A Sequential Homologation of Alkynes and Aldehydes for Chain Elongation with Optional 13C‐Labeling

Terminal alkynes (RCCH) are homologated by a sequence of ruthenium‐catalyzed anti‐Markovnikov hydration of alkyne to aldehyde (RCH₂CHO), followed by Bestmann–Ohira alkynylation of aldehyde to chain‐elongated alkyne (RCH₂CCH). Inverting the sequence by starting from aldehyde brings about the reciprocal homologation of aldehydes instead. The use of ¹³C‐labeled Bestmann–Ohira reagent (dimethyl ((1‐¹³C)‐1‐diazo‐2‐oxopropyl)phosphonate) for alkynylation provides straightforward access to singly or, through additional homologation, multiply ¹³C‐labeled alkynes. The labeled alkynes serve as synthetic platform for accessing a multitude of specifically ¹³C‐labeled products. Terminal alkynes with one or two ¹³C‐labels in the alkyne unit have been submitted to alkyne–azide click reactions; the copper‐catalyzed version (CuAAC) was found to display a regioselectivity of >50 000:1 for the 1,4‐ over the 1,5‐triazine isomer, as shown analytically by ¹³C NMR spectroscopy.     

IRMS detection of testosterone manipulated with C labeled standards in human urine by removing the labeled C

Isotope ratio mass spectrometry (IRMS) is applied to confirm testosterone (T) abuse by determining the carbon isotope ratios (δ¹³C value). However, ¹³C labeled standards can be used to control the δ¹³C value and produce manipulated T which cannot be detected by the current method. A method was explored to remove the ¹³C labeled atom at C-3 from the molecule of androsterone (Andro), the metabolite of T in urine, to produce the resultant (A-nor-5α-androstane-2,17-dione, ANAD). The difference in δ¹³C values between Andro and ANAD (Δδ¹³C_Andro–ANAD, ‰) would change significantly in case manipulated T is abused. Twenty-one volunteers administered T manipulated with different ¹³C labeled standards. The collected urine samples were analyzed with the established method, and the maximum value of Δδ¹³C_Andro–ANAD post ingestion ranged from 3.0‰ to 8.8‰. Based on the population reference, the cut-off value of Δδ¹³C_Andro–ANAD for positive result was suggested as 1.2‰. The developed method could be used to detect T manipulated with 3-¹³C labeled standards.     

Supramolecular Complexation in Biological Media: NMR Study on Inclusion of an Anionic Tetraarylporphyrin into a Per‐O‐Methylated β‐Cyclodextrin Cavity in Serum,Blood, and Urine

The supramolecular complexation of 5,10,15,20‐tetrakis(4‐sulfonatophenyl)porphyrin (TPPS) with heptakis(2,3,6‐tri‐O‐methyl)‐β‐cyclodextrin (TMCD) has been known to be highly specific in aqueous media. In this study, we have used NMR spectroscopy to reveal that this supramolecular system also works even in biologically crowded media such as serum, blood, and urine. A ¹³C‐labeled heptakis(2,3,6‐tri‐O‐methyl‐¹³C)‐β‐cyclodextrin (¹³C‐TMCD) was synthesized and studied using one‐dimensional (1D) HMQC spectroscopy in serum and blood. The 1D HMQC spectrum of ¹³C‐TMCD showed clear signals due to the 2‐, 3‐, and 6‐O¹³CH₃ groups, whose chemical shifts changed upon addition of TPPS due to quantitative formation of the ¹³C‐TMCD/TPPS=2/1 inclusion complex in such biological media. The ¹H NMR signals of non‐isotope‐labeled TPPS included by ¹³C‐TMCD were detected using the ¹³C‐filtered ROESY technique. A pharmacokinetic study of ¹³C‐TMCD and its complex with TPPS was carried out in mice using the 1D HMQC method. The results indicated that (1) 1D HMQC is an effective technique for monitoring the inclusion phenomena of ¹³C‐labeled cyclodextrin in biological media and (2) the intermolecular interaction between ¹³C‐TMCD and TPPS is highly selective even in contaminated media like blood, serum, and urine.     

