受体型有机光伏材料苝二酰亚胺

苝二酰亚胺作为一种典型的n型材料,具有可见光区强吸收、光和热稳定性较高等突出优点,近年来应用到有机光伏达电池中。本文介绍了苝二酰亚胺及其各种衍生物的结构和性质,综述了其用作有机光伏受体材料（包括小分子型苝二酰亚胺材料、含苝二酰亚胺受体单元的给体-受体双功能分子和含苝二酰亚胺受体单元的给体-受体双缆型聚合物材料）的最新研究进展。     

High-efficiency quaternary polymer solar cells enabled with binary fullerene additives to reduce nonfullerene acceptor optical band gap and improve carriers transport

The polymer/small-molecule electron donor and nonfullerene organic electron acceptor are of structural similarity with both donor and acceptor molecules consisting of polycyclic fused-ring backbone and being decorated with alkyl-chains.In this study,we report that the introduction of binary fullerenes(C_(60)-/C_(70)-PCBM and C_(60)-/C_(70)-ICBA)into a nonfullerene binary system PBDB-T:ITIC reduces the polymer-nonfullerene acceptor intermixing,obtaining higher crystallinity with(100)crystal coherence length from 28 to 29–33 nm for the ITIC,and from 14 to 20–24 nm for the PBDB-T,and improved electron and hole mobilities both.Unprecedentedly,such a protocol reduces the ITIC optical band gap from 1.59 to 1.55 eV.As consequences,higher short-circuit current-density(17.8–18.4 vs.15.8 m A/cm~2),open-circuit voltage(0.92 vs.0.90 V)and fill-factor(0.72–0.73 vs.0.68)are simultaneously obtained,which ultimately afford higher efficient quaternary polymer solar cells with power conversion efficiencies(PCEs)up to 12.0%–12.8%comparing to the host binary device with 9.9%efficiency.For the polymer,ITIC,and ICBA/PCBM ternary blends,11%PCEs were recorded.The use of PCBM leads to larger red-shifting in thin film absorption and external quantum efficiency(EQE)response.Such effect is more pronounced when ICBA:PCBM mixture is used.These results indicate the size and shape of C_(60)and C_(70)as well as the substituent position of the second indene unit on C_(60)-/C_(70)-ICBA affect not only the blend morphology but also the electronic coupling in BHJ mixtures:the quaternary device performance increased in sequences of C_(70)-PCBM:C_(70)-ICBA→C_(70)-PCBM:C_(60)-ICBA→C_(60)-PCBM:C_(70)-ICBA→C_(60)-PCBM:C_(60)-ICBA.The resonant soft X-ray scattering(RSoXS)data indicated the most refined phase separation in the C_(60)-PCBM:C_(60)-ICBA based blend,corresponding to its best device function among the quaternary devices.These results indicate that the using of binary fullerenes as the acceptor additives allows for tuning nonfullerene blended film’s optical properties and filmmorphologies,shedding light on the designing high-performance multi-acceptor polymer solar cells.     

Thiophene-substituted fulleropyrrolidine derivatives as acceptor molecules in a thin film organic solar cell

A study of the design of thiophene-substituted fulleropyrrolidine derivatives as the acceptor in photovoltaic cells has been carried out using poly(3-hexylthiophene) (P3HT) as the model donor polymer. It was found that five types of thiophene-substituted fulleropyrrolidine worked as a good acceptor partner with P3HT, and the highest power conversion efficiency (PCE) was obtained for 1-(2-(2-methoxyethoxy)ethyl)-2-(2-thiophen-2-yl)fulleropyrrolidine (2.99%); this is superior to that of the P3HT polymer including methyl [C60]-PCBM under the same experimental conditions.     

