Toughening a Self‐Healable Supramolecular Polymer by Ionic Cluster‐Enhanced Iron‐Carboxylate Complexes

Supramolecular polymers that can heal themselves automatically usually exhibit weakness in mechanical toughness and stretchability. Here we exploit a toughening strategy for a dynamic dry supramolecular network by introducing ionic cluster‐enhanced iron‐carboxylate complexes. The resulting dry supramolecular network simultaneous exhibits tough mechanical strength, high stretchability, self‐healing ability, and processability at room temperature. The excellent performance of these distinct supramolecular polymers is attributed to the hierarchical existence of four types of dynamic combinations in the high‐density dry network, including dynamic covalent disulfide bonds, noncovalent H‐bonds, iron‐carboxylate complexes and ionic clustering interactions. The extremely facile preparation method of this self‐healing polymer offers prospects for high‐performance low‐cost material among others for coatings and wearable devices.     

Controlling Covalent Connection and Disconnection with Light

The on‐going need for feature miniaturization and the growing complexity of structures for use in nanotechnology demand the precise and controlled formation of covalent bonds at the molecular level. Such control requires the use of external stimuli that offer outstanding spatial, temporal, as well as energetic resolution. Thus, photoaddressable switches are excellent candidates for creating a system that allows reversible photocontrol over covalent chemical connection and disconnection. Here we show that the formation of covalent bonds between two reagents and their scission in the resulting product can be controlled exclusively by illumination with differently colored light. A furyl‐substituted photoswitchable diarylethene was shown to undergo a reversible Diels–Alder reaction with maleimide to afford the corresponding Diels–Alder adduct. Our system is potentially applicable in any field already relying on the benefits of reversible Diels–Alder reactions.     

Adsorption‐Driven Self‐Sorting of Dynamic Imine Libraries

Differences in adsorption among the components of complex mixtures play a role in separations, surface‐based sensing, and heterogeneous catalysis, and have been implicated in theories of the origin of life. Herein, we consider mixtures of imines and we show that if such complex mixtures are also dynamic—that is, if their components equilibrate among themselves—then they can dramatically simplify in composition during the course of column chromatography. As they travel down the column, imines continuously trade their aldehyde and amine constituents, favoring the formation of molecules with extremes of polarity at the expense of species with intermediate polarities. Iterative application of this principle leads to simplification of imine libraries containing up to 16 members into 4 major products.     

Photocontrol Over Self‐Assembled Nanostructures of π–π Stacked Dyes Supported by the Parallel Conformer of Diarylethene

Diarylethenes (DAEs) have rarely been used in the design of photoresponsive supramolecular assemblies with a well‐defined morphology transition owing to rather small structural changes upon photoisomerization. A supramolecular design based on the parallel conformation of DAEs enables the construction of photoresponsive dye assemblies that undergo remarkable nanomorphology transitions. The cooperative stacking of perylene bisimide (PBI) dyes was used to stabilize the parallel conformer of DAE through complementary hydrogen bonds. Atomic force microscopy, UV/Vis spectroscopy, and molecular modeling revealed that our DAE and PBI building blocks coassembled in nonpolar solvent to form well‐defined helical nanofibers featuring J‐type dimers of PBI dyes. Upon irradiating the coassembly solution with UV and visible light in turn, a reversible morphology change between nanofibers and nanoparticles was observed. This system involves the generation of a new self‐assembly pathway by means of photocontrol.     

Self‐Healing Supramolecular Materials Constructed by Copolymerization via Molecular Recognition of Cavitand‐Based Coordination Capsules

The repeating guest units of poly‐(R)‐ 2 were selectively encapsulated by the self‐assembled capsule poly‐ 1 possessing eight polymer side chains to form the supramolecular graft polymer (poly‐ 1 )_n?poly‐(R)‐ 2 . The encapsulation of the guest units was confirmed by ¹H NMR spectroscopy and the DOSY technique. The hydrodynamic radius of the graft polymer structure was greatly increased upon the complexation of poly‐ 1 . The supramolecular graft polymer (poly‐ 1 )_n?poly‐(R)‐ 2 was stably formed in the 1:1 host–guest ratio, which increased the glass transition temperature by more than 10 °C compared to that of poly‐ 1 . AFM visualized that (poly‐ 1 )_n?poly‐(R)‐ 2 formed the networked structure on mica. The (poly‐ 1 )_n?poly‐(R)‐ 2 gelled in 1,1,2,2‐tetrachloroethane, which led to fabrication of distinct viscoelastic materials that demonstrated self‐healing behavior in a tensile test.     

