“Clickable” polymers via a combination of RAFT polymerization and isocyanate chemistry

We describe a facile, one‐pot, two‐step polymerization towards synthesizing block co‐polymers bearing reactive isocyanate functional groups. Reversible addition fragmentation chain transfer (RAFT) polymerization is used to mediate the co‐polymerization of isocyanate‐bearing monomers dimethyl meta‐isopropenyl benzyl isocyanate (TMI) and 2‐isocyanatoethyl methacrylate (ICEMA) with styrene and methyl methacrylate (MMA), respectively. ICEMA was incorporated into the polymer at a faster rate than TMI and its unhindered isocyanate group was found to be more reactive than the hindered isocyanate group of TMI. Both the TMI/styrene and the MMA/ICEMA systems maintain the reactivity of the isocyanate functionality, which was exploited by attaching representative hydroxyl‐bearing small and large molecules as well as solid substrates to the block co‐polymers. Thus, we demonstrate the versatility of the block co‐polymer system as a basis for forming branched polymers or as grafts for a solid substrate. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

由平面合成聚合物刷--表面引发原子转移自由基聚合研究进展

原子转移自由基聚合反应(ATRP)是实现活性聚合,获得可控聚合物的一种有效途径。通过表面引发原子转移自由基聚合,在材料表面合成聚合物刷,是改变材料表面特征的有效方法。本文综述了表面引发原子转移自由基聚合合成聚合物刷及其最新进展。     

Hydroxyl Functionalized Uniform‐Porous Beads,Synthesis and Chromatographic Use

Uniform‐porous poly(dihydroxypropyl methacrylate‐co‐ethylene dimethacrylate), poly(DHPM‐co‐EDM) particles were synthesized as an alternative packing material for reversed phase chromatography. In the synthesis, poly(glycidyl methacrylate‐ethylene dimethacrylate), poly(GMA‐co‐EDM) particles were obtained by a multi‐stage swelling and polymerization protocol, the so called “modified seeded polymerization”. For this purpose, 2.4 µm polystyrene seed particles were first swollen by dibutyl phthalate (DBP) and then by a monomer mixture including glycidyl methacrylate and ethylene dimethacrylate. The repolymerization of monomer phase in the swollen seed particles provided porous uniform particles approximately 7 µm in size. Poly(DHPM‐co‐EDM) particles were obtained by the acid hydrolysis of the particles synthesized with different GMA feed concentrations. These particles were used as column‐packing material in the reversed phase separation of alkylbenzenes. The retention factor‐acetonitrile concentration diagrams clearly showed that the polarity of packing material could be controlled by changing the GMA feed concentration in the “modified seeded polymerization”. The packing materials with more hydrophobic character (i.e., poly(EDM) and poly(DHPM‐co‐EDM) particles produced with the GMA feed concentrations up to 20%) exhibited better chromatographic performance in the reversed phase mode.     

由可控聚合反应直接制备不同形貌的聚集体

由可控聚合,包括活性阴离子和自由基聚合直接制备不同形貌纳米材料,是近几年来合成化学领域的一个重要研究成果.与两亲性嵌段共聚物在选择性溶剂中自组装方法不同,在选择性溶剂中进行的分散聚合,首先生成两亲性嵌段共聚物,并逐渐增加第二段聚合物的链长,以实现相分离,形成球形胶束;聚合物链继续增长,实现形貌转变,从而制备预期的聚合物形貌,包括球形胶束、纳米棒、纳米线、囊泡和复合囊泡等.本文综述了乳液聚合法制备球形胶束等形貌;描述了不同聚合体系形成的形貌以及它们的性质和应用,讨论了形貌的形成机理和控制方法,同时指出了存在的问题.     

Statistical derivation of kinetic molecular weight development equations in nonlinear free-radical polymerization

We propose a statistical method to derive the differential equations that describe the weight-average molecular weight development during nonlinear free-radical polymerizations, by using the random sampling technique. We consider two types of nonlinear free-radical polymerization schemes, free-radical polymerization with chain transfer to polymer and free-radical crosslinking (co)polymerization. The obtained equations fully agree with those obtained through the kinetic approach using the method of moments. The physical meaning of each term in the differential equations as well as the implication of the functional form is discussed from the point of view of the statistical derivation.     

