共查询到20条相似文献,搜索用时 15 毫秒
1.
Kyu Ho Chae Kyung Hee Sung 《Journal of polymer science. Part A, Polymer chemistry》2004,42(4):975-984
A polymeric photobase generator containing oxime–urethane groups was prepared by copolymerization of methyl methacrylate and methacryloxyethyl benzophenoneoxime urethane, and its photo and thermal crosslinking reaction after irradiation was examined from the measurement of UV and IR absorption spectral changes, insoluble fraction, and molecular weight changes. The photo‐crosslinking reaction of the copolymer film was more efficient when irradiations were carried out with 310 nm UV light in the presence of benzophenone than with 254 nm UV light without the addition of benzophenone. The crosslinking reaction increased after postexposure baking (PEB), and this thermal crosslinking reaction mechanism was studied from the identification of the photolysis products of a model compound, benzophenoneoxime phenylurethane, by a high‐performance liquid chromatography. The results indicate that the thermal crosslinking reaction of the copolymer after PEB is due to the formation of urea‐type chemical bonds. Resist properties of the copolymer were examined from the measurement of normalized thickness and micropattern development. A negative tone image with a resolution of 2 μm was obtained with this copolymer, having a sensitivity (D) of 1200 mJ/cm2 and contrast (γn) of 1.31, when irradiation was carried out with 310 nm UV light in the presence of benzophenone following chloroform development. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 975–984, 2004 相似文献
2.
The photo-crosslinking reaction of a polymeric photobase generator containing phthalimido carbamate (PC) groups was studied and applied to the formation of a negative type micropattern. The copolymer containing PC groups was prepared through the polymerization of methyl methacrylate and phthalimido methacryloxyethylcarbamate (PMC). The photochemical and cross-linking reaction of the copolymer film were studied using the UV and IR absorption spectral changes along with the normalized thickness measurements upon irradiation. The copolymer film was effectively cross-linked upon irradiation with 254 nm UV light, and the cross-linking reaction progressed further with increasing irradiation dose and the amount of PMC units in the copolymer. The photochemical formation of the isocyanato groups was evidenced by comparing the IR absorption spectral changes of the exposed and masked copolymer film. The photo-crosslinking reaction of the copolymer was further studied by using a model compound. The results indicated that the cross-linking reaction occurred because of the formation of urea-type chemical bonds, which were produced through the reaction of the photochemically produced isocyanato and amino groups in the copolymer. A negative micropattern was obtained by using the photo-crosslinking reaction. 相似文献
3.
Image recording material based on the polymeric photobase generator containing oxime‐urethane groups
Kyu Ho Chae Jung Choon Gwark Taihyun Chang 《Macromolecular rapid communications》2000,21(15):1007-1012
A polymeric photobase generator containing oxime‐urethane groups was prepared from copolymerization of MMA with N‐[4‐(benzophenoneoximino‐carbonylamino)phenyl]maleimide, a maleimide monomer containing oxime‐urethane group, and its properties as an image recording material were studied. The irradiation of this copolymer with UV light dissociates the urethane linkage to result in the formation of aromatic amino groups, which can be developed by the diazo‐coupling reaction. Various colors could be developed depending on the phenolic coupling reagents as the developer. 相似文献
4.
Kyu Ho Chae Hee Jung Jang 《Journal of polymer science. Part A, Polymer chemistry》2002,40(8):1200-1207
Copolymers containing oxime‐urethane groups were prepared by the copolymerization of methyl methacrylate and benzophenoneoximinocarbonylaminoethyl methacrylate (BCM), and their photochemical properties were examined from the UV and IR absorption spectral changes. The decomposed fraction of oxime‐urethane groups in the copolymer increased with irradiation time, but it decreased with the content of BCM units in the copolymer. Changes of the surface properties of the copolymer film on irradiation were studied by measurements of the contact angle and dyeing with an acid dye. The surface of the copolymer film changed to become more hydrophilic upon irradiation with 254 nm of UV light. After the irradiated copolymer films were treated with HCl or methanol, changes of the contact angle of water on irradiation were compared. The copolymer film was dyed by acid dyes after treatment of the irradiated film with HCl. The degree of dyeing increased with irradiation time and BCM units in the copolymer, but it was unaffected by the film thickness. Various colors were developed on the irradiated area depending on the acid dye as the developer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1200–1207, 2002 相似文献
5.
