Ternary organic solar cells:Improved optical and morphological properties allow an enhanced efficiency

The power co nversion efficiency(PCE) of OFQx-T:PC_(71)BM blend films reaches 7.59%.On this basis,ternary organic solar cells(OSCs) were fabricated with ITIC or PTB7-Th as the third component.The ternary OSCs with 50 wt% ITIC in acceptors exhibits an enhanced efficiency,from 7.59% to 8.17%.Also,the PCE of ternary OSCs with 50 wt% PTB7-Th in donors achieves 8.72%,which is 13% higher than that of binary OSCs.The PCE improvement of two ternary OSCs is mainly due to the increase of short-circuit current density(J_(SC)),which can be attributed to the complementary absorption spectra and improved film morphology.This work suggests that the selection of an appropriate third component plays a critical role in improving the PCE of ternary OSCs.     

Dimer Acceptor Adopting a Flexible Linker for Efficient and Durable Organic Solar Cells

Organic solar cells (OSCs) have advanced rapidly due to the development of new photovoltaic materials. However, the long-term stability of OSCs still poses a severe challenge for their commercial deployment. To address this issue, a dimer acceptor (dT9TBO) with flexible linker is developed for incorporation into small-molecule acceptors to form molecular alloy with enhanced intermolecular packing and suppressed molecular diffusion to stabilize active layer morphology. Consequently, the PM6 : Y6 : dT9TBO-based device displays an improved power conversion efficiency (PCE) of 18.41 % with excellent thermal stability and negligible decay after being aged at 65 °C for 1800 h. Moreover, the PM6 : Y6 : dT9TBO-based flexible OSC also exhibits excellent mechanical durability, maintaining 95 % of its initial PCE after being bended repetitively for 1500 cycles. This work provides a simple and effective way to fine-tune the molecular packing with stabilized morphology to overcome the trade-off between OSC efficiency and stability.     

Over 16.7% efficiency of ternary organic photovoltaics by employing extra PC71BM as morphology regulator

Ternary organic photovoltaics(OPVs) are fabricated with PBDB-T-2 Cl:Y6(1:1.2, wt/wt) as the host system and extra PC_(71)BM as the third component. The PBDB-T-2 Cl:Y6 based binary OPVs exhibit a power conversion efficiency(PCE) of 15.49% with a short circuit current(J_(SC)) of 24.98 m A cm~(-2), an open circuit voltage(V_(OC)) of 0.868 V and a fill factor(FF) of 71.42%. A 16.71%PCE is obtained in the optimized ternary OPVs with PBDB-T-2 Cl:Y6:PC_(71)BM(1:1.2:0.2, wt/wt) active layer, resulting from the synchronously improved J_(SC) of 25.44 m A cm~(-2), FF of 75.66% and the constant V_(OC)of 0.868 V. The incorporated PC_(71)BM may prefer to mix with Y6 to finely adjust phase separation, domain size and molecular arrangement in ternary active layers, which can be confirmed from the characterization on morphology, 2 D grazing incidence small and wide-angle X-ray scattering, as well as Raman mapping. In addition, PC_(71)BM may prefer to mix with Y6 to form efficient electron transport channels, which should be conducive to charge transport and collection in the optimized ternary OPVs. This work provides more insight into the underlying reasons of the third component on performance improvement of ternary OPVs, indicating ternary strategy should be an efficient method to optimize active layers for synchronously improving photon harvesting, exciton dissociation and charge transport, while keeping the simple cell fabrication technology.     

A ternary organic solar cell with 300 nm thick active layer shows over 14% efficiency

In order to meet the requirements for making organic solar cells(OSCs) through solution printing techniques, great efforts have been devoted into developing high performance OSCs with relatively thicker active layers. In this work, a thick-film(300 nm)ternary OSC with a power conversion efficiency of 14.3% is fabricated by introducing phenyl-C_(61)-butyric-acid-methyl ester(PC_(61)BM) into a PBDB-T-2Cl:BTP-4 F host blend. The addition of PC_(61)BM is found to be helpful for improving the hole and electron mobilities, and thus facilitates charge transport as well as suppresses charge recombination in the active layers, leading to the improved efficiencies of OSCs with relatively thicker active layers. Our results demonstrate the feasibility of employing fullerene derivative PC_(61)BM to construct a high-efficiency thick-film ternary device, which would promote the development of thick layer ternary OSCs to fulfill the requirements of future roll to roll production.     

