Beta zeolite colloidal nanocrystals supported on mesoporous MCM-41

Zeolite-based composite materials prepared by the embedding of the beta zeolite nanophase from aqueous colloidal solution into matrices of preformed Si(Al)MCM-41 mesoporous molecular sieves have been characterized by different methods (XRD, SEM, FTIR, N2 adsorption, and TPD of NH3). Their potential as catalysts for toluene disproportionation has been compared to mechanical mixtures of freeze-dried nanobeta crystallites with Si(Al)MCM-41 mesoporous materials. It is found that the zeolite catalyst efficiency is not substantially changed by the presence of mesopores belonging to the matrix. It is suggested that formation of intergrown aggregates from the colloidal nanobeta particles provides own highly developed textural mesoporosity that makes the contribution of the diffusional alleviation of the support negligible.     

Beta zeolite supported on silicon carbide for Friedel-Crafts fixed-bed reactions

Beta zeolite supported on silicon carbide, with high thermal conductivity and high mechanical strength, was successfully used as an active and stable catalyst for Friedel-Crafts reactions in a fixed bed configuration.     

含超微氧化亚钴颗粒Beta分子筛的合成及其催化乙苯氧化性能

杂原子分子筛是指在硅铝分子筛或磷铝酸盐分子筛中含有骨架内或骨架外某种原子或其化合物的分子筛.这些杂原子可以是某些主族元素(如硼、锗、镓)或有变价特性的过渡金属元素(如钛、铁、钴、镍)等.将杂原子或其化合物通过浸渍、离子交换、水热晶化等方式引入沸石分子筛骨架中形成杂原子分子筛,往往可以改变沸石分子筛的骨架结构和理化性能,并赋予沸石分子筛新的催化反应性能.自1983年钛硅分子筛TS-1被发现能够高效催化烯烃环氧化以来,许多杂原子分子筛因其在催化烷烃类及芳烃类氧化、醛酮选择氧化及烯烃类环氧化等领域表现出的优良性能得到了广泛关注.目前,合成含不同杂原子的分子筛已成为分子筛材料开发的一个重要内容.分子筛的微孔孔道结构赋予了被引入其中作为催化中心的杂原子对反应物/产物分子独特的择形选择性;同时,分子筛骨架与杂原子之间往往存在化学键或空间限域作用,使得杂原子在高温高压等反应条件下依然保持高度的分散性,避免由于团聚导致活性降低.钴离子及含钴化合物在烷烃及芳烃类催化氧化反应中表现出很好的活性,能够利用分子氧实现对高碳烷烃及烷基苯的催化氧化.将钴离子及其化合物引入具有合适孔道结构的分子筛,可以提高催化反应的选择性.目前将对含钴分子筛的合成研究主要有后处理法及直接水热法.后处理法包括负载法及离子交换法,用于制备含有钴物种的硅铝分子筛;而直接水热法主要用于制备含有骨架钴的磷酸铝分子筛.目前为止,使用水热法合成含钴的分子筛材料的合成及其催化应用至今鲜有研究报导.这主要是由于传统的分子筛合成体系的高碱性环境会导致钴盐的沉淀,导致其无法被引入分子筛.我们通过优化合成条件,利用含氟体系直接水热法将钴引入Beta分子筛,得到含超微氧化亚钴团簇的Beta沸石分子筛.通过扫描电子显微镜、X射线粉末衍射、紫外-可见漫反射光谱、X射线光电子能谱、透射电子显微镜及H2程序升温还原等表征手段对合成样品的物理化学性质进行了研究,并与使用浸渍、离子交换得到的含钴Beta沸石及水热合成得到的含钴AlPO-5分子筛的相关性质进行了对比.合成得到的含钴分子筛材料中,钴物种以亚纳米尺度的氧化亚钴颗粒形式存在.我们使用分子氧作为氧源,考察了该含超微氧化亚钴的Beta沸石作为催化剂催化乙苯氧化反应的活性.与浸渍、离子交换制得钴硅分子筛及含有骨架钴的磷酸铝分子筛材料相比,含超微氧化亚钴的Beta分子筛表现出更高的催化活性及对苯乙酮/醛的选择性.     

