Friction and normal interaction forces between irreversibly attached weakly charged polymer brushes

Polyelectrolyte brushes were built on mica by anchoring polystyrene-poly(acrylic acid) (PS-b-PAA) diblock copolymers at a controlled surface density in a polystyrene monolayer covalently attached to OH-activated mica surfaces. Compared to physisorbed polymer brushes, these irreversibly attached charged brushes allow the polymer grafting density to remain constant upon changes in environmental conditions (e.g., pH, salt concentration, compression, and shear). The normal interaction and friction forces as a function of surface separation distance and at different concentrations of added salt (NaCl) were investigated using a surface forces apparatus. The interaction force profiles were completely reversible both on loading and receding and were purely repulsive. For a constant polymer grafting density, the influence of the polyelectrolyte charges and the Debye screening effect on the overall interaction forces was investigated. The experimental interaction force profiles agree very well with scaling models developed for neutral and charged polymer brushes. The variation of the friction force between two PAA brushes in motion with respect to each other as a function of surface separation distance appeared to be similar to that observed with neutral brushes. This similarity suggests that the increase in friction is associated with an increase in mutual interpenetration upon compression as observed with neutral polymers. The effect of the PAA charges and added ions was more significant on the repulsive normal forces than on the friction forces. The reversible characteristics of the normal force profiles and friction measurements confirmed the strong attachment of the PAA brushes to the mica substrate. High friction coefficients (ca 0.3) were measured at relatively high pressures (40 atm) with no surface damage or polymer removal.     

Synthesis and swelling behavior of pH-responsive polybase brushes

We synthesize polybase brushes and investigate their swelling behavior. Poly(2-(dimethylamino)ethyl methacrylate)) (PDMAEMA) brushes are prepared by the "grafting from" method using surface-initiated Atom Transfer Radical Polymerization to obtain dense brushes with relatively monodisperse chains (PDI = 1.35). In situ quaternization reaction can be performed to obtain poly(2-(trimethylamino)ethyl methacrylate)) (PTMAEMA) brushes. We determine the swollen thickness of the brushes using ellipsometry and neutron reflectivity techniques. Brushes are submitted to different solvent conditions to be investigated as neutral brushes and weak and strong polyelectrolyte brushes. The swelling of the brushes is systematically compared to scaling models. It should be pointed out that the scaling analysis of different types of brushes (neutral polymer and weak and strong polyelectrolyte brushes) is performed with identical samples. The scaling behavior of the PDMAEMA brush in methanol and the PTMAEMA brush in water is in good agreement with the predicted scaling laws for a neutral polymer brush in a good solvent and a polyelectrolyte brush in the osmotic regime. The salt-induced contraction of the quaternized brush is observed for high salt concentration, in agreement with the predicted transition between the regimes of the osmotic brush and the salted brush. From the crossover concentration, we calculate the effective charge ratio of the brush following the Manning counterion condensation. We also use PDMAEMA brushes as pH-responsive polybase brushes. The swelling behavior of the polybase brush is intermediate with respect to the behavior of the neutral polymer brush in a good solvent and the behavior of the quenched polyelectrolyte brush, as expected. The effective charge ratio of the PDMAEMA brush is determined as a function of pH using the scaling law of the polyelectrolyte brush in the osmotic regime.     

Polyelectrolyte Multilayers on Weak Polyelectrolyte Brushes

The interaction of surface‐attached weak polyelectrolyte brushes, grown directly from the surface of a solid substrate by surface‐initiated polymerization, with weak polyelectrolyte molecules in solution is studied. In addition, the formation of PEL multilayers onto such brush substrates is investigated. A strong template effect is observed and the thickness of each adsorbed layer is closely related to the thickness of the initial brush. Thus monolayers of more than 100 nm can be adsorbed in one single dipping cycle.

Layer thickness of PEI layers adsorbed to PMAA brushes as a function of the thickness of the surface‐attached monolayer. The solid line represents a case in which the PEI layer has exactly the same thickness as the brush monolayer.     

