Gold Nano Particle and Reduced Graphene Oxide Composite Modified Carbon Paste Electrode for the Ultra Trace Detection of Arsenic (III)

Gold nanoparticles (AuNPs) and reduced graphene oxide (RGO) composite modified carbon paste electrode (CPE) was prepared by electrodepositing AuNPs over the reduced graphene oxide (RGO) modified carbon paste electrode. The composite material was characterised using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) and atomic force microscopy (AFM) techniques. The nano composite modified electrode was applied for the determination of total As and for the inorganic speciation of As(III) and As(V) in environmental samples. The linear dynamic range was obtained for the determination of As(III) in the present method from 1μgL⁻¹ to 20 μgL⁻¹ and the limit of detection(LOD) in the standard solution was found to be 0.13 μgL⁻¹ for the 300 sec deposition time in 10 mL supporting electrolyte solution. This method was applied for the determination of As (III) in water and soil samples. The results were agreed well with the result obtained from the hydride generation atomic absorption spectrometry.     

Biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyalkanoates) by metabolically engineered Escherichia coli strains

Biosynthesis of polyhydroxyalkanoates (PHAs) consisting of 3-hydroxyalkanoates (3HAs) of 4 to 10 carbon atoms was examined in metabolically engineered Escherichia coli strains. When the fadA and/or fadB mutant E. coli strains harboring the plasmid containing the Pseudomonas sp. 61-3 phaC2 gene and the Ralstonia eutropha phaAB genes were cultured in Luria-Bertani (LB) medium supplemented with 2 g/L of sodium decanoate, all the recombinant E. coli strains synthesized PHAs consisting of C4, C6, C8, and C10 monomer units. The monomer composition of PHA was dependent on the E. coli strain used. When the fadA mutant E. coli was employed, PHA containing up to 63 mol% of 3-hydroyhexanoate was produced. In fadB and fadAB mutant E. coli strains, 3-hydroxybutyrate (3HB) was efficiently incorporated into PHA up to 86 mol%. Cultivation of recombinant fadA and/or fadB mutant E. coli strains in LB medium containing 10 g/L of sodium gluconate and 2 g/L of sodium decanoate resulted in the production of PHA copolymer containing a very high fraction of 3HB up to 95 mol%. Since the material properties of PHA copolymer consisting of a large fraction of 3HB and a small fraction of medium-chain-length 3HA are similar to those of low-density polyethylene, recombinant E. coli strains constructed in this study should be useful for the production of PHAs suitable for various commercial applications.     

Photooxidation of Selected Polycyclic Aromatic Hydrocarbons in Aqueous Organic Media in The Presence of Ti(IV)Oxide

Abstract

We have studied the photooxidation of selected polycyclic aromatic hydrocarbons (PAH) in the presence of Ti(IV)oxide in a mixed solvent system consisting of N-methylpyrrolidinone (NMP) and water. Reaction rates for the photooxidation of acenaphthylene and pyrene were investigated by monitoring the disappearance of the PAH substrate from the reaction mixture as a function of time. For both compounds plots of In C_o/C_t, as a function of time yielded straight lines, indicating first order kinetics with respect to the substrate. With an initial acenaphthylene concentration of 1.0 gL^?1 the first order reaction rate constant was 0.19 hr^?1 and the half life was 3.7 hr. With an initial pyrene concentration of 0.2 gL^?1 the first order reaction rate constant was 0.0285 hr^?1 and the half life was 24 hr. The photoproducts were characterized by high performance liquid chromatography with diode-array detection (HPLC/DAD) and by liquid chromatography/atmospheric pressure chemical ionization mass spectrometry (APCI/LC-MS). Although a number of simple oxidation products were identified the bulk of the photoproducts consisted of the parent PAH substituted with one or more solvent (NMP) molecules. The product mixtures from the photooxidation of the non-mutagens acenaphthylene and pyrene were found to be also non-mutagenic in our Salmonella typhimurium forward mutation assay.     