Effect of thermal treatment conditions on the acid properties of zeolite Beta

The acid properties of zeolite Beta were studied by IR spectroscopy with the use of adsorbed NH₃ and CO probe molecules. It was found that the strength of the Brønsted acid sites (BASs) of zeolite Beta was the same as that of zeolite ZSM-5. Approximately a third of the total amount of BASs participated in the formation of hydrogen bonds at interdomain boundaries; thus, they were inaccessible to molecules larger than the ammonia molecule. The qualitative and quantitative compositions of acid sites in zeolite Beta can be regulated by changing the conditions of calcination of the initial zeolite form (temperature and/or gas atmosphere). Calcination under vacuum conditions afforded the highest acidity of the zeolite with respect to all types of acid sites. Calcination in a flow of air resulted in the lowest acidity of the sample, especially, with respect to the concentration of strong Lewis acid sites, because of the formation of an alumina phase. Calcination in an atmosphere of helium resulted in a decrease (as compared with a vacuum) in the rate of removal of the organic template decomposition products of the initial zeolite form from the channel volume. The resulting ethylene was mainly adsorbed at strong Lewis sites and converted into undesorbed condensation products.     

Ce-Beta分子筛的制备及其催化性能

采用简单、易重现的两步后合成法成功制备了Ce-Beta分子筛。制备过程中, H-Beta分子筛首先经过脱铝处理得到Si-Beta分子筛,然后再以异丙醇铈为前驱体,通过干法浸渍的途径向Si-Beta分子筛引入Ce (IV)。利用XRD, FT-IR, UV-Vis和1H MAS NMR等对其结构进行了表征,结果表明, Ce(IV)物种以四配位的形式成功引入Beta分子筛的骨架, Ce原子进入分子筛骨架的机理通过DRIFT光谱得以证实。通过环氧化合物水合制备1,2-二醇反应对所制的Ce-Beta催化剂进行了催化性能评价。     

无有机模板剂体系水热合成Beta沸石中晶种的导向机理(英文)

在无有机模板剂体系中研究了不同硅铝比和晶粒度Beta沸石晶种的结构导向行为,采用X射线衍射、X射线荧光光谱、扫描电镜、透射电镜、紫外-拉曼光谱、红外光谱和N2物理吸附等方法对不同晶化时间固相产物和Beta沸石产物进行了表征.结果表明,不同Beta沸石晶种,包括全硅晶种,均能够导向合成Beta沸石,而且晶种在晶化诱导期都发生溶解.但是,晶种的硅铝比、晶粒度、预处理(焙烧)以及晶种加入的时间对晶种的溶解行为、Beta沸石晶化过程和产物都有重要影响.形貌研究还发现,含铝晶种不仅溶解后的残体通过提供晶核聚集的"固载化"表面导向了新生Beta沸石小晶体的密集生长,而且溶解下来的结构片段也提供了分散的晶核导向形成相对分散的Beta沸石小晶体;全硅晶种则仅通过溶解下来的结构片段提供分散的晶核.在无模板体系中,使用适当高硅铝比、小晶粒和经过焙烧处理的Beta沸石作为晶种有利于合成得到高结晶度的Beta沸石纯相.     

Synthesis of dicationic ionic liquids and their application in the preparation of hierarchical zeolite Beta

Piperidine- and imidazole-based dicatoinic ionic liquids have been developed for the synthesis of zeolite Beta. Hierarchical Beta has a larger surface area and pore volume than conventional Beta. Beta derived from a dicationic ionic liquid exhibited remarkably higher catalytic activity than the conventional Beta. Experimental evidence and DFT calculations suggest that only a suitable conformation of such dicationic ionic liquids is able to form zeolite Beta (see scheme).     

Cu/Ni负载型Beta分子筛催化剂的乙醇水蒸气重整制氢催化性能研究

采用等体积浸渍的方式,在全硅Beta分子筛载体上担载Cu、Ni活性组分,制备出一系列xCuyNi-ABZ多功能乙醇水蒸气重整制氢催化剂。通过XRD、TEM、SEM-EDX以及XPS等多种表征手段,研究催化剂的结构特性、活性组分含量等因素对催化性能的影响,依据反应产物分布,揭示其作用机理。结果表明,以Beta分子筛为载体可促使活性组分以纳米颗粒的形式高度分散于载体表面,并且存在较强的载体-金属作用力。与传统SiO_2为载体催化剂相比,2.5Cu2.5Ni-ABZ催化剂具备良好的乙醇水蒸气重整催化性能,当反应温度为450℃,实现100%的乙醇转化率和67.23%的H_2选择性,且副产物CO(4.14%)、CH_4(5.65%)含量相对较低。这可归因于Cu和Ni活性组分间的高效协同作用,Cu具有良好的乙醇脱氢性能,生成反应中间体乙醛;在反应过程中,乙醛的重整和分解是两个受温度影响的竞争反应,Ni组分利用其较强的C-C键断裂能力,随温度的升高,乙醛重整反应占主导作用,生成目标产物H_2。通过对反应后样品分析表明,2.5Cu2.5Ni-ABZ催化剂具备良好的抗烧结和抗积炭催化性能。     

