Sources and toxicity of hexavalent chromium

Chromium exists in oxidation states ranging from ?IV to +VI, inclusively. The compounds exhibit a wide range of geometries including square planar, tetrahedral, octahedral, and various distorted geometries. Ore refining, chemical and refractory processing, cement-producing plants, automobile brake lining, catalytic converters for automobiles, leather tanneries, and chrome pigments contribute to the atmospheric burden of chromium. Hexavalent chromium is known to have 100-fold more toxicity than trivalent chromium, for both acute and chronic exposures because of its high water solubility and mobility, as well as easy reduction. The respiratory tract is the major target organ for hexavalent chromium following the inhalation exposure in humans. Chronic inhalation exposure to hexavalent chromium results in effects on the respiratory tract, with perforations and ulcerations of the septum, bronchitis, decreased pulmonary function, pneumonia, and nasal itching and soreness as reported. Chronic human exposure to high levels of hexavalent chromium by inhalation or oral exposure may produce effects on the liver, kidney, gastrointestinal, and immune systems, and possibly the blood. Dermal exposure to hexavalent chromium may cause contact dermatitis, sensitivity, and ulceration of the skin.     

New optical properties of polyelectrolyte hydrogels

A new optically active medium for lasers — a polyelectrolyte hydrogen swollen in a mixture of water + alcohol + dye — is presented. An anomalous dependence of the absorbance on the composition of the mixture is observed. It shows a maximum which corresponds to the composition when the hydrogel starts to swell as a hydrophilic network.     

Behavior of temperature-sensitive PNIPAM confined in polyelectrolyte capsules.

Layer-by-layer assembled polyelectrolyte microcapsules are of great interest because they can possibly be used as microcontainers and they show interesting stimuli-responsive properties, which have been recently investigated. Here, we exploit capsules which are made temperature-sensitive by encapsulating poly(N-isopropylacrylamide) (PNIPAM). PNIPAM has a cloud point in water at about 32 degrees C, above which it collapses and is insoluble in water. Further this temperature responsiveness can be tuned by addition of various ions at various concentrations. Here, we present the encapsulation of PNIPAM inside polyelectrolyte microcapsules, and describe the dependence of the lower critical solution temperature (LCST) on the nature and the amount of different salts added. With this information, we demonstrate the ability to tune and finely control the collapse of encapsulated PNIPAM. In this light, this system could be used as a microsensor or drug- delivery system.     

Quantification of total chromium and hexavalent chromium in UHT milk by ETAAS

Procedures for the quantification of total chromium and hexavalent chromium in UHT milk samples are presented. Total chromium was determined directly in milk with the addition of a surfactant and a mixture of Pd and Mg as a chemical modifier. For the selective separation of hexavalent chromium, the sample pre-treatment consisted in precipitation of proteins and elution of the supernatant through a Chromabond NH2 column. The metal was eluted with nitric acid. Both total chromium and hexavalent chromium were evaluated by atomic absorption spectrometry with electrothermal atomization using the same instrumental conditions. The detection limits were 0.2 and 0.15 microgram l-1 for total chromium and hexavalent chromium, respectively. The linearity ranges under the optimized conditions were 0.2-20 and 0.15-50 micrograms l-1. For total chromium the precision was 4.9 and 5.7% for the analytical and the over-all procedure, respectively, and for hexavalent chromium 4.3 and 4.9%, respectively. The validation of both procedures was performed by the standard additions method and the recoveries were higher than 93% in all cases. For total chromium, a certified reference material was also used to validate the methodology. The methods were applied to the determination of total chromium and hexavalent chromium in 60 UHT milk samples.     

Determination of trace concentrations of hexavalent chromium

A simple and sensitive solvent extraction-atomic spectrometric technique has been developed for the determination of hexavalent chromium in fresh and saline waters. The technique is based on the reaction of chromium with diphenylcarbazide. The method has been tested on a variety of water samples over an analytical range of 0-2 microg l(-1). A limit of detection of 0.024 microg l(-1) was achieved. Spiking recoveries in the range 87-115% were achieved in river water, drinking water and marine waters.     