Design of EGDMA‐Crosslinked Theophylline Imprinted Polymer with High Specificity and Selectivity

An attempt has been made to design theophylline selective polymers with maximum selectivity and specificity, and to relate the rebinding capacity of the polymers with the degree of crosslinking, as well as with the template‐monomer ratio. The theophylline imprinted and non‐imprinted polymers based on methacrylic acid as the functional monomer and ethylene glycol dimethacrylate (EGDMA) as crosslinking agent (35–80 mol%) were prepared. The developed imprinted polymers were characterized by FT‐IR, ¹H and ¹³C‐NMR spectra. Equilibrium binding of theophylline by the imprinted and non‐imprinted polymers were investigated and optimized the conditions. Imprinted polymers showed specific binding of the template theophylline. Selectivity of the imprinted polymers was investigated towards caffeine and nicotine. Imprinted polymers showed specific and selective binding of theophylline, which varied with the degree of EGDMA crosslinking. Equilibrium rebinding experiments proved that imprinted polymer with moderate (70%) crosslinking with 1∶2 template‐functional monomer ratio is ideal with maximum specificity and selectivity.     

Synthesis of [18,19,21,22‐13C4]‐Labeled Tautomycin as an NMR Probe of Protein Phosphatase Inhibitor

We have accomplished the synthesis of ¹³C‐labeled tautomycin at the C18, C19, C21, and C22 positions starting from 100 % [¹³C]triethylphosphonoacetate for the purpose of elucidating the dynamics and conformation of the C17–C26 moiety. NMR spectroscopy of ¹³C‐labeled tautomycin revealed strong binding with protein phosphatase type 1 and new features in the ¹³C NMR spectrum, such as the very small three‐bond coupling constants (²J).     

Initiator selectivity during free radical copolymerizations of styrene and methyl methacrylate initiated by anaerobic copper(II) oxidation of carbon‐13 labeled acetophenone

Nuclear magnetic resonance (NMR) analysis of the ¹³C‐labeled chain ends of polystyrene, polyMMA, and styrene‐MMA copolymers prepared by polymerizations initiated using ¹³C‐labeled‐phenacyl radicals were investigated. The phenacyl radicals were generated by anaerobic oxidation of acetophenone‐methyl‐¹³C using a Cu(II) octanoate‐pyridine complex in the presence of triethylamine and triphenylphosphine. NMR analysis of the ¹³C‐labeled chain ends of these polymers afforded insight into the initiation mechanism. In copolymerization experiments using ¹³C‐labeled acetophenone initiator, the NMR spectra provided evidence that the phenacyl radical reacts 2.7 times faster with styrene than with MMA. The resonances of the labeled phenacyl carbons also showed that the sequence and stereosequence distributions of monomer units at the chain ends are nearly the same as those that prevail along the polymer chains. Styrene–styrene, styrene–MMA, and MMA–styrene enchainments at the chain ends are equally likely to have meso (erythro) or racemic(threo) configurations but the ratio of meso to racemic MMA‐MMA enchainments is ～ 3/7. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2347–2356, 2008     

The additivity of NMR carbon–carbon spin–spin coupling constants

Fluorene-9-¹³C, fluorenone-9-¹³C, acenaphthenone-11-¹³C, acenaphthenone-12-¹³C, 1-methylcyclopentanol-1-¹³C and 1-methylcyclopentene-1-¹³C were synthesized to obtain J(CC) values between the natural carbons and the labeled carbons. Each of these compounds possessed at least one asymmetric dual-path coupling, i.e., coupling between the labeled carbon and another carbon via simultaneous two- and three-bonded coupling paths. Model ¹³C-labeled compounds were synthesized where necessary to give expected values of the constituent mono-path couplings. Values of these dual-path couplings (²⁺³)J suggested that the observed value is the (at least approximate) algebraic sum of the two constituent J values.     