Preparation and study of Mn-containing silicates of zeolite structure

The Cu–SiO₂ catalyst prepared by ion exchange method shows a longer life for the dehydrogenation of methanol, as compared with those of Cu catalysts prepared by other methods. This suggests that the highly dispersed Cu particles on the support cannot be easily aggregated during the reaction.

---

Cu–SiO₂, , , , . , .

     

添加剂PVP和MTS对合成Beta分子筛结构与性能的影响

分别以铝酸钠和硅溶胶为铝源和硅源,四乙基氢氧化铵为模板剂,在水热条件下,考察了添加剂(聚乙烯吡咯烷酮(PVP)和甲基三乙氧基硅烷(MTS))对合成Beta分子筛结构与性能的影响,并通过XRD、TEM、BET、ICP、~(29)Si-NMR和NH_3-TPD等方法对合成样品进行了结构表征和作用机理讨论,同时以催化裂化异丙苯为模型反应评价其催化性能。结果表明,与传统Beta分子筛相比,加入PVP后所得样品具有更高结晶度和较高的硅铝物质的量比(25.68)以及较大的比表面积(772 m~2/g);而加入MTS后尽管具有较大比表面积(657 m~2/g)和较高硅铝物质的量比(25.76),但是结晶度却相对降低,且粒径减小(160-320 nm)。两种添加剂作用下所得样品均具有更多酸量,在催化裂化异丙苯的反应中表现出较高的催化活性。     

Preparation and properties of borosilicates with a zeolite structure

The dependence of the state of boron atoms on the preparation conditions of borosilicates and the effect of this state on their catalytic properties in methanol conversion have been studied.

---

, .

     

Preparation and gas separation properties of zeolite T membrane

Zeolite T membranes were synthesized on tubular porous mullite tubes by hydrothermal synthesis. The membranes selectively permeated carbon dioxide from CO2/CH4 and CO2/N2 mixtures with high separation performances, which were due to combined effects of molecular sieving and competitive adsorption.     

Preparation of metallosilicates with zeolite structure by atom-planting method

Atom-planting, a useful method to prepare some metallosilicates having zeolitic structure, was proposed. By treatment of highly siliceous zeolite with metal chloride vapor at selected temperature, metal cation could be introduced into the defect sites (hydroxyl nests) of zeolite framework. By the atom-planting method, some metallosilicates which are difficult to be synthesized by hydrothermal synthesis could be prepared. The vapor phase shape-selective alkylation of ethylbenzene with ethanol, and the liquid phase selective oxidation with hydrogen peroxide on the metallosilicates prepared by atom-planting method were reviewed.     

Preparation and some properties of ion-exchange rhenium zeolite catalyst

Conclusions The rhenium zeolite catalyst, obtained from NaY by ion exchange with diethylenediaminedioxorhenium chloride, has a lower activity in the hydrogenation of benzene than the catalyst obtained by impregnating NaY with ammonium perrhenate solution.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 5, pp. 1181–1183, May, 1976.The authors express their gratitude to B. N. Ivanov-Emin for assistance in the work.     

Preparation and properties of zeolite coating on metal surface

Crystals of mordenite were grown on metallic Cr surface by the vapor phase method. The material of zeolite coating on metal surface has been characterized by X-ray powder diffraction and microprobe. It is shown by the results that this material possesses good catalytic properties.

---

(Cr) . . , .

     

Beta zeolite supported on a macroscopic pre-shaped SiC as a high performance catalyst for liquid-phase benzoylation

Preparation and characterisation of a highly active and stable beta zeolite supported on a pre-shaped silicon carbide catalyst for the benzoylation reaction in liquid phase.     

Preparation of an ordered zeolite MFI film by epitaxial growth

An ordered zeolite MFI film has been prepared on the substrate of a {001} basal face of high-quality large silicalite-1 crystals by epitaxial growth.