Improvement of Bioethanol Productivity of Immobilized Saccharomyces Bayanus with Using Sodium Alginate-Graft-Poly(N-Vinyl-2-Pyrrolidone) Matrix

In this study, immobilization conditions and bioethanol production characteristics of immobilized Saccharomyces bayanus were investigated into sodium alginate-graft-poly(N-vinyl-2-pyrrolidone; NaAlg-g-PVP) matrix. The matrix that crosslinked with calcium clorid was used for immobilization of S. bayanus. Bioethanol productivity of the NaAlg-g-PVP matrix was found to increase from 4.21 to 4.84?gL^?1?h^?1 when compared with the convential sodium alginate matrix. The production of bioethanol was affected by initial glucose concentration and percentage of immobilized cell beads in fermentation medium. Bioethanol productivity was increased from 3.62 to 4.84?gL^?1?h^?1 while the glucose concentration increasing from 50 to 100?gL^?1. Due to the increase in percentage from 10 to 20?% of immobilized cell beads in the fermentation medium, bioethanol productivity was increased from 4.84 to 8.68?gL^?1?h^?1. The cell immobilized NaAlg-g-PVP beads were protected 92?% of initial activity after six repeated fermentation.     

Adsorption of cadmium(II) onto goethite and kaolinite in the presence of benzene carboxylic acids

The effect of benzene carboxylic acids on the adsorption of Cd(II) (5×10⁻⁵ M) by goethite and kaolinite has been studied in 0.005 M NaNO₃ at 25°C. The concentrations of phthalic (benzene-1,2-dicarboxylic acid), hemimellitic (1,2,3), trimellitic (1,2,4), trimesic (1,3,5), pyromellitic (1,2,4,5) and mellitic (1,2,3,4,5,6) acids varied from 2.5×10⁻⁵ to 1×10⁻³ M. Mellitic acid complexes Cd(II) strongly above about pH 3, but the other acids only at higher pH, phthalic acid forming the weakest complexes. Phthalic, trimesic and mellitic acids adsorbed strongly to goethite at pH 3, but adsorption decreased at higher pH; however, mellitic acid was still about 50% adsorbed at pH 9, by which the other two were almost entirely in solution. At 10⁻³ M all the acids enhanced the adsorption of Cd(II) to goethite, the higher members of the series being the most effective. The higher members of the series suppressed Cd(II) adsorption onto kaolinite, but phthalic and trimesic acids caused slight enhancement. The effects of mellitic acid on Cd(II) adsorption depended strongly on its concentration. The maximum enhancement of Cd(II) adsorption onto goethite was at 10⁻⁴ M. The greatest suppression of Cd(II) adsorption onto kaolinite was at 10⁻³ M, and at 2.5×10⁻⁵ M mellitic acid enhanced Cd(II) adsorption onto kaolinite at intermediate pH. The results are interpreted in terms of complexation between metal and ligand (acid), metal and substrate, ligand and substrate, and the formation of ternary surface complexes in which the ligand acts as a bridge between the metal and the surface.     

Biopolymer Synthesized by Strains of Xanthomonas sp Isolate from Brazil Using Biodiesel-Waste

The future supplies and usage of glycerol are expected to increase as biodiesel plants increase production, and the output will greatly outpace demand. Biodiesel production has already had a significant impact on the price of refined glycerol. A major concern of glycerol producers is the reduced price of glycerol resulting from the increased production of biodiesel. Some alternative uses for this glycerol that have been investigated are substrates for fermentation process or the production of biosurfactants, fatty acids, biopolymers, and others products. This work had as objective to evaluate two strains of Xanthomonas sp isolate from Brazil for xanthan gum in orbital agitator, analizing the apparent viscosity of aqueous solutions and selecting viscosity. The experiments of xanthan gum production were realized in orbital agitator with 120 rpm agitation, for cells production, and 180rpm, for biopolymer production, under a 28 °C temperature. The rheology of the fermentation broth was analyzed by apparent viscosity and the polymer was recovered with ethanol (1:3, v/v). After its recovery, the productivity evaluation was performed. The productivity were 0.157 and 0.363 gL⁻¹ for C1 and 0.186 and 0.363 gL⁻¹ for C9 to media glycerol or glycerol and sucrose, respectively. The viscosity analysis was performed for aqueous solutions 3%, at 25 °C, the best apparent viscosity was obtained using gum synthesized with glycerol and sucrose (50:50) at 25 °C, 143 mPa.s⁻¹ from Xanthomonas sp C1.     