Real‐Time Interrogation of Aspirin Reactivity,Biochemistry, and Biodistribution by Hyperpolarized Magnetic Resonance Spectroscopy

Hyperpolarized magnetic resonance spectroscopy enables quantitative, non‐radioactive, real‐time measurement of imaging probe biodistribution and metabolism in vivo. Here, we investigate and report on the development and characterization of hyperpolarized acetylsalicylic acid (aspirin) and its use as a nuclear magnetic resonance (NMR) probe. Aspirin derivatives were synthesized with single‐ and double‐¹³C labels and hyperpolarized by dynamic nuclear polarization with 4.7 % and 3 % polarization, respectively. The longitudinal relaxation constants (T₁) for the labeled acetyl and carboxyl carbonyls were approximately 30 seconds, supporting in vivo imaging and spectroscopy applications. In vitro hydrolysis, transacetylation, and albumin binding of hyperpolarized aspirin were readily monitored in real time by ¹³C‐NMR spectroscopy. Hyperpolarized, double‐labeled aspirin was well tolerated in mice and could be observed by both ¹³C‐MR imaging and ¹³C‐NMR spectroscopy in vivo.     

Real‐Time Interrogation of Aspirin Reactivity,Biochemistry, and Biodistribution by Hyperpolarized Magnetic Resonance Spectroscopy

Hyperpolarized magnetic resonance spectroscopy enables quantitative, non‐radioactive, real‐time measurement of imaging probe biodistribution and metabolism in vivo. Here, we investigate and report on the development and characterization of hyperpolarized acetylsalicylic acid (aspirin) and its use as a nuclear magnetic resonance (NMR) probe. Aspirin derivatives were synthesized with single‐ and double‐¹³C labels and hyperpolarized by dynamic nuclear polarization with 4.7 % and 3 % polarization, respectively. The longitudinal relaxation constants (T₁) for the labeled acetyl and carboxyl carbonyls were approximately 30 seconds, supporting in vivo imaging and spectroscopy applications. In vitro hydrolysis, transacetylation, and albumin binding of hyperpolarized aspirin were readily monitored in real time by ¹³C‐NMR spectroscopy. Hyperpolarized, double‐labeled aspirin was well tolerated in mice and could be observed by both ¹³C‐MR imaging and ¹³C‐NMR spectroscopy in vivo.     

Adsorption of cinnabarinic acid from culture fluid with magnetic microbeads

In this study, antimicrobial pigment cinnabarinic acid (CA) was produced from Pycnoporus cinnabarinus in laboratory‐scale batch cultures. Magnetic poly(ethylene glycol dimethacrylate‐N‐methacryloyl‐l‐tryptophan methyl ester) [m‐poly(EGDMA‐MATrp)] beads (average diameter = 53–103 µm) were synthesized by copolymerizing of N‐methacryloyl‐l‐tryptophan methyl ester (MATrp) with ethylene glycol dimethacrylate (EGDMA) in the presence of magnetite (Fe₃O₄) and used for the adsorption of CA. The m‐poly(EGDMA‐MATrp) beads were characterized by N₂ adsorption/desorption isotherms (Brunauer Emmet Teller), X‐ray photoelecron spectroscopy, scanning electron microscopy, infrared spectroscopy, thermal gravimetric analysis, electron spin resonance and swelling studies. The efficiency of m‐poly(EGDMA‐MATrp) beads for separation of CA from culture fluid was evaluated. The effects of pH, initial concentration, contact time and temperature on adsorption were analyzed. The maximum CA adsorption capacity of the m‐poly(EGDMA‐MATrp) beads was 272.9 mg g⁻¹ at pH 7.0, 25 °C. All the isotherm data can be fitted with the Langmuir, Freundlich and Dubinin–Radushkevich isotherm models. The adsorption process obeyed pseudo‐second‐order kinetic model. Thermodynamic parameters ΔH = 5.056 kJ mol⁻¹, ΔS = 52.44 J K⁻¹ mol⁻¹ and ΔG = −9.424 kJ mol−¹ to ‐11.27 kJ mol−¹ with the rise in temperature from 4 to 40 °C indicated that the adsorption process was endothermic and spontaneous. Copyright © 2015 John Wiley & Sons, Ltd.     

