接枝树形支化分子双亲性嵌段共聚肽的合成及性能研究

分别以叠氮丙胺和丙炔胺为引发剂,采用氨基酸环内酸酐开环聚合法(NCA-ROP),引发L-谷氨酸-γ-苄酯-N-羧基-环内酸酐和L-谷氨酸-γ-氯乙醇酯-N-羧基-环内酸酐聚合得到链端基为叠氮基的聚(L-谷氨酸-γ-苄酯)(PBLG)和链端基为炔基的聚(L-谷氨酸-γ-氯乙醇酯)(PCELG)均聚物.联合点击化学法(click chemistry)制备了一系列聚(L-谷氨酸-γ-苄酯)-b-聚(L-谷氨酸-γ-氯乙醇酯)(PBLG-b-PCELG),再通过对嵌段共聚物侧基氯进行化学修饰,将二代的甲基烷氧醚类亲水性树形枝化分子(G2)接枝到侧链上,形成一系列树形支化分子接枝聚肽双亲性嵌段共聚物,通过核磁(NMR)、红外光谱(IR)和凝胶渗透色谱(GPC)对其化学结构进行了表征,并采用紫外-可见光谱(UV-Vis)研究了聚合物结构及其溶液浓度对其温敏行为的影响规律.     

两亲刚性三嵌段聚多肽的合成及其自组装行为

通过胱胺三甲基硅氮烷(N-TMS)引发N-羧基内酸苷(NCA)开环聚合,合成了2种两亲刚性三嵌段聚多肽聚(L-赖氨酸-ε-端甲基二缩乙二醇酰胺)-b-聚(L-谷氨酸-γ-苄酯)-b-聚(L-赖氨酸-ε-端甲基二缩乙二醇酰胺)(P[Lys-(EG)_2]-b-PBLG-b-P[Lys-(EG)_2])和聚(L-谷氨酸-γ-苄酯)-b-聚(L-赖氨酸-端甲基二缩乙二醇酰胺)-b-聚(L-谷氨酸-γ-苄酯)(PBLG-b-P[Lys-(EG)_2]-bPBLG),并用其在N,N-二甲基甲酰胺(DMF)-水的混合溶液中制备了三嵌段聚多肽的自组装体。采用核磁共振氢谱(1 H-NMR)和凝胶渗透色谱(GPC)表征了三嵌段聚多肽的结构,通过透射电子显微镜(TEM)研究了三嵌段聚多肽在混合溶液中的自组装行为。结果表明:通过N-TMS引发NCA开环聚合得到的三嵌段聚多肽的分子量与其理论值基本一致,且分子量分布窄;聚多肽在DMF-水的混合溶液中分别形成了球状胶束、大复合胶束、棒状大复合胶束等组装体;其自组装行为与特殊的全刚性嵌段结构有关。     

温度和pH值双敏感的生物相容性三嵌段共聚物聚(2-乙基-2-噁唑啉)-b-聚(ε-己内酯)-b-聚(L-谷氨酸)的合成和表征

研究了由温敏的聚(2-乙基-2-噁唑啉)和pH值敏感的聚(L-谷氨酸)组成的三嵌段共聚物,聚(2-乙基-2-噁唑啉)-b-聚(ε-己内酯)-b-聚(L-谷氨酸)的合成方法,(1)以对甲苯磺酸甲酯为引发剂引发2-乙基-2-噁唑啉进行正离子开环聚合反应,得到了羟基封端的聚(2-乙基-2-噁唑啉)(PEOz-OH);(2)以PEOz-OH为引发剂,以辛酸亚锡为催化剂,在氯苯中合成了PEOz-b-聚(ε-己内酯)两嵌段共聚物(PEOz-b-PCL-OH);(3)将PEOz-b-PCL-OH末端的羟基转换为氨基,得到氨基封端的两嵌段共聚物(PEOz-b-PCL-NH2);(4)以PEOz-b-PCL-NH2为引发剂引发γ-苄基-L-谷氨酸-N-羧酸酐(BLG-NCA)开环聚合,得到了PEOz-b-PCL-b-聚(γ-苄基-L-谷氨酸)(PEOz-b-PCL-b-PBLG)三嵌段共聚物;(5)以HBr的醋酸溶液为脱保护剂脱去苄基保护基,得到PEOz-b-PCL-b-聚(L-谷氨酸)(PEOz-b-PCL-b-PLGlu)三嵌段共聚物.采用1H-NMR、GPC和FT-IR表征了各步聚合物的结构、分子量和分子量分布.     

