Novel antimicrobial polyethylene composites prepared by metallocenic in situ polymerization with TiO2‐based nanoparticles

Polyethylene (PE) composites with titanium oxide (TiO₂) nanoparticles were produced via in situ polymerization representing a novel route to obtain antimicrobial polymeric materials. The TiO₂ nanoparticles synthesized by the sol–gel method were used either as‐synthesized or modified organically with hexadecyltrimethoxysilane (Mod‐TiO₂). These particles were added, together with the catalytic system (formed by a metallocenic catalyst and methylaluminoxane as cocatalyst), directly to the reactor, yielding in situ PE composites with 2 and 8 wt % content of nanofiller. The catalytic polymerization activity presented a slight decrease with the incorporation of the TiO₂ and Mod‐TiO₂ nanoparticles compared to polymerization without filler. Regarding the properties of the composites, crystallinity increased slightly when the different nanofillers were added, and the elastic modulus increased around 15% compared to neat PE. PE/TiO₂ nanocomposites containing 8 wt % of TiO₂ exposed to UVA irradiations presented antimicrobial activity against Escherichia coli. The PE/Mod‐TiO₂ nanocomposite with 8 wt % filler killed 99.99% of E. coli, regardless of light and time irradiation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Photocatalytic activity of polyaniline/Fe-doped TiO2 composites by in situ polymerization method

This study was focused on the photocatalytic activity of polyaniline (Pani)/iron doped titanium dioxide (Fe–TiO₂) composites for the degradation of methylene blue as a model dye. TiO₂ nanoparticles were doped with iron ions (Fe) using the wet impregnation method and the doped nanoparticles were further combined with Pani via an in situ polymerization method. For comparison purposes, Pani composites were also synthesized in the presence undoped TiO₂. The photocatalyst and the composites were characterized by standard analytical techniques such as FTIR, XRD, SEM, EDX and UV–Vis spectroscopies. Fe–TiO₂ and its composites exhibited enhanced photocatalytic activity under ultraviolet light irradiation. Improved photocatalytic activity of Fe–TiO₂ was attributed to the dopant Fe ions hindering the recombination of the photoinduced charge carriers. Pani/Fe–TiO₂ composite with 30?wt.% of TiO₂ nanoparticles achieved 28% dye removal and the discoloration rate of methylene blue for the sample was 0.0025?min^?1. FTIR, XRD, SEM, EDX and UV–Vis spectroscopies supported the idea that Fe ions integrated into TiO₂ crystal structure and Pani composites were successfully synthesized in the presence of the photocatalyst nanoparticles. The novelty of this study was to investigate the photocatalytic activity of Pani composites, containing iron doped TiO₂ and to compare their results with that of Pani/TiO₂.     

Preparation of PA6/nano titanium dioxide (TiO2) composites and their spinnability

In this work, surface modification technique with coupling agents and anchoring polymerization was adopted to tailor the surface properties of nanoscaled titanium dioxide (TiO₂). Ethyl glycol sols with TiO₂ were prepared in order to simulate the dispersibility of differently modified TiO₂ in a molten polyamide 6 (PA6) matrix. The modified TiO₂ were melt compounded with PA6 and composites and fibers were prepared. The average filler diameter of 47 nm (in composites) and 44 nm (in fibers) indicated homogeneous dispersion of TiO₂ in the matrix, whereas unmodified TiO₂ showed agglomerated structures in the PA6 matrix. The mechanical properties of the composite fibers were improved as compared to pure PA6 fibers and composite fibers with unmodified TiO₂.     

In situ polypyrrole polymerization enhances the photocatalytic activity of nanofibrous TiO2/SiO2 membranes

PPy@TS nanocomposite with enhanced photocatalytic capability was prepared by in situ polymerizing polypyrrole on the surface of TiO₂/SiO₂ nanofibrous membrane.     