Push-pull molecules bearing a hydrazonocyclopentadiene acceptor moiety: from the synthesis to organic photovoltaic applications

1. Download : Download high-res image (102KB)
2. Download : Download full-size image

     

Steric control of the donor/acceptor interface: implications in organic photovoltaic charge generation

The performance of organic photovoltaic (OPV) devices is currently limited by modest short-circuit current densities. Approaches toward improving this output parameter may provide new avenues to advance OPV technologies and the basic science of charge transfer in organic semiconductors. This work highlights how steric control of the charge separation interface can be effectively tuned in OPV devices. By introducing an octylphenyl substituent onto the investigated polymer backbones, the thermally relaxed charge-transfer state, and potentially excited charge-transfer states, can be raised in energy. This decreases the barrier to charge separation and results in increased photocurrent generation. This finding is of particular significance for nonfullerene OPVs, which have many potential advantages such as tunable energy levels and spectral breadth, but are prone to poor exciton separation efficiencies. Computational, spectroscopic, and synthetic methods were combined to develop a structure-property relationship that correlates polymer substituents with charge-transfer state energies and, ultimately, device efficiencies.     

High efficiency ternary organic solar cells enabled by compatible dual-donor strategy with planar conjugated structures

Ternary organic solar cells(OSCs) have received extensive attention for improving the power conversion efficiency(PCE) of organic photovoltaics(OPVs). In this work, a novel donor material(ECTBD) consisting of benzodithiophene(BDT) central electron donor unit was developed and synthesized. The small molecular donor has the same central unit as PM6. The addition of ECTBD into PM6:Y6 system could improve the morphology of active blend layer. In addition, ECTBD showed good morphologically compatibility when blending with PM6:Y6 host, resulting in the improvement of fill factor and current density. As a result, the ternary devices based on PM6:ECTBD:Y6 ternary system achieved a highest PCE of 16.51% with fill factor of 76.24%, which was much higher than that of the binary devices(15.7%). Overall, this work provided an effective strategy to fabricate highly efficient ternary organic solar cells through design of the novel small molecular donor as the third component.     

Designing spirobifullerene core based three-dimensional cross shape acceptor materials with promising photovoltaic properties for high-efficiency organic solar cells

The development of organic electron acceptor materials is one of the key factors for realizing high-performance organic solar cells (OSCs). Nonfullerene electron acceptors, compared to traditional fullerene acceptor materials, have gained much impetus owing to their better optoelectronic tunabilities and lower cost, as well as higher stability. Therefore, 5 three-dimensional (3D) cross-shaped acceptor materials having a spirobifullerene core flanked with 2,1,3-benzothiadiazole are designed from a recently synthesized highly efficient acceptor molecule SF(BR) ₄ and are investigated in detail with regard to their use as acceptor molecules in OSCs. The density functional theory (DFT) and time-dependent DFT (TDDFT) calculations have been performed for the estimation of frontier molecular orbital (FMO) analysis, density of states analysis, reorganization energies of electron and hole, dipole moment, open-circuit voltage, photo-physical characteristics, and transition density matrix analysis. In addition, the structure-property relationship is studied, and the influence of end-capped acceptor modifications on photovoltaic, photo-physical, and electronic properties of newly selected molecules ( H1-H5 ) is calculated and compared with reference ( R ) acceptor molecule SF(BR) ₄ . The structural tailoring at terminals was found to effectively tune the FMO band gap, energy levels, absorption spectra, open-circuit voltage, reorganization energy, and binding energy value in selected molecules H1 to H5 . The 3D cross-shaped molecules H1 to H5 suppress the intermolecular aggregation in PTB7-Th blend, which leads to high efficiency of acceptor material H1 to H5 in OSCs. Consequently, better optoelectronic properties are achieved from designed molecules H1 to H5 . It is proposed that the conceptualized molecules are superior than highly efficient spirobifullerene core-based SF(BR) ₄ acceptor molecules and, thus, are recommended to experiments for future developments of highly efficient solar cells.     