Peak area measurements of cross-polarization magic-angle-spinning 13C-NMR spectra of crosslinked polystyrenes

Cross-polarization magic-angle-spinning ¹³C-NMR spectra of polystyrenes crosslinked with 1–20% of methine vinyl carbon ¹³C-labeled p-divinylbenzene and of Friedel–Crafts crosslinked poly(chloromethylstyrene)s have been obtained with both glossy solid and CDCl₃-swollen gel samples. The spectra of natural abundance, uncrosslinked, glassy polystyrene, and the spectra of the solid labeled networks give aliphatic and aromatic peak areas only 0.7 times as large per ¹³C atom as that of poly(oxymethylene). Similarly the crosslinked poly(chloromethylstyrene) gave peak areas about 0.6 times that of internal poly(oxymethylene). The labeled gels give peak areas 0.2–0.6 times as large per ¹³C atom as glassy polystyrene, and the peak areas in spectra of gels increase with the divinylbenzene content     

The conversion of isotopically labeled glycine to 1-methyl-2-amino-2-imidazolin-4-one (creatinine)

A procedure is presented which allows the conversion of glycine to creatinine (1-methyl-2-amino-2-imidazolin-4-one). The scheme was devised to optimize the yield based on the amount of glycine used so that the relatively readily available isotopically labeled glycines could be efficiently converted to the correspondingly labeled creatinines. In this case 1-(¹³C)-glycine was converted to 4-(¹³C)-1-methyl-2-amino-2-imidazolin-4-one.     

Determination of [13C-15N] Labeled Methylxanthines by Gas Chromatography-Atomic Emission Detection (GC-AED) and Compound-Independent Calibration

ABSTRACT

Compound independent calibration (CIC) can be used to measure stable isotopically labeled molecules and their metabolites. This study was designed to demonstrate that gas chromatography coupled to atomic emission detection and CIC are useful analytical tools for the specific and quantitative determination of ¹³C and ¹⁵N labeled caffeine and its metabolites. These labeled compounds can be measured by monitoring either ¹³C or ¹⁵N atomic emission lines and using only one calibration function from one of the analytes. This method can be helpful when it is difficult or impossible to obtain an authentic reference material, which is often the case in metabolic studies.     

13C‐Isotope Labeled Surrogate for Estimating Organophosphorus Pesticides in Agricultural Products by Gas Chromatography‐Mass Spectrometry

¹³C‐isotope labeled paraoxon‐ethyl (¹³C₂‐EP) and deuterium‐labeled paraoxon‐methyl (D₆‐MP) were synthesized and employed as the surrogate (SS) and the internal standard (IS) in organophosphorus pesticides (OPs) spiking agricultural QC samples. The residual amounts of OPs were determined with gas chromatography‐mass spectrometry (GC‐MS) method. The isotope‐labeled compounds used in this study could assist the analysts to estimate the appropriateness and the uncertainties produced by pre‐treatment process. It was found that these isotope labeled compounds could improve the accuracy (10% to 40% of quantitative analysis), and provide efficacious calibration for the spiking recoveries of OPs in some agricultural samples.     

Structure elucidation of uniformly 13C labeled small molecule natural products

Utilization of ²H, ¹³C, and ¹⁵N isotopically labeled proteins and peptides is now routine in biomolecular NMR investigations. The widespread availability of inexpensive, uniformly ¹³C enriched glucose now makes it possible to isolate uniformly ¹³C labeled natural products from microbial fermentation. We now wish to describe an approach for the rapid structural characterization of uniformly ¹³C labeled natural products that avoids the pitfalls of relying on parameters typically employed in biomolecular NMR studies. Copyright © 2015 John Wiley & Sons, Ltd.     

Structural Revision and Elucidation of the Biosynthesis of Hypodoratoxide by 13C,13C COSY NMR Spectroscopy

Feeding of (2,3,4,5,6‐¹³C₅)mevalonolactone to the fungus Hypomyces odoratus resulted in a completely labeled sesquiterpene ether. The connectivity of the carbon atoms was easily deduced from a ¹³C,¹³C COSY spectrum, revealing a structure that was different from the previously reported structure of hypodoratoxide, even though the reported ¹³C NMR data matched. A structural revision of hypodoratoxide is thus presented. Its absolute configuration was tentatively assigned from its co‐metabolite cis‐dihydroagarofuran. Its biosynthesis was investigated by feeding of (3‐¹³C)‐ and (4,6‐¹³C₂)mevalonolactone, which gave insights into the complex rearrangement of the carbon skeleton during terpene cyclization by analysis of the ¹³C,¹³C couplings.     