Thermal lens spectrometric determination of hexavalent chromium

The applicability of thermal lens spectrometry (TLS) for quantification and routine determination of hexavalent chromium was investigated by using a collinear dual beam thermal lens spectrometer. In aqueous solutions the LOD of 0.1 μg l⁻¹ was obtained for Cr(VI) by using 160 mW laser power. The performance of the technique was verified by the determination of hexavalent chromium in standard reference water samples (NIST SRM 1643a and NIST SRM 1643c) and comparing the results for Cr(VI) in CCA (Cr, Cu, As)-treated timber extracts to concentrations obtained by atomic absorption spectrometry (AAS). Good agreement between the TLS results and reported values for Cr(VI) in SRMs as well as AAS results for Cr(VI) in CCA-treated timbers confirmed that TLS is a reliable and accurate analytical technique applicable for the determination of Cr(VI) in aqueous solutions at concentration levels 0.5–100 μg l⁻¹.     

Quaternized wood as sorbent for hexavalent chromium

The potential of quaternized wood (QW) chips in removing hexavalent chromium from synthetic solution and chrome waste under both batch and continuous-flow conditions was investigated. Sorption was found to be dependent on pH, metal concentration, and temperature. QW chips provide higher sorption capacity and wider pH range compared with untreated wood chips. The equilibrium data could be fitted into the Langmuir isotherm model, and maximum sorption capacities were calculated to be 27.03 and 25.77 mg/g in synthetic chromate solution and chrome waste, respectively. The presence of sulfate in high concentration appeared to suppress the uptake of chromium by QW chips. Column studies showed that bed depth influenced the breakthrough time greatly whereas flow rate of influent had little effect on its sorption on the column.     

Extraction and determination of hexavalent chromium in soil samples

A procedure for the extraction of Cr(VI) from solid soil-like samples was presented in which the complexing properties of diethylenetriaminepentaacetic acid (DTPA) were exploited to extract insoluble compounds of Cr(VI). A concentration of DTPA in an ammonium sulphate/ammonium hydroxide buffer equal to 0.02 mol l⁻¹ was chosen. The conditions of extraction of insoluble Cr(VI) from solid samples were optimised using soil certified reference material spiked with known concentration of insoluble Cr(VI) added as PbCrO₄. The extracts were analysed by adsorptive stripping voltammetry. Validation of the proposed procedure of extraction was carried out by analysis of certified reference material (CRM) 545 and comparison of the results obtained using the proposed and other methods of extraction in the course of analysis of natural soil samples.     

Swelling behaviors of polyelectrolyte hydrogels containing sulfonate groups

Series of maleate monoester and diester monomers based on poly(ethylene glycol) monomethyl ether (MPEG) were copolymerized using the ionizable 2‐acrylamido‐2–methyl propane sulfonic acid (AMPS) via different dose rate of electron‐beam irradiation (40–150 kGy). The crosslinking of the copolymers were carried out in aqueous acidic solutions at pH 1 or in the presence of 1% N,N‐methylene bisacrylamide (MBA) as crosslinking agent. The final equilibrium water content and swelling capacities for the prepared hydrogels were determined in aqueous solutions at pH 1, 6.8, and 12 and in aqueous salt solutions at 298 K. Swelling equilibria for prepared hydrogels were determined in different molar salt solutions of NaCl, KCl, CaCl₂, Na₂SO₄, K₂SO₄, and CaSO₄. The swelling ratios of gels in pure water and in the salt solutions were found to depend on the counterion species in the increasing sequence of Ca²⁺, Na⁺ and K⁺. Copyright © 2002 John Wiley & Sons, Ltd.     

Reswelling of polyelectrolyte hydrogels by oppositely charged surfactants

The interactions between charged alkylacrylamide gels of varying hydrophobicity and charge density and the oppositely charged surfactant hexadecyltrimethylammonium (C16TA+) have been investigated to determine the conditions necessary to induce excess surfactant binding (beyond charge neutralization) and resolubilization of the polymer-surfactant complex. In all cases, an initial gel collapse occurred due to neutralization of the charges in the gel, and the volume of the collapsed gel was smaller than that of the corresponding neutral gel at the same surfactant concentration, as a result of the formation of interchain micellar cross-links. For gels containing neutral repeating units that were found previously to bind C16TA+, a subsequent sharp reswelling of the gel network occurred, beginning at a critical surfactant concentration called the cac(2). The reswelling is due to binding of excess surfactant, which results in the gels becoming recharged. For gels whose neutral repeating units do not bind C16TA+, there was no reswelling behavior (no cac(2)), but there was a gradual increase of the swelling back to that of the equivalent neutral gel with increasing surfactant concentration. The results are interpreted in terms of the expected surfactant binding isotherm.     

