钙钛矿材料光催化还原CO2综述

利用半导体材料光催化还原CO2合成可燃物是目前解决能源危机和缓解温室效应的理想途径.本文对几种钙钛矿型材料,包括纯无机卤化物钙钛矿材料、金属有机钙钛矿材料、氧化物型钙钛矿材料和复合型钙钛矿材料在光催化还原CO2领域的应用进行了简单的归纳与总结.     

界面钝化策略:提高钙钛矿太阳能电池的稳定性

近年来,新兴起的有机无机杂化钙钛矿太阳能电池突飞猛进,在短短十年里其光电转化效率从3.8%迅速发展到目前25.2%的认证效率,被视为最具有应用潜力的新型高效率太阳能电池之一。虽然钙钛矿太阳能电池具有很高的光电转换效率已与多晶硅薄膜电池相媲美,但是电池的长期稳定性仍是阻碍其商业化的一大挑战。钙钛矿表面和晶界存在大量的缺陷,界面钝化来提高钙钛矿太阳能电池的稳定性是非常重要且有效的策略。二维钙钛矿材料是有机胺层与无机层交替的层状钙钛矿,具有体积较大的有机铵阳离子,与传统的三维钙钛矿材料相比对于环境的稳定性较好,并且结构灵活可调,在三维钙钛矿表面修饰二维钙钛矿层钝化缺陷,在提高钙钛矿太阳能电池效率的同时又保证了稳定性,另外,合适的钝化剂分子也能够非常有效地钝化缺陷。本文总结了钙钛矿太阳能电池的不稳定因素,归纳了钙钛矿太阳能电池界面钝化方面的研究进展,指出了二维钙钛矿材料发展的巨大潜力以及寻找合适钝化剂分子的原则,期望能够为获得高性能的钙钛矿太阳能电池进而实现商业化提供有益的指导。     

An Efficient and Stable Perovskite Solar Cell with Suppressed Defects by Employing Dithizone as a Lead Indicator

The defects in perovskite films are one of the most non-negligible factors that can attenuate the performances of perovskite solar cell. This work fabricates defect-reduced perovskite film by using the lead indicator (dithizone) as an additive of perovskite functional layer. The dithizone can retard the crystallization rate of perovskite films, passivate the defects, and enhance the structure stability of perovskite by coordinating with lead atoms. As a result, the device doped with dithizone yields outstanding power conversion efficiency and stability.     

钙钛矿太阳能电池中吸收层的研究进展

钙钛矿太阳能电池因具有成本低、制备容易和光电性能优异等突出特点受到了广泛关注.钙钛矿太阳能电池能量转化效率已从2009年的3.8%提升到2019年的25.2%.我们在文中重点总结了钙钛矿电池吸收层的制备工艺,掺杂和晶体组成、结构调控方面取得的重要进展,以及这些突破对电池效率提高的贡献,同时也提出了钙钛矿太阳能电池发展仍需要解决的问题.     

铋基钙钛矿(CH3NH3)3Bi2I9薄膜的制备及在光伏电池中的应用

铋基钙钛矿由于稳定性强及毒性低,被认为是未来极具发展潜力的环保型钙钛矿材料。(CH₃NH₃)₃Bi₂I₉(MBI)因具有优异的光吸收性能而引起人们的普遍关注。本文介绍了MBI钙钛矿晶体的结构及性能,总结了其薄膜的制备方法,并重点叙述了不同方法制备的MBI钙钛矿薄膜在光伏电池中的应用情况。MBI钙钛矿与铅基钙钛矿的效率相比还有很大差距,如何提高其光电转换效率仍是今后研究的主要方向。     

高效钙钛矿太阳能电池吸光层的设计与优化

本文设计了多元混合钙钛矿吸光层涂布液配方,并采用两步法组装了钙钛矿电池器件。由于两步法制备钙钛矿吸光层存在配方和工艺相对复杂的问题,导致电池器件性能难以提升,因此,本文采用正交实验的方法,筛选出影响电池器件性能的关键因素。针对关键因素设计了系列实验,通过观察钙钛矿层薄膜形貌,测试钙钛矿太阳能电池器件的光电性能,并采用多种表征手段研究了钙钛矿层薄膜性质,确定了关键因素的添加量,最后优选出钙钛矿电池吸光层的最佳配方,得到高质量的钙钛矿薄膜,电池的光电转换效率达到21.1%。     