Single-wall carbon nanotube-containing cathode interfacial materials for high performance organic solar cells

Water/alcohol soluble cathode interfacial materials(CIMs)are playing important roles in optoelectronic devices such as organic light emitting diodes,perovskite solar cells and organic solar cells(OSCs).Herein,n-doped solution-processable single-wall carbon nanotubes(SWCNTs)-containing CIMs for OSCs are developed by dispersing SWCNTs to the typical CIMs perylene diimide(PDI)derivatives PDIN and PDINO.The Raman and X-ray photoelectron spectroscopy(XPS)measurement results illustrate the ndoped behavior of SWCNTs by PDIN/PDINO in the blend CIMs.The blended and n-doped SWCNTs can tune the work function and enhance the conductivity of the PDI-derivative/SWCNT(PDI-CNT)composite CIMs,and the composite CIMs can regulate and down-shift the work function of cathode,reduce the charge recombination,improve the charge extraction rate and enhance photovoltaic performance of the OSCs.High power conversion efficiency(PCE)of 17.1%and 17.7%are obtained for the OSCs based on PM6:Y6 and ternary PM6:Y6:PC₇₁ BM respectively with the PDI-CNTcomposites CIMs.These results indicate that the ndoped SWCNT-containing composites,like other n-doped nanomaterials such as zero dimensional fullerenes and two dimensional graphenes,are excellent CIMs for OSCs and could find potential applications in other optoelectronic devices.     

Double Asymmetric Core Optimizes Crystal Packing to Enable Selenophene-based Acceptor with Over 18 % Efficiency in Binary Organic Solar Cells

Side-chain tailoring is a promising method to optimize the performance of organic solar cells (OSCs). However, asymmetric alkyl chain-based small molecular acceptors (SMAs) are still difficult to afford. Herein, we adopted a novel asymmetric n-nonyl/undecyl substitution strategy and synthesized two A-D₁A′D₂-A double asymmetric isomeric SMAs with asymmetric selenophene-based central core for OSCs. Crystallographic analysis indicates that AYT9Se11-Cl forms a more compact and order intermolecular packing compared to AYT11Se9-Cl , which contributed to higher electron mobility in neat AYT9Se11-Cl film. Moreover, the PM6 : AYT9Se11-Cl blend film shows a better morphology with appropriate phase separation and distinct face-on orientation than PM6 : AYT11Se9-Cl . The OSCs with PM6 : AYT9Se11-Cl obtain a superior PCE of 18.12 % compared to PM6 : AYT11Se9-Cl (17.52 %), which is the best efficiency for the selenium-incorporated SMAs in binary BHJ OSCs. Our findings elucidate that the promising double asymmetric strategy with isomeric alkyl chains precisely modulates the crystal packing and enhances the photovoltaic efficiency of selenophene-incorporated SMAs.     

High electron mobility fluorinated indacenodithiophene small molecule acceptors for organic solar cells

Indacenodithiophene (IDT) derivatives are kinds of the most representative and widely used cores of small molecule acceptors (SMAs) in organic solar cells (OSCs). Here we systematically investigate the influence of end-group fluorination density and position on the photovoltaic properties of the IDT-based SMAs IDIC-nF (n = 0, 2, 4). The absorption edge of IDIC-nF red-shifts with the π-π stacking and crystallinity improvement, and their electronic energy levels downshift with increasing n. Due to the advantages of J_sc and FF as well as acceptable V_oc, the difluorinated IDIC-2F acceptor based OSCs achieve the highest power conversion efficiency (PCE) of 13%, better than the OSC devices based on IDIC and IDIC-4F as acceptors. And the photovoltaic performance of the PTQ10: IDIC-2F OSCs is insensitive to the active layer thickness: PCE still keep high values of 12.00% and 11.46% for the devices with active layer thickness of 80 and 354 nm, respectively. This work verifies that fine and delicate modulation of the SMAs molecular structure could optimize photovoltaic performance of the corresponding OSCs. Meanwhile, the thickness-insensitivity property of the OSCs has potential for large-scale and printable fabrication technology.     

