbicidal Activities of 3‐Aryl‐4‐substituted‐5‐[3‐(trifluoromethyl)phenoxy]‐1,2,4‐triazoles

In order to find novel bleaching herbicide lead compounds, a series of novel 3‐aryl‐4‐substituted‐5‐[3‐(trifluoromethyl)phenoxy]‐1,2,4‐triazoles were designed and synthesized by the multi‐step reactions. N‐(Arylformamido)phenylthioureas undergo ring closure in the presence of sodium hydroxide to generate 3‐aryl‐4‐substituted‐4H‐[1,2,4]triazol‐5‐thiols 1 , which reacted with methyl sulfate in the presence of K₂CO₃ to give 3‐aryl‐5‐methylsulfanyl‐4‐substituted‐4H‐[1,2,4]triazoles 2 . The target compounds 4 were synthesized by the oxidation of 2 in the presence of H₂O₂ and Na₂WO₄, followed by the substitution with 3‐(trifluoromethyl)phenol in moderate to good yields. Their structures were confirmed by IR, ¹H NMR, EI–MS, and elemental analyses. The preliminary bioassay indicated that some of them displayed moderate to good selective herbicidal activity against Brassica campestris L at the concentration of 100 µg/mL. Compounds 4c and 4i possessed 75.0% and 82.6% inhibition against Brassica campestris L at the concentration of 100 µg/mL. However, the target compounds 4 showed weak herbicidal activity against Echinochloa crus‐galli at the concentration of 100 and 10 µg/mL.     

Water and the Huisgen Cycloaddition Reaction: A Focus on Polar Contributions to the Transition State in the Reactions of Dicyano(phthalazinium)methanide with Substituted Styrenes and Benzylidene Acetones

Synthetic and kinetic studies on the 1,3‐dipolar cycloaddition reactions of dicyano(phthalazin‐2‐ium‐2‐yl)methanide ( 1 ) with some substituted styrenes and ‘benzylidene acetones’ in MeCN and H₂O containing 10 mol‐% of MeCN are reported. The kinetic data were supported by theoretical calculations. The major products from styrenes were exo‐2‐aryl‐1,2,3,10b‐tetrahydropyrrolo[2,1‐a]phthalazine‐3,3‐dicarbonitriles 3 , and, from ‘benzylidene acetones’, 1‐endo,2‐exo‐2‐acetyl‐1‐aryl‐1,2,3,10b‐tetrahydropyrrolo[2,1‐a]phthalazine‐3,3‐dicarbonitriles 7 . There was no indication that the cycloadditon transition states were more polar in the aqueous environment than in MeCN.