Rheology and crystallization behavior of PLLA/TiO2‐g‐PDLA composites

Poly(L‐lactide) (PLLA) composites with TiO₂‐g‐poly(D‐lactide) (PDLA), which was synthesized by surface‐initiated opening ring polymerization with TiO₂ as initiator and Sn(Oct)₂ as catalyst, were prepared by solution casting. The synthesized TiO₂‐g‐PDLA was characterized by transmission electron microscope (TEM) and dynamic laser scattering (DLS), showing larger size corresponding to that of TiO₂. Fourier transform infrared spectroscopy (FT‐IR) and X‐ray photoelectron spectroscopy (XPS) measurements were further carried out and indicated that PDLA was grafted onto TiO₂ through covalent bond. For PLLA/TiO₂‐g‐PDLA composites, the stereocomplex crystallites were formed between PDLA grafted on the surface of TiO₂ and the PLLA matrix, which was determined by FT‐IR, differential scanning calorimetry (DSC), and X‐ray diffractometer (XRD). The influence of stereocomplex crystallites on the rheological behavior of PLLA/TiO₂‐g‐PDLA was investigated by rheometer, which showed greater improvement of rheological properties compared to that of PLLA/TiO₂ composites especially with a percolation content of TiO₂‐g‐PDLA between 3 wt%–5 wt%. The crystallization and melting behavior of PLLA/TiO₂‐g‐PDLA composites were studied by DSC under different thermal treatment conditions. The formed PLA stereocomplex network acted as nucleating agents and a special interphase on the functional surface of TiO₂, which resulted in imperfect PLLA crystal with lower melting temperature. When the thermal treatment was close to the melting temperature of PLA stereocomplex, the crystallinity approached to the maximum. The isothermal crystallization study by polarizing microscope (POM) indicated that stereocomplex network presented stronger nucleation capacity than TiO₂‐g‐PDLA. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation and electrochemical properties of graphene‐supported Si‐TiO2 nanospheres as anode material for Li‐ion batteries

Graphene‐supported Si‐TiO₂ (Si‐Ti‐GE) composites have been synthesized by a simple polymerization and sintering method. In the Si‐Ti‐GE composites, many small Si‐TiO₂ particles are scattered on the graphene sheet, which can mitigate the agglomeration of the material and further reduce the particle size. The initial discharge capacities of Si‐TiO₂, Si‐Ti‐GE‐1, Si‐Ti‐GE‐2, and Si‐Ti‐GE‐3 are 336.9, 337.2, 339.8, and 356.6 mAh g⁻¹ at the current density of 200 mA g⁻¹, respectively. The discharge rate capacities of TiO₂, Si‐TiO₂, and Si‐Ti‐GE‐3 composites retain 57.5%, 41.7%, and 82.1% at the current density from 100 to 400 mA g⁻¹, respectively. Therefore, the introduction of graphene not only could facilitate the Li⁺ diffusion and electron transport but also could make better electrical conductivity.     

Facile synthesis of polyaniline/TiO2/graphene oxide composite for high performance supercapacitors

The polyaniline/TiO₂/graphene oxide (PANI/TiO₂/GO) composite, as a novel supercapacitor material, is synthesized by in situ hydrolyzation of tetrabutyl titanate and polymerization of aniline monomer in the presence of graphene oxide. The morphology, composition and structure of the composites as-obtained are characterized by SEM, TEM, XRD and TGA. The electrochemical property and impedance of the composites are studied by cyclic voltammetry and Nyquist plot, respectively. The results show that the introduction of the GO and TiO₂ enhanced the electrode conductivity and stability, and then improved the supercapacitive behavior of PANI/TiO₂/GO composite. Significantly, the electrochemical measurement results show that the PANI/TiO₂/GO composite has a high specific capacitance (1020 F g⁻¹ at 2 mV s⁻¹, 430 F g⁻¹ at 1 A g⁻¹) and long cycle life (over 1000 times).     

Preparation and crystallization of isotactic polypropylene composites filled by titanium dioxide-supported montmorillonite with a β-nucleating surface

To obtain multi-functional β-iPP composites, β-iPP composites are always filled by multiple fillers with α-nucleating ability. To prepare β-iPP/TiO₂/MMT composites, TiO₂-supported MMT with a β-nucleating surface was prepared through hydrolysis reaction of Tetra-n-butyl titanate and chemical reaction between pimelic acid and calcium ion. X-ray diffraction and scanning electron micrograph confirmed the formation of TiO₂ on the surface of MMT. The differential scanning calorimeter and X-ray diffraction illustrated that the β-iPP composites filled by TiO₂ and MMT had lower relative β-phase contents than β-iPP. It is observed by polarized optical microscope that addition of TiO₂-supported MMT with a β-nucleating surface into iPP can increase the spherulite nuclei density and decrease the spherulite size significantly and obtain the β-iPP/TiO₂/MMT composites with high relative β-phase content.     