Effect of C∶N molar ratio on monomer composition of polyhdroxyalk anoates produced by Pseudomonas mendocina 0806 and Pseudomonas pseudoalkaligenus YS1

Polyhydroxyalkanoates (PHAs) are biodegradable polymers produced by bacteria. In this study, the effect of C∶N molar ratio on the monomer composition of PHAs was investigated, including medium chain length PHA produced by Pseudomonas mendocina 0806 and PHA blends consisting of monomers of 3-hydroxybutyrate and medium chain length hydroxyalkan⇘te produced by Pseudomonas pseudoalkaligenus YS1. It was observed that there were some fixed ranges of C∶N molar ratio that affect the monomer composition of PHA independently of the substrate. For strain 0806, the ranges were C∶N <20, 20<C∶N<200, and C∶N>200. The monomer composition was constant among these ranges when using glucose and octanoate as the sole substrate. For strain YS1, the ranges were C∶N<20, 20<C∶N<45, and C∶N>45. These results are useful for controlling monomer composition in PHA production.     

Simultaneous kinetic determination of 3-hydroxybutyrate and 3-hydroxyvalerate in biopolymer degradation processes

A new kinetic method is proposed for the simultaneous determination of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) based on the different rate of the 3-hydroxybutyrate dehydrogenase-catalysed reactions of these compounds with coenzyme NAD⁺. A flow injection system with two reactors of immobilised 3-hydroxybutyrate dehydrogenase and dual detection is used. The concentrations of NADH produced after two different reaction times are measured by fluorometry or spectrophotometry and multivariate linear calibration is applied for quantification. Concentrations of 3HB and 3HV between 1 × 10⁻⁶ and 1 × 10⁻⁴ M can be determined at an average sampling frequency of 20 h⁻¹. In contrast to usual methods, the proposed here makes possible the discrimination of 3HB and 3HV without previous separation so that usual extraction with chlorinated solvents and/or chromatographic separation is not required. The method is of interest in a wide variety of fields concerning PHAs, as it can provide information on the degradation rate and mechanism, composition and structure of these polymers. Its applicability has been proved through the determination of 3HB and 3HV in the digests of some chemically degraded commercial PHAs.     

Thermodegradation of medium-chain-length poly(3-hydroxyalkanoates) produced by Pseudomonas putida from oleic acid

Medium-chain-length poly(3-hydoxyalkanoates) (mcl-PHA), comprising six to fourteen carbon-chain-length monomers, are natural thermoplastic polyesters synthesized by fluorescent pseudomonades. In this study, mcl-PHA was produced by Pseudomonas putida from oleic acid in aerobic shake flask fermentation. Thermal degradation of mcl-PHA was performed at temperatures in the range of 160-180 °C. Thermodynamic parameters of mcl-PHA thermal degradation were determined where degradation activation energy, E_d and pre-exponential factor, A equal to 85.3 kJ mol⁻¹ and 6.07 × 10⁵ s⁻¹, respectively; and exhibited a negative activation entropy (?S) of −139.4 J K⁻¹ mol⁻¹. Titration was carried out to determine the carboxylic terminal concentration and used to correlate number-average molecular weight (M_n) of the polymers. Thermally-degraded PHA contained higher amount of carboxylic terminals and lower M_n compared to the initial PHA and these results coincide with the decreased M_n in GPC analysis. Thermal properties of initial and degraded mcl-PHA were characterized by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The thermal decomposition mechanism was investigated following the analyses of the degradation products using 400-MHz ¹H NMR, FTIR spectroscopy and GC analysis. The overall decomposition reaction is the hydrolysis of ester linkages to produce hydroxyl and carboxylic terminals. A small proportion of unsaturated side chain fragments would undergo oxidative cleavage at CC linkages, producing minor amount of low-molecular weight esters and acids. At higher temperatures, the hydroxyl terminal can undergo dehydration to form an alkenyl terminal.     

