Plasmonic Trapping with a Gold Nanopillar

An improved ability to manipulate nanoscale objects could spur the field of nanotechnology. Optical tweezers offer the compelling advantage that manipulation is performed in a non‐invasive manner. However, traditional optical tweezers based on laser beams focused with microscope lenses face limitations due to the diffraction limit, which states that conventional lenses can focus light to spots no smaller than roughly half the wavelength. This has motivated recent work on optical trapping based on the sub‐wavelength field distributions of surface plasmon nanostructures. This approach offers the benefits of higher precision and resolution, and the possibility of large‐scale parallelization. Herein, we discuss the fundamentals of optical manipulation using surface plasmon resonance structures. We describe two important issues in plasmonic trapping: optical design and thermal management strategies. Finally, we describe a surface plasmon nanostructure, consisting of a gold nanopillar that takes these issues into consideration. It is shown to enable the trapping and rotation (manual and passive) of nanoparticles. Methods by which this concept can be extended are discussed.     

DNA‐Encoded Tuning of Geometric and Plasmonic Properties of Nanoparticles Growing from Gold Nanorod Seeds

Systematically controlling the morphology of nanoparticles, especially those growing from gold nanorod (AuNR) seeds, are underexplored; however, the AuNR and its related morphologies have shown promises in many applications. Herein we report the use of programmable DNA sequences to control AuNR overgrowth, resulting in gold nanoparticles varying from nanodumbbell to nanooctahedron, as well as shapes in between, with high yield and reproducibility. Kinetic studies revealed two representative pathways for the shape control evolving into distinct nanostructures. Furthermore, the geometric and plasmonic properties of the gold nanoparticles could be precisely controlled by adjusting the base compositions of DNA sequences or by introducing phosphorothioate modifications in the DNA. As a result, the surface plasmon resonance (SPR) peaks of the nanoparticles can be fine‐tuned in a wide range, from visible to second near‐infrared (NIR‐II) region beyond 1000 nm.     

Rapid Cationization of Gold Nanoparticles by Two‐Step Phase Transfer

Cationic gold nanoparticles offer intriguing opportunities as drug carriers and building blocks for self‐assembled systems. Despite major progress on gold nanoparticle research in general, the synthesis of cationic gold particles larger than 5 nm remains a major challenge, although these species would give a significantly larger plasmonic response compared to smaller cationic gold nanoparticles. Herein we present the first reported synthesis of cationic gold nanoparticles with tunable sizes between 8–20 nm, prepared by a rapid two‐step phase‐transfer protocol starting from simple citrate‐capped particles. These cationic particles form ordered self‐assembled structures with negatively charged biological components through electrostatic interactions.     

Metal Salt‐Induced Ferroelectric Crystalline Phase in Poly(vinylidene fluoride) Films

In this Communication, the effect of varying mass fractions (0–20 wt.‐%) of calcium chloride (CaCl₂) salt on the α‐ and β‐phase content of poly(vinylidene fluoride) (PVDF) as‐cast films were investigated. Spectral and X‐ray studies revealed the maximum ferroelectric β‐phase for the addition of 15 wt.‐% of CaCl₂ in PVDF compared to neat PVDF samples. The dense β‐phase dominant PVDF–CaCl₂ (15 wt.‐%) thick film used as a ferroelectric insulator in one‐capacitor (1C) type random access memory device exhibited a remnant polarization of 3.1 µC · cm², and is a good indication that the unoriented PVDF–CaCl₂ films can be used in electronic applications without further stretching process.

     

静电组装金纳米粒子制备局域表面等离子体共振传感膜

采用聚电解质自组装技术制备局域表面等离子体共振(LSPR)传感膜的方法, 在玻璃基片上依次沉积聚电解质PDDA, PSS和PVTC, 并通过静电吸附构建胶体金纳米粒子自组装膜形成LSPR传感膜. 利用扫描电镜对LSPR传感膜表面形貌以及膜中金纳米粒子的粒径进行了表征, 同时通过紫外-可见消光光谱对其灵敏度和渗透深度等重要参数进行检测. 研究结果表明, 所制备的LSPR传感膜粒子分布均匀、单分散性好、稳定性高、重现性好; 消光峰位对样品溶液折射率的检测灵敏度为71 nm/RIU, 相应的峰强检测灵敏度为0.21 AU/RIU, 对表面吸附层的渗透深度约为16 nm.     