Ag2S-石墨烯/TiO2的声化学法合成及可见光催化活性（英文）

Ag2S‐graphene/TiO2 composites were synthesized by a facile sonochemical method.The products were characterized by X‐ray diffraction,scanning electron microscopy,energy dispersive X‐ray spectroscopy,transmission electron microscopy,and UV‐Vis diffuse reflectance spectrophotometry.During the synthesis reaction,the reduction of graphene oxide and loading of Ag2S and TiO2 particles were achieved.The Ag2S‐graphene/TiO2 composites possessed a large adsorption capacity for dyes,an extended light absorption range,and efficient charge separation properties.Hence,in the photodegradation of rhodamine B,a significant enhancement in the reaction rate was observed with the Ag2S‐graphene/TiO2 composites as compared to pure TiO2.The generation of reactive oxygen species was detected by the oxidation of 1,5‐diphenyl carbazide to 1,5‐diphenyl carbazone.The high activity was attributed to the synergetic effects of high charge mobility and the red shift in the absorption edge of the Ag2S‐graphene/TiO2 composites.     

Photocatalytic Degradation of Organic Reactive Dyes over MnTiO3/TiO2 Heterojunction Composites Under UV‐Visible Irradiation

In this study, the photocatalytic degradation of organic reactive dyes have been investigated using MnTiO₃/TiO₂ heterojunction composites in the presence of electron acceptors under UV‐Visible light irradiation. This MnTiO₃/TiO₂ heterojunction composites were prepared by annealing different mass ratios of pyrophanite MnTiO₃ (3–11 wt%) and TiO₂ at 300°C. All the MnTiO₃/TiO₂ heterojunction composites were characterized by spectral techniques like X‐ray diffraction (XRD), scanning electron microscope (SEM) and diffused reflectance UV‐visible spectroscopic analysis (DRS). Among them, 9 wt% MnTiO₃/TiO₂ heterojunction composites exhibited higher photocatalytic activity for the degradation of Reactive Blue 4 (RB 4). The photocatalytic efficiency of 9 wt% MnTiO₃/TiO₂ heterojunction composites was further enhanced by the addition of substantial amount of electron acceptors like hydrogen peroxide (H₂O₂) and ammonium peroxydisulfate ([NH₄]₂S₂O₈). The presence of oxidants (electron acceptors) facilitates the fast degradation of dye solution even in higher concentration upto 200 mg/L. The photocatalytic activity of MnTiO₃/TiO₂ heterojunction composites was also studied for the degradation of other four different structured reactive dyes. The extent of mineralization of these organic reactive dyes during photocatalytic degradation was estimated from COD analysis. MnTiO₃/TiO₂ heterojunction composites was also found to have good photostability in the presence of oxidants.     

Photocatalytic activity of polyvinyl borate/titanium dioxide composites for UV light degradation of organic pollutants

In this study, it is aimed to prepare polyvinyl borate (PVB)/titanium dioxide (TiO₂) composites through the condensation reaction of polyvinyl alcohol and boric acid in the presence of TiO₂ nanoparticles. The scope of this study contains the photocatalytic activity of the prepared composites with varying TiO₂ content from 0 to 35 wt.% for the degradation of methylene blue in aqueous medium under UV light irradiation. The structure and morphological properties of the prepared composites were studied with FTIR, TGA, EDX, SEM and TEM analyses. The photocatalytic activity of the prepared samples was analyzed by UV-Vis spectrophotometer measurements. In parallel with TiO₂ content up to 30 wt.%, the photocatalytic activity of PVB/TiO₂ composites was enhanced and the composites exhibited higher discoloration rate of the model dye, methylene blue.     

Synthesis and kinetics of graft polymerization of methyl methacrylate from the RAFT coordinated surface of nano‐TiO2

Polymer chains of PMMA were grown from nano titania (n‐TiO₂) by the reversible addition‐fragmentation chain transfer polymerization process. The mechanism and kinetics of MMA polymerization from both solution and “grafted from” n‐TiO₂ were studied. The RAFT agent, 4‐cyano‐4‐(dodecylsulfanylthiocarbonyl) sulfanyl pentanoic acid, with an available carboxyl group was used to anchor onto the n‐TiO₂ surface, with the S?C(SC₁₂H₂₅) moiety used for subsequent RAFT polymerization of MMA to form n‐TiO₂/PMMA nanocomposites. The functionalization of n‐TiO₂ was determined by FTIR, XPS, partitioning studies, and thermal analysis. The livingness of the polymerization was verified using NMR and GPC, while the dispersion of the inorganic filler in the polymer was studied using electron microscopy, FTIR, and thermal analysis. The monomer conversion and molecular weight kinetics were explored for the living RAFT polymerization, both in solution and grafted from n‐TiO₂, with first‐order kinetics being observed in both cases. Increased graft density on n‐TiO₂ led to a lower rate of polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3926–3937, 2008     

Controllable synthesis of titania/reduced graphite oxide nanocomposites with various titania phase compositions and their photocatalytic performance