17.1%-Efficiency organic photovoltaic cell enabled with two higher-LUMO-level acceptor guests as the quaternary strategy

Quaternary blended organic solar cells utilize four blended material components(one donor plus three acceptors, two donors and two acceptors, or three donors plus one acceptor) as the active layer materials. The use of four material components allows us to have more material selections and more mechanism choices to improve the photon-to-electron conversion efficiency. In this contribution, we present a new case of quaternary material system, that shows 17.1% efficiency obtained by adding IDIC and PC_(71)BM as the guest acceptors of the host binary of PM6:Y6. The lowest unoccupied molecular orbital(LUMO) levels of IDIC and PC_(71)BM are both higher than that of Y6, which is one reason to obtain increased open-circuit voltage(V_(oc)) in the quaternary device. Upon introduction of IDIC and PC_(71)BM as the acceptor guests, the hole and electron mobilities are both increased, which contributes to the increased short-circuit current-density(J_(sc)). Effects of the weight ratios of the three acceptor components are investigated, which demonstrates that the increased hole and electron mobilities, the accelerated hole-transfer, and the reduced monomolecular recombination are the factors contributing to the increased J_(sc)and fill-factor. This case of quaternary device demonstrates the applicability of the quaternary strategy in increasing the device functions and hence the efficiencies in the field of organic photovoltaic cells.     

Precise Methylation Yields Acceptor with Hydrogen-Bonding Network for High-Efficiency and Thermally Stable Polymer Solar Cells

Utilizing intermolecular hydrogen-bonding interactions stands for an effective approach in advancing the efficiency and stability of small-molecule acceptors (SMAs) for polymer solar cells. Herein, we synthesized three SMAs (Qo1, Qo2, and Qo3) using indeno[1,2-b]quinoxalin-11-one (Qox) as the electron-deficient group, with the incorporation of a methylation strategy. Through crystallographic analysis, it is observed that two Qox-based methylated acceptors (Qo2 and Qo3) exhibit multiple hydrogen bond-assisted 3D network transport structures, in contrast to the 2D transport structure observed in gem-dichlorinated counterpart (Qo4). Notably, Qo2 exhibits multiple and stronger hydrogen-bonding interactions compared with Qo3. Consequently, PM6 : Qo2 device realizes the highest power conversion efficiency (PCE) of 18.4 %, surpassing the efficiencies of devices based on Qo1 (15.8 %), Qo3 (16.7 %), and Qo4 (2.4 %). This remarkable PCE in PM6 : Qo2 device can be primarily ascribed to the enhanced donor-acceptor miscibility, more favorable medium structure, and more efficient charge transfer and collection behavior. Moreover, the PM6 : Qo2 device demonstrates exceptional thermal stability, retaining 82.8 % of its initial PCE after undergoing annealing at 65 °C for 250 hours. Our research showcases that precise methylation, particularly targeting the formation of intermolecular hydrogen-bonding interactions to tune crystal packing patterns, represents a promising strategy in the molecular design of efficient and stable SMAs.     