Fourier Transform Surface Plasmon Resonance (FTSPR) with Gyromagnetic Plasmonic Nanorods

An unprecedented active and dynamic sensing platform based on a LSPR configuration that is modulated by using an external magnetic field is reported. Electrochemically synthesized Au/Fe/Au nanorods exhibited plasmonically active behavior through plasmonic coupling, and the middle ferromagnetic Fe block responded to a magnetic impetus, allowing the nanorods to be modulated. The shear force variation induced by the specific binding events between antigens and antibodies on the nanorod surface is used to enhance the sensitivity of detection of antigens in the plasmonics‐based sensor application. As a proof‐of‐concept, influenza A virus (HA1) was used as a target protein. The limit of detection was enhanced by two orders of magnitude compared to that of traditional LSPR sensing.     

Surfactant‐Free Nonaqueous Synthesis of Plasmonic Molybdenum Oxide Nanosheets with Enhanced Catalytic Activity for Hydrogen Generation from Ammonia Borane under Visible Light

Plasmonic materials have drawn emerging interest, especially in nontraditional semiconductor nanostructures with earth‐abundant elements and low resistive loss. However, the actualization of highly efficient catalysis in plasmonic semiconductor nanostructures is still a challenge, owing to the presence of surface‐capping agents in their synthetic procedures. To fulfill this, a facile non‐aqueous procedure was employed to prepare well‐defined molybdenum oxide nanosheets in the absence of surfactants. The obtained MoO_3‐x nanosheets display intense absorption in a wide range attributed to the localized surface plasmon resonances, which can be tuned from the visible to the near‐infrared region. Herein, we demonstrate that such plasmonic semiconductor nanostructures could be used as highly efficient catalysts that dramatically enhance the hydrogen‐generation activity of ammonia borane under visible light irradiation.     

Ferroelectric poly(vinylidene fluoride) PVDF films derived from the solutions with retainable water and controlled water loss

To obtain β‐phase dominant ferroelectric poly(vinylidene fluoride) (PVDF) homopolymer thin films on aluminum‐coated silicon substrates, the retaining and loss of water were manipulated by introducing several hydrated and hygroscopic chemicals in the precursor solutions, including aluminum nitrate nonahydrate, aluminum chloride hexahydrate, chromium nitrate nonahydrate, tetra‐n‐butylammonium chloride, and one hygroscopic but nonhydrated chemical, ammonium acetate. Their ability of retaining water during the thermal annealing of the films and the relationship between water retaining and the effects on promoting the β phase were investigated. The results showed an ideal scenario was that the added hydrated salts should be able to retain substantial amount of water during the PVDF crystallization to effectively promote the β phase but completely dehydrate or decompose at the further elevated annealing temperature in order to obtain β‐phase dominant PVDF film without substantially incorporating water and deteriorating the electrical properties. As one of the hydrated chemicals well satisfying the above requirements, Al(NO₃)₃·9H₂O, of different amounts was introduced to the PVDF precursor solutions and the optimal resulting β‐phase dominant ferroelectric PVDF thin films exhibited smooth morphology, low dielectric loss, high remnant polarization of 89 mC/m², and large effective piezoelectric coefficient d₃₃ of ?14.5 pm/V (under the clamping of the substrate). © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2410–2418, 2009     

Phase Transitions and Structures of Poly(ethylene-co-chlorotrifluoroethylene)

Poly( ethylene-co-chlorotrifluoroethylene) having 1∶ 1 molar ratio of ethylene andchlorotrifluoroethylene components( PECTFE) is widely used in cable coating industryand lining for dry boxes and chemical tanks[1 ,2 ] .This polymer has been commonlycharacterized as a semicrystalline polymer,and its structures and properties have beenwidely reported.It was originally described as a two-phase( crystalline-amorphous)material consisting of distinct amorphous and hexagonal crystal domains at room…     

Ammonia Oxidation Enhanced by Photopotential Generated by Plasmonic Excitation of a Bimetallic Electrocatalyst

We study how visible light influences the activity of an electrocatalyst composed of Au and Pt nanoparticles. The bimetallic composition imparts a dual functionality: the Pt component catalyzes the electrochemical oxidation of ammonia to liberate hydrogen and the Au component absorbs visible light by the excitation of localized surface plasmon resonances. Under visible-light excitation, this catalyst exhibits enhanced electrochemical ammonia oxidation kinetics, outperforming previously reported electrochemical schemes. We trace the enhancement to a photochemical potential resulting from electron–hole carriers generated in the electrocatalyst by plasmonic excitation. The photopotential responsible for enhanced kinetics scales linearly with the light intensity—a general design principle for eliciting superlative photoelectrochemical performance from catalysts comprised of plasmonic metals or hybrids. We also determine a photochemical conversion coefficient.     