A facile method is presented for preparing TiO2 /reduced graphite oxide(RGO) nanocomposites with phase-controlled TiO2 nanoparticles via redox reaction between the reductive titanium(Ⅲ) precursor and graphite oxide(GO),and a series of TiO2 /RGO composites with various TiO2 phase compositions were obtained.In all the titania/RGO composites,the TiO2 nanoparticles were uniformly distributed on the surface of the RGO.The TiO2 consisted of anatase phase particles in the form of square-plates with edges less than 10 nm and the rutile phase nanorods in diameters less than 10 nm.The performances of the as-prepared TiO2 /RGO composites were investigated on catalytically degrading phenol under visible light irradiation.The TiO2 /RGO composites can effectively degrade phenol under visible light irradiation,and the phase composition of TiO2 in the composites significantly influences the activities of these catalysts.     

Influence of TiO2 particles and APP on combustion behavior and mechanical properties of flame-retardant thermoplastic polyurethane

The experimental investigation on combustion behavior and mechanical properties of flame-retardant thermoplastic polyurethane were performed in the article. By the masterbatch-melt blending technique, the TiO₂ particles were well dispersed in TPU/APP composites. The microscopic morphology structure was observed by TEM and SEM. TEM images of TPU–TiO₂ masterbatch material showed that the grain sizes of TiO₂ particles were 200–400 nm. The SEM result indicated that the TiO₂ particles could enhance compatibility and dispersion of APP in TPU. The mechanical properties of TPU composites were characterized by dynamic mechanical analysis (DMA) and tensile tests, respectively. The DMA results indicated that TiO₂ particles could improve the viscoelastic property of the TPU/APP composites. The tensile strength achieved a significant improvement with addition of TiO₂ particles. APP/TiO₂-5 obtains a better value of 344% than APP-1 (277%). Also, the flame-retardant property and thermal stability of the TPU composites were characterized using cone calorimeter test (CCT) and thermogravimetric analysis (TGA), respectively. The CCT results revealed that TiO₂ particles could enhance the flame-retardant property of APP in TPU. The peak heat release rate of APP/TiO₂-4 containing 0.5% TiO₂ decreased to 157.27 kW m^?2 from 225.5 kW m^?2 of APP-1 sample without any TiO₂. The TiO₂ particles could promote the formation of carbon layers which restrict the diffusion of fuels into combustion zone and access of oxygen to the underlying materials. The TGA results indicated that TiO₂ can improve the thermal stability of TPU/APP composites.

     

Degradation and adsorption of rhodamine B and phenol on TiO<Subscript>2</Subscript>/MCM-41

TiO₂/MCM-41 composites with various titania content were prepared by loading titania into the mesopores of MCM-41 molecular sieves by sol-gel method, and were used as photocatalysts to degrade Rhodamine B (RhB) and phenol. The efficiency of organic contaminants removal was increased significantly compared with pure TiO₂. Ti/Si ratio, namely, the content of TiO₂ was determined by ICP-AES method. TiO₂/MCM-41 composites were characterized by X-ray diffraction, UV-Vis absorption spectroscopy and N₂ adsorption techniques. Experimental results demonstrated that most of the RhB was adsorbed instead of being degradated by TiO₂/MCM-41 due to the large specific surface area of MCM-41, while most of phenol was degradated. It turned out that the TiO₂/MCM-41 with the highest Ti/Si ratio of 0.8220 (wt) had the highest catalytic activity.     

Synthesis and characterization of conductive polyaniline/TiO2 composite nanofibers

Fibrillar conductive polyaniline/TiO₂ (PANI/TiO₂) nanocomposites with different TiO₂ amount were synthesized with a template-free in situ polymerization method and characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and conductivity measurement. The morphology determination shows that the PANI/TiO₂ composite nanofibers are relatively uniform with the diameter and length in the range of 20–40 nm and 390–420 nm respectively. It also shows that the TiO₂ of the composite is rutile crystalline and PANI has some degree of crystallinity. The IR measurement indicates that there is a strong interaction between the PANI and TiO₂ nanoparticles, and it has a beneficial effect on the thermal stability of the composite nanofiber. The conductivity of PANI/TiO₂ composites changes with TiO₂ amount and reaches an optimum value of 2.86 S/cm at 11.1 wt% TiO₂. Translated from Journal of Northwest Normal University (Natural Science), 2006, 42(4): 67–70 (in Chinese)     

