Synthesis of water-soluble fullerene-containing vinyl polymers by low-temperature radiation-induced living polymerization

Water-soluble polymers of acrylamide and acrylic acid that contain fullerene (more than 90% C₆₀) have been prepared by the low-temperature radiation-induced living polymerization. In the absorption spectra of these polymers, a monotonically decaying absorption typical of the covalently bound fullerene or its associates is observed in the range 240–700 nm. The radiation initiation of the process allows preparation of high-purity polymers useful for designing medicinal preparations.     

DNA hybridization detection with water-soluble conjugated polymers and chromophore-labeled single-stranded DNA

A sensor is provided that detects single-stranded deoxyribonucleic acid (ssDNA) with a specific base sequence. The ssDNA sequence sensor comprises an aqueous solution containing a cationic water-soluble conjugated polymer [in this case, poly(9,9-bis(6'-N,N,N-trimethylammonium)-hexyl)-fluorene phenylene), 1] with a ssDNA labeled with a dye (in this case, fluorescein). The emission of light from the sensor solution with the wavelength characteristic of the probe oligonucleotide indicates the presence of ssDNA with a specific base sequence complementary to that of the probe ssDNA-fluorescein. Maximum energy transfer from 1 to the signaling chromophore occurs when the ratio of polymer chains to DNA strands is approximately 1:1. Energy transfer from 1 results in a fluorescein emission that is more intense than that observed by direct excitation of the chromophore. Furthermore, the decrease in energy transfer upon addition of electrolyte indicates that electrostatic forces dominate the interactions between 1 and DNA.     

Conjugation of proteins with chelating polymers via water-soluble carbodiimide andN-hydroxysulfosuccinimide

Water-soluble chelating polymers (CP) based on polylysine and diethylenetriaminepentaacetic acid (DTPA) have been prepared. The effect of the number of DTPA-groups in the polymer chain on the process of CP carbodiimide-mediated coupling to proteins has been studied. CP obtained were conjugated with proteins via carbodiimide andN-hydroxysulfosuccinimide (HSSI). The optimal conditions of CP activation were determined using model low-molecular-weight amine. It was shown that the addition of HSSI to an activation mixture increases the coupling efficiency of CP with immunoglobulins by 3‐4-fold compared with carbodiimide alone. Possible mechanisms of this phenomenon are discussed.     

Cooperative hybridization of oligonucleotides

Nucleic acids have been demonstrated to be versatile nanoscale engineering materials with the construction of dynamic DNA structures, motors, and circuits. These constructions generally rely on the clever use and integration of relatively few reaction mechanisms and design primitives. Here, cooperative hybridization is introduced as a mechanism in which two oligonucleotides of independent sequence can stoichiometrically, simultaneously, and cooperatively hybridize to a DNA complex. Cooperative hybridization is rigorously characterized and modeled and is shown to implement digital concentration comparison with amplification, as well as digital Boolean logic. These designs, based on cooperative hybridization, excel in being robust to impurities and not requiring oligonucleotide purification.     

New water-soluble photo crosslinkable polymers based on modified poly(vinyl alcohol)

Poly(vinyl alcohol) (PVA) was partially modified by polymer analogous reaction with acrylic and methacrylic acid and with 2-vinyl-4,4-dimethyl-azlactone to obtain water-soluble polymers with pendant (meth)acrylate and acrylamide groups. Aqueous solutions of these polymers were crosslinked by UV-irradiation within seconds to form transparent networks with potential for use in contact lenses. The water content of these hydrogels was studied as a function of polymer molecular weight, the acetate, (meth)acrylate, and methacrylamide contents and irradiation conditions. The hydrogels showed good mechanical properties, even at low crosslinker (<5 mol %) and high water contents (60–80%). The formation kinetics and stability of aggregates, investigated by combined GPC/light-scattering measurements of samples annealed and/or stored at different temperatures (−20 to 100°C), give insight into PVA secondary structures. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3603–3611, 1997     

Nature of mechanoradical formation and reactivity with oxygen in methacrylic vinyl polymers

The formation of mechanoradicals under anaerobic conditions and their reactivity with oxygen at room temperature is described for several methacrylic vinyl polymers. Observed electron spin resonance (ESR) spectra of the mechanoradicals formed were all essentially identical and are clearly assigned to a respective endchain radical. The ESR kinetics of the mechanoradical formation of polymethylmethacrylate (PMMA) and polymethacrylamide (PMAAm) exhibit an interesting contrast; the progressive changes in the radical concentration in PMMA as a function of duration of milling gradually decrease after reaching a maximum value, while those of PMAAm show a parabolic increase. This discrepancy has been ascribed to mechanoradicals of PMAAm that are strongly stabilized by intermolecular and intramolecular doubly hydrogen-bonded networks among the amide groups. Such interactions also are to lower the reactivity of the mechanoradicals with oxygen. Thus, the mechanoradicals of both PMAAm and PMAA do not give a single peroxy radical, but rather a mixture of the mechanoradical and peroxy radical even after exposure to air, while the mechanoradicals of other polymers are rapidly converted to the corresponding peroxy radicals. Such a difference was observed in experiments on the mechanical fracture of such polymers under aerobic conditions.     

