Micellar effects of a triazole-based cationic gemini surfactant on the rate of a nucleophilic aromatic substitution reaction

The reaction between 2,4-dinitrochlorobenzene (DNCB) and hydroxide ion was studied spectrophotometrically at 25 °C in micelles of a triazole-based cationic gemini surfactant 18-triazole-18 or micelles of the conventional cationic surfactant CTAB. Both CTAB and 18-triazole-18 accelerated this nucleophilic aromatic substitution reaction. The binding constant of the substrate to the micelle, K _S, for 18-triazole-18 (K _S=335 M⁻¹) was found to be much larger than that for CTAB (85 M⁻¹) by fitting the kinetic results with pseudophase ion-exchange (PIE) model, which suggests that DNCB binds with gemini micelles more easily than it does with CTAB micelles. It was also found that 18-triazole-18 catalytic system was in accordance with PIE model at surfactant concentrations below ca. 0.5 mM, above which the increase of viscosity and the change of micelle size with increased surfactant concentration may remarkably influence the reaction. This was quite different from the reaction catalyzed by micelles of the conventional surfactant CTAB.     

Molecular dynamics study of solubilization of cyclohexane,benzene, and phenol into mixed micelles composed of sodium dodecyl sulfate and octaethylene glycol monododecyl ether

Molecular dynamics calculations of a mixed micelle composed of sodium dodecyl sulfate (SDS) and octaethylene glycol monododecyl ether (C₁₂E₈) were performed for six compositions (SDS/C₁₂E₈ = 100/0, 80/20, 60/40, 40/60, 20/80, and 0/100) to investigate the composition dependence of the mixed micelle structure and solubilization of cyclohexane, benzene, and phenol molecules by the micelle. The radial density distribution of the hydrophilic polyoxyethylene (POE) group of C₁₂E₈ as a function of distance from the micelle center is very sharp for micelles with high SDS content because the POE group captures a Na⁺ ion in solution and wraps around it to form a compact crown-ether-like complex. The hydrophobic dodecyl groups of SDS and C₁₂E₈ were separately distributed in the mixed micelle core. ΔG(r) evaluated for each solute showed that despite the structural changes of the micelle the binding strength of the solute molecules to the micelle did not change significantly. © 2019 Wiley Periodicals, Inc.     

Distribution of the methyl radical adduct of N‐benzylidene‐1‐diethoxyphosphoryl‐1‐methylethylamine N‐oxide‐type nitrones in water–sodium dodecyl sulfate micelles: an electron paramagnetic resonance spin trapping study

The behavior of the methyl radical adduct of six β‐phosphorylated nitrones in the N‐benzylidene‐1‐diethoxyphosphoryl‐1‐methylethylamine N‐oxide series in the presence of sodium dodecyl sulfate (SDS) micelles was followed by electron paramagnetic resonance spectroscopy. Except when the highly hydrophilic trap 4‐PyOPN (2) was used, all the adducts were found to partition significantly between micelles and the bulk aqueous phase. The average correlation time τ of the exchange of spin adducts between SDS micelles and water was found to be in the range 5 × 10^?8—4 × 10^?7 s, which is in the region of the life time of an SDS monomer in the micelle structure. In each case, the adduct affinity for the micelles has been quantified by evaluating its micelle–water distribution coefficient K_d. Copyright © 2002 John Wiley & Sons, Ltd.     

Interaction of slightly cross-linked gels of poly(diallyldimethylammonium bromide) with sodium dodecyl sulfate. Diffusion of surfactant ions in gel

The dynamics of the changing microenvironment of the fluorescent probe pyrene in slightly cross-linked networks of poly(diallyldimethylmmonium bromide) during diffusion of sodium dodecyl sulfate (SDS) in the gel phase has been investigated by fluorescence spectroscopy. Values of the spectral ratio I₃/I₁ for pyrene monomer included in SDS micelles in the swollen networks fall between the corresponding values for pyrene in water and for pyrene dissolved in SDS micelles in aqueous solution. In the narrow interval of the surfactant concentrations in the gel phase, the formation of pyrene excimers is observed. The values of the critical micelle concentration in the gel phase (ca. 5 × 10^?4 to 8 × 10^?4 mol/L) are tenfold lower than in aqueous solutions of the surfactant. The effective micellar diffusion coeffecient D in the gel phase increases with increasing swelling of the network. © 1993 John Wiley & Sons, Inc.     