Electrolyte-induced collapse of a polyelectrolyte brush

We have investigated the electrolyte-induced collapse of a polyelectrolyte brush covalently attached to a planar solid surface. Positively charged poly-4-vinyl [N-methyl-pyridinium] (MePVP) brushes were prepared in situ at the surface by free radical chain polymerization using a surface-immobilized initiator monolayer ("grafting from" technique) and 4-vinylpyridine as the monomer, followed by a polymer-analogous quaternization reaction. The height of the brushes was measured as a function of the external salt concentration via multiple-angle null ellipsometry. As predicted by mean-field theory, the height of the MePVP brushes remains unaffected by the addition of low amounts of external salt. At higher salt concentrations the brush height decreases. The extent to which the brush shrinks strongly depends on the nature of the salt present in the environment. MePVP brushes collapse to almost the dry layer thickness upon the addition of potassium iodide to a contacting aqueous medium. In contrast, the collapse of MePVP brushes having bromide or chloride counterions is much less pronounced. These brushes remain in a highly swollen state even after large amounts of salt have been added to the solution.     

Mesoscale simulations of the behavior of charged polymer brushes under normal compression and lateral shear forces

Dissipative particle dynamics (DPD) was used to investigate the behavior of two opposing end-grafted charged polymer brushes in aqueous media under normal compression and lateral shear. The effect of polymer molecular weight, degree of ionization, grafting density, ionic strength, and compression on the polymer conformation and the resulting shear force between the opposing polymer layers were investigated. The simulations were carried out for the poly(tert-butyl methacrylate)-block-poly(sodium sulfonate glycidyl methacrylate) copolymer, referred as PtBMA-b-PGMAS, end-attached to a hydrophobic surface for comparison with previous experimental data. Mutual interpenetration of the opposing end-grafted chains upon compression is negligible for highly charged polymer brushes for compression ratios ranging from 2.5 to 0.25. Under electrostatic screening effects or for weakly charged polymer brushes, a significant mutual interpenetration was measured. The variation of interpenetration thickness with separation distance, grafting density, and polymer size follows the same scaling law as the one observed for two opposing grafted neutral brushes in good solvent. However, compression between two opposing charged brushes results in less interpenetration relative to neutral brushes when considering equivalent grafting density and molecular weight. The friction coefficient between two opposing polymer-coated surfaces sliding past each other is shown to be directly correlated with the interpenetration thickness and more specifically to the number of polymer segments within the interpenetration layer.     

环境响应性聚合物刷的制备与应用

聚合物在材料表面通过物理吸附或化学接枝所形成的刷子状单分子层被称为聚合物刷,环境响应性聚合物刷能够根据环境微小变化可逆改变自身的物理化学性质,高分子链构象呈现伸展或塌缩状态等,显示了潜在的应用价值。本文综述了环境响应性聚合物刷的研究进展,讨论了温度响应性、pH值响应性、光响应性聚合物刷的结构特征和环境响应性机制,以及聚合物刷的各种制备方法,并着重介绍了其在智能膜、药物控释、催化、自组装、分子器件等领域的应用。     

Single ion diffusive transport within a Poly(styrene sulfonate) polymer brush matrix probed by fluorescence correlation spectroscopy

Diffusive transport within complex environments is a critical piece of the chemistry occurring in such diverse membrane systems as proton exchange and bilayer lipid membranes. In the present study, fluorescence correlation spectroscopy was used to evaluate diffusive charge transport within a strong polyelectrolyte polymer brush. The fluorescent cation rhodamine-6G was used as a counterion probe molecule, and the strong polyelectrolyte poly(styrene sulfonate) was the polymer brush. Such strong polyelectrolyte brushes show promise for charge storage applications, and thus it is important to understand and tune their transport efficiencies. The polymer brush demonstrated preferential solvation of the probe counterion as compared to solvation by the aqueous solvent phase. Additionally, diffusion within the polymer brush was strongly inhibited, as evidenced by a decrease in diffusion constant of 4 orders of magnitude. It also proved possible to tune the transport characteristics by controlling the solvent pH, and thus the ionic strength of the solvent. The diffusion characteristics within the charged brush system depend on the brush density as well as the effective interaction potential between the probe ions and the brush. In response to changes in ionic strength of the solution, it was found that these two properties act in opposition to each other within this strong polyelectrolyte polymer brush environment. A stochastic random walk model was developed to simulate interaction of a diffusing charged particle with a periodic potential, to show the response of characteristic diffusion times to electrostatic field strengths. The combined results of the experiments and simulations demonstrate that responsive diffusion characteristics in this brush system are dominated by changes in Coulombic interactions rather than changes in brush density. More generally, these results support the use of FCS to evaluate local charge transport properties within polyelectrolyte brush systems, and demonstrate that the technique shows promise in the development of novel polyelectrolyte films for charge storage/transport materials.     