Design of bicontinuous donor/acceptor morphologies for use as organic solar cell active layers

In recent works, we demonstrated the achievement of bicontinuous donor/acceptor morphologies by the addition of conjugated block copolymers to a blend of conjugated homopolymer donors and fullerene acceptors. However, the domain sizes resulting in experiments were much larger than those of interest for high‐performance organic solar cells. Moreover, a significant concentration of fullerene acceptors was present in the donor domains. Here, we utilize simulations to study the bicontinuous donor/acceptor morphologies that result for different parametric conditions. Using such results, we provide guidelines for how to blend polymer materials to give rise to bicontinuous phases with the smaller and more compositionally pure domains that are desirable for organic photovoltaic applications. Our results can be generalized to treat a large range of donor and acceptor monomers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 884–895     

Metal-free organic dyes with benzothiadiazole as an internal acceptor for dye-sensitized solar cells

We synthesized three metal-free organic dyes (H11–H13) consisting of a 3,6-disubstituted carbazole, benzothiadiazole, and cyanoacrylic acid. All the dyes exhibited high molar extinction coefficients and suitable energy levels for electron transfer from the electrolyte to the TiO₂ nanoparticles. Under standard AM 1.5G solar irradiation, the device using dye H13 with co-adsorbed chenodeoxycholic acid (CDCA) displayed the best performance: an open-circuit voltage (V_oc) of 0.71 V, a short-circuit current density (J_sc) of 12.69 mA cm⁻², a fill factor (FF) of 0.71, and a power conversion efficiency (PCE) of 6.32%. The PCE was ∼79% of that for commercially available N719 cells (8.02%) under the same conditions.     

New quinoxaline derivatives as accepting units in donor–acceptor type low‐band gap polymers for organic photovoltaic cells

A series of new donor–acceptor‐type low‐band‐gap semiconducting polymers were synthesized as electron donors for organic photovoltaic cells. The polymers comprised quinoxaline derivatives as the acceptors and a benzodithiophene (BDT) derivative as the donors. 5,8‐Dibromoquinoxaline (Qx), 8,11‐dibromobenzo[a]phenazine (BPz), 10,13‐dibromodibenzo[a,c]phenazine (DBPz), and 8,11‐dibromo‐5‐(9H‐carbazol‐9‐yl)benzo[a]phenazine) (CBPz) were synthesized and polymerized with 2,6‐bis(trimethyltin)?4,8‐diethylhexyloxybenzo‐[1,2‐b;3,4‐b]dithiophene (BDT) through Stille cross‐coupling to produce four types of fully conjugated semiconducting polymers: PBDT‐Qx, PBDT‐BPz, PBDT‐DBPz, and PBDT‐CBPz , respectively. Intramolecular charge transfer between the electron donating and accepting units in the polymeric backbone induced a broad absorption from 300 to 800 nm. The optical band gap energies of the polymers were measured from their absorption onsets to be 1.54–1.80 eV depending on the polymer structure. Solution‐processed field‐effect transistors were fabricated to measure the hole mobilities of the polymers, and bulk hetero‐junction photovoltaic devices were fabricated using the synthesized polymers as electron donors and fullerene derivatives as electron acceptors. One of these devices showed a high power conversion efficiency of 3.87% with an open‐circuit voltage of 0.78 V, a short‐circuit current of 9.68 mA/cm², and a fill factor of 0.51 under air mass 1.5 global (AM 1.5 G) illumination conditions (100 mW/cm²). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4136–4149     

A simple small molecule as the acceptor for fullerene-free organic solar cells

A simple small molecule named DICTiF was designed,synthesized and used as the acceptor for solution processed bulk-heterojunction solar cells with polymer PBDB-T as the donor.A power conversion efficiency of 7.11%was obtained.     

Low-cost organic photovoltaic materials with great application potentials enabled by developing isomerized non-fused ring acceptors

Benefitting from low cost and simple synthesis,simple structured non-fused ring acceptors(NFRAs) and polymer donors are crucial for the application of organic solar cells(OSCs).Herein,two isomerized NFRAs,namely 4T-FCl FCl and 4T-2F2Cl,are designed with end-group engineering,which modulates the electrostatic potential distributions and crystallinity of acceptors,and accordingly,the A/A and D/A intermolecular interactions.The OSC based on 4T-2F2Cl with strong D/A interactions shows a record-high ...     