Purification and characterization of an extracellular medium-chain length polyhydroxyalkanoate depolymerase from Thermus thermophilus HB8

During growth on medium-chain length (mcl) polyhydroxyalkanoates (PHAs), or on sodium octanoate Thermus thermophilus HB8 produces an extracellular mcl-PHA depolymerase. This enzyme was purified from the culture medium of sodium octanoate-grown cells to electrophoretic homogeneity by hydrophobic interaction chromatography using Octyl-Sepharose CL-4B and gel permeation chromatography using Sephadex G-150. The molecular mass of the purified enzyme was approximately 28 kDa. A part of the gene TTHA1605 encoding a 24.17 kDa protein was demonstrated to encode the mcl-PHA depolymerase of T. thermophilus. The primary amino-acid sequence of purified enzyme reveals similarity to all reported so far extracellular mcl-PHA depolymerases. The purified enzyme could hydrolyze mcl - PHAs and p-nitrophenyl (pNP) esters but not short chain length (scl) - PHAs. The optimum pH range was 7.5-9 and the optimum temperature was 70 °C for pNP-octanoate (pNPO) hydrolysis. The Km value for pNPO was 53.2 μM. The enzyme was strongly inhibited by phenylmethylsulfonyl fluoride (PMSF) and non-ionic detergents (Tween 20, Tween 80 and Triton X-100). The results demonstrated in this study revealed that the mcl-PHA depolymerase from T. thermophilus is a distinct enzyme, which is different from those of other mcl-PHA-degrading bacteria.     

Production of (+)-(S)-Ethyl 3-Hydroxybutyrate and (-)-(R)-Ethyl 3-Hydroxybutyrate by Microbial Reduction of Ethyl Acetoacetate

The production of (S)-ethyl 3-hydroxybutyrate (2) from ethyl acetoacetate (1) in higher yields and with higher optical purity than with the usual procedures was achieved by continuous addition of the substrate 1 and sucrose to an aerated suspension of bakers' yeast. The microbial reduction of 1 by the fungus Geotrichum candidum LINK yields - for the first time - the antipode 3 .     

Novel block copolymers of atactic PHB with natural PHA for cardiovascular engineering: Synthesis and characterization

Low-molecular weight macroinitiators derived from natural poly(3-hydroxyalkanoates) (PHAs), which contain olefinic and activated by 18-crown-6 ether carboxylic end groups, were used in anionic ring opening polymerization (ROP) of racemic β-butyrolactone and new diblock copolymers of selected PHAs (PHB, PHBV, PHO) with atactic poly[(R,S)-3-hydroxybutyrate] (a-PHB) were obtained. These novel copolymers were characterized using ¹H NMR, GPC and DSC. Hydrolytic degradation studies of selected copolymers were also performed. Finally, the suitability of these polymeric materials for cardiovascular engineering and as blend compatibilizers was demonstrated.     

PoPD Modified ITO Based Capacitive Immunosensor for Sulphathiazole

A capacitive immunosensor for determination of sulphathaizole (STZ) has been developed on polymer coated indium tin oxide glass chip (ITO). The immunosensor chip was fabricated by polymerizing, ortho‐ phenylenediamine (o PD) on ITO followed by surface modification with anti‐sulphathiazole antibody. The developed immunosensor chip was characterized by using Atomic force microscopy (AFM), Cyclicvoltammetry (CV) and Electrochemical impedance spectroscopy (EIS). The capacitive measurement of the developed immunosensor was performed by using EIS in spiked drinking water and milk. The developed sensor showed liner detection range 0.1‐100 μgL⁻¹for STZ with a limit of detection 0.01 μgL⁻¹ in water with recovery between 95–106 %. The biosensor showed excellent selectivity and storage stability upto 4 weeks when preserved at 4 °C.     

Determination of cobalt in water samples by photoacoustic spectroscopy with a solid-phase spectrophotometry approach using 3-(2-pyridyl)-5,6-bis(4-sulfophenyl)-1,2,4-triazine

This work forms part of an investigation which seeks to determine metal complexes in a solid phase by photoacoustic spectrometry (PAS). Results of spectral determination of Co(II) complexes are introduced. The method is based on Co(II) colorimetric reaction with 3-(2-pyridyl)-5,6-bis(4-sulfophenyl)-1,2,4-triazine (FST, ferrozine) retained on an anion-exchange resin, DEAE Sephadex A-25. The immobilization of Co(II) on the solid phase is combined with PAS measurement. A numerical approach is applied to reduce noise in the spectral data. At λ = 477 nm, the calibration for Co(II) is linear over the range 14–300 μgL^{− 1}. The Co(II) concentration in water samples was determined by conventional photoacoustic measurement. The relative standard deviation (R.S.D.) of the method for the calibration is < 5%. Under optimized conditions, the obtained analytical features were LOD 14 μgL^{− 1} and LOQ 45 μgL^{− 1}.     