Surface forces between telechelic brushes revisited: the origin of a weak attraction

Telechelic polymers are useful for surface protection and stabilization of colloidal dispersions by the formation of polymer brushes. A number of theoretical investigations have been reported on a weak attraction between two telechelic brushes when they are at the classical contact, i.e., when the surface separation is approximately equal to the summation of the brush thicknesses. While recent experiments have confirmed the weak attraction between telechelic brushes, its origin remains elusive because of conflicting approximations used in the previous theoretical calculations. In this paper, we have investigated the telechelic polymer-mediated surface forces by using a polymer density functional theory (PDFT) that accounts for both the surface-adhesive energy and segment-level interactions specifically. Within a single theoretical framework, the PDFT is able to capture both the depletion-induced attraction in the presence of weakly adhesive polymers and the steric repulsion between compressed polymer brushes. In comparison of the solvation forces between telechelic brushes with those between brushes formed by surfactant-like polymers and with those between two asymmetric surfaces mediated by telechelic polymers, we conclude that the weak attraction between telechelic brushes is primarily caused by the bridging effect. Although both the surfactant-like and telechelic polymers exhibit a similar scaling behavior for the brush thickness, a significant difference has been observed in terms of the brush microstructures, in particular, the segment densities near the edges of the polymer brushes.     

In situ spectroscopic ellipsometry of pH-responsive polymer brushes on gold substrates

The dynamic and reversible switching behaviour of polyelectrolyte brushes of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) toward changes of the pH value was studied by in situ VIS-spectroscopic ellipsometry (SE). For this, PDMAEMA brushes with three different molecular weights were synthesized via the “grafting from” method using surface initiated atom transfer radical polymerization. In detail, the applicability of different SE data modelling to describe the optical properties of the different brush layers in the swollen and collapsed state was investigated. Especially for the PDMAEMA brushes with a high molecular weight, an improved optical modelling of the experimental data could be achieved and revealed an exponential distribution of the PDMAEMA fraction in the brush layer.

Functionalization and patterning of reactive polymer brushes based on surface reversible addition and fragmentation chain transfer polymerization

We present the synthesis of reactive polymer brushes prepared by surface reversible addition–fragmentation chain transfer polymerization of pentafluorophenyl acrylate. The reactive ester moieties can be used to functionalize the polymer brush film with virtually any functionality by simple post‐polymerization modification with amines. Dithiobenzoic acid benzyl‐(4‐ethyltrimethoxylsilyl) ester was used as the surface chain transfer agent (S‐CTA) and the anchoring group onto the silicon substrates. Reactive polymer brushes with adjustable molecular weight, high grafting density, and conformal coverage through the grafting‐from approach were obtained. Subsequently, the reactive polymer brushes were converted with amino‐spiropyrans resulting in reversible light‐responsive polymer brush films. The wetting behavior could be altered by irradiation with ultraviolet (UV) or visible light. Furthermore, a patterned surface of polymer brushes was obtained using a lithography technique. UV irradiation of the S‐CTA‐modified substrates leads to a selective degradation of S‐CTA in the exposed areas and gives patterned activated polymer brushes after a subsequent RAFT polymerization step. Conversion of the patterned polymer brushes with 5‐((2‐aminoethyl)amino)naphthalene‐1‐sulfonic acid resulted in patterned fluorescent polymer brush films. The utilization of reactive polymer brushes offers an easy approach in the fabrication of highly functional brushes, even for functionalities whose introduction is limited by other strategies. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Selective Adsorption of Functionalized Nanoparticles to Patterned Polymer Brush Surfaces and Its Probing with an Optical Trap

The site‐specific attachment of nanoparticles is of interest for biomaterials or biosensor applications. Polymer brushes can be used to regulate this adsorption, so the conditions for selective adsorption of phosphonate‐functionalized nanoparticles onto micropatterned polymer brushes with different functional groups are optimized. By choosing the strong polyelectrolytes poly(3‐sulfopropyl methacrylate), poly(sulfobetaine methacrylate), and poly[2‐(methacryloyloxy)ethyl trimethylammonium chloride], it is possible to direct the adsorption of nanoparticles to specific regions of the patterned substrates. A pH‐dependent adsorption can be achieved by using the polycarboxylate brush poly(methacrylic acid) (PMAA) as substrate coating. On PMAA brushes, the nanoparticles switch from attachment to the brush regions to attachment to the grooves of a patterned substrate on changing the pH from 3 to 7. In this manner, patterned substrates are realized that assemble nanoparticles in pattern grooves, in polymer brush areas, or substrates that resist the deposition of the nanoparticles. The nanoparticle deposition can be directed in a pH‐dependent manner on a weak polyelectrolyte, or is solely charge‐dependent on strong polyelectrolytes. These results are correlated with surface potential measurements and show that an optical trap is a versatile method to directly probe interactions between nanoparticles and polymer brushes. A model for these interactions is proposed based on the optical trap measurements.     