Surface friction of hydrogels with well-defined polyelectrolyte brushes

Hydrogels of poly(2-hydroxyethyl methacrylate) (PHEMA) with well-defined polyelectrolyte brushes of poly(sodium 4-styrenesulfonate) (PNaSS) of various molecular weights were synthesized, keeping the distance between the polymer brushes constant at ca. 20 nm. The effect of polyelectrolyte brush length on the sliding friction against a glass plate, an electrorepulsive solid substrate, was investigated in water in a velocity range of 7.5 x 10(-5) to 7.5 x 10(-2) m/s. It is found that the presence of polymer brush can dramatically reduce the friction when the polymer brushes are short. With an increase in the length of the polymer brush, this drag reduction effect only works at a low sliding velocity, and the gel with long polymer brushes even shows a higher friction than that of a normal network gel at a high sliding velocity. The strong polymer length and sliding velocity dependence indicate a dynamic mechanism of the polymer brush effect.     

Surfactant-promoted enhancement in bioremediation of hexavalent chromium to trivalent chromium by naturally occurring wall algae

Research on Chemical Intermediates - The discharge of hexavalent chromium [Cr(VI)] has resulted in significant pollution because of the presence of Cr(VI) oxyanions. They are highly water-soluble,...     

快速溶剂萃取-离子色谱法同时测定塑料中的三价铬和六价铬

建立了采用快速溶剂萃取-离子色谱同时测定塑料中三价铬和六价铬的方法。三价铬和六价铬分别以吡啶-2,6-二羧酸(PDCA)和1,5-二苯卡巴肼(DPC)作为络合剂在柱前和柱后进行衍生化,分别在紫外和可见波长下采用紫外检测器进行检测,灵敏度高,基体干扰小。本方法对三价铬和六价铬的检出限分别为5.0 μg/L和0.5 μg/L;分别在50～1000 μg/L和5.0～100 μg/L范围内呈现良好的线性关系,线性相关系数分别为0.9994和0.9998;三价铬和六价铬的回收率范围为90.7%～101.1%,相对标准偏差(RSD)为1.7%～4.4%。该方法分析速度快、灵敏度高、重现性好,可用于塑料中三价铬和六价铬的同时测定。     

Fast synthesis of temperature-sensitive PNIPAAm hydrogels by microwave irradiation

A novel method, microwave irradiation synthesis, is proposed for the preparation of thermo-sensitive poly(N-isopropylacrylamide) (PNIPAAm) hydrogels. The PNIPAAm hydrogels were separately synthesized by using microwave irradiation method and water-bath heating method. Chemical groups, lower critical solution temperature (LCST) and surface morphology of these PNIPAAm hydrogels were characterized by FT-IR, DSC and SEM. Swelling ratios of the gels were measured gravimetrically in the temperature range from 10.0 to 60.0 °C. Results showed that (1) the use of microwave irradiation can greatly shorten the reaction time required for PNIPAAm hydrogel synthesis from several hours to several minutes in comparison with water-bath heating method, and obviously improve the yields of the PNIPAAm gels, which were up to 99% after a short reaction time; (2) SEM micrographs and textural measurement revealed that the gels synthesized using microwave irradiation had more porous structure, and their average pore sizes and specific surface areas were larger than those of the gels synthesized using water-bath heating method; and (3) the PNIPAAm hydrogels synthesized using microwave irradiation had much higher swelling ratios at 10.0 °C below the LCST, and had lower swelling ratio at 60.0 °C above the LCST compared to the hydrogels synthesized by water-bath method.     