Multiple-quantum-well perovskite for hole-transport-layer-free light-emitting diodes

We demonstrate hole-transport-layer-free light-emitting diodes(LEDs) based on solution-processed multiple-quantum-well(MQW) perovskite. The MQW perovskite can self-assemble to a unique structure of vertically graded distribution with two-dimensional layered perovskite covered by three-dimensionallike perovskite at top, which can naturally form a barrier of electron transporting to the anode interface,thereby enhancing the charge capture efficiency. This leads to hole-transport-layer-free MQW per...     

钙钛矿型太阳电池研究进展

自从2009年钙钛矿材料被应用到太阳电池领域,到现在仅6年的时间里,钙钛矿型太阳电池的光伏转换效率从约3%提高到20.1%,受到全球瞩目。 本文对近年来钙钛矿型太阳电池的发展进行了综述,介绍了钙钛矿吸光材料的性能及其制备,总结了钙钛矿型太阳电池器件结构及其内在机理,探讨了该类型电池待突破的方向和可能的解决途径,阐述了钙钛矿型太阳电池的进展历程,展望了未来发展方向。     

Chitosan‐Assisted Crystallization and Film Forming of Perovskite Crystals through Biomineralization

Biomimetic mineralization is a powerful approach for the synthesis of advanced composite materials with hierarchical organization and controlled structure. Herein, chitosan was introduced into a perovskite precursor solution as a biopolymer additive to control the crystallization and to improve the morphology and film‐forming properties of a perovskite film by way of biomineralization. The biopolymer additive was able to control the size and morphology of the perovskite crystals and helped to form smooth films. The mechanism of chitosan‐mediated nucleation and growth of the perovskite crystals was explored. As a possible application, the chitosan–perovskite composite film was introduced into a planar heterojunction solar cell and increased power conversion efficiency relative to that observed for the pristine perovskite film was achieved. The biomimetic mineralization method proposed in this study provides an alternative way of preparing perovskite crystals with well‐controlled morphology and properties and extends the applications of perovskite crystals in photoelectronic fields, including planar‐heterojunction solar cells.     

金属卤化物钙钛矿纳米晶高效发光二极管的制备与器件性能优化

金属卤化物钙钛矿作为一类新型的离子型直接带隙半导体材料在电致发光二极管(LED)中有着重要应用前景. 但实现其应用的前提在于金属卤化物钙钛矿材料需要保持高的发光效率和好的稳定性. 为了提高金属卤化物钙钛矿作为LED发光层的激子结合效率, 从而提升其发光效率, 设计和合成金属卤化物钙钛矿纳米晶材料是一个有效途径. 目前, 基于纳米晶材料设计的金属卤化物钙钛矿LED在绿光和红光(包括近红外光)范围已经展现了高的发光亮度和外量子效率(EQE), 其中最高EQE已经超过了20%, 但其稳定性仍无法满足器件应用的要求. 此外, 更值得关注且更重要的是, 蓝光钙钛矿LED的发光亮度和EQE目前仍然不高. 如何制备高效、 稳定的金属卤化物钙钛矿纳米晶LED, 特别是蓝光LED, 是一个具有重大应用前景且具有挑战性的课题. 本文重点介绍了金属卤化物钙钛矿纳米发光层的结构设计和合成方法及金属卤化物钙钛矿LED的研究进展, 分析了金属卤化物钙钛矿LED不稳定的原因, 并对金属卤化物钙钛矿LED研究面临的挑战和未来发展方向进行了总结与展望.     

Fast-growing procedure for perovskite films in planar heterojunction perovskite solar cells

A fast-growing procedure (FGP) to fabricate perovskite films with large grain sizes is described in this article. In the FGP method, the perovskite precursor solution is coated onto the substrates at a temperature of ~240 ℃. The solvent in the precursor solution evaporates quickly in about 2 s, resulting in the rapid formation of a perovskite film without further annealing process. Millimeter-scale perovskite grain clusters are obtained in the film. Based on such perovskite films, fabricated planar heterojunction perovskite solar cells give a power conversion efficiency (PCE) above 8%.     