Facile,Versatile and Stepwise Synthesis of High-Performance Oligomer Acceptors for Stable Organic Solar Cells

Oligomer acceptors have recently emerged as promising photovoltaic materials for achieving high power conversion efficiency (PCE) and long-term stability in organic solar cells (OSCs). However, the limited availability of diverse acceptors, resulting from the sole synthetic approach, has hindered their potential for future industrialization. In this study, we present a facile and effective stepwise approach that utilizes two consecutive Stille coupling reactions for the synthesis of oligomer acceptors. To demonstrate the feasibility of the novel approach, we successfully synthesize a trimer acceptor, Tri-Y6-OD, and further systematically investigate the impact of oligomerization on device performance and stability. The results reveal that this approach has significant advantages compared to the conventional method, including reduced formation of unwanted by-products and lower difficulties in purification. Remarkably, the OSC based on PM6 : Tri-Y6-OD achieves an impressive PCE of 18.03 % and maintains 80 % of the initial PCE (T₈₀) for 1523 h under illumination, surpassing the performance of the corresponding small molecule acceptor Y6-OD-based device. Furthermore, the versatility of the synthetic strategy in obtaining diverse acceptors is further demonstrated. Overall, our findings provide a facile, versatile and stepwise way for synthesizing oligomer acceptors, thereby facilitating the development of stable and efficient OSCs.     

A Non‐Fullerene Acceptor with Chlorinated Thienyl Conjugated Side Chains for High‐Performance Polymer Solar Cells via Toluene Processing

Small molecular acceptors (SMAs) BTC‐2F and BTH‐2F, based on heptacyclic benzodi(cyclopentadithiophene) electron‐donating core (CBT) with chlorinated‐thienyl conjugated and thienyl conjugated side chains, respectively, are designed and synthesized. Compared with non‐chlorine acceptor BTH‐2F, BTC‐2F exhibits slightly blue‐shifted absorption spectra, similar the lowest unoccupied molecular orbital (LUMO) (–3.91 eV), deeper highest occupied molecular orbital (HOMO) energy level and higher electron mobility than that of BTH‐2F. PM6, a wide bandgap polymer, is selected as the donor material to construct bulk heterojunction polymer solar cells processed with nonhalogenated solvent toluene. The optimized PM6:BTC‐2F‐based device presents a 12.9% power conversion efficiency (PCE), while the PCE of PM6:BTH‐2F‐based device is only 11.3%. The results suggest that it is an effective strategy to optimize the photoelectric properties of SMAs by incorporating chlorine atom into the conjugated side chains.     

Achieving 16.68% efficiency ternary as-cast organic solar cells

State-of-the-art organic solar cells(OSCs)often require the use of high-boiling point additive or post-treatment such as temperature annealing and solvent vapor annealing to achieve the best efficiency.However,additives are not desirable in largescale industrial printing process,while post-treatment also increases the production cost.In this article,we report highly efficient ternary OSCs based on PM6:BTP-Cl Br1:BTP-2O-4Cl-C12(weight ratio=1:1:0.2),with 16.68%power conversion efficiency(PCE)for as-cast device,relatively close to its annealed counterpart(17.19%).Apart from obvious energy tuning effect and complementary absorption spectra,the improved PCE of ternary device is mainly attributed to improved morphological properties including the more favorable materials miscibility,crystallinity,domain size and vertical phase separation,which endorse suppressed recombination.The result of this work provides understanding and guidance for high-performance as-cast OSCs through the ternary strategy.     

Improving open-circuit voltage by a chlorinated polymer donor endows binary organic solar cells efficiencies over 17%

Power conversion efficiency(PCE) of single-junction polymer solar cells(PSCs) has made a remarkable breakthrough recently.Plenty of work was reported to achieve PCEs higher than 16% derived from the PM6:Y6 binary system.To further increase the PCEs of binary OSCs incorporating small molecular acceptor(SMA) Y6,we substituted PM6 with PM7 due to the deeper highest occupied molecular orbital(HOMO) of PM7.Consequently,the PM7:Y6 has achieved PCEs as high as 17.0% by the hotcast method,due to the improved open-circuit voltage(V_(OC)).Compared with PM6,the lower HOMO of PM7 increases the gap between E_(LUMO-donor) and E_(HOMO-acceptor),which is proportional to V_(OC).This research provides a high PCE for single-junction binary PSCs,which is meaningful for device fabrication related to PM7 and commercialization of PSCs.     