Normal and frictional forces between surfaces bearing polyelectrolyte brushes

Normal and shear forces were measured as a function of surface separation, D, between hydrophobized mica surfaces bearing layers of a hydrophobic-polyelectrolytic diblock copolymer, poly(methyl methacrylate)- block-poly(sodium sulfonated glycidyl methacrylate) copolymer (PMMA- b-PSGMA). The copolymers were attached to each hydrophobized surface by their hydrophobic PMMA moieties with the nonadsorbing polyelectrolytic PSGMA tails extending into the aqueous medium to form a polyelectrolyte brush. Following overnight incubation in 10 (-4) w/v aqueous solution of the copolymer, the strong hydrophobic attraction between the hydrophobized mica surfaces across water was replaced by strongly repulsive normal forces between them. These were attributed to the osmotic repulsion arising from the confined counterions at long-range, together with steric repulsion between the compressed brush layers at shorter range. The corresponding shear forces on sliding the surfaces were extremely low and below our detection limit (+/-20-30 nN), even when compressed down to a volume fraction close to unity. On further compression, very weak shear forces (130 +/- 30 nN) were measured due to the increase in the effective viscous drag experienced by the compressed, sliding layers. At separations corresponding to pressures of a few atmospheres, the shearing motion led to abrupt removal of most of the chains out of the gap, and the surfaces jumped into adhesive contact. The extremely low frictional forces between the charged brushes (prior to their removal) is attributed to the exceptional resistance to mutual interpenetration displayed by the compressed, counterion-swollen brushes, together with the fluidity of the hydration layers surrounding the charged, rubbing polymer segments.     

Nanowear studies in reversibly switchable polystyrene-poly(acrylic acid) mixed brushes

Wear studies were performed on polystyrene (PS)-poly(acrylic acid) (PAA) mixed polymer brushes and corresponding monobrushes in a dried state. The aim was to study the wear mechanism in polymer brush surfaces as well as to investigate the effect of switching of PS + PAA binary brush surfaces (on treatment with the selective solvents for the PS and PAA) on the wear process. Wear experiments were carried out using atomic force microscopy (AFM) under a controlled environment. The wear experiments were performed as a function of scan number using a sharp silicon nitride tip to induce the wear on the sample surfaces. The wear mechanism on different brush surfaces was influenced by molecular entanglement as well as adhesion and friction on the sample surface. The wear process on the PS monobrush surface treated with toluene took place via formation of the ripples. On the other hand, a typical wear mode observed on the PAA monobrushes was removal of the polymeric material from the surface. For the mixed brush surface treated with toluene (selective solvent for PS) where PS chains dominated the top of the sample surface, the typical wear mode observed was ripple formation similar to that observed for the PS monobrushes. However, when a mixed brush was treated with ethanol and pH 10 water so that PAA chains dominated the top layer, wear occurred via removal of material. The amount of wear on the surfaces increased with the number of scans. Furthermore, the load and scan velocity dependence of the wear process was also investigated. Wear on polymer brush surfaces increased on increasing the load and/or decreasing the scan speed. The present study shows that wear can be controlled/tuned using mixed responsive brushes.     

Direct visualization of reversible switching of micropatterned polyelectrolyte brushes on gold surfaces using laser scanning confocal microscopy

We apply confocal fluorescence microscopy for real time studies of reversible conformational changes of poly(methacryloyloxyethyl phosphate) (PMEP) brushes chemically grafted onto gold substrates. Oregon green 488 fluorophores chemically attached onto the PMEP polymers were used as reporters for probing the conformational changes. Use of a specially designed liquid flow microchamber allowed dynamic imaging of the brushes under varying environmental conditions. The fluorescence intensities exhibited fully reversible brightness changes on alternation of the solution in the chamber between water and KCl. This reversible quenching behavior is consistent with a conformational change between an extended and a collapsed brush configuration. The fluorescence quenching behavior of the brushes was found to be dependent on ion concentration as well as polymer grafting density and was caused by nonradiative energy transfer to the polymer scaffold and the gold substrate.     