Benzophenone group was introduced into the gel system in order to fabricate a new ALS2 organogel which was photo-responsive. In the gel state with mixed solvent of acetone and water (5%), helical fibres were formed. The light control on the morphological change from fibres to core–shell spheres was followed by transmission electron microscope, which supplied a new paradigm for the morphology control triggered by stimulus. Moreover, the gel could serve as light absorbent without being mixed with polymer. 相似文献
6.
A new resin incorporating benzimidazolylazo group into a matrix of polystyrene divinylbenzene has been prepared. The exchange capacity of the resin for the ions mercury(II), silver(I) and palladium(II) as a function of pH has been determined. The resin exhibits no affinity for alkali or alkaline earth metals. It is highly selective for Hg(II), Ag(I) and Pd(II). In column operation, it has been observed that Hg(II), Ag(I) and Pd(II) in trace quantities can be selectively separated from geological, medicinal and environmental samples. 相似文献
7.
V. E. Kononenko B. E. Zhitar' S. N. Baranov 《Chemistry of Heterocyclic Compounds》1973,9(11):1350-1351
New merocyanine dyes containing selenazolidine and tetrahydroselenazine rings have been obtained. As compared with the analogous dyes of the isorhodanine series the long-wave maxima of their IR spectra have bathochromic shifts.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1493–1494, November, 1973. 相似文献
8.
1,5,7-Triazabicyclo[4.4.0]dec-5-ene (TBD) with pKa of 26.03 in acetonitrile can be effectively released by photolysis of TBD.HBPh4 salt, which represents a new family of short-wave UV photobase generators. This photobase generator enables the photoinduced living ring-opening polymerization of cyclic esters and the photoinduced cross-linking of various polymeric materials containing the hydroxyl-ester groups. 相似文献
9.
The photopatternability of various silyl hydride containing organosilicone resins containing the photobase generators N‐methylnifedipine or O‐(2‐nitrobenzyl)‐N‐octyl carbamate have been examined, with the goal of identifying potential photopatternable compositions with high thermal stability after cure. Two different categories of silicone resins have been prepared from combinations of diphenylsiloxane and methyl and hydrogen silsesquioxane units and a combination of phenyl and hydrogen silsesquioxane monomer units. The photobase generators were incorporated into these resins at concentrations up to 10 weight percent. UV‐irradiation of micrometer thick silicone resin‐photobase films through a photomask, under an air atmosphere, yielded micrometer scale features after development. Photopatternable compositions have been identified with photosensitivities of less than 50 mJ/cm2. The photopatterning process is believed to proceed by base‐catalyzed reaction of resin‐based silanol groups with neighboring silyl hydride groups to yield thermally stable siloxane crosslinks. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
10.
Takeo Sasaki Hiroaki Yaguchi 《Journal of polymer science. Part A, Polymer chemistry》2009,47(2):602-613
The photoinduced depolymerization of poly(olefin sulfone)s was investigated. Poly(olefin sulfone)s possessing base‐amplifying groups were synthesized. A photobase‐generating compound was mixed with poly(olefin sulfone)s and irradiated with 254 nm UV light. The decomposition ratio was significantly enhanced in poly(olefin sulfone)s that possessed base‐amplifying groups. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 602–613, 2009 相似文献
11.
A novel isotope labeling reagent d0-/d6-2, 4-dimethoxy-6-piperazin-1-yl pyrimidine (DMPP) has been developed for derivatization toward the carboxyl group based on carbodiimide chemistry for mass spectrometry (MS) analysis. The strengths of this derivatization strategy involve fast labeling (15 s), low chemical background and general access to most carboxylic analytes. This has been demonstrated using a series of compounds containing carboxylic acids, including peptides and proteins. To enhance the MS response of the derivatized analytes, the design of DMPP has been based on integration of the theoretical consideration of high gas-phase hydrogenation capacity and hydrophobicity. In addition, the high abundance product ions at m/z 225 and m/z 231 from d0-/d6-DMPP labeled carboxylic acids indicate high efficiency of the gas-phase cleavage induced by the labeling reagent. Quantitative determination of these ions can also be used in single reaction monitoring to achieve extremely high sensitivity toward the target analytes. This has subsequently been used to determine trace free fatty acids in human urine. Furthermore, the DMPP labeled peptides also provide additional sequence information in MALDI–MS/MS because of the formation of sequence-related isotope fragment ions. This DMPP-oriented labeling technique is expected to be a promising tool for the MS detection of many varieties of compounds containing carboxyl groups. 相似文献
12.