Giant Molecule Acceptor Enables Highly Efficient Organic Solar Cells Processed Using Non-halogenated Solvent

High efficiency organic solar cells (OSCs) based on A-DA′D-A type small molecule acceptors (SMAs) were mostly fabricated by toxic halogenated solvent processing, and power conversion efficiency (PCE) of the non-halogenated solvent processed OSCs is mainly restricted by the excessive aggregation of the SMAs. To address this issue, we developed two vinyl π-spacer linking-site isomerized giant molecule acceptors (GMAs) with the π-spacer linking on the inner carbon (EV-i) or out carbon (EV-o) of benzene end group of the SMA with longer alkyl side chains (ECOD) for the capability of non-halogenated solvent-processing. Interestingly, EV-i possesses a twisted molecular structure but enhanced conjugation, while EV-o shows a better planar molecular structure but weakened conjugation. The OSC with EV-i as acceptor processed by the non-halogenated solvent o-xylene (o-XY) demonstrated a higher PCE of 18.27 % than that of the devices based on the acceptor of ECOD (16.40 %) or EV-o (2.50 %). 18.27 % is one of the highest PCEs among the OSCs fabricated from non-halogenated solvents so far, benefitted from the suitable twisted structure, stronger absorbance and high charge carrier mobility of EV-i. The results indicate that the GMAs with suitable linking site would be the excellent candidates for fabricating high performance OSCs processed by non-halogenated solvents.     

High efficiency ternary organic solar cells enabled by compatible dual-donor strategy with planar conjugated structures

Ternary organic solar cells(OSCs) have received extensive attention for improving the power conversion efficiency(PCE) of organic photovoltaics(OPVs). In this work, a novel donor material(ECTBD) consisting of benzodithiophene(BDT) central electron donor unit was developed and synthesized. The small molecular donor has the same central unit as PM6. The addition of ECTBD into PM6:Y6 system could improve the morphology of active blend layer. In addition, ECTBD showed good morphologically compatibility when blending with PM6:Y6 host, resulting in the improvement of fill factor and current density. As a result, the ternary devices based on PM6:ECTBD:Y6 ternary system achieved a highest PCE of 16.51% with fill factor of 76.24%, which was much higher than that of the binary devices(15.7%). Overall, this work provided an effective strategy to fabricate highly efficient ternary organic solar cells through design of the novel small molecular donor as the third component.     

Two star-shaped small molecule donors based on benzodithiophene unit for organic solar cells

Star-shaped small molecules have attracted great attention for organic solar cells(OSCs) because they have three-dimensional charge-transport characteristics, strong light absorption capacities and easily tunable energy levels. Herein, three-and four-armed star-shaped small molecule donors, namely BDT-3 Th and BDT-4 Th, respectively, have been successfully designed and synthesized, which used benzodithiophene(BDT) as the central unit. The two star-shaped intermediates(2 a and 2 b) could be simul...     

Fluorination strategy enables greatly improved performance for organic solar cells based on polythiophene derivatives

The power conversion efficiencies(PCEs) of organic solar cells(OSCs) have reached 18% recently,which have already met the demand of practical application.However,these outstanding results were generally achieved with donor-acceptor(D-A) type copolymer donors,which can hardly fulfill the low-cost largescale production due to their complicated synthesis processes.Therefore,developing polymer donors with simple chemical structures is urgent for realizing low-cost OSCs.Polythiophene(PT) derivatives are currently regarded as promising candidates for such kind of donor materials,which has been illustrated in many works.In this work,two new alkylthio substituted PT derivatives,P301 and P302,were synthesized and tested as donors in the OSCs using Y5 as the accepto r.In comparison,the introduction of fluorine atoms on the backbone of P302 can not only downshift the energy levels,but also greatly improve the phase separation morphologies of the active layers,which is ascribed to the enhanced aggregation effect and the reduced miscibility with the non-fullerene acceptor.As a result,the P302:Y5-based OSC exhibits a significantly improved PCE of 9.65% than that of P301:Y5-based one,indicating the important role of fluorination in the construction of efficient PT derivative donors.     