Quantification and Prediction of Imine Formation Kinetics in Aqueous Solution by Microfluidic NMR Spectroscopy

Quantitatively predicting the reactivity of dynamic covalent reaction is essential to understand and rationally design complex structures and reaction networks. Herein, the reactivity of aldehydes and amines in various rapid imine formation in aqueous solution by microfluidic NMR spectroscopy was quantified. Investigation of reaction kinetics allowed to quantify the forward rate constants k₊ by an empirical equation, of which three independent parameters were introduced as reactivity parameters of aldehydes (S_E, E) and amines (N). Furthermore, these reactivity parameters were successfully used to predict the unknown forward rate constants of imine formation. Finally, two competitive reaction networks were rationally designed based on the proposed reactivity parameters. Our work has demonstrated the capability of microfluidic NMR spectroscopy in quantifying the kinetics of label-free chemical reactions, especially rapid reactions that are complete in minutes.     

Enzymetically Regulating the Self‐Healing of Protein Hydrogels with High Healing Efficiency

Enzyme‐mediated self‐healing of dynamic covalent bond‐driven protein hydrogels was realized by the synergy of two enzymes, glucose oxidase (GOX) and catalase (CAT). The reversible covalent attachment of glutaraldehyde to lysine residues of GOX, CAT, and bovine serum albumin (BSA) led to the formation and functionalization of the self‐healing protein hydrogel system. The enzyme‐mediated protein hydrogels exhibit excellent self‐healing properties with 100 % recovery. The self‐healing process was reversible and effective with an external glucose stimulus at room temperature.     

Triterpenoid‐Based Self‐Healing Supramolecular Polymer Hydrogels Formed by Host–Guest Interactions

Pentacyclic triterpenoids, a class of naturally bioactive products having multiple functional groups, unique chiral centers, rigid skeletons, and good biocompatibility, are ideal building blocks for fabricating versatile supramolecular structures. In this research, the natural pentacyclic triterpenoid glycyrrhetinic acid (GA) was used as a guest molecule for β‐cyclodextrin (β‐CD) to form a GA/β‐CD (1:1) inclusion complex. By means of GA and β‐CD pendant groups in N,N′‐dimethylacrylamide copolymers, a supramolecular polymer hydrogel can be physically cross‐linked by host–guest interactions between GA and β‐CD moieties. Moreover, self‐healing of this hydrogel was observed and confirmed by step‐strain rheological measurements, whereby the maximum storage modulus occurred at a [GA]/[β‐CD] molar ratio of 1:1. Additionally, these polymers displayed outstanding biocompatibility. The introduction of a natural pentacyclic triterpenoid into a hydrogel system not only provides a biocompatible guest–host complementary GA/β‐CD pair, but also makes this hydrogel an attractive candidate for tissue engineering.     

Self‐Healing Behavior in a Thermo‐Mechanically Responsive Cocrystal during a Reversible Phase Transition

The molecular‐level motions of a coronene‐based supramolecular rotator are amplified into macroscopic changes of crystals by co‐assembly of coronene and TCNB (1,2,4,5‐tetracyanobenzene) into a charge‐transfer complex. The as‐prepared cocrystals show remarkable self‐healing behavior and thermo‐mechanical responses during thermally‐induced reversible single‐crystal‐to‐single‐crystal (SCSC) phase transitions. Comprehensive analysis of the microscopic observations as well as differential scanning calorimetry (DSC) measurements and crystal habits reveal that a thermally‐reduced‐rate‐dependent dynamic character exists in the phase transition. The crystallographic studies show that the global similarity of the packing patterns of both phases with local differences, such as molecular stacking sequence and orientations, should be the origin of the self‐healing behavior of these crystals.     

Polymeric Halogen‐Bond‐Based Donor Systems Showing Self‐Healing Behavior in Thin Films

The synthesis and comprehensive characterization of a systematic series of cleft‐type anion receptors imbedded into a polymeric architecture is presented. For the first time, isothermal calorimetric titrations on polymeric halogen‐bond‐based donors were exploited to evaluate the dependence of the anion affinity on different key parameters (i.e. monomeric versus polymeric receptor, halogen versus hydrogen bonding, charge assistance). The combination of these donor systems with a copolymer bearing accepting carboxylate groups led to supramolecular cross‐linked polymer networks showing excellent intrinsic self‐healing behavior. FT‐Raman spectroscopy and nano‐indentation measurements were utilized to clarify the thermally induced self‐healing mechanism based on the formation of halogen bonds. These first self‐healing materials based on halogen bonds pave the way for new applications of halogen‐bond donors in polymer and material science.     

Surface‐Assisted Self‐Assembly of a Hydrogel by Proton Diffusion

Controlling supramolecular growth at solid surfaces is of great importance to expand the scope of supramolecular materials. A dendritic benzene‐1,3,5‐tricarboxamide peptide conjugate is described in which assembly can be triggered by a pH jump. Stopped‐flow kinetics and mathematical modeling provide a quantitative understanding of the nucleation, elongation, and fragmentation behavior in solution. To assemble the molecule at a solid–liquid interface, we use proton diffusion from the bulk. The latter needs to be slower than the lag phase of nucleation to progressively grow a hydrogel outwards from the surface. Our method of surface‐assisted self‐assembly is generally applicable to other gelators, and can be used to create structured supramolecular materials.     