Solute exchange between surfactant micelles by micelle fragmentation and fusion

Stopped-flow time-scan experiments on both Triton X-100 (TX100) micelle and sodium dodecylsulfate (SDS) micelles, with the pyrene-containing triglyceride 1 as a probe, establish that there are two distinct solute exchange mechanisms with rates on the time scale of milliseconds to minutes. One process exhibits second order kinetics with a rate proportional to the concentration of empty micelles. For TX100 micelles, this process is rapid (k₂≈10⁶ M⁻¹ s⁻¹ at 24.6°C) and is characterized by an activation energy of 160 kJ mol⁻¹. From the fact that this rate is nearly independent of the structure of the probe we infer that the exchange involves micelle fusion to form a short-lived super-micelle, followed by fragmentation to form two normal (or ‘proper’) micelles. The rate of the first-order process decreases as the size of the probe increases (1-octylpyrene>1-dodecylpyrene>1). For SDS, both rates are very sensitive to the salt (NaCl) concentration. All indications point to this exchange process involving rate-limiting fragmentation of the micelle into two sub-micelles, these in turn grow back to normal micelles by addition of surfactant monomers or by collision with other sub-micelles. We explain the dependence of this rate on the nature of the probe by suggesting that only sub-micelles of a certain size are capable of carrying the probe with them as they separate from the original micelle.     

Metallo‐supramolecular block copolymer micelles: Improved preparation and characterization

Micelles prepared from amphiphilic block copolymers in which a poly(styrene) segment is connected to a poly(ethylene oxide) block via a bis‐(2,2′:6′,2″‐terpyridine‐ruthenium) complex have been intensely studied. In most cases, the micelle populations were found to be strongly heterogeneous in size because of massive micelle/micelle aggregation. In the study reported in this article we tried to improve the homogeneity of the micelle population. The variant preparation procedure developed, which is described here, was used to prepare two “protomer”‐type micelles: PS₂₀‐[Ru]‐PEO₇₀ and PS₂₀‐[Ru]‐PEO₃₇₅. The dropwise addition of water to a solution of the compounds in dimethylformamide was replaced by the controlled addition of water by a syringe pump. The resulting micelles were characterized by sedimentation velocity and sedimentation equilibrium analyses in an analytical ultracentrifuge and by transmission electron microscopy of negatively stained samples. Sedimentation analysis showed virtually unimodal size distributions, in contrast to the findings on micelles prepared previously. PS₂₀‐[Ru]‐PEO₇₀ micelles were found to have an average molar mass of 318,000 g/mol (corresponding to 53 protomers per micelle, which is distinctly less than after micelle preparation by the standard method) and an average hydrodynamic diameter (d_h) of 18 nm. For PS₂₀‐[Ru]‐PEO₃₇₅ micelles, the corresponding values were M = 603,000 g/mol (31 protomers per micelle) and d_h = 34 nm. The latter particles were found to be identical to the “equilibrium” micelles prepared in pure water. Both micelle types had a very narrow molar mass distribution but a much broader distribution of s values and thus of hydrodynamic diameters. This indicates a conformational heterogeneity that is stable on the time scale of sedimentation velocity analysis. The findings from electron microscopy were in disagreement with those from the sedimentation analysis both in average micelle diameter and in the width of the distributions, apparently because of imperfections in the staining procedure. The preparation procedure described also may be useful in micelle formation from other types of protomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4458–4465, 2004     