温度和pH值双敏感的生物相容性三嵌段共聚物聚(2-乙基-2- 唑啉)-b-聚(ε-己内酯) -b-聚(L-谷氨酸)的合成和表征

研究了由温敏的聚(2-乙基-2-噁唑啉)和pH值敏感的聚(L-谷氨酸)组成的三嵌段共聚物,聚(2-乙基-2-噁唑啉)-b-聚(ε-己内酯)-b-聚(L-谷氨酸)的合成方法,(1)以对甲苯磺酸甲酯为引发剂引发2-乙基-2-噁唑啉进行正离子开环聚合反应,得到了羟基封端的聚(2-乙基-2-噁唑啉)(PEOz-OH);(2)以PEOz-OH为引发剂,以辛酸亚锡为催化剂,在氯苯中合成了PEOz-b-聚(ε-己内酯)两嵌段共聚物(PEOz-b-PCL-OH);(3)将PEOz-b-PCL-OH末端的羟基转换为氨基,得到氨基封端的两嵌段共聚物(PEOz-b-PCL-NH2);(4)以PEOz-b-PCL-NH2为引发剂引发γ-苄基-L-谷氨酸-N-羧酸酐(BLG-NCA)开环聚合,得到了PEOz-b-PCL-b-聚(γ-苄基-L-谷氨酸)(PEOz-b-PCL-b-PBLG)三嵌段共聚物;(5)以HBr的醋酸溶液为脱保护剂脱去苄基保护基,得到PEOz-b-PCL-b-聚(L-谷氨酸)(PEOz-b-PCL-b-PLGlu)三嵌段共聚物.采用1H-NMR、GPC和FT-IR表征了各步聚合物的结构、分子量和分子量分布.     

聚L-谷氨酸γ-苄酯的合成及其结晶结构的研究

利用L-谷氨酸苄酯与三光气反应制备了N-羧基-L-谷氨酸γ-苄酯-环内酸酐(NCA),以正已胺为引发剂,引发NCA开环聚合,合成了分子量为6700的聚L-谷氨酸γ-苄酯(PBLG).利用核磁共振仪(1 H-NMR)、凝胶渗透色谱(GPC)、傅里叶变换红外光谱(FTIR)以及一维大角X射线衍射仪(1D-WAXD)等表征手...     

聚肽刚性链/聚氧化丙烯嵌段共聚物的合成与相行为

采用活性阴离子聚合方法,以不同分子量的聚氧化丙烯为引发剂合成了不同分子量的聚（γ－苯甲酯－L－谷氨酸）嵌段共聚物,并用^1H-NMR、IR和偏光显微镜等方法对共聚物进行了表征。结果表明：在1,1,2,2－四氨乙烷中,当溶液浓度一定时,聚（γ－苯甲酯－L－谷氨酸）嵌段共聚物呈现出胆甾型液晶的性质。温度升高时,聚（γ－苯甲酯－L－谷氨酸）共聚物的液晶相溶液发生相转变行为,并且其液晶相稳定性低于相同分子量的聚（γ－苯甲酯－L－谷氨酸）。这与利用Flory-Matheson的构象可变液晶分子理论模型的计算结果相一致。     

电场对聚肽液晶相行为的影响

聚合物液晶的相转变不仅可以通过溶液温度或聚合物的浓度的改变来实现,也可以通过施加外电场、磁场等取向场来达到．在二氧六环、氯仿、间甲酚等支持聚肽a一螺旋构象的溶剂中,当PBLG(聚L-谷氨酸γ-苯甲酯)达到一定的浓度会形成胆甾型溶致液晶．对这种液晶施加强度足够     