Tomohito Ogura Tomoya Higashihara Mitsuru Ueda 《Journal of polymer science. Part A, Polymer chemistry》2010,48(6):1317-1323
A negative‐type photosensitive polyimide (PSPI) based on semialicyclic poly(amic acid) (PAA), poly(trans‐1,4‐cyclohexylenediphenylene amic acid), and {[(4,5‐dimethoxy‐2‐nitrobenzyl)oxy]carbonyl} 2,6‐dimethylpiperidine (DNCDP) as a photobase generator has been developed as a next‐generation buffer coat material. The semialicyclic PAA was synthesized from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride and trans‐1,4‐cyclohexyldiamine in the presence of acetic acid, and the PAA polymerization solution was directly used for PSPI formulation. This PSPI, consisting of PAA (80 wt %) and DNCDP (20 wt %), showed high sensitivity of 70 mJ/cm2 and high contrast of 10.3, when it was exposed to a 365‐nm line (i‐line), postexposure baked at 190 °C for 5 min, and developed with 2.38 wt % tetramethylammonium hydroxide aqueous solution containing 20 wt % isopropanol at 25 °C. A clear negative image of 6‐μm line and space pattern was printed on a film, which was exposed to 500 mJ/cm2 of i‐line by a contact printing mode and fully converted to poly(trans‐1,4‐cyclohexylenebiphenylene imide) pattern upon heating at 250 °C for 1 h. The PSPI film had a low coefficient of thermal expansion of 16 ppm/K compared to typical PIs, such as prepared from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride and 4,4′‐oxydianiline. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1317–1323, 2010 相似文献
13.
Deepak M. Maher Samadhan S. Nagane Uday A. Jadhav Pravin H. Salunkhe Bhausaheb V. Tawade Prakash P. Wadgaonkar 《Journal of polymer science. Part A, Polymer chemistry》2019,57(14):1516-1526
Expanding on our strategy to synthesize aromatic step‐growth polymers containing pendant clickable azido groups via functional monomer approach, we have now designed and synthesized a new cardo bisphenol, viz., 2‐(2‐azidoethyl)‐3, 3‐bis(4‐hydroxyphenyl) isoindolin‐1‐one (PPH‐N3). PPH‐N3 was conveniently synthesized starting from commercially available phenolphthalein by a three‐step route in an overall yield of 65% using simple organic transformations. Aromatic (co)polyesters bearing pendant azido groups were synthesized by low‐temperature solution polycondensation of PPH‐N3 or different molar ratios of PPH‐N3 and bisphenol‐A (BPA) with aromatic diacid chlorides in dry dichloromethane in the presence of triethylamine (TEA) as a base. The formation of medium to reasonably high‐molecular‐weight (co)polyesters was evidenced from intrinsic viscosity and number‐average molecular‐weight measurements that were in the range 0.52–0.85 dL/g and 16,700–28,200, respectively. Tough, transparent, and flexible films could be cast from chloroform solutions of these (co)polyesters. (Co)polyesters were characterized using FTIR, 1H NMR, 13C NMR spectroscopy, XRD, and TGA. The thermal curing reaction of (co)polyesters involving decomposition of azido groups was studied by DSC analysis. The chemical modification of a representative copolyester containing pendant azido groups was carried out quantitatively using catalyst‐free azide‐maleimide cycloaddition reaction with two maleimides, namely, N‐methylmaleimide and N‐hexylmaleimide. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1516–1526 相似文献
14.
myo-Inositol was covalently bound on, an epoxy-activated sepharose. In order to elucidate the structure of the derivative of sepharose formed, in a model reactionmyo-inositol was coupled to propylene oxide, whereby two compounds were obtained. By NMR-spectroscopy,13C-resonancespectroscopy and gas chromatography substanceI could be characterized as a mixture of two isomers. Both are the product of a binding to the hydroxyl group on C-atom 2 ofmyo-inositol. The only difference seems to be the point of attachment to the side chain. SubstanceII, however, originates by substitution on an equitorial hydroxyl group. The application of this new affinity gel is reported.