一个高粘弹的阴离子蠕虫胶束体系

以频率扫描和稳态剪切实验研究了140 mmol·L^-1羧酸盐gemini 表面活性剂(C₁₄Φ₂C₁₄)在100 mmol·L^-1 NaBr 条件下溶液的流变行为. 在低剪切频率时, 溶液呈现出具有单一松弛时间特性的Maxwell 流体行为.通过活的高分子模型(living polymer model)分析,C₁₄Φ₂C₁₄体系在25℃ 时形成了很长的蠕虫胶束(3.6-6.8μm). 冷冻透射电镜也观察到蠕虫胶束的形成. 这些胶束相互缠绕, 形成了很黏稠的溶液(零剪切粘度高达1.10×10⁴ Pa·s), 外观呈现胶状. 随着温度升高至70℃, 体系的相对粘度仍旧保持很高(1.8×10⁴), 这在阴离子表面活性剂蠕虫胶束溶液中是很少见的. 体系的流动活化能(E_a)约为(141±5) kJ·mol^-1. 利用动态光散射测定了C₁₄Φ₂C₁₄聚集体的尺寸分布, 证实了这个表面活性剂在5-10 mmol·L^-1的低浓度时生成了约100 nm的大聚集体, 这些大聚集体随着表面活性剂浓度的增加很容易转化成棒状直至蠕虫胶束.     

Surface charge modulation of poly(ethylene glycol)–poly( , -lactide) block copolymer micelles: conjugation of charged peptides

Block copolymer micelles with aldehyde functionality were prepared in aqueous medium by dialyzing the N,N-dimethylacetamide solution of α-acetoxy-poly(ethylene glycol)-poly( , -lactide) block copolymer (acetal-PEG–PDLLA) against water, followed by mild acid treatment to convert the acetal moiety of the micelle to the aldehyde group. Peptidyl ligands (phenylalanine (Phe) and tyrosyl–glutamic acid (Tyr–Glu)) were then chemically conjugated to the micelle through Schiff base formation and successive reductive amination using NaBH₃CN. Micelles with peptidyl ligands thus prepared have a size of approximately 40 nm with extremely narrow distribution (μ₂/ ²<0.1) based on cumulant analysis of dynamic light scattering. A maximum 53% of the PEG-chain end of the micelle could be converted into peptidyl groups. Zeta potential values of Tyr–Glu derivatized micelles were well correlated with the amount of conjugated ligands, controllable over the range of 0 to−9 mV in sodium phosphate buffer (pH 7.4, 10 mM). These micelles with peptidyl ligands may have a utility for exploring the effect of the surface charge on the pharmacokinetic behavior of particulate systems as well as for modulated drug delivery where cellular peptidyl receptors play a substantial role.     

Kinetics of the heterogeneous electron transfer reaction of triplet pyrene in micelles to Br2− radicals in aqueous solution

A combined flash photolysis and pulse radiolysis experiment was carried out to produce triplet pyrene (P) molecules in micelles of cetyltrimethylammonium bromide and Br₂^? in the surrounding aqueous medium. The reaction ³P_mic + Br → P + 2 Br^? was followed by optical absorption measurements in the 10^?8?10^?4–sec range. This reaction possesses a “fast” and a “slow” component with respective rate constants of 2.3 × 10⁶ sec^?1 and 1 × 10⁹M^?1 · sec^?1. The fast component is related to the probability of a Br₂^? radical meeting a triplet pyrene containing micelle on the first encounter (only 16% of the micelles contained a triplet molecule). Reactions involving more than one Br₂^? radical–micelle encounter are ascribed to the slow component. The presence of two components reflects the fact that the residence time of a Br₂^? radical in the vicinity of a cationic micelle is substantially longer than the diffusion time of the radical between micelles. Thus the conditions met in micellar chemistry differ dramatically from those in ordinary solution kinetics where the encounter time is generally much shorter than the time between encounters. Some considerations on the energetics of this electron transfer reaction are also presented.     

Micellar properties of a phenothiazine drug in presence of additives

In this study micellar properties of a phenothiazine drug, promazine hydrochloride, at different concentrations of NaCl and cationic surfactants (conventional as well as gemini surfactants) are presented. The parameters studied are cmc (critical micelle concentration), X ₁ (mole fraction of surfactant in micelles), f ₁, f ₂ (activity coefficients) and ΔG _ex (excess free energy). Cl⁻ ions (from NaCl) get adsorbed on the micellar head groups and, by decreasing the repulsion among them, lower the cmc. Surfactants form mixed micelles with the drug and the values of X ₁, X ₁^id (mole fraction of the surfactant in micelles in ideal state), interaction parameter β, f ₁ and f ₂ all suggest non-ideal but synergistic nature. The ΔG _ex values are negative indicating that the mixed state is more stable than the pure micelle state. The article is published in the original.     

