Surfactant-encapsulated clusters (SECs): (DODA)20(NH4)[H3Mo57V6(NO)6O183(H2O)18], a case study

We present a comprehensive study of the partially reduced polyoxomolybdate [H3-Mo57V6(NO)6O183(H2O)18]21-encapsulated in a shell of dimethyldioctadecylammonium (DODA) surfacmolecules. Treatment of an aqueous solution of (NH4)21[H3Mo57V6-(NO)6O183(H2O)18] . 65H2O (1a) with a trichloromethane solution of the surfactant leads to instant transfer of the encapsulated complex anion into the organic phase. Results from vibrational spectroscopy. analytical ultracentrifugation, small-angle X-ray scattering, transmission electron microscopy, elemental analysis, and Langmuir compression isotherms are consistent with a single polyoxometalate core encapsulated within a shell of 20 DODA molecules. The molar mass of the supramolecular assembly is 20249 gmol(-1) and the diameter is 3.5 nm. A material with the empirical formula (DODA)20(NH4)[H3-Mo57V6NO)6O183(H2O)18] (2) was isolated as a dark violet solid, which readily dissolves in organic solvents. Slow evaporation of solutions of 2 on solid substrates forces the hydrophobic particles to aggregate into a cubic lattice. Annealing these so-formed films at elevated temperature causes de-wetting with terrace formation similar to liquid crystals and block copolymers. Compound 2 forms a stable Langmuir monolayer at the air-water interface; Langmuir-Blodgett multilayers are readily prepared by repeated transfer of monolayers on solid substrates. The films were characterized by optical ellipsometry, Brewster angle microscopy, transmission electron microscopy, and X-ray reflectance.     

Formation of crystalline Na2V6O16·3H2O ribbons into belts and rings

Single-crystalline nanobelts and nanorings of Na(2)V(6)O(16)·3H(2)O structures have been facilely synthesized through a direct hydrothermal reaction between NaVO(3) and H(3)PO(4), without the addition of any harmful solvents or surfactants. The analytical techniques of scanning electron microscopy, transmission electron microscopy (TEM), powder X-ray diffraction, thermogravimetric analysis, energy-dispersive X-ray spectroscopy, Fourier transform infrared, high-resolution TEM, and selected-area electron diffraction have been used to characterize the morphology, composition, and structure of the synthesized products. The Na(2)V(6)O(16)·3H(2)O nanobelts are up to several hundreds of micrometers in length and 100-300 nm in thickness, and for nanorings, the diameters are 4.5-6.5 μm. H(3)PO(4) plays a key role in maintaining the pH of the solution as well as producing PO(4)(3-) ions in solution. The chemical reactions and a possible growth mechanism involved in the formation of Na(2)V(6)O(16)·3H(2)O nanobelts and nanorings are briefly discussed.     

Electron beam induced changes in transition metal oxides

Electron beam induced changes in maximal valence transition metal oxides V(2)O(5), M(o)O(3) and TiO(2) (anatase) were studied by means of electron energy-loss spectroscopy and electron diffraction in transmission electron microscopy. For V(2)O(5), the observed chemical shifts of the L-edge reveal the reduction of V(5+) to V(2+). The structure changes from orthorhombic V(2)O(5) to cubic VO. MoO(3) can be reduced to a phase with an oxidation state less than that in MoO(2). No notable structural or electronic change in TiO(2) (anatase) is observed. The different behaviours of the studied oxides under an electron beam are discussed with respect to bonding energy and lattice structure.     

碳包覆Na2Ti6O13纳米管的电化学性能研究

以金红石型TiO2和NaOH为原料,由水热反应制备Na2Ti6O13纳米管.然后,在含有0.1 mol.L-1NaOH的葡萄糖水溶液中反应4 h制得碳包覆的Na2Ti6O13纳米管.X射线衍射(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等分析表明,该碳包覆Na2Ti6O13纳米管外径约14～19 nm,内径约2～5 nm,长度为数百纳米,有一层厚度约为2 nm的碳层包覆在纳米管外壁.以其作为锂离子电池负极材料,恒电流充放电测试表明,在50 mA.g-1电流密度下首周可逆容量达到161 mAh.g-1,循环100周后容量保持在147 mAh.g-1.相比于Na2Ti6O13纳米管,提高了20%以上.电流密度升至1600 mA.g-1充放电,碳包覆Na2Ti6O13纳米管可逆容量仍有70 mAh.g-1左右,远高于Na2Ti6O13纳米管,表现出良好的倍率性能.     