基于聚氨基酸的线型-树状聚两性电解质的合成及pH响应性研究

采用开环聚合、发散法以及"点击化学法"合成了线型-树状聚两性电解质.首先通过γ-苄基-L-谷氨酸酯羧酸酐(BLG-NCA)的开环聚合及发散合成法分别合成了叠氮端基聚(γ-苄基-L-谷氨酸酯)(PBLG-N3)及以炔基为内核的带有4个伯氨端基的第2.0代聚酰胺-胺(PAMAM-D2),再将二者通过"点击反应"制备的线型-树状嵌段共聚物PBLG-b-D2作为大分子引发剂,利用其末端氨基引发ε-苄氧羰基-L-赖氨酸羧酸酐(ZLL-NCA)的开环聚合,获得线型-树状嵌段共聚物PBLG-b-D2-(PZLL)4,再经酸解脱除PBLG上的苄基及PZLL上的苄氧羰基,获得目标产物聚(L-谷氨酸)-b-聚[酰胺-胺-聚(L-赖氨酸)](PLGA50-b-D2-(PLL9)4)线型-树状聚两性电解质.通过核磁(1H-NMR)、傅里叶变换红外光谱(FTIR)和凝胶渗透色谱(GPC)表征了聚合物分子结构、分子量及其分布;通过电导滴定法、1H-NMR、zeta电位、激光光散射(LLS)、扫描电子显微镜(SEM)及圆二色谱(CD)等方法研究了PLGA50-b-D2-(PLL9)4对溶液pH值响应性.结果表明随溶液pH由酸性转变为碱性,PLGA50-b-D2-(PLL9)4显示出了多重胶束化行为,同时不对称的线型-树状分子拓扑结构影响了聚集体的形貌,在酸性pH值下形成以PLGA为核的球形胶束,而在碱性pH值下形成以PLL为核的棒状胶束,并分别伴随着PLGA及PLL链段构象从无规线团向螺旋构象的转变.     

双响应性嵌段共聚物聚异丙基丙烯酰胺-b-聚(L-谷氨酸)的合成与表征

通过组合可逆加成-断裂链转移自由基聚合(RAFT)和氨基酸可控开环聚合(ROP)两种方法,合成得到聚异丙基丙烯酰胺-b-聚(L-谷氨酸)嵌段共聚物(PNIPAAm55-b-PLGA35).以5-氨基戊醇、12-硫醇等为原料,合成了新型的芴甲氧基保护的三硫酯链转移剂.使用核磁氢谱、凝胶排阻色谱对产物进行验证.并通过紫外-可见分光光度法、透射电镜、动态光散射表征,证明了该嵌段共聚物具有刺激响应性的胶束化行为.     

三嵌段聚乳酸在溶剂中结晶驱动自组装

以端羟基聚二甲基硅氧烷(HO-PDMS-OH)为引发剂,引发L-丙交酯(L-LA)开环聚合,合成了4种三嵌段聚合物聚(L-丙交酯)-b-聚二甲基硅氧烷-b-聚(L-丙交酯)(PLLA-b-PDMS-bPLLA)。其中,聚二甲基硅氧烷(PDMS)含有74个结构单元,聚(L-丙交酯)(PLLA)的结构单元数分别是82、150、224和280。用凝胶渗透色谱仪(GPC)表征了聚合物分子量及分子量分布。将这4种三嵌段聚合物分别溶解在N,N-二甲基甲酰胺(DMF)中,在恒温水槽中静置48h,可分别组装成螺旋线聚集体以及"eye-like"聚集体。PLLA-b-PDMS-b-PLLA的组装主要由PLLA嵌段的结晶驱动。最后采用广角X射线衍射(WAXD)、透射电镜(TEM)、原子力显微镜(AFM)对聚集体进行了相关表征。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.