Using the reversible addition–fragmentation chain transfer process to synthesize core‐crosslinked micelles

Poly(2‐hydroxyethyl acrylate)–poly(n‐butyl acrylate) block copolymers were synthesized with the reversible addition–fragmentation chain transfer (RAFT) process. The block copolymers were synthesized successfully with either poly(2‐hydroxyethyl acrylate) or poly(n‐butyl acrylate) macro‐RAFT agents. The resulting block copolymers had narrow molecular weight distributions (polydispersity index = 1.3–1.4). Copolymer self‐aggregation in water yielded micelles, with the hydrodynamic diameter (D_h) values of the aggregates dependent on the length of both blocks according to D_h ～ N_BA^1.17N_HEA^0.57, where N_BA is the number of repeating units of n‐butyl acrylate and N_HEA is the number of repeating units of 2‐hydroxyethyl acrylate. The micelles were subsequently stabilized via chain extension of the block copolymer with a crosslinking agent. The successful chain extension in a micellar system was confirmed by an increase in the molecular weight, which was detected with membrane osmometry. The crosslinked particles showed noticeably different aggregation behavior in diverse solvent systems. The uncrosslinked micelles formed by the block copolymer (N_HEA = 260, N_BA = 75) displayed a definite critical micelle concentration at 5.4 × 10^?4 g L^?1 in aqueous solutions. However, upon crosslinking, the critical micelle concentration transition became obscure. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2177–2194, 2006     

Comparative study of paclitaxel physically encapsulated in and chemically conjugated with PEG‐PLA

Paclitaxel‐loaded poly(ethylene glycol)‐b‐poly(l ‐lactide (LA)) (PEG‐PLA) micelles were prepared by two methods. One is physical encapsulation of paclitaxel in micelles composed of a PEG‐PLA block copolymer and the other is based on a PEG‐PLA–paclitaxel conjugate, abbreviated as “conjugate micelles”. Their physicochemical characteristics, e.g. critical micelle concentration (CMC), morphology, and micelle size distribution were then evaluated by means of fluorescence spectroscopy, scanning electron microscopy (SEM), and dynamic light scattering (DLS). The results show that the CMC of PEG‐PLA–paclitaxel and PEG‐PLA are 6.31 × 10^?4 and 1.78 × 10^?3 g L^?1, respectively. Both micelles assume a spherical shape with comparable diameters and have unimodal size distribution. Moreover, invitro drug delivery behavior was studied by high performance liquid chromatography (HPLC). The antitumor activity of the paclitaxel‐loaded micelles against human liver cancer H7402 cells was evaluated by 3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide (MTT) method. The conjugate micelles show a lower burst release during the initial stage and higher accumulative release amount of paclitaxel after a period of time while the encapsulated ones behave in the opposite way. Both the paclitaxel‐loaded micelles showed comparable anticancer efficacy with the free drug. Copyright © 2008 John Wiley & Sons, Ltd.     

Influence of Gold Nanoparticles of Varying Size in Improving the Lipase Activity within Cationic Reverse Micelles