Network formation during vinyl polymerization via inorganic particles

Methyl methacrylate containing a small amount of 4-methacryloxyethyl trimellitate anhydride (1.0–1.5 wt %) yielded an insoluble network when polymerized in the presence of various inorganic powders, such as lithium aluminum silicate. This unexpected result was obtained for polymerization initiated either by exposure to γ-rays or by heating with azobisisobutyronitrile. In contrast, polymerization in the absence of inorganic powder gave the expected soluble products. Therefore, it is concluded that the inorganic particles play a role in network formation. In order to account for network formation even in a supernatant layer of clear monomer, i.e., above the centrifuged sedimentation volume of the powder, it is suggested that the monomer reacts on the surface of particles to form a diffusive crosslinking agent.     

Manipulating supramolecular self-assembly via tailoring pendant group size of linear vinyl polymers

In a series of poly[di(alkyl) vinylterephthalates] (PDAVTs) synthesized via radical polymerization, fine-tuning the size and shape of the side groups manipulated the supramolecular self-assembly and led to control over the formations between amorphous and 2D ordered hexagonal phases. To introduce the 2D long-range ordered structure, the size of the ester side groups at the 2- and 5-positions of the phenyl rings laterally attached to the backbones had to be in the range of propyl/isopropyl to hexyl. The relatively extended backbones observed in these polymers were attributed to steric effects from the side groups. When the n-alkyl groups were larger than hexyl, the ability to form the liquid crystalline phase gradually decreased. A completely disordered phase could be observed by substituting dodecyl groups as side groups.     

Complexation of water-soluble polymers and photosensitizer

Water-soluble polymers poly-N-methacryloyloxyethyl-N,N,N-trimethylammonium methyl sulfate and poly(methacrylic acid) are found on the basis of spectral, thermophysical, structural, and morphological studies to form stable complexes with Photodithazine photosensitizer.     

Synthesis and characterization of optically active helical vinyl polymers via free radical polymerization

A facile synthetic route to prepare the dual‐functional molecule, 2,5‐bis(4′‐carboxyphenyl)styrene, was developed. The esterification of this compound with chiral alcohols, that is, (S)‐(+)‐sec‐butanol/(R)‐(?)‐sec‐butanol, (S)‐(+)‐sec‐octanol/(R)‐(?)‐sec‐octanol, and D ‐(+)‐menthol/L ‐(?)‐menthol, respectively, yielded three enantiomeric pairs of novel vinyl monomers, which underwent radical polymerization to obtain helical polymers with an excess screw sense. These polymers exhibited optical rotations as large as fourfold those of the corresponding monomers. Their helical conformations were quite stable as revealed by the almost unchanged chiroptical properties measured at different temperatures. The polymers with linear alkyl tails in the side‐groups formed irreversibly columnar nematic phases in melt although the corresponding monomers were not liquid crystalline. Whereas, the polymers with cyclic tails generated no mesophase. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2408–2421, 2009     

Photophysics of vinyl aromatic polymers

The experimental approaches required to characterize energy migration and excimer formation in vinyl aromatic polymers are considered. As an example the photophysical processes occurring in poly(acenaphthylene) (PACE) and water soluble acenaphthylene copolymers have been investigated using steady state and time resolved fluorescence spectroscopy. Excimer formation in these polymers is determined by both structural and dynamic factors. The difficulties in the application of fluorescence decay analyses to examine energy migration in polymers are discussed. For PACE with a 9-methylanthryl (9MA) end-group and the copolymers containing solubilized 9MA, energy migration and transfer can be demonstrated.     

Synthesis of chiral, amphiphilic, and water-soluble macrocycles via urea formation

A simple, efficient, and flexible procedure for the synthesis of chiral, amphiphilic, and water-soluble macrocycles is reported. Acylation of p-xylylenediamine with N^α-Fmoc-protected glycine, l-aspartic acid, l-glutamic acid, and l-arginine, followed by removal of Fmoc-groups, gave amino acid:p-xylylene conjugate diamines, which were converted to ten macrocycles via stepwise urea formation using p-nitrophenyl chloroformate. l-Aspartic acid-containing macrocyles proved to be soluble in aqueous buffers and a macrocycle containing four aspartate residues was found to recognize arginine and arginine esters with moderate affinity.     

Heterogeneous polymer systems. IV. Mechanism of rubber particle formation in rubber-modified vinyl polymers

A mechanism for the formation of rubber particles in the polymerization of solutions of rubber in vinyl monomers is presented. A polymeric oil-in-oil emulsion is formed in the first phase of the polymerization. This polymeric oil-in-oil emulsion is transtormed into a solid dispersion of rubber in vinyl polymer in the second phase of the polymerization. A phase inversion takes place in the emulsion in the first phase of the polymerization. Rubber solution droplets are formed at the phase inversion point. These droplets harden as the polymerization proceeds and are gradually transformed into the solid, crosslinked rubber particles of the final polymer.     