Preparation of Thermochromic Films from Latexes Made by Miniemulsion Polymerization

Thermosensitive‐thermochromic pigments are classified as smart materials capable of detecting and/or responding to environmental stimuli, and specifically in this study, changes in temperature that induce a change in the color of the material. This study aims to obtain nanoparticles of poly(styrene‐co‐butyl acrylate) and poly(styrene‐co‐methyl methacrylate), containing thermosensitive‐thermochromic pigments that are incorporated into the monomer droplets in miniemulsion polymerization. Miniemulsion polymerization has the advantage that the pigment particles can be dispersed directly in the monomer droplets and are encapsulated when the miniemulsion droplets are polymerized. Using controlled/living radical polymerization (or Reversible Deactivation Radical Polymerization), it is possible to produce polymers with better control of microstructure and narrower molecular weight distributions. Nitroxide‐mediated polymerization (NMP) is conducted using the BlocBuilder initiator, as well as a conventional free radical polymerization (FRP) using potassium persulfate (KPS) and 2,2‐azobis(2‐methylpropionitrile) (AIBN). Stable latexes containing the thermosensitive‐thermochromic pigments are obtained by both NMP and FRP. Films are made from the latexes and shown to exhibit thermochromic behavior.     

Polymerizations Mediated by Well‐Defined Rhodium Complexes

This Minireview details the current state‐of‐the‐art relating to (co)polymerizations mediated by well‐defined Rh^I‐ethynyl, vinyl, and aryl complexes. In particular, we focus on Rh^I species suitable for the (co)polymerization of phenylacetylenes, arylisocyanides, as well as propargyl esters and amides.     

Silica‐Supported Pentamethylcyclopentadienyl Ytterbium(II) and Samarium(II) Sites: Ultrahigh Molecular Weight Polyethylene without Co‐Catalyst

Designing highly active supported ethylene polymerization catalysts that do not require a co‐catalyst to generate electrophilic metal alkyl species is still a challenge despite its industrial relevance. Described herein is the synthesis and characterization of well‐defined silica‐supported cyclopentadienyl Ln^II sites (Ln=Yb and Sm) of general formula [(≡SiO)LnCp*]. These well‐defined surface species are highly activite towards ethylene polymerization in the absence of added co‐catalyst. Initiation is proposed to occur by single electron transfer.     

Nanocomposite structures of polypyrrole derivatives and poly (acrylonitrile‐co‐itaconic acid) produced by in situ polymerization as carbon nanofiber precursor

This study aimed to produce nanoparticles of poly (acrylonitrile‐co‐itaconic acid) (P (AN‐co‐IA)) containing conjugated polymers of pyrrole, N‐Methylpyrrole, 2,5‐dimethylpyrrole, and 1‐(Triisopropylsilyl)pyrrole which were synthesized by emulsion polymerization. Nanocomposite structures of P (AN‐co‐IA)/polypyrrole and polymer of pyrrole derivatives were produced via in situ polymerization, and the nanoparticle formation were followed by morphologic and ultraviolet‐visible (UV‐Vis) spectroscopic methods. Characterizations were made by Fourier transform infrared‐attenuated total reflectance (FTIR‐ATR) and Raman spectroscopy. Atomic force microscopy (AFM) was used for investigating the surface characteristics of the nanoparticles. Characterization results revealed that nanoparticles containing conjugated polymers had rougher surface than P (AN‐co‐IA) nanoparticles. It was also observed that the nanoparticles were well‐distributed although having some agglomerates. Moreover, depending on the type of monomer of conjugated polymer, the shape and size of the produced nanoparticles differed by conjunction with their polymerization rate. These findings can be used as a startup information for production of carbon nanofibers (CNFs) with desired properties after oxidation and carbonization, and as a high‐performance and cost‐effective flame and heat‐resistant material (oxidized copolymers of polyacrylonitrile nanofiber).     

高分子量的枝状聚硅烷的合成与表征

根据硅氢加成反应机理设计了“顺点滴式”工艺 ,高效、低耗地合成了甲基苯乙基二氯硅烷和甲基正己基二氯硅烷 .根据Wurtz还原偶联反应原理 ,采用“预聚”和“混聚”两种工艺分别合成枝状共聚硅烷 ,发现运用“预聚”工艺可以合成分子量很高的枝状聚硅烷 .     