Structural percolation in the PbM(1-x)M(x)'O(3) (M, M' =Ti, Cr, and V) perovskites

Structural properties and the influence of d electrons' insertion in PbTiO(3) have been determined in the study of PbM(1-x)M(x)'O(3) (M, M' = Ti, Cr, and V) solid solutions by means of X-ray diffraction, high-resolution transmission electron microscopy, magnetization measurements, and strain mapping analysis. PbTi(1-x)V(x)O(3) is the only system that preserves the same space group (P4mm) for all x, whereas PbTi(1-x)Cr(x)O(3) and PbV(1-x)Cr(x)O(3) change to cubic (Pm ?3m) at x = 0.30 and 0.4, respectively. These values have been related with the percolation threshold for a cubic net (P(c) = 0.31). The microscopy study coincides with the X-ray diffraction determination, and neither supercell nor short-range order maxima are observed. However, for x ≥ 0.7 in PbTi(1-x)Cr(x)O(3) the presence of modulated zones is observed in both the electron diffraction pattern as well as high-resolution transmission electron micrographs, as is typical for PbCrO(3). (1) Furthermore, the tetragonal region in PbV(1-x)Cr(x)O(3) suffers a great stress because of the contrast of [Cr-O(6)] octahedra and [V-O(5)] square-based pyramids end members basic units.     

V_2O_5/C催化氧化乙二醛制备乙醛酸

利用等体积浸渍法制备了V2O5/C催化剂,并应用于乙二醛的液相氧化反应,采用XRD、TEM手段对催化剂进行了物化性质表征.结果表明,V2O5/C对乙二醛的氧化表现出较高的催化活性和乙醛酸选择性,反应10h,乙二醛的转化率达29.2%,乙醛酸得率13.6%.与贵金属Pd-Bi/C催化剂相比,V2O5/C催化剂的稳定性和重复使用效果都比较好.     

支化侧链偶氮无规共聚物中空和类囊泡聚集体研究

研究了支化侧链型偶氮无规共聚物(PMAPB6P-AA)在THF/H2O混合溶液中的自组装行为.研究发现,通过缓慢增加体系的水含量,可以制备出具有中空结构的非球形聚集体.调节聚合物的初始浓度,可以得到不同粒径的聚集体.聚集体中偶氮生色团的光致异构化速率与异构化程度随聚合物初始浓度的增大而减小.在此基础上,采用更加缓慢的增加水含量的方法,使聚合物分子进行充分的疏水聚集与H-聚集,制备出类囊泡状聚集体.在紫外光照射条件下,观察到类囊泡聚集体发生了光致解聚集.     

溶胶-凝胶法制备Ni_2V_2O_7的丙烷氧化脱氢催化性能

以柠檬酸为配位剂,溶胶-凝胶法制备Ni2V2O7,采用X射线衍射、氮气物理吸附、电感耦合等离子体原子发射光谱、氢气程序升温还原、X射线光电子能谱和透射电子显微镜等技术对催化剂进行了表征.通过差热-热重分析,考察干凝胶分解为Ni2V2O7的温度以及分解过程的热效应并研究了不同焙烧温度与Ni2V2O7的形成、晶化程度之间的关系以及对丙烷氧化脱氢(ODH)制丙烯反应催化性能的影响.     

导电玻璃负载CuO/V_2O_5复合纳米纤维光电极的制备及光电催化性能

以聚乙烯吡咯烷酮(PVP)为高分子模板剂,乙酰丙酮钒(C_(15)H_(21)O_6V)和三水合硝酸铜[Cu(NO_3)_2·3H_2O]为原料,导电玻璃(FTO)为载体,结合溶胶-凝胶法和静电纺丝技术制备了前驱体纤维,经高温焙烧后得到分布均匀、具有纤维结构的导电玻璃负载的CuO/V_2O_5复合光电极(CuO/V_2O_5/FTO).采用热重-差热分析仪(TG-DTA)、X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和X射线光电子能谱仪(XPS)等对材料的结构进行表征,以亚甲基蓝(MB)为目标降解物,探讨了合成产物的光电催化性能.结果表明,CuO与V_2O_5能有效形成异质结构,其光电催化活性均比纯V_2O_5有明显提高,并且改变CuO与V_2O_5的比例对光电催化性能有较大影响,其中n(Cu)∶n(V)=1∶1时降解效率最高,达到96%.     

V2O3纳米粉末的固相反应合成(英)

Vanadium sesquioxide (V₂O₃) nanopowder was successfully prepared by the solid phase reaction of the mixture of vanadyl hydroxide (VO(OH)₂) and ammonium chloride (NH₄Cl) at 500 ℃. The as-obtained samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). V₂O₃ nanoparticles were well dispersed and displayed sphere-like particles with diameters in the range of 30～50 nm.     