Herein, we report the effect of gold nanoparticles (GNPs) in enhancing lipase activity in reverse micelles of cetyltrimethylammonium bromide (CTAB)/water/isooctane/n‐hexanol. The size and concentration of the nanoparticles were varied and their specific roles were assessed in detail. An overall enhancement of activity was observed in the GNP‐doped CTAB reverse micelles. The improvement in activity becomes more prominent with increasing concentration and size of the GNPs (0–52 μM and ca. 3–30 nm, respectively). The observed highest lipase activity (k₂=1070±12 cm³ g^?1 s^?1) in GNP‐doped CTAB reverse micelles ([GNP]: 52 μm, ca. 20 nm) is 2.5‐fold higher than in CTAB reverse micelles without GNPs. Improvement in the lipase activity is only specific to the GNP‐doped reverse micellar media, whereas GNP deactivates and structurally deforms the enzyme in aqueous media. The reason for this activation is probably due to the formation of larger‐sized reverse micelles in which the GNP acts as a polar core and the surfactants aggregate around the nanoparticle (‘GNP pool’) instead of only water. Lipase at the augmented interface of the GNP‐doped reverse micelle showed improved activity because of enhancement in both the substrate and enzyme concentrations and increased flexibility in the lipase conformation. The extent of the activation is greater in the case of the larger‐sized GNPs. A correlation has been established between the activity of lipase and its secondary structure by using circular dichroism and FTIR spectroscopic analysis. The generalized influence of GNP is verified in the reverse micelles of another surfactant, namely, cetyltripropylammonium bromide (CTPAB). TEM, dynamic light scattering (DLS), and UV/Vis spectroscopic analysis were utilized to characterize the GNPs and the organized aggregates. For the first time, CTAB‐based reverse micelles have been found to be an excellent host for lipase simply by doping with appropriately sized GNPs.     

Small-angle neutron scattering study of sodium cholate and sodium deoxycholate interacting micelles in aqueous medium

Small angle neutron scattering (SANS) measurements of D₂O solutions (0.1 M) of sodium cholate (NaC) and sodium deoxycholate (NaDC) were carried out atT= 298 K. Under compositions very much above the critical micelle concentration (CMC), the bile salt micelle size growths were monitored by adopting Hayter-Penfold type analysis of the scattering data. NaC and NaDC solutions show presence of correlation peaks atQ = 0.12 and 0.1 ?_-1 respectively. Monodisperse ellipsoids of the micelles produce best fits. For NaC and NaDC systems, aggregation number (9.0, 16.0), fraction of the free counterions per micelle (0.79, 0.62), semi-minor (8.0 ?) and semi-major axes (18.4, 31.7 ?) values for the micelles were deduced. Extent of micellar growth was studied using ESR correlation time measurements on a suitable probe incorporating NaC and NaDC micelles. The growth parameter (axial ratio) values were found to be 2.3 and 4.0 for NaC and NaDC systems respectively. The values agree with those of SANS.     

13C- and 1H-NMR and FTIR spectroscopic evidence for aggregate formation of organosilanes in toluene

 Changes in the ¹³C and ¹H NMR chemical shifts of the silane coupling agent (3-aminopropyltri-ethoxysilane, APTS) in toluene, which were detected as the concentration of APTS increased, have been interpreted in terms of the formation of micelles and the presence of a critical micelle concentration (CMC) equal to ca. 0.47 mol 1^-1. For the protons of the n-propyl segment, ¹H NMR splitting patterns have been analyzed and conformations of the propyl segment have been discussed. Plots of relative absorbance of the two NH₂ stretch IR bands at 3324 and 3384 cm^-1 against concentration provided an inflection point (corresponding to the CMC) at a value equal to 0.46 mol 1^-1. Thus, consideration of the interaction of APTS with a surface must take into account the presence of both APTS aggregates as well as APTS monomers. Received: 16 August 1996 Accepted: 26 September 1996     

Hierarchically organized micellization of thermoresponsive rod‐coil copolymers based on poly[oligo(ethylene glycol) methacrylate] and poly(ε‐caprolactone)

A series of amphiphilic triblock copolymers, poly[oligo(ethylene glycol) methacrylate]_x‐block‐poly(ε‐caprolactone)‐block‐poly[oligo(ethylene glycol) methacrylate]_x, POEGMA_Co(x), were synthesized. Formation of hydrophobic domains as cores of the micelles was studied by fluorescence spectroscopy. The critical micelle concentrations in aqueous solution were found to be in the range of circa 10^?6 M. A novel methodology by modulated temperature differential scanning calorimetry was developed to determine critical micelle temperature. A significant concentration dependence of cmt was found. Dynamic light scattering measurements showed a bidispersed size distribution. The micelles showed reversible dispersion/aggregation in response to temperature cycles with lower critical solution temperature between 75 and 85 °C. The interplay of the two hydrophobic and one thermoresponsive macromolecular chains offers the chance to more complex morphologies. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Micellar solubilization of biopolymers in hydrocarbon solvents. I. a structural model for protein-containing reverse micelles