Macromolecular engineering by controlled/living ionic and radical polymerizations

Various methods for the synthesis of well‐defined (co)polymers with controlled dimension, polydispersity, topology, composition and functionality are discussed. They include controlled/living vinyl polymerization using anionic, cationic and radical intermediates being in equilibria with dormant species. Special emphasis is placed on the radical polymerization and on the needs for the comprehensive structure property correlation.     

Lactide polymerization co‐initiated by carbohydrate esters and pyranoses

The polymerization of [S]‐lactide was accomplished using an initiating system comprising an alkyl zinc complex and a series of well defined carbohydrate co‐initiators derived from D ‐glucose, D ‐xylose, and 2‐deoxy‐D ‐ribose. The monosaccharide co‐initiators were aldonate esters and pyranoses, they were all prepared in high yield and had only a single alcohol co‐initiating group; the remaining carbohydrate hydroxyl functionalities were protected as acetyl, benzyl ether and isopropylidene acetal groups. The polymerizations were all well controlled, illustrated by the linear increase in poly(S‐lactide) M_n with percentage conversion of lactide, the increase in poly(S‐lactide) M_n with [lactide]₀‐[lactide]_t/[co‐initiator] and the narrow polydispersity indices of the polylactides. Thus, the novel initiating systems were used to produce poly(S‐lactides) end functionalized with a variety of different aldonate ester and pyranose groups and with degrees of polymerization from 10 to 250. The polyesters were fully characterized, including by NMR spectroscopy, size exclusion chromatography (SEC), matrix‐assisted laser deposorption/ionization (MALDI) mass spectrometry and by static water contact angle measurements. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4350–4362, 2008     

以聚苯乙烯为把的聚四氢呋喃(PTHF)梳型聚合物的制备

高分子的自组装已成为当今高分子科学的热门研究课题之一[1] .开展该研究工作 ,首先要获得特定结构的聚合物 .我们设计合成如图 1所示的梳型聚合物 ,调节制备Ａ ,Ｂ ,Ｃ三链段所用的单体和它们的聚合度等参数 ,并进一步进行自组装研究 .若Ａ段是结晶聚合物 ,且熔融温度低于Ｃ段的玻璃化转变温度 ,则在定型储能材料等方面具有应用前景 .合成梳型嵌段聚合物有三个方法 ,即发散 (Ｇｒａｆｔｆｒｏｍ) ,收敛 (Ｇｒａｆｔｔｏ)和大分子方法 .采用大分子技术 ,每个梳型链长及支化密度可控 ,一直是人们青睐的方法[2 ] .一般采用与普通烯类单体共聚…     

Synthesis of well‐defined comb‐like graft (co)polymers by nucleophilic substitution reaction between living polymers and polyhalohydrocarbon

A series of graft (co)polymers were synthesized by nucleophilic substitution reaction between iodinated 1,2‐polybutadiene (PB‐I, backbone) and living polymer lithium (side chains). The coupling reaction between PB‐I and living polymers can finish within minutes at room temperature, and high conversion (up to 92%) could be obtained by effectively avoiding side reaction of dimerization when living polymers were capped with 1,1‐diphenylethylene. By virtue of living anionic polymerization, backbone length, side chain length, and side chain composition, as well as graft density, were well controlled. Tunable molecular weight of graft (co)polymers with narrow molecular weight distribution can be obtained by changing either the lengths of side chain and backbone, or the graft density. Graft copolymers could also be synthesized with side chains of multicomponent polymers, such as block polymer (polystyrene‐b‐polybutadiene) and even mixed polymers (polystyrene and polybutadiene) as hetero chains. Thus, based on living anionic polymerization, this work provides a facile way for modular synthesis of graft (co)polymers via nucleophilic substitution reaction between living polymers and polyhalohydrocarbon (PB‐I). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