Determination of dissolved hexavalent chromium in river water, sea water and waste water

Summary A simple and reliable method for the determination of dissolved hexavalent chromium in aquatic systems is described. Chromium(VI) is quantitatively coprecipitated with lead sulfate from weakly acidic (pH 3.5) sample solutions. It is determined by graphite furnace atomic absorption spectroscopy at 357.9 nm. The detection limit of the method is 0.3 g/l at a 95% confidence level. Relatively high concentrations of chromium(III) do not interfere in the determination of hexavalent chromium. High chloride (> 6 g/l) or sulfate (> 800 mg/l) concentrations cause a significant decrease in the Cr(VI) recoveries. These interferences are mutually influenced.The sulfate interference is reduced, but not eliminated in the presence of high chloride concentrations, while chloride interferences are eliminated in the presence of a sufficient sulfate concentration in the original sample. Chromium(VI) is recovered quantitatively from river water and effluent samples, but its recovery from sea water is incomplete (83%), due to interferences by sulfate during the coprecipitation procedure.

---

Bestimmung von gelöstem Chrom(VI) in Fluß-, Meer- und Abwasser

Zusammenfassung Eine einfache und zuverlässige Methode zur Chrom(VI)-bestimmung in wäßrigen Systemen wurde ausgearbeitet. Dabei wird Chrom(VI) aus schwach saurer Lösung (pH 3,5) mit Bleisulfat mitgefällt und mit Hilfe der Graphitofen-AAS bei 357,9 nm bestimmt. Die Nachweisgrenze liegt bei 0,3 g/l bei 95% Vertrauensbereich. Relativ hohe Konzentrationen an Chrom(III) stören nicht. Hohe Gehalte an Chlorid (> 6 g/l) oder Sulfat (> 800 mg/l) können zu beträchtlichen Minderbefunden an Cr(VI) führen. Diese Störungen beeinflussen sich gegenseitig. So wird die Störung durch Sulfat in Gegenwart großer Chloridmengen herabgesetzt, aber nicht ganz eliminiert, während die Chloridstörung durch genügend Sulfat beseitigt wird. Chrom(VI) konnte aus Fluß- und Abwasser quantitativ wiedergefunden werden, aus Meerwasser nur zu 83% (wegen der Störung durch Sulfat bei der Mitfällung).

     

Removal of hexavalent chromium from wastewaters by bone charcoal

The adsorption of hexavalent chromium onto bone charcoal was studied as a function of time, amount of charcoal, pH, concentration of chromium and sample volume. The cross interference with other elements was also investigated. Tests were carried out with solutions of chromium(VI) at concentrations between 5 and 25 mg · L^–1. Chromium removal efficiencies higher than 90% were achieved at pH = 1 using 2 g of bone charcoal and a stirring time in the order of 30 min. Acid and alkaline pretreatments of bone charcoal did not improve the sorption capacity of bone charcoal against Cr(VI). The presence of other ions had practically no influence on the chromium removal. The presence of a matrix of tannery effluents did not reduce the removal capacity of bone charcoal for Cr(VI), but it was confirmed that only 47% of Cr(III) can be removed using these conditions. Received: 20 July 1998 / Revised: 4 October 1998 / Accepted: 10 October 1998     

Quantitative determination of hexavalent chromium in aqueous solutions by UV-Vis spectrophotometer

In the last decade, different methods have been developed for the determination of chromium(VI) concentration in water. These methods use high cost equipment or they require a long preparation time. Because of their drawbacks, this paper describes an on-line, rapid and sensitive procedure for the determination of Cr(VI) concentrations in aqueous solutions via pH and absorption measurements. Only four Cr(VI) species are considered. The effects of pH and of total amount of chromium on the Cr(VI) speciation are investigated. The molar absorptivities of four chromium species at 371 nm are determined by minimising an objective function. The knowledge of these molar absorptivities and the measurements of pH and absorption at 371 nm lead to a rapid determination of total Cr(VI) concentration. The reliability and applicability of the method were confirmed using synthetic water samples.      

流动注射分光光度法快速测定水样中的铬

建立了用流动注射分光光度法快速检测水样中铬含量的方法.测定耗时140 s,测定频率25样/h.本法利用Cr(Ⅵ)和二苯碳酰二肼显色反应,Cr(Ⅵ)标准溶液的质量浓度在0.05～0.8 mm/L之间与吸光度呈线性.该法的检出限是4.0 μg/L,低于国家对Ⅰ类水的相关标准.应用此法分别测定了北京城区一些地表水中铬的含量,加标回收率在90.1%～113%之间.