疏水缔合水溶性聚合物溶液性能研究进展

本文针对疏水缔合水溶性聚合物的稀溶液和半浓溶液两种情况，综述了最近十多年来溶液的性能的研究进展。文中讨论了表征分子量和疏水相互作用的特性粘数与Huggins常数。分别介绍了聚合物浓度、分子量、疏水基类型、含量、长短及序列分布、离子基团的种类和位置、剪切速率、温度以及化学相互作用对溶液性能的影响。     

Poly(vinyl alcohol) star polymers prepared via MADIX/RAFT polymerisation

Poly(vinyl acetate) stars were prepared using MADIX/RAFT polymerisation mediated by xanthates. The polymerisation shows living characteristics with molecular weight increasing with conversion. The subsequent hydrolysis of these three and four arm stars led to the formation of poly(vinyl alcohol) stars.     

Short-branch formation via the roedel mechanism in copolymers of ethylene and vinyl acetate

A realistic rotational isomeric state model has been used to estimate the relative probabilities of the formation of various types of short branches in ethylene–vinyl acetate copolymers that are rich in ethylene. Butyl is predicted to be the most common short branch in all of the copolymers examined, although it is less common in the copolymers than in low-density polyethylene. The major factor responsible for the suppression of the R₀₄ backbiting intrachain radical transfer is the increased preference for trans states at the mainchain bonds flanking the attachment site for an isolated acetoxy side chain.     

Synthesis and properties of water-soluble gold colloids covalently derivatized with neutral polymer monolayers

Citrate-capped gold nanoparticles as well as planar gold surfaces can be efficiently grafted with a covalently attached polymer monolayer a few nanometers thick, by simple contact of the metal surface with dilute aqueous solutions of hydrophilic polymers that are end-capped with disulfide moieties, as shown by UV/vis absorption, dynamic light scattering, and surface plasmon resonance studies. The hydrophilic polymer-coated gold colloids can be freeze-dried and stored as powders that can be subsequently dissolved to yield stable aqueous dispersions, even at very large concentrations. They allow for applying filtrations, gel permeation chromatography, or centrifugation. They do not suffer from undesirable nonspecific adsorption of proteins while allowing the diffusion of small species within the hydrogel surface coating. In addition, specific properties of the original hydrophilic polymers are retained such as a lower critical solution temperature. The latter feature could be useful to enhance optical responses of functionalized gold surfaces toward interaction with various substrates.     

Effects of vinyl series polymers on the formation of hematite particles in a forced hydrolysis reaction

The influence of polymers on the formation of hematite particles from forced hydrolysis of acidic FeCl(3) solution was investigated using vinyl series polymers with different functional groups. The disk-like hematite particles were produced from forced hydrolysis of acidic FeCl(3) solution in the presence of polyvinyl alcohol (PVA: 0-1 wt%). On the other hand, spherical particles were produced by addition of very small amounts of polyacrylamide (PAAm: 0-0.004 wt%). The size of spherical particles was slightly decreased with increase in the concentration of PAAm. The ellipsoidal particles were precipitated by addition of a very low concentration of polyacrylic acid (PAAc: 0-0.004 wt%). The effect of polymers on the hematite particle formation was expressed in the order of PVA相似文献   

Ionic conductivity of conjugated water-soluble rigid-rod polymers

Poly[(1,7-dihydrobenzo[1,2-d:4,5-d′] diimidazole-2,6-diyl)-2-(2-sulfo)-p-phenylene], a conjugated rigid-rod polymer, was derivatized with pendants of propane-sulfonated ionomers. The derivatized rigid-rod polymer was soluble in aprotic solvents as well as in water for isotropic solutions that were processed into isotropic films. Direct-current electrical conductivity σ of the films was measured using the four-probe technique. Room-temperature σ as high as 2.9 × 10^?4S/cm was achieved on pristine isotropic films without using dopants. When the rigid-rod polymer concentration exceeded 25 wt %, the isotropic solution could be transformed into a liquid-crystalline solution that allowed deformations to be applied to produce anisotropic films. Significant increase in σ was obtained in a sheared film along both the parallel direction (∥) and the transverse direction (⊥) with a σ_∥/σ_⊥ = 5. Additionally, enhanced σ was realized in films heat-treated at about 100°C, in the derivatized polymer with higher molecular weight from dialysis, and in substituting the sulfonated ion Na⁺ by H⁺ in the pendants of the polymers. Constant-voltage measurements were applied to the polymers to monitor the σ stability for ascertaining the nature of the conductivity. No electronic contribution in σ was detected. Instead, a monotonically decreasing σ was consistently observed indicative of ionic conductivity. © 1993 John Wiley & Sons, Inc.