Ferroelectric and piezoelectric properties of a quenched poly(vinylidene fluoride-trifluoroethylene) copolymer

The ferroelectric and piezoelectric properties of melt-quenched unoriented poly(vinylidene fluoride-trifluoroethylene) (73 : 27) copolymer films as a function of the number of poling cycles have been studied. The investigation revealed that quenched films exhibit a decrease in D-E hysteresis behavior as the number of poling cycles increases when the samples are poled at room temperature. Corresponding decreases in remanent polarization, Pr, as well as small increases in the coercive field, Ec, were observed as the material was subjected to successive poling cycles. The piezoelectric coefficients, d₃₁ and e₃₁, also decreased as the number of poling cycles increased. In addition, a clear reduction in the “apparent” Curie transition temperature between unpoled and poled material was observed. Preliminary evidence indicates that films quenched from the melt to below T_c do not form a stable ferroelectric crystal phase as previously believed. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2671–2679, 1997     

傅里叶变换表面等离子体共振频率对金膜表面溶液折射率响应

采用新型傅里叶变换表面等离子体共振仪（FT-SPR）,测定了NaCl、KCl和乙醇3种水溶液在不同浓度下的SPR响应值,建立了SPR响应与溶液浓度和折射率之间的定量关系R=1.53×105(n -1.3333),测定了FT-SPR 100型仪器的折射率响应常数m=1.53×105,即液体折射率每变化0.000 1,FT-SPR响应值变化为15 cm-1。 其结果为用FT-SPR直接测定液体样品的折射率提供了可能。     

The Role of Surface Nonuniformity in Controlling the Initiation of a Galvanic Replacement Reaction

The use of silver nanocrystals—asymmetrically truncated octahedrons and nanobars—characterized by a nonuniform surface as substrates for a galvanic replacement reaction was investigated. As the surfaces of these nanocrystals contain facets with a variety of different areas, shapes, and atomic arrangements, we were able to examine the roles of these parameters in different stages of the galvanic replacement reaction with HAuCl₄ (e.g., pitting, hollowing, pit closing, and pore formation), and thus obtain a deeper understanding of the reaction mechanism than is possible with silver nanocubes. We found that the most important of these parameters was the atomic arrangement, that is, whether the surface was capped by a {100} or {111} facet, and that the area and shape of the facet had essentially no effect on the initiation of the reaction. Interestingly, through the reaction with asymmetrically truncated octahedrons, we were also able to demonstrate that even when pitting occurred over a large area, this region would be sealed through a combination of atomic diffusion and deposition during the intermediate stages of the reaction. Consequently, even if pitting occurred across a large percentage of the nanocrystal surface, it was still possible to maintain the morphology of the template throughout the reaction.     

Cyclic control of the surface properties of a monolayer-functionalized electrode by the electrochemical generation of Hg nanoclusters

Hg(2+) ions are bound to a 1,4-benzenedimethanethiol (BDMT) monolayer assembled on a Au electrode. Electrochemical reduction of the Hg(2+)-BDMT monolayer to Hg(+)-BDMT (at E degrees =0.48 V) and subsequently to Hg(0)-BDMT (at E degrees =0.2 V) proceeds with electron-transfer rate constants of 8 and 11 s(-1), respectively. The Hg(0) atoms cluster into aggregates that exhibit dimensions of 30 nm to 2 microm, within a time interval of minutes. Electrochemical oxidation of the nanoclusters to Hg(+) and further oxidation to Hg(2+) ions proceeds with electron-transfer rate constants corresponding to 9 and 43 s(-1), respectively, and the redistribution of Hg(2+) on the thiolated monolayer occurs within approximately 15 s. The reduction of the Hg(2+) ions to the Hg(0) nanoclusters and their reverse electrochemical oxidation proceed without the dissolution of mercury species to the electrolyte, implying high affinities of Hg(2+), Hg(+), and Hg(0) to the thiolated monolayer. The electrochemical transformation of the Hg(2+)-thiolated monolayer to the Hg(0)-nanocluster-functionalized monolayer is characterized by electrochemical means, surface plasmon resonance (SPR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), and contact-angle measurements. The Hg(0)-nanocluster-modified surface reveals enhanced hydrophobicity (contact angle 76 degrees ) as compared to the Hg(2+)-thiolated monolayer (contact angle 57 degrees ). The hydrophobic properties of the Hg(0)-nanocluster-modified electrode are further supported by force measurements employing a hydrophobically modified AFM tip.