Preparation of CdS–TiO2/Fe3O4 photocatalyst and its photocatalytic properties

The CdS modified TiO₂/Fe₃O₄ photocatalysts were prepared by sol–gel and immersion methods. The morphological, structural and optical properties of as-prepared samples were characterized by X-ray diffraction (XRD), UV–Vis absorption spectra, X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The TEM observation showed that the surface of magnetite particles (Fe₃O₄) were coated by CdS–TiO₂ layer as loose clusters, and average diameter of composites particles was about 250 nm. UV–Vis absorption spectra indicated that CdS–TiO₂/Fe₃O₄ composites had pronounced red-shift compared with that of TiO₂/Fe₃O₄. The CdS–TiO₂/Fe₃O₄ composites exhibit higher photocatalytic activity than pure TiO₂ and TiO₂/Fe₃O₄ for the degradation of Reactive Brilliant Red X-3B dye (X-3B) aqueous solution under simulated sunlight, and the optimum content of CdS is 1.0 % (mol ratio of CdS to TiO₂). In addition, a gradual loss of photocatalytic activity can be observed in reusability test of CdS–TiO₂/Fe₃O₄ composites, and degradation of X-3B reached still to 78.9 % after five runs.     

Preparation and characterization of poly(methyl methacrylate)/titanium oxide composite particles

Before polymerization, the introduction of double bonds onto the surface of the TiO₂ particles was achieved by the treatment of the TiO₂ particles with the silane-coupling agent. Via in-situ emulsion polymerization, the poly(methyl methacrylate) (PMMA)/titanium oxide (TiO₂) composite particles were prepared by graft polymerization of MMA from the surface of the modified TiO₂ particles. The structure of the obtained PMMA/TiO₂ composite particles was characterized using fourier transform infrared spectra (FT-IR), thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC) and size excluding chromatography (SEC). The morphology of the obtained PMMA/TiO₂ composite particles was observed by transmission electron microscope (TEM). The results of FT-IR and TGA measurements show that PMMA is successfully grafted from the surface of the TiO₂ particles and that the percentage of grafting and the grafting efficiency can reach 208.3% and 96.6%, respectively. At the same time, the TGA and DSC measurements indicate an enhancement of thermal stability. TEM images demonstrate a better dispersion of the TiO₂ particles in the composite latex. In addition, UV-visible absorption measurements show that the PMMA/TiO₂ composite particles can absorb over 95% UV light at 210–400 nm wavelength.     

Nucleation Activation and Spherical Crystals Morphology of LLDPE/LDPE/TiO2 Nanocomposites Prepared by Non-Isothermal Crystallization

The nucleation activation of TiO₂ nanoparticles in the linear low-density polyethylene (LLDPE)/low-density polyethylene (LDPE)/TiO₂ nanocomposites prepared by non-isothermal crystallization, the spherical crystals morphology of the etched LLDPE/LDPE and LLDPE/LDPE/TiO₂ composites were investigated by differential scanning calorimetry (DSC) and field-emission scanning electron microscopy (FE-SEM), respectively. The results showed that the heterogeneous nucleation activation of TiO₂ nanoparticles was accelerated by the fast cooling rate. The spherical crystals in the LLDPE/LDPE and LLDPE/LDPE/TiO₂ composites were ascribed to the same crystal structure. It was worth to note that there was distinct difference between the morphology of the cocrystallization LLDPE/LDPE crystals and that of the independent crystallization LLDPE/LDPE crystals.     

Synthesis and Characterization of Poly(methyl methacrylate)-b-Polystyrene/TiO2 Nanocomposites Via Reversible Addition-Fragmentation Chain Transfer Polymerization

A diblock copolymer, poly(methyl methacrylate)-b-polystyrene (PMMA-b-PS), was grafted onto the surface of nano-titania (nano-TiO₂) successfully via reversible addition-fragmentation chain transfer (RAFT) polymerization. The surface of TiO₂ nanoparticles was modified initially by attaching dithioester groups to the surface using silane coupling agent 3-(chloropropyl)triethoxy silane and sodium ethyl xanthate. The polymerization of methyl methacrylate and styrene were then initiated and propagated on the TiO₂ surface by RAFT polymerization. The resulting composite nanoparticles were characterized by means of XPS, FT-IR, ¹H NMR and TGA. The results confirmed the successful grafting of poly(methyl methacrylate) (PMMA) and diblock copolymer chains onto the surface of TiO₂. The amount of PMMA grafted onto the TiO₂ surface increased with the polymerization time. Moreover, the kinetic studies revealed that the ln([M]₀/[M]), where [M]₀ is the initial and [M] is the time dependent monomer concentrations, increased linearly with the polymerization time, indicating the living characteristics of the RAFT polymerization.