Three proteins (horse liver alcohol dehydrogenase, ribonuclease, lysozyme) were solubilized in hydrocarbon with the help of reverse micelles formed by aqueous di(2-ethyl-hexyl) sodium sulfosuccinate (AOT). Sedimentation and diffusion coefficients of the micellar aggregates were measured with an analytical ultracentrifuge. Partial specific volumes were also evaluated from density measurements. The molecular weight of the protein-containing reverse micelles (M _t ) could thus be determined for each protein system at various w₀ values (w₀ - [H₂O]/[AOT]). For horse liver alcohol dehydrogenase at w₀ = 46.4, for example,M _t is ca. 2,670,000 Daltons; for lysozyme at wo = 22.5,M _t is ca. 323,000 Daltons and increases by increasing w₀. On the basis of these experimentally determined molecular weights, a structural model for the protein-containing reverse micelle is proposed. The model is based upon the assumption that the protein is confined in the water pool of a spherical micelle, and that the inner core volume is the sum of the protein volume and the volume of all water molecules present in a micelle. It is possible then to calculate the micellar structure at each w₀ value. For example, in the case of ribonuclease at w₀ = 20, the inner core radius is ca. 37.5 A, and a layer of water of ca. 22 A separates the protein surface from the surfactant layer. The possible implications of this model for the reactivity of enzymes solubilized in hydrocarbons by reverse micelles are discussed.     

Fabrication of organic–inorganic nano-complexes using ABC type triblock copolymer and polyoxotungstates

New organic–inorganic nano-complexes were produced from a micelle of tri-block polymers; poly(styrene)-b-poly(2-vinylpyridine)- b-poly (ethylene oxide) (PS-PVP-PEO) and tungsten compounds such as tungstate (W₁²⁻), undecatungstophospate (PW₁₁⁷⁻) and undecatungstosilicate (SiW₁₁⁸⁻) in acidic aqueous solutions. The size and morphology of the complexes were characterized by measurements of dynamic light scattering, atomic force microscopy, and scanning electron microscopy. This complex is assembled mainly by the charge interaction between the inorganic polyanions and the positively charged PVP block in the PS-PVP-PEO molecule, which was confirmed by zeta-potential and fluorescence spectroscopic studies. In the absence of the inorganic anions, the zeta-potential of the micelle was +11 mV at pH 3 due to the positive charge of the PVP block. When the inorganic anion was mixed with the PS-PVP-PEO micelle, decrease in the zeta-potential due to charge neutralization occurred with incorporation of inorganic anions into the PS-PVP-PEO micelle. The minimum zeta-potential was 0, −33, and −35 mV for W₁²⁻ /PS-PVP-PEO, PW₁₁⁷⁻ /PS-PVP-PEO, and SiW₁₁⁸⁻ /PS-PVP-PEO complexes, respectively. Excess negative charge which occurred in the latter two complexes indicates that PS-PVP-PEO molecules bound PW₁₁⁷⁻ and SiW₁₁⁸⁻ by forces other than charge interaction. In addition, the incorporation of an inorganic polyanion into the micelle gave a new morphology to the micelle. In the absence of the polyanion, the PS-PVP-PEO micelles showed an extended conformation due to repulsive forces working among the positively charged PVP blocks. Addition of the polyanion caused the formation of shrunken forms of the micelles, since the charge repulsion was cancelled by the polyanion. This feature may be useful in developing a new type of functioning micelle.     

The inverted micellar catalysis of the reaction of 2-aminomethylphenols with 4-nitrophenyl bis(chloromethyl)phosphinate

The parameters of the reaction ofpara-substituted 2-aminomethylphenols with 4-nitrophenyl bis(chloromethyl)phosphinate in toluene catalyzed by reversed micelles of polyethylene glycol-600 monolaurate depend on the nucleophile structure. The efficiency of the catalytic action increases in the series of substitutes C₉H₁₉ ⁱ<H<Cl. An increase in the catalytic activity of micelles in the region of structural rearrangement of micelle aggregates was observed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 275–278, February, 1999.