Effect of additives on the photovoltaic properties of organic solar cells based on triphenylamine-containing amorphous molecules

Photovoltaic performance of the organic solar cells(OSCs)based on 2-((5′-(4-((4-((E)-2-(5′-(2,2-dicyanovinyl)-3′,4-dihexyl-2,2′-bithiophen-5-yl)vinyl)phenyl)(phenyl)amino)styryl)-4,4′-dihexyl-2,2′-bithiophen-5-yl)methylene)malononitrile(L(TPAbTV-DCN))as donor and PC70BM as acceptor was optimized using 0.25 vol%high boiling point solvent additive of1-chloronaphthalene(CN),1,6-hexanedithiol(HDT),or 1,8-diodooctane(DIO).The optimized OSC based on L(TPA-bTVDCN)–PC70BM(1:2,w/w)with 0.25 vol%CN exhibits an enhanced power conversion efficiency(PCE)of 2.61%,with Voc of0.87 V,Jsc of 6.95 mA/cm2,and FF of 43.2%,under the illumination of 100 mW/cm2 AM 1.5 G simulated solar light,whereas the PCE of the OSC based on the same active layer without additive is only 1.79%.The effect of the additive on absorption spectra and the atomic force microscopy images of L(TPA-bTV-DCN)–PC70BM blend films were further investigated.The improved efficiency of the device could be ascribed to the enhanced absorption and optimized domain size in the L(TPA-bTV-DCN)–PC70BM blend film.     

Manipulating active layer morphology of molecular donor/polymer acceptor based organic solar cells through ternary blends

The development of molecular donor/polymer acceptor blend(MD/PA)-type organic solar cells(OSCs) lags far behind other type OSCs. It is due to the large-size phase separation morphology of MD/PAblend, which results from the high crystallinity of molecular donors. In this article, to suppress the crystallinity of molecular donors, we use ternary blends to develop OSCs based on one polymer acceptor(P-BNBP-f BT) and two molecular donors(DR3 TBDTT and BTR) with similar chemical structures.The ternary OSC exhibits a power conversion efficiency(PCE) of 4.85%, which is higher than those of the binary OSCs(PCE=3.60% or 3.86%). To our best knowledge, it is the first report of ternary MD/PA-type OSCs and this PCE is among the highest for MD/PA-type OSCs reported so far. Compared with the binary blends, the ternary blend exhibits decreased crystalline size and improved face-on orientation of the donors. As a result, the ternary blend exhibits improved and balanced charge mobilities, suppressed charge recombination and increased donor/acceptor interfacial areas, which leads to the higher shortcircuit current density. These results suggest that using ternary blend is an effective strategy to manipulate active layer morphology and enhance photovoltaic performance of MD/PA-type OSCs.     

Fine-tuning HOMO energy levels between PM6 and PBDB-T polymer donors via ternary copolymerization

To achieve high-efficiency polymer solar cells(PSCs), it is not only important to develop high-performance small molecule acceptors(SMAs) but also to find a matching polymer donor to achieve optimal morphology and matching electronic properties.Currently, state-of-the-art SMAs mostly rely on a donor polymer named PM6. However, as the family of SMAs continues to expend, PM6 may not be the perfect polymer donor due to the requirement of energy level matching. In this work, we tune the energy level of PM6 via the strategy of ternary copolymerization. We achieve two donor polymers(named PL-1 and PL-2) with upshifted HOMO(the highest occupied molecular orbital) energy level(compared with PM6), and can thus match with the SMAs with upshifted HOMO energy levels compared with Y6. These two copolymers exhibit slightly higher order of molecular packing and similar charge transport properties, which demonstrate that the method of ternary copolymerization can fine tune the HOMO level of donor polymers, while the morphology and mobility of the blend film remain mostly unaffected. Among them,the best device based on PL-1:Y6 exhibits power conversion efficiencies(PCEs) of 16.37% with lower open circuit voltage(Voc)but higher short circuit current voltage(Jsc) and fill factor(FF) than that of the device based on PM6:Y6. This work provides an effective approach to find polymer matches for the SMAs with upshifted HOMO levels.