Reversible pH-controlled switching of poly(methacrylic acid) grafts for functional biointerfaces

Responsive polymeric brushes of poly(methacrylic acid) (PMAA) were grafted from silicon surfaces using controlled surface-initiated atom-transfer radical polymerization (SI-ATRP). The growth kinetics of PMAA was investigated with respect to the composition of the ATRP medium by grafting the polymer in mixtures of water and methanol with different ratios. The dissociation behavior of the polymer layers was characterized by FTIR titration after incubating the polymer-grafted substrates in PBS buffer solutions with different pH values. PMAA layers show a strong pH-dependent behavior with an effective pK(a) of the bulk polymer brush of 6.5 ± 0.2, which is independent of the polymer brush thickness and methanol content of the ATRP grafting medium. The pH-induced swelling and collapse of the grafted polymer layers were quantified in real time by in situ ellipsometry in liquid environment. Switching between polymer conformations at pH values of 4 and 8 is rapid and reversible, and it is characterized by swelling factors (maximum thickness/minimum thickness) that increase with decreasing the methanol content of the SI-ATRP medium.     

Complex polymer brush gradients based on nanolithography and surface-initiated polymerization

Confined surface gradients consisting of polymer brushes have great potential in various applications such as microfluidic devices, sensors, and biophysical research. Among the available fabrication approaches, nanolithographies combined with self-assembled monolayers and surface-initiated polymerization have became powerful tools to engineer confined gradients or predefined complex gradients on the nanometre size. In this tutorial review, we mainly highlight the research progress of the fabrication of confined polymer brush gradients by using electron beam, laser, and probe-based nanolithographies and the physical base for these approaches. The application of these polymer brush gradients in biomedical research is also addressed.     

Buried, covalently attached RGD peptide motifs in poly(methacrylic acid) brush layers: the effect of brush structure on cell adhesion

Iniferter-mediated surface-initiated photopolymerization was used to graft poly(methacrylic acid) (PMAA) brush layers obtained from surface-attached iniferters in self-assembled monolayers to a gold surface. The tethered chains were subsequently functionalized with the cell-adhesive arginine-glycine-aspartic acid (RGD) motif. The modified brushes were extended by reinitiating the polymerization to obtain an additional layer of PMAA, thereby burying the peptide-functionalized segments inside the brush structure. Contact angle measurements and Fourier transform infrared (FTIR) spectroscopy were employed to characterize the wettability and the chemical properties of these platforms. Time of flight secondary ion mass spectroscopy (TOF-SIMS) measurements were performed to monitor the chemical composition of the polymer layer as a function of the distance to the gold surface and obtain information concerning the depth of the RGD motifs inside the brush structure. The brush thickness was evaluated as a function of the polymerization (i.e., UV-irradiation) time with atomic force microscopy (AFM) and ellipsometry. Cell adhesion tests employing human osteoblasts were performed on substrates with the RGD peptides exposed at the surface as well as covered by a PMAA top brush layer. Immunofluorescence studies demonstrated a variation of the cell morphology as a function of the position of the peptide units along the grafted chains.     

Preparation and characterization of pure and mixed monolayers of poly(ethylene glycol) brushes chemically adsorbed to silica surfaces

We prepared pure and mixed monolayers of methoxy-terminated poly(ethylene glycol)s (m-PEG's) chemically attached to silica surfaces by using m-PEG silane coupling agents of three different molecular weights. These films were subsequently characterized in water by atomic force microscopy (AFM). Images of pure m-PEG monolayers showed the formation of polymer brushes on silica. Force curves between two modified surfaces suggested that an increase in the number of oxyethylene (OE) groups from 6 (PEG6 surface) to 43 (PEG43 surface) to 113 (PEG113 surface) decreased the flexibility of the m-PEG chains in the m-PEG brushes. Frictional force measurements also showed that the friction increased in the order PEG6 < PEG43 相似文献   

A theoretical investigation on the pH-induced switching of mixed polyelectrolyte brushes

A theoretical investigation on the pH-induced switching of mixed polyelectrolyte brushes was performed by using a molecular theory. The results indicate that the switching properties of mixed polyelectrolyte brushes are dependent on the pH values. At low pH, negatively charged chains adopt a compact conformation on the bottom of the brush while positively charged chains are highly stretched away from the surface. At high pH values, the inverse transformation takes place. The role of pH determining the polymer chains conformation and charge behavior of mixed polyelectrolyte brushes was analyzed. It is found that there exists a mechanism for reducing strong electrostatic repulsions： stretching of the chains. The H＋ and OH- units play a more important role as counterions of the charged polymers do. The collapse of the polyelectrolyte chains for different pH values could be attributed to the screening of the electrostatic interactions and the counterion-mediated attractive interaction along the chains.