Minimization of mass interferences in quadrupole inductively coupled plasma mass spectrometric (ICP-MS) determination of palladium using a flow injection on-line displacement solid-phase extraction protocol

A flow injection on-line displacement solid-phase extraction protocol was employed to minimize mass interferences with determination of palladium by inductively coupled plasma mass spectrometry (ICP-MS). The developed method involved in on-line complexing of Ag⁺ with pyrrolidine dithiocarbamate (PDC), presorption of the resultant Ag–PDC onto a microcolumn packed with the cigarette filter, displacement sorption of Pd²⁺ through loading the sample solution onto the microcolumn due to on-line displacement reaction between Pd²⁺ and the presorbed Ag–PDC, elution of the retained Pd²⁺ with 50 μL of ethanol for on-line ICP-MS detection. Interferences from co-existing heavy metal ions with lower stability of their PDC complexes relative to Ag–PDC were minimized/eliminated. No interferences from 5 mg L^− 1 Zn and 3 mg L^− 1 Pb for ¹⁰⁴Pd, 0.4 mg L^− 1 Cu for ¹⁰⁵Pd, 6 mg L^− 1 Zn and 2 mg L^− 1 Cd for ¹⁰⁶Pd, 6 mg L^− 1 Zn and 3 mg L^− 1 Cd for ¹⁰⁸Pd, and 2 mg L^− 1 Cd for ¹¹⁰Pd were observed for the determination of 100 ng L^− 1 Pd. The enhancement factors of 71–75, sample throughput of 23 samples h^− 1 and detection limits of 2.8–3.5 ng L^− 1 were achieved with the consumption of 3.0 mL of sample solution. The precision (RSD) for eleven replicate determinations of Pd at the 100 ng L^− 1 level was 1.8–2.7%. The developed method was applied to the determination of palladium in rock samples.     

Kinetics and mechanism of oxidation of ethylenediamine and related compounds by diperiodatoargentate (III) ion

The oxidation of ethylenediamine by diperiodatoargentate (III) ion has been studied by stopped‐flow spectrophotometry. Kinetics of this reaction involves two steps. The first step is the complexation of silver (III) with the substrate and is over in about 10 ms. This is followed by a redox reaction in the second step that occurs intramolecularly from the substrate to the silver (III) center. The rate of reduction of silver (III) species by ethylenediamine, ethanolamine, and 1,2‐ethanediol were observed to be 1.2 × 10⁴, 1.1 × 10², and 0.14 dm³ mol⁻¹ s⁻¹, respectively, at 20°C. The reaction rate shows an inverse dependence on [IO] and [OH⁻] in the low concentration range (≤1 × 10^‐3 mol dm⁻³). At higher [OH⁻] (>1 × 10⁻³ mol dm⁻³) the rate of reaction starts increasing and attains a limiting value at very high [OH⁻]. The rate of deamination of ethylenediamine is enhanced by its complexation with silver (III). The involvement of [Ag^III(H₂IO₆) (H₂O)₂] and [Ag^III(H₂IO₆) (OH)₂]²⁻ are suggested as the reactive silver (III) species kinetically in mild basic and basic conditions, respectively. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 286–293, 2000     

Complex formation of Ni(II) and Fe(III) with the nitrite anion

The stepwise stabilities of the complexes formed by Ni(II) and Fe(III) with the nitrite anion have been determined potentiometrically in an aqueous sodium perchlorate medium of unit ionic strength at 25.0°C. Two fairly weak mononuclear complexes are formed in the Ni(II)-nitrite system with the overall formation constants at β₁ = 5.9±0.9 M⁻¹ and β₂ = 12±2 M⁻², while for the Fe(III)-nitrite system three mononuclear complexes of moderate strengths, namely β₁ = (3.9±0.7) × 10² M⁻¹, β₂ = (5±2) × 10³ M⁻² and β₃ = (2.8±0.6) × 10⁵ M⁻³, are found. No evidence has been found for the formation of polynuclear or acid complexes in the concentration range studied.     