Dynamic three-phase hollow fiber microextraction based on two immiscible organic solvents with automated movement of the acceptor phase

Dynamic three-phase hollow fiber liquid-liquid-liquid microextraction (HF-LLLME) based on two immiscible organic solvents, with automated movement of organic acceptor phase to facilitate mass transfer was introduced for the first time. Polycyclic aromatic hydrocarbons were used as model compounds and extracted from water and soil samples. The extraction involved filling an 8 cm length of hollow fiber with 25 μL of organic acceptor solvent using a microsyringe, followed by impregnation of the pores in the fiber wall with n-dodecane. The fiber was then immersed in 20 mL of aqueous sample solution. During extraction, the organic acceptor phase was repeatedly moved in the lumen of the hollow fiber by movement of the syringe plunger controlled by programmable syringe pump. Following this microextraction, 2 μL of organic acceptor phase was injected into gas chromatography-flame ionization detector. This new technique provided up to 554-fold preconcentration of the analytes under the optimized conditions. Good repeatabilities (with RSDs ≤8.4%) were obtained. Detection limits were in the range of 0.2-0.5 μg/L. The utilization of the proposed method for extraction of the polycyclic aromatic hydrocarbons from different real samples (such as water and soil samples) also gave good precision and recovery.     

A comparative study on the binding behaviors of beta-cyclodextrin and its two derivatives to four fanlike organic guests

Four fanlike organic compounds, 1-ethoxybenzene (EOB), 1-butoxybenzene (BOB), 1-dodecyloxybenzene (DOB), and 1-(dodecyloxy)-2-methoxybenzene (DOMB), were chosen as guests, and beta-cyclodextrin (beta-CD) and its two derivatives, mono(2-O-2-methyl)-beta-CD and mono(2-O-2-hydroxy-propyl)-beta-CD, were chosen as hosts. Energy changes involved in host-guest inclusion processes were clearly obtained by applying semiempirical PM3 calculations. According to this, probable structures of the host-guest inclusion complexes were proposed. The inclusion systems in aqueous solution were investigated by UV-vis spectroscopy and nuclear magnetic resonance ((1)H NMR) titration, and the formation constants (K) of the inclusion complexes were determined using the Benesi-Hildebrand equation. Moreover, two solid inclusion complexes of beta-CD with EOB and DOB were prepared and characterized by Fourier transform infrared spectra, X-ray powder diffraction, (1)H NMR, electrospray ionization mass spectrometry, and thermogravimetric analyses. Results showed that the host-guest stoichiometries in the inclusion complexes were all 1:1 both in solid state and in aqueous solution. As for the same host, the values of K increased in the order EOB < BOB < DOB, in strong association with the fan handle in the fanlike molecules; that is to say, the K values increased with increasing carbon chain length of substituent on benzene ring. In addition, the K values of DOMB complexes were larger than those of DOB complexes for the same CD, indicating that the introduction of an extra o-methoxyl group on DOB further stabilized the CD inclusion complexes. The decomposition activation energies of EOB-beta-CD and DOB-beta-CD were very similar but significantly larger than that of free beta-CD.     

Side‐chain effects on phenothiazine‐based donor–acceptor copolymer properties in organic photovoltaic devices