Reversible Control of Nanoparticle Functionalization and Physicochemical Properties by Dynamic Covalent Exchange

Existing methods for the covalent functionalization of nanoparticles rely on kinetically controlled reactions, and largely lack the sophistication of the preeminent oligonucleotide‐based noncovalent strategies. Here we report the application of dynamic covalent chemistry for the reversible modification of nanoparticle (NP) surface functionality, combining the benefits of non‐biomolecular covalent chemistry with the favorable features of equilibrium processes. A homogeneous monolayer of nanoparticle‐bound hydrazones can undergo quantitative dynamic covalent exchange. The pseudomolecular nature of the NP system allows for the in situ characterization of surface‐bound species, and real‐time tracking of the exchange reactions. Furthermore, dynamic covalent exchange offers a simple approach for reversibly switching—and subtly tuning—NP properties such as solvophilicity.     

Dynamic Expression of DNA Complexation with Self‐assembled Biomolecular Clusters

We report herein the implementation of a dynamic covalent chemistry approach to the generation of multivalent clusters for DNA recognition. We show that biomolecular clusters can be expressed in situ by a programmed self‐assembly process using chemoselective ligations. The cationic clusters are shown, by fluorescence displacement assay, gel electrophoresis and isothermal titration calorimetry, to effectively complex DNA through multivalent interactions. The reversibility of the ligation was exploited to demonstrate that template effects occur, whereby DNA imposes component selection in order to favor the most active DNA‐binding clusters. Furthermore, we show that a chemical effector can be used to trigger DNA release through component exchange reactions.     

基于氢键诱导的预组织模板的单环、双环及三环动态共价键自组装

利用氢键驱动的“之”字型芳酰胺为“引导”组分,本文报道了三个单环、双环及三环分子的动态共价键自组装。单环分子是一个四氨基衍生物,从“U”-型二醛和卟啉二胺的2+2缩合后经NaBH3CN还原制备。而双环及三环分子以刚性的三氨及四氨寡聚体为模板,从两个六组分反应制备得到。     

Shape‐Controlled Synthesis and Self‐Sorting of Covalent Organic Cage Compounds

The directional bonding approach is a powerful tool to rationally control both shape and stoichiometry of three‐dimensional objects built from rigid building blocks under dynamic covalent conditions. Co‐condensation of catechol‐functionalized tribenzotriquinacene derivatives which have 90° angles between the reactive sites and diboronic acids with bite angles of 60°, 120°, and 180°, led to the efficient formation of, respectively, bipyramidal, tetrahedral, or cubic covalent organic cage compounds in a predictable manner. Investigations on the self‐sorting of ternary mixtures containing two competitive boronic acids revealed either narcissistic or social self‐sorting depending on the stability of the segregated cages relative to feasible three‐component assemblies.     

Synthesis of a Two‐Dimensional Covalent Organic Monolayer through Dynamic Imine Chemistry at the Air/Water Interface

A two‐dimensional covalent organic monolayer was synthesized from simple aromatic triamine and dialdehyde building blocks by dynamic imine chemistry at the air/water interface (Langmuir–Blodgett method). The obtained monolayer was characterized by optical microscopy, scanning electron microscopy, and atomic force microscopy, which unambiguously confirmed the formation of a large (millimeter range), unimolecularly thin aromatic polyimine sheet. The imine‐linked chemical structure of the obtained monolayer was characterized by tip‐enhanced Raman spectroscopy, and the peak assignment was supported by spectra simulated by density functional theory. Given the modular nature and broad substrate scope of imine formation, the work reported herein opens up many new possibilities for the synthesis of customizable 2D polymers and systematic studies of their structure–property relationships.     

Hierarchical Nacre Mimetics with Synergistic Mechanical Properties by Control of Molecular Interactions in Self‐Healing Polymers

Designing the reversible interactions of biopolymers remains a grand challenge for an integral mimicry of mechanically superior biological composites. Yet, they are the key to synergistic combinations of stiffness and toughness by providing sacrificial bonds with hidden length scales. To address this challenge, dynamic polymers were designed with low glass‐transition temperature T_g and bonded by quadruple hydrogen‐bonding motifs, and subsequently assembled with high‐aspect‐ratio synthetic nanoclays to generate nacre‐mimetic films. The high dynamics and self‐healing of the polymers render transparent films with a near‐perfectly aligned structure. Varying the polymer composition allows molecular control over the mechanical properties up to very stiff and very strong films (E≈45 GPa, σ_UTS≈270 MPa). Stable crack propagation and multiple toughening mechanisms occur in situations of balanced dynamics, enabling synergistic combinations of stiffness and toughness. Excellent gas barrier properties complement the multifunctional property profile.