Ein neues Sepharose-Derivat mit kovalent gebundenem myo-Inosit: Struktur und Anwendung
Zusammenfassung myo-Inosit wurde an eine epoxy-aktivierte Sepharose kovalent gebunden. Zur Aufklärung der Struktur dieses Sepharosederivats wurde in einer Modellreaktionmyo-Inosit an Propylenoxid gekoppelt, wobei zwei Substanzen erhalten wurden. Durch NMR-Spektren,13C-Resonanzspektren und Gaschromatographie konnte SubstanzI als Gemisch zweier Isomerer charakterisiert werden. Beide sind durch Derivatisierung, am C-Atom 2 des Inosits entstanden, sie unterscheiden sich nur im Ort der Bindung an der Seitenkette. Bei SubstanzII ist hingegen die Substitution an einem äquatorialen O-Atom eingetreten.Es wird über die Anwendung des neuen Affinitätsgels berichtet.相似文献
15.
16.
Yasuyuki Aikawa 《Radiation Physics and Chemistry》2000,57(3-6):609-612
In February 1998, located at Izumiohtsu-Osaka, the West-Japan Irradiation Service Co. Ltd (W-JISCO) opened the new facility “Kansai Electron Beam Irradiation Center” which is the irradiation service center by Electron Beam and X-ray (Bremsstrahlung). The distinguishing feature of this facility is the No. 2 beam line for X-ray conversion. 相似文献
17.
Xu Y Wu J Sun W Tao D Yang L Song Z Weng S Xu Z Soloway RD Xu D Xu G 《Chemistry (Weinheim an der Bergstrasse, Germany)》2002,8(23):5323-5331
Strong electronic Raman bands corresponding to the transition between 4I9/2 and 4I11/2 manifolds of Nd3+, caused by a Raman-enhancement effect, are observed in the FT-Raman spectrum of Nd2O3. Neither resonance enhancement (RR) nor surface enhancement (SERS) accounts for the Raman enhancement observed here. We propose a new mechanism of Raman enhancement called the "feed-back" mechanism. A YAG laser excites the final state of the Raman transition (4I11/2 of Nd3+) to the 4F3/2 state and causes a significant decrease in the population of Nd3+ at the 4I11/2 state. This causes the population ratio of Nd3+ at 4I9/2 and 4I11/2 to deviate from the value required by Boltzmann's law. To restore equilibrium, Raman scattering is enhanced so that more Nd3+ ions are brought from the 4I9/2 state to the 4I11/2 state. This hypothesis gets support from the temperature-variable FT-Raman spectroscopic results. Additionally, obvious differences between the Stokes and anti-Stokes Raman spectrum of Nd3+ provide further evidence to support the feed-back mechanism. The Raman-enhancement effect confers on the electronic Raman bands a special ability to reflect the variation of coordinated structure around metal ions. The structural variations in polymer-metal ion composites and biomineralization systems have been investigated by using the electronic Raman bands. 相似文献
18.
A new membrane ion selective electrode sensitive to selenite ion has been developed. The electrode consisted of 1,2-phenylenediamine selen complex PIS (piaselenol) as the active material, PVC or SR (silicon rubber) as membrane matrix and DBF (dibutylphtalate) as plasticizer. This electrode showed linear response for selenite ion in the 10(-5)-10(-1)M concentration range. The slope of the linear portion was 21 mV/10-fold change in selenite concentration. The effect of membrane composition and membrane thickness on electrode response was studied and the electrode which contains 2% PIS, 49% PVC and 49% DBF was found to be the most sensitive one to selenite. The slope of the electrode did not change for 2 months and the pH change did not affect the response of the electrode in pH range of 3-9. The interferences of SO(4)(2-), SO(3)(2-), S(2-), HPO4(2-), CI(-), Br(-), and I(-) are investigated and while no interference was observed for SO(4)(2-), SO(3)(2-), S(2-) and I(-), a very small interference was observed for CI(-) and Br(-). The selenium present in anodic slime is determined using this electrode. 相似文献
19.
20.
<正>Two new cage compounds,4-trinitroethyl-10-nitro-2,6,8,12-tetraacetylhexaazaisowurtzitane(3) and 4-trinitroethyl- 2,6,8,10,12-pentanitrohexaazaisowurtzitane(4),containing trinitromethyl group were synthesized by a novel method,and their structures were confirmed by IR,~1H NMR,MS and single crystal X-ray.DSC result shows that compound 4 has surprising thermal stability and could be a potential energetic compound. 相似文献