Thermal reactions involving solids: a personal view of selected features of decompositions,thermal analysis and heterogeneous catalysis

Journal of Thermal Analysis and Calorimetry - Nylon 11/CaCu3Ti4O12 (CCTO) nanocomposites were prepared via solution casting method followed by vacuum drying and characterized using X-ray...     

Gas phase metal cluster model systems for heterogeneous catalysis

Since the advent of intense cluster sources, physical and chemical properties of isolated metal clusters are an active field of research. In particular, gas phase metal clusters represent ideal model systems to gain molecular level insight into the energetics and kinetics of metal-mediated catalytic reactions. Here we summarize experimental reactivity studies as well as investigations of thermal catalytic reaction cycles on small gas phase metal clusters, mostly in relation to the surprising catalytic activity of nanoscale gold particles. A particular emphasis is put on the importance of conceptual insights gained through the study of gas phase model systems. Based on these concepts future perspectives are formulated in terms of variation and optimization of catalytic materials e.g. by utilization of bimetals and metal oxides. Furthermore, the future potential of bio-inspired catalytic material systems are highlighted and technical developments are discussed.     

Monolithic systems: from separation science to heterogeneous catalysis

Recent results that have been obtained in the ring-opening metathesis polymerization (ROMP)-based synthesis of monolithic supports are summarized. We have elaborated a synthetic concept that allows modifying monolithic supports in a way that they can be used both for applications in separation science, for SEC and as supports for catalytically active systems. In all cases, a tailor-made microstructure was accessible due to the controlled character of the transition-metal catalyzed polymerization. Taking advantage of the “living” catalytic sites, an “in situ” functionalization was accomplished by subsequently grafting a variety of functional monomers and catalyst precursors onto the rod. Their design and use as supports for high-performance separation devices (e.g. for ds-DNA) and catalytic supports (e.g. supported Grubbs-type catalysts) is summarized.     

Bridging the pressure gap in model systems for heterogeneous catalysis with high-pressure scanning tunneling microscopy

A high-pressure scanning tunneling microscope (HP-STM) enabling imaging with atomic resolution over the entire pressure range from ultrahigh vacuum (UHV) to one bar has been developed. By means of this HP-STM we have studied the adsorption of hydrogen on Cu(110), CO on Pt(110) and Pt(111), and NO on Pd(111) at high pressures. For all of these adsorption systems we find that the adsorption structures formed at high pressures are identical to high-coverage structures formed at lower pressures and temperatures. We thus conclude that for these systems the so-called pressure gap can be bridged, i.e. the results obtained under conventional surface science conditions can be extrapolated to higher pressures. Finally, we use the HP-STM to image the CO-induced phase separation of a Au/Ni(111) surface alloy in real time, whereby demonstrating the importance of catalyst stability in the study of bimetallic systems.     

单原子催化:沟通均相催化与多相催化的桥梁（英文）

催化在现代化学工业中占据着极为重要的地位.催化剂是催化过程的核心.均相催化剂由于具有均一、孤立的活性位点,往往具有高活性与高选择性;但是分离困难限制了其实际应用.多相催化剂由于金属原子利用效率低、活性组分不均匀,活性与选择性相对较低;但其稳定易分离的特点使得目前大多数工业催化过程都是多相催化过程.近年来,单原子催化逐渐成为催化领域新的研究热点与前沿,受到相关研究人员的广泛关注.作为一种多相催化剂,单原子催化剂具有稳定易分离的优势.此外,单原子催化剂具有类似均相催化剂的孤立活性位点,可能具有高活性与高选择.因此单原子催化的概念一经提出,便被认为有望成为架起多相催化与均相催化的桥梁;但几年来并未从实验上得到证实.2016年开始,逐渐有单原子催化剂在经典均相催化反应过程中的应用报道,为该观点提供了实验上的证据.本综述概述了2016至2017年单原子催化剂在典型均相催化反应中的成功应用,包括:1)氢甲酰化反应.以烯烃和合成气为原料合成精细化学品醛类化合物的氢甲酰化反应是目前化工生产中典型的均相催化反应之一.2016年,张涛课题组和曾杰课题组先后报道了Rh/ZnO和Rh/CoO单原子催化剂在该反应中的成功应用.催化剂都表现出优异的催化性能,活性与经典均相Wilkinson’s催化剂相当;2)氢硅加成反应.作为合成有机硅产品的重要反应之一,工业上硅氢加成反应主要由Pt基均相催化剂催化.2016年Beller课题组首次报道了将Pt/Al_2O_3单原子催化剂用于烯烃硅氢加成反应中.该催化剂除表现出良好的催化活性和区域选择性外,还具有较高的稳定性和底物普适性;3)C–H键选择性氧化.烷烃部分氧化反应在学术研究和工业应用方面都有重要意义.刘文刚等将M-N-C单原子催化剂(其中M为Fe,Co等金属)成功应用于C–H键的活化反应中,并对催化剂的结构进行了深入剖析.以上实例表明通过调控金属与载体组合、设计开发合适的单原子催化剂,可以达到结合均相催化高活性、高选择性与多相催化稳定易分离的目的,为均相催化多相化提供了一条新途径,也证明单原子催化可望成为沟通均相催化与多相催化的桥梁.     