Biosynthesis of aspergiolide A, a novel antitumor compound by a marine-derived fungus Aspergillus glaucus via the polyketide pathway

Aspergiolide A, a novel antitumor compound, was produced by a marine-derived filamentous fungus Aspergillus glaucus. The biosynthesis of it was unambiguously determined by feeding experiments using [l-¹³C]sodium acetate, [2-¹³C]sodium acetate, and [1,2-¹³C₂]sodium acetate precursors followed by ¹³C NMR spectroscopic investigation of the isolated products. Analysis of the patterns of ¹³C-enrichment revealed that all 25 carbon atoms in skeleton of aspergiolide A were derived from labeled acetate. And among them, 12 carbon atoms were labeled from the carboxylic group of acetate, while the other 13 carbon atoms were labeled from the methylic group of acetate. Besides, the labeling pattern of [1,2-¹³C₂]sodium acetate feeding experiment demonstrated that 12 intact acetate units were incorporated in aspergiolide A by polyketide pathway.     

Totalsynthese des Verrucarins E sowie ihre Anwendung zur Herstellung eines 13C-markierten Derivates desselben

Total synthesis of verrucarin E. Its application to the preparation of a ¹³C-labeled derivative. A relative high over-all yield synthesis of verrucarin E (3-acetyl-4-hydroxymethyl-pyrrole), a secondary metabolite of the soil fungus Myrothecium verrucaria, has been achieved by condensation of (E)-5-benzyloxy-3-penten-2-one with tosylmethylisocyanide and subsequent hydrogenolysis of the obtained O-benzyl derivative. As the closure to the pyrrole ring takes place regiospecifically, this procedure is convenient for preparing verrucarin E labeled with C-isotopes. On the basis of the data obtained from the ¹³C-NMR. spectrum of Verrucarin E labeled with ¹³C at the C(2) and C(3) positions, all the ¹³C-resonances of Verrucarin E could be assigned unambiguously.     

Structure and Metabolic‐Flow Analysis of Molecular Complexity in a 13C‐Labeled Tree by 2D and 3D NMR

Improved signal identification for biological small molecules (BSMs) in a mixture was demonstrated by using multidimensional NMR on samples from ¹³C‐enriched Rhododendron japonicum (59.5 atom%) cultivated in air containing ¹³C‐labeled carbon dioxide for 14 weeks. The resonance assignment of 386 carbon atoms and 380 hydrogen atoms in the mixture was achieved. 42 BSMs, including eight that were unlisted in the spectral databases, were identified. Comparisons between the experimental values and the ¹³C chemical shift values calculated by density functional theory supported the identifications of unlisted BSMs. Tracing the ¹³C/¹²C ratio by multidimensional NMR spectra revealed faster and slower turnover ratios of BSMs involved in central metabolism and those categorized as secondary metabolites, respectively. The identification of BSMs and subsequent flow analysis provided insight into the metabolic systems of the plant.     

Curing chemistry of phenylethynyl‐terminated imide oligomers: Synthesis of 13C‐labeled oligomers and solid‐state NMR studies

4‐(Phenylethynyl‐α,β‐¹³C)phthalic anhydride (PEPA) and ¹³C‐labeled phenylethynyl‐terminated imide (PETI) oligomers were synthesized, and solid‐state ¹³C nuclear magnetic resonance (NMR) spectroscopy was used to determine the structure of cured oligomers. Solid‐state ¹³C NMR spectra were collected before and after thermal curing. Using solid‐state ¹³C NMR difference spectroscopy, several cure products were identified. The observed ¹³C NMR resonances were assigned to four different classes of cure products: aromatics, products from backbone addition (substituted stilbenes and tetraphenylethanes), polyenes, and cyclobutadiene cyclodimers. The effects of postcuring and oligomer chain length on the structure of the cured resins were examined. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3486–3497, 2000