Theoretical prediction of Ni(I)-catalyst for hydrosilylation of pyridine and quinoline

Catalytic synthesis of dihydropyridine by transition-metal complex is one of the important research targets, recently. Density functional theory calculations here demonstrate that nickel(I) hydride complex (bpy)Ni^IH (bpy = 2,2′-bipyridine) 1 is a good catalyst for hydrosilylation of both quinoline and pyridine. Two pathways are possible; in path 1, substrate reacts with 1 to form stable intermediate Int1 . After that, N³─C¹ bond of substrate inserts into Ni─H bond of 1 via TS1 to afford N-coordinated 1,2-dihydroquinoline Int2 with the Gibbs activation energy (ΔG°^‡) of 21.8 kcal mol⁻¹. Then, Int2 reacts with hydrosilane to form hydrosilane σ-complex Int3 ; this is named path 1A. In the other route (path 1B), Int1 reacts with phenylsilane in a concerted manner via hydride-shuttle transition state TS2 to afford Int3 . In TS2 , Si atom takes hypervalent trigonal bipyramidal structure. Formation of hypervalent structure is crucial for stabilization of TS2 (ΔG°^‡ = 17.3 kcal mol⁻¹). The final step of path 1 is metathesis between Ni─N³ bond of Int3 and Si─H bond of PhSiH₃ to afford N-silylated 1,2-dihydroproduct and regenerate 1 (ΔG°^‡ = 4.5 kcal mol⁻¹). In path 2, 1 reacts with hydrosilane to form Int5 , which then forms adduct Int6 with substrate through Si–N interaction between substrate and PhSiH₃. Then, N-silylated 1,2-dihydroproduct is produced via hydride-shuttle transition state TS5 (ΔG°^‡ = 18.8 kcal mol⁻¹). The absence of N-coordination of substrate to Ni^I in TS5 is the reason why path 2 is less favorable than path 1B. Quinoline hydrosilylation occurs more easily than pyridine because quinoline has the lowest unoccupied molecular orbital at lower energy than that of pyridine. © 2019 Wiley Periodicals, Inc.     

Spectrophotometric determination of cobalt with dipyridylglyoxal mono(2-pyridyl)hydrazone

A method for the Spectrophotometric determination of cobalt with dipyridylglyoxal mono(2-pyridyl)hydrazone (DMPH) has been devised. The orange-reddish Co-DMPH chelate (ϵ = 2.7 × 10⁴ liters mol⁻¹ cm⁻¹ at 490 nm) is formed at pH 3–7 in a solution containing 24% (v/v) ethanol. This complex, on addition of a strong acid, shows a bathochromic shift from 490 to 505 nm. A fair degree of selectivity for cobalt is achieved by measuring the absorbance of the orange-reddish coloration at 510 nm (isosbestic point wavelength; ϵ = 2.6 × 10⁴ liters mol⁻¹ cm⁻¹) in solutions of final acidity about 1 M in perchloric acid.     

Use of headspace solid-phase microextraction for the quantification of poly(3-hydroxybutyrate) in microbial cells

Biopolymers such as poly(hydroxyalkanoates) (PHAs) have received much attention due to their physico-chemical properties, biodegradability, and biocompatibility that make them good candidates for industrial and medical applications. Produced by some microorganisms PHAs accumulate within the cells of these organisms. The optimization of microbial processes to produce PHAs at a lower cost requires rapid and accurate techniques for quantification of the biopolymer in biomass. The present study describes a method based on solid-phase microextraction (SPME) coupled to gas chromatography (GC) for the determination of poly(3-hydroxybutyrate) (PHB) in Alcaligenes latus cells. First PHB was depolymerized by either methanolic or hydrolytic digestion into methyl 3-hydroxybutyrate (Me-3-HB) or crotonic acid (CA), respectively. The resulting analytes were then subjected to analysis by headspace SPME/GC with flame ionization detection (FID). The two depolymerization/SPME/GC-FID methods were optimized and applied to the analysis of PHB in bacterial biomass harvested from a fermentation process that uses A. latus. Results were compared with those obtained using GC-FID analysis of MeOH/CHCl(3) digested samples. Excellent agreement was found between the three methods but the two SPME-based methods were environmentally friendly and easier to perform.