Model studies in heterogeneous catalysis at the microscopic level: from the structure and composition of surfaces to reaction kinetics

Heterogeneous catalysis is one of the fields of modern technology, in which a characterization of structural and chemical properties of solid surfaces at the microscopic level is of enormous importance. For a long time, such insights have been precluded by the complexity of most catalytically active materials. Recently, substantial progress has been made, however, toward a microscopic-level understanding of complex catalyst surfaces. We discuss the driving factors for these advancements, which are based on the development of new well-defined model systems as well as on advances in experimental technology and theory. Scrutinizing the example of planar model catalysts, we identify the process of linking structural and chemical information to microscopic reaction kinetics as a particular challenging aspect of today’s work. We review the kinetic effects which may have an influence on the reaction kinetics on complex surfaces. As an example how structural and kinetic information can be correlated at the microscopic level we discuss the case of surface oxidation and oxygen induced restructuring of Pd nanoparticles as studied by molecular beam methods.     

The triggering of catalysis via structural engineering at atomic level: Direct propane dehydrogenation on Fe-N3P-C

The on-purpose direct propane dehydrogenation (PDH) has received extensive attention to meet the ever-increasing demand of propylene. In this work, by means of density functional theory (DFT) calculations, we systematically studied the intrinsic coordinating effect of Fe single-atom catalysts in PDH. Interestingly, the N and P dual-coordinated single Fe (Fe-N₃P-C) significantly outperform the Fe-N₄C site in catalysis and exhibit desired activity and selectivity at industrial PDH temperatures. The mechanistic origin of different performance on Fe-N₃P-C and Fe-N₄C has been ascribed to the geometric effect. To be specific, the in-plane configuration of Fe-N₄ site exhibits low H affinity, which results in poor activity in CH bond activations. By contrast, the out-of-plane structure of Fe-N₃P-C site exhibits moderate H affinity, which not only promote the CH bond scission but also offer a platform for obtaining appropriate H diffusion rate which ensures the high selectivity of propylene and the regeneration of catalysts. This work demonstrates promising applications of dual-coordinated single-atom catalysts for highly selective propane dehydrogenation.     

Mechanisms of heterogeneous crystal growth in atomic systems: insights from computer simulations

In this paper we analyze the atomic-level structure of solid/liquid interfaces of Lennard-Jones fcc systems. The 001, 011, and 111 faces are examined during steady-state growth and melting of these crystals. The mechanisms of crystallization and melting are explored using averaged configurations generated during these steady-state runs, where subsequent tagging and labeling of particles at the interface provide many insights into the detailed atomic behavior at the freezing and melting interfaces. The interfaces are generally found to be rough and we observe the structure of freezing and melting interfaces to be very similar. Large structural fluctuations with solidlike and liquidlike characteristics are apparent in both the freezing and melting interfaces. The behavior at the interface observed under either growth or melting conditions reflects a competition between ordering and disordering processes. In addition, we observe atom hopping that imparts liquidlike characteristics to the solid side of the interfaces for all three crystal faces. Solid order is observed to extend as rough, three-dimensional protuberances through the interface, particularly for the 001 and 011 faces. We are also able to reconcile our different measures for the interfacial width and address the onset of asymmetry in the growth rates at high rates of crystal growth/melting.     