花状NH4V4O10微纳米结构的水热制备及电化学嵌锂性能

通过水热法制备了花状NH4V4O10微纳米结构. 采用XRD,SEM,TEM,XPS等测试手段对样品结构、形貌和组成进行了表征. 实验结果表明,所制得的NH4V4O10花状结构是由直径约100 nm,长度为几微米的纳米带团簇而形成. 研究了反应体系中温度、时间等因素对NH4V4O10产物形貌的影响. 将制备的NH4V4O10组装成锂模拟扣式电池,考察了其电化学嵌锂性能. 研究结果显示,所制备的花状NH4V4O10具有较高的比容量（307 mAh?g-1）,有望作为锂离子电池的新型正极材料.     

SBA-16负载金属氧化物催化剂合成、表征及催化CO氧化反应活性

将V2O5, CeO2和CuO分散到提取自稻米壳的SBA-16上,考察了其催化CO氧化反应活性,并采用X射线衍射、扫描电镜、透射电镜、程序升温还原和紫外漫反射光谱对所制催化剂进行了表征。结果表明,掺杂CuO的介孔氧化硅是一种有前景的催化剂,其CO转化率可达98%以上。     

Morphological evolution of (NH4)(0.5)V2O5·mH2O fibers into belts, triangles, and rings

In this contribution, single-crystalline (NH(4))(0.5)V(2)O(5)·mH(2)O xerogels made of belts, rings, triangles, and ovals have been synthesized using a surfactant-free hydrothermal method. The analytical techniques of scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared (FTIR), high-resolution TEM (HRTEM), and selected area electron diffraction (SAED) have been used to characterize the morphology, composition, and structure of the as-prepared products. On the basis of SEM and TEM observations, we suggested that the as-prepared (NH(4))(0.5)V(2)O(5)·mH(2)O rings, triangles, and ovals have been formed by connecting two ends of the vanadium oxide sheet made of edge and corner sharing VO(5) square pyramids. The as-prepared (NH(4))(0.5)V(2)O(5)·mH(2)O nanobelts are up to several hundreds of micrometers long, 402-551 nm wide, and 235-305 nm thick. The thickness and width of the rings are respectively ～454 nm and ～1 μm. Triangles with three unequal sides having a thickness of ～143 nm and a width of ～1 μm were also formed. The crystalline orthorhombic phase of shcherbianite V(2)O(5) was obtained on calcination of (NH(4))(0.5)V(2)O(5)·mH(2)O at 350 °C for 2 h. The SEM image of this V(2)O(5) product retains the parent morphology of the preheated compound. A possible reaction mechanism and the growth process involved in the formation of belts/rings/triangles and ovallike microstructures are discussed.     

The fabrication of one-dimensional Ca4Y6(SiO4)6O: Ln3+ (Ln=Eu, Tb) phosphors by electrospinning method and their luminescence properties

One-dimensional Ca(4)Y(6)(SiO(4))(6)O: Ln(3+) (Ln=Eu, Tb) microfibers were fabricated by a simple and cost-effective electrospinning method. X-ray diffraction (XRD) pattern and high-resolution transmission electron microscopy (HRTEM) confirmed that the fibers were composed of hexagonal Ca(4)Y(6)(SiO4)(6)O phase. Thermogravimetric and differential scanning calorimetry (TG-DSC) results showed that the Ca(4)Y(6)(SiO4)(6)O phase began to crystallize at 740°C. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results indicated that the diameter of as-prepared microfibers ranged from 390 to 900 nm and the diameter of the microfibers annealed at 1000°C ranged from to 120 to 260 nm. Under ultraviolet and low-voltage electron beams (3-5 kV) excitation, the Ca(4)Y(6)(SiO(4))(6)O: Ln(3+) (Ln=Eu, Tb) samples showed the red and green emission, corresponding to (5)D(0)→(7)F(2) transition of Eu(3+) and (5)D(4)→(7)F(5) transition of Tb(3+), respectively.     

泡沫镍载 NiCO2O4电极的制备及其催化 H2O2电氧化的性能

本文以水热法结合热处理法原位制备了泡沫镍载 NiCo₂O₄纳米线电极,使用XRD、SEM和TEM对合成的 NiCo₂O₄纳米线进行了表征,NiCo₂O₄纳米线直径约80 nm,长度约 3 ~ 5 μm. 使用循环伏安和计时电流法测试了泡沫镍载NiCo₂O₄纳米线催化H₂O₂的电氧化性能,结果表明泡沫镍载NiCo₂O₄纳米线对H₂O₂电氧化有着优良的催化活性、稳定性和传质性能,在0.3 V电位下0.4 mol·L ^-1 H₂O₂和2 mol·L ^-1 NaOH溶液中氧化电流可达380 mA·cm ^-2.     