乳液共聚反应过程与聚合物结构关系及~（13）C－NMR对聚合物结构的表征

用间歇法和半连续法进行了丙烯酸丁酯（ＢｕＡ）与醋酸乙烯酯（ＶＡｃ）乳液共聚合．１３Ｃ－ＮＭＲ对共聚产物分子结构测试表明，在间歇法共聚合中随着反应进行其组成及结构发生很大变化，而半连续法确能制得成份及结构均匀一致的Ｐ（ＢｕＡ－ＶＡｃ）共聚物．由于ＢｕＡ水溶性小于ＶＡｃ，而其竟聚率远大于ＶＡｃ，间歇法共聚合反应初期只有少量ＶＡｃ参加共聚合．通过对间歇法共聚合中不同反应时间聚合物的１３Ｃ－ＮＭＲ测试，表明反应初期聚合的ＶＡｃ以单链节或二元序列形式存在于主要由ＢｕＡ单元构成的分子链中，而并未形成较长ＶＡｃ链段．对上述试样玻璃化转变温度的测试结果与１３Ｃ－ＮＭＲ实验结果颇为一致．     

Synthesis of Poly(IB‐co‐VBDC)‐g‐PMMA via Photo‐initiated Free Radical Graft Polymerization

Abstract

Photoinitiated free radical graft polymerization of methyl methacrylate (MMA) with poly[isobutene‐co‐(4‐vinyl benzyl N,N‐diethyldithiocarbamate)] [poly(IB‐co‐VBDC)] as macromolecular iniferter was investigated. The polymerization proceeds to give a high yield graft copolymer, however it was observed that even in the early stage of the polymerization there formed an insoluble polymer. In the presence of tetraethylthiuram disulfide (TETD) the gel fraction of the yield graft copolymer was drastically reduced and the polymerization was retarded as well. When the [TETD]/[VBDC] increased from 0 to 1.0, the gel fraction of the graft copolymer decreased from 33.2% to 1.6% (wt) while the fraction of the homopolymer of the MMA increased from 4.5% to 10.5% (wt). With the increasing of the UV irradiation time, both the MMA conversion and the molecular weight of the graft copolymer increased readily.     

Polymers with macrocyclic architectures: Synthesis and properties

The preparation by living polymerization and the investigation of the properties of polymers with cyclic chain architectures have been recently undertaken. The cyclization involves a unimolecular end-to-end reaction of a heterodifunctional linear precursor. The elementary steps of the cyclization mechanism are examined in the light of matrix-assisted laser desorption/ ionization mass spectrometry (MALDI-MS) data obtained on linear polystyrene precursors and cyclized products. The synthetic procedures developed to prepare macrocyclic polymers of various structures, as well as macrocyclic random and block copolymers are then reviewed and discussed. The main characteristics of the cyclic (co)polymers are compared to the corresponding linear chains and some of the original properties that are induced by the cyclic chain architecture are presented.     

Copolymerization of Metal Nanoparticles: A Route to Colloidal Plasmonic Copolymers

The resemblance between colloidal and molecular polymerization reactions is very useful in fundamental studies of polymerization reactions, as well as in the development of new nanoscale systems with desired properties. Future applications of colloidal polymers will require nanoparticle ensembles with a high degree of complexity that can be realized by hetero‐assembly of NPs with different dimensions, shapes, and compositions. A method has been developed to apply strategies from molecular copolymerization to the co‐assembly of gold nanorods with different dimensions into random and block copolymer structures (plasmonic copolymers). The approach was extended to the co‐assembly of random copolymers of gold and palladium nanorods. A kinetic model validated and further expanded the kinetic theories developed for molecular copolymerization reactions.     

Preparation of poly(vinylphenylboronic acid) chain grafted poly(glycidylmethacrylate‐co‐ethylenedimethacrylate) beads for the selective enrichment of glycoprotein

Surface‐initiated atom transfer radical polymerization was successfully used to prepare 4‐vinylphenylboronic acid functionalized poly(glycidylmethacrylate‐co‐ethylenedimethacrylate) beads for the selective enrichment of glycoprotein from complex biological samples in this study. The modified bead surfaces were characterized using Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy. The sorption behaviors, including adsorption isotherms, incubation time, and pH effect, were investigated. The results demonstrated that the boronated beads have a high affinity for glycoprotein, which is due to the well‐defined boronic acid brushes on the beads surfaces. Furthermore, the polyvinylphenylboronic acid grafted poly(glycidylmethacrylate‐co‐ethylenedimethacrylate) beads were used to efficiently enrich and purify glycoprotein from real egg white samples and α‐fetoprotein from human serum samples. The mass spectrometry results demonstrated that the polyvinylphenylboronic acid grafted poly(glycidylmethacrylate‐co‐ethylenedimethacrylate) beads are a suitable material for the enrichment of glycosylated protein from complex biological samples.