A short history of chemometrics: a personal view

This article traces chemometrics back to its origins in scientific computing in the 1960s. Its development is compared in other computational disciplines such as bioinformatics. The change in geographical origins of papers published in the core chemometrics literature is discussed. It is concluded that the level of core activities in this area has hardly changed over several decades, whilst there has been a significant expansion in non‐expert users of packages over this period. It is estimated that around 2% of people encountering chemometrics in their research can be considered real experts. The problems of non‐experts using chemometrics methods with limited knowledge of the statistical fundamentals are explored. The contrasting development of chemometrics compared with, for example, computational chemistry and bioinformatics, is interpreted in terms of the changing financial pressures on research over its key developmental phase, as illustrated by the change in academic finance in the UK over the past 50 years. Copyright © 2014 John Wiley & Sons, Ltd.     

The future tasks of electrochemistry: a personal view

Journal of Solid State Electrochemistry -     

Acid-base bifunctional and dielectric outer-sphere effects in heterogeneous catalysis: a comparative investigation of model primary amine catalysts

Dielectric and acid-base bifunctional effects are elucidated in heterogeneous aminocatalysis using a synthetic strategy based on bulk silica imprinting. Acid-base cooperativity between silanols and amines yields a bifunctional catalyst for the Henry reaction that forms alpha,beta-unsaturated product via quasi-equilibrated iminium intermediate. Solid-state UV/vis spectroscopy of catalyst materials treated with salicylaldehyde demonstrates zwitterionic iminium ion to be the thermodynamically preferred product in the bifunctional catalyst. This product is observed to a much lesser extent relative to its neutral imine tautomer in primary amine catalysts having outer-sphere silanols partially replaced by aprotic functional groups. One of these primary amine catalysts, consisting of a polar outer-sphere environment derived from cyano-terminated capping groups, has activity comparable to that of the bifunctional catalyst in the Henry reaction, but instead forms the beta-nitro alcohol product in high selectivity (approximately 99%). This appears to be the first observation of selective alcohol formation in primary amine catalysis of the Henry reaction. A primary amine catalyst with a methyl-terminated outer-sphere also produces alcohol, albeit at a rate that is 50-fold slower than the cyano-terminated catalyst, demonstrating that outer-sphere dielectric constant affects catalyst activity. We further investigate the importance of organizational effects in enabling acid-base cooperativity within the context of bifunctional catalysis, and the unique role of the solid surface as a macroscopic ligand to impose this cooperativity. Our results unequivocally demonstrate that reaction mechanism and product selectivity in heterogeneous aminocatalysis are critically dependent on the outer-sphere environment.     

Indications for a surface temperature excess in heterogeneous catalysis

We explored the surface temperature excess DeltaT = T(r) - T(m) (real reaction temperature T(r), measured catalyst temperature T(m)) on the basis of experimental data, a gradually curved Arrhenius plot for CO oxidation reactions over Pd/gamma-Al(2)O(3) catalysts. Such a plot could be an indication of the surface temperature excess in the 2-dimensional reaction surfaces of catalysts. The positive or negative surface temperature excess could be developed to be a general explanation for a gradually curved Arrhenius plot of a gas-solid catalytic system. This is a new insight into solving the puzzle on such common phenomena in heterogeneous catalysis. By using the reciprocal of the real reaction temperature T(r) in the hypothetical 2-D reaction surface, instead of the experimentally determined catalyst temperature T(m) or the gas temperature T(g), the gradually curved Arrhenius plot becomes linear. We investigated the implications of such a difference among T(r), T(m), and T(g). The surface temperature excess could be the effect of coupling between the fluxes of a chemical reaction and heat transport in the 2-D reaction surface. Its order of magnitude is 10 K for the present model system.(1) The surface temperature excess increases exponentially with the reaction temperature.     