Ce掺杂In_2O_3纳米纤维的制备及其三乙胺气敏性能(英文)

用简单有效的静电纺丝法制备了Ce掺杂的In2O3纳米纤维材料.采用X射线衍射(XRD)、透射电子显微镜(TEM)、高分辨率透射电子显微镜(HRTEM)和扫描电子显微镜(SEM)对合成样品的晶体结构和形貌进行了表征.结果显示,此纤维材料的平均直径约为90nm,长度达到几十个微米.气敏性能测试结果表明,4%(w)Ce掺杂的In2O3纳米纤维对三乙胺的灵敏度最高,该气敏元件对3μL·L-1三乙胺的灵敏度达到2.6,响应时间为5s,恢复时间约为6s,且具有较好的选择性.     

Effects of Adsorbed Polyaniline on Redox Processes on As(2)O(3) Surfaces

Polyaniline deposited on As(2)O(3) surface resulted in a new material, which was characterized by infrared spectoscopy, thermogravimetry, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, and cyclic voltammetry. The mass percentage of polymer deposited on oxide surface is approximately 13%. The scanning electron microscopy images as well as the X-ray diffraction patterns provided conclusive evidence that the oxide surface is coated by the polymer. The cyclic voltammograms of the polyaniline adsorbed on As(2)O(3) surface showed that the adsorbate exerts remarkable effects on redox processes on this oxide. The pure oxide exhibited two oxidation/reduction peaks at 0.25/-0.06 and 0.47/-0.25 V attributed tentatively to the processes As(2)O(3)(s)+6H(+)+6e(-)=2As(s)+3H(2)O and As(s)+3H(+)+3e(-)=AsH(3)(g), respectively. The polyaniline-coated sample exhibited a better-defined voltammogram in which the first oxidation peak of the oxide had its intensity increased about four times. Copyright 2000 Academic Press.     

氧化铈的结构对其热稳定性及催化丙烷氧化脱氢反应性能的影响

采用湿化学法制备了低维氧化铈的纳米棒和纳米颗粒,通过原位X射线粉末衍射、透射电镜和N2物理吸附等技术研究了氧化铈纳米结构对其热稳定性的影响.结果表明,氧化铈纳米棒的稳定性更高.采用浸渍法制备了氧化铈负载的氧化钒催化剂,并用于丙烷氧化脱氢反应中,发现以氧化铈纳米棒为载体的催化剂表现出更高的丙烯选择性,这可能是由于棒状结构的开放性有利于产物丙烯的直接扩散.     

Co3O4纳米片的制备及对H2O2电还原反应的催化性能简

通过恒电势电沉积和加热处理在泡沫镍基体上制备了Co3O4纳米片. 利用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)和X射线光电子能谱(XPS)等手段对纳米片的形貌和结构进行了表征. 采用线性伏安扫描和计时电流技术研究了Co3O4纳米片电极对H2O2的电还原性能. 结果表明,在3.0 mol/L KOH 和 0.4 mol/L H2O2溶液中,当电压为-0.4 V(vs. Ag/AgCl)时,线性伏安扫描电流密度达到-0.386 A/cm2,在1000 s 测试时间内,计时电流密度衰减很小,表明Co3O4纳米片电极对H2O2具有很高的活性和稳定性.     

Analytical electron microscopy studies of lithium aluminum hydrides with Ti- and V-based additives

The microstructure of LiAlD(4) with TiCl(3).1/3(AlCl(3)) and VCl(3) additives has been studied during different steps of the decomposition process using electron energy loss spectroscopy and energy-dispersive X-ray spectroscopy in a scanning transmission electron microscope. Energy filtered transmission electron microscopy was used to show elemental distributions in the samples. The spatial distribution of the additives and the main elements within the alanate particles was examined with a resolution of a few nanometers. The analysis of the electron energy loss spectra reveals the chemical state of Al, O, and the additives. Ti and V do not appear to mix chemically with Al to a significant degree. V was found in high concentration in just a few particles, while Ti is more uniformly distributed. All the samples showed evidence of oxidation despite procedures being adopted to avoid exposing the material to air. The additives are oxidized in all the samples, and Al(2)O(3) forms a thin layer at the surface of the particles. This paper gives a comparison between samples at different stages of the decomposition process using different additives.