A series of new phenothiazine‐based donor–acceptor copolymers, P1 and P2, were synthesized via a Suzuki coupling reaction. The weight‐averaged molecular weights (M_w) of P1 and P2 were found to be 16,700 and 16,100, with polydispersity indices of 1.74 and 1.39, respectively. The UV–visible absorption spectra of the polymer thin films contained three strong absorption bands in the ranges 318–320 nm, 430–436 nm, and 527–568 nm. The absorption peaks at 320 and 430 nm originated mainly from the phenothiazine‐based monomer units, and the longer wavelength absorption band at 527–568 nm was attributed to the increased effective conjugation length of the polymer backbones. Solution‐processed field‐effect transistors fabricated with these polymers exhibited p‐type organic thin film transistor characteristics. The field‐effect mobilities of P1 and P2 were measured to be 1.0 × 10^?4 and 7.5 × 10^?5 cm² V^?1 s^?1, respectively, with on/off ratios in the order of 10⁴ for all polymers. A photovoltaic device in which a P2/PC₇₁BM (1/3) blend film was used as the active layer exhibited an open‐circuit voltage (V_OC) of 0.70 V, a short‐circuit current (J_SC) of 6.79 mA cm⁽², a fill factor of 0.39, and a power conversion efficiency of 1.86% under AM 1.5 G (100 mW cm^?2) illumination. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Exploring the potential of tetraazaacene derivatives as photovoltaic materials with enhanced photovoltaic parameters

A series of D-π-A type molecules have been designed for their potential use in organic photovoltaic devices. Photovoltaic and optoelectronic properties of newly designed molecules have been explored by comparing with a reference molecule R comprising of the central core (2,3,8,9-tetrakis(thiophen-2-ylethynyl)-5,7,10,12-tetrakis((trimethylsilyl)ethynyl)pyrazino[2,3-b]phenazine) and π-bridge (thiophene). The end groups are (2-(2-ethylidene-3-oxo-2,3-dihydro-1H-inden-1 ylidene)malononitrile), (2-ethylidenemalonitrile), (methyl 2-cyanoacrylate) and (3-methyl-5-methylene-2-thioxothiazolidin-4-one) in the newly designed molecules. Among the investigated molecules M1 and M2 exhibit a broad absorption range of 627 and 626 nm with respect to the reference. All the designed molecules exhibited a lower bandgap as compared to R which indicates a better transfer of electron density from highest occupied molecular orbital (HOMO) to lowest unoccupied molecular orbital (LUMO). The reorganization energy values show that all designed molecules have efficient charge transport capability. This study proves that end-capped acceptor modification is an effective strategy for designing optimistic molecule for high performance future organic solar cells fabrication.     

Influence of the replacement of alkoxyl with alkylthienyl on photovoltaic properties of two small molecule donors for organic solar cells

Two benzo[1,2-b:4,5-b￠]dithiophene(BDT)-based small molecule(SM) donor materials with identical conjugated backbones but different substitution groups, named as DRTB-O and DRTB-T, were well explored to demonstrate the influence of the replacement of alkoxy with alkylthienyl on their photovoltaic properties in fullerene-based and fullerene-free organic solar cells(OSCs). The study shows that the two SM donors possess similar absorption spectra and energy levels but different crystalline structures in solid films. The carrier transport property and phase separation morphologies of the blend films have also been fully investigated.By employing PC71 BM as the acceptor, the power conversion efficiency(PCE) of DRTB-O:PC71BM and DRTB-T:PC71BM based devices were 4.91% and 7.08%, respectively. However, by blending with IDIC, the two SM donors exhibited distinctly different photovoltaic properties in fullerene-free OSCs, and the PCE of DRTB-O:IDIC and DRTB-T:IDIC based devices were 0.15% and9.06%, respectively. These results indicate that the replacement of alkoxyl with alkylthienyl in designing SM donor materials plays an important role in the application of fullerene-free OSCs.     

Cucurbit[7]uril host-guest complexes with small polar organic guests in aqueous solution

The host-guest stability constants for the inclusion of a series of small neutral polar organic guests in cucurbit[7]uril (CB[7]) have been determined in aqueous solution by (1)H NMR titrations. The dependence of the stability constant on the nature of the guests indicates that hydrophobic and dipole-quadrupole interactions are responsible for the binding. The complexation-induced chemical shift changes in the guest proton resonances, coupled with energy-minimization calculations, suggest that the guests are located such that their dipole moment is aligned perpendicular with the quadrupole moment of the CB[7] host. The stability constants for acetone and acetophenone decrease in the presence of Na(+) or K(+) cations as a result of cation capping of the CB[7] portals.