Utilization of the three-dimensional volcano surface to understand the chemistry of multiphase systems in heterogeneous catalysis

CO hydrogenation is used as a model system to understand why multiphase catalysts are chemically important in heterogeneous catalysis. By including both adsorption and subsequent surface reactions, kinetic equations are derived with two fundamental properties, the chemisorption energies of C and O (DeltaHC and DeltaHO, respectively). By plotting the activity against DeltaHC and DeltaHO, a 3-D volcano surface is obtained. Because of the constraint between DeltaHC and DeltaHO on monophase systems, a maximum can be achieved. However, if multiphase systems are used, such a constraint can be released and the global maximum may be achieved.     

A view of uncertainty at the bench analytical level

 The problem with which analytical laboratories are confronted, after traceability of their results has been demonstrated, is correctly estimating their uncertainty– to which traceability is also to some extent subject. While the general principles for calculating the uncertainty of physical measurements are applicable to chemical metrology, some refinements are needed, especially careful selection and planning the level at which uncertainty will be estimated by each laboratory in accordance with its capacity and required demands. Depending on the particular decision to be made, the mechanism to be used to estimate the uncertainty varies markedly; also, the rigour of the estimation increases with increasing stringency of the demands. This paper describes the primary sources of uncertainty in chemical metrology and discusses different approaches to its estimation in relation to the type of analytical laboratory concerned. The view presented tries to be close to the bench analytical level, in order to be practical and flexible for laboratories, although it could sometimes be considered slightly heterodox. Received: 25 March 1997 · Accepted: 20 September 1997     

Light at the interface: the potential of attenuated total reflection infrared spectroscopy for understanding heterogeneous catalysis in water

IR spectroscopy has been an important tool for studying detailed interactions of reactants and reaction-intermediates with catalyst surfaces. Studying reactions in water is, however, far from trivial, due to the excessive absorption of infrared light by water. One way to deal with this is the use of Attenuated Total Reflection spectroscopy (ATR-IR) minimizing the path length of infrared light through the water. Moreover, ATR-IR allows for a direct comparison of reactions in gas and water on the same sample, which bridges the gap between separate catalyst investigations in gas and liquid phase. This tutorial review describes recent progress in using ATR-IR for studying heterogeneous catalysts in water. An overview is given of the important aspects to be taken into account when using ATR-IR to study heterogeneous catalysts in liquid phase, like the procedure to prepare stable catalyst layers on the internal reflection element. As a case study, CO adsorption and oxidation on noble metal catalysts is investigated with ATR-IR in gas and water. The results show a large effect of water and pH on the adsorption and oxidation of CO on Pt/Al(2)O(3) and Pd/Al(2)O(3). From the results it is concluded that water affects the metal particle potential as well as the adsorbed CO molecule directly, resulting in higher oxidation rates in water compared to gas phase. Moreover, also pH influences the metal particle potential with a clear effect on the observed oxidation rates. Finally, the future outlook illustrates that ATR-IR spectroscopy holds great promise in the field of liquid phase heterogeneous catalysis.     

Molecular heterogeneous catalysis: a single-site zeolite-supported rhodium complex for acetylene cyclotrimerization

By anchoring metal complexes to supports, researchers have attempted to combine the high activity and selectivity of molecular homogeneous catalysis with the ease of separation and lack of corrosion of heterogeneous catalysis. However, the intrinsic nonuniformity of supports has limited attempts to make supported catalysts truly uniform. We report the synthesis and performance of such a catalyst, made from [Rh(C(2)H(4))(2)(CH(3)COCHCOCH(3))] and a crystalline support, dealuminated Y zeolite, giving {Rh(C(2)H(4))(2)} groups anchored by bonds to two zeolite oxygen ions, with the structure determined by extended X-ray absorption fine structure (EXAFS) spectroscopy and the uniformity of the supported complex demonstrated by (13)C NMR spectroscopy. When the ethylene ligands are replaced by acetylene, catalytic cyclotrimerization to benzene ensues. Characterizing the working catalyst, we observed evidence of intermediates in the catalytic cycle by NMR spectroscopy. Calculations at the level of density functional theory confirmed the structure of the as-synthesized supported metal complex determined by EXAFS spectroscopy. With this structure as an anchor, we used the computational results to elucidate the catalytic cycle (including transition states), finding results in agreement with the NMR spectra.