Self-assembly of porphyrins on perovskite film for blade-coating stable large-area methylammonium-free solar cells

Phase transition and phase separation of formamidinium-cesium (FA-Cs) perovskite during the fabrication and operation processes reduce the efficiency and stability of perovskite solar cells (PSCs). Here, we develop an in situ molecular self-assembly approach on perovskite surface using an amine nickel porphyrin (NiP). The NiP doped perovskite precursor solution was deposited on substrate by blade-coating under ambient condition. NiP molecules self-assemble into supramolecule bound on perovskite surface during the vacuum-assisted process. Such a modification controls the perovskite grain growth to generate the uniform perovskite film. The supramolecule can release the residual lattice strain to inhibit the phase transition of perovskite film, and promote the charge extraction and transport to suppress the phase separation of FA-Cs perovskite during long-term illumination condition. Consequently, the best efficiency of large-area NiP-based FA-Cs-PSCs with the active area of 1.0 cm² is up to 20.3% (certified as 19.2%), which is close to the record efficiency (20.37%) by blade-coating. Unencapsulated NiP-doped device reveals the remarkably improved overall stabilities. This work affords a novel way to address the phase transition and phase separation in FA-Cs perovskite.     

Functional Metal Oxides in Perovskite Solar Cells

As extremely important inorganic materials, metal oxides play an irreplaceable role in solid perovskite solar cells. In this review, the preparation methods of metal oxides, their effects on the perovskite optoelectronic devices incorporated with the energy level compatibility of perovskite materials are provided. Finally, the possible reactions between interfaces during growth progress as well as passivation mechanism of some metal oxides to perovskite materials are discussed. The physical, chemical, and electrical properties of functional metal oxides endow the enhancement of the efficiency and stability of perovskite photovoltaic devices.     

离子液体对钙钛矿太阳能电池性能的影响

利用1-乙基-3-甲基咪唑溴盐(EMIMBr)、1-己基-3-甲基咪唑溴盐(HMIMBr)、双三氟甲烷磺酰亚胺锂(LiTFSI)以及1-乙基-3-甲基咪唑氯盐(EMICl)和双氟磺酰亚胺钾(KFSI)制备了1-乙基-3-甲基咪唑双三氟甲磺酰亚胺盐(EMITFSI)、1-己基-3-甲基咪唑双三氟甲磺酰亚胺盐(HMITFSI)和1-乙基-3-甲基咪唑鎓二(氟甲磺酰基)亚胺盐(EMIFSI)3种离子液体。 用氯苯稀释的离子液体对钙钛矿活性层进行浸泡处理,探究了离子液体对钙钛矿形貌以及钙钛矿太阳能电池性能的影响。 结果表明,HMITFSI处理后太阳能电池的填充因子从0.71提高到了0.74,光电转换效率也有了一定提高,钙钛矿薄膜的表面形貌得到了改善,而EMITFSI和EMIFSI的处理反而降低了钙钛矿太阳能电池的性能,证实离子液体可以影响钙钛矿的结晶形貌。     

Supersaturation controlled growth of MAFAPbI<Subscript>3</Subscript> perovskite film for high efficiency solar cells

Controlling the nucleation and growth of organic-inorganic hybrids perovskite is of key importance to improve the morphology and crystallinity of perovskite films. However, the growth mechanism of perovskite films based on classical crystallization theory is not fully understood. Here, we develop a supersaturation controlled strategy (SCS) to balance the nucleation and crystal growth speeds. By this strategy, we are able to find an ideal supersaturation region to realize a balance of nucleation and crystal growth, which yields highly crystallized perovskite films with micrometer-scale grains. Besides, we provide a thoughtful analysis of nucleation and growth based on the fabrication of the perovskite films. As a result, the highest photovoltaic power conversion efficiencies (PCE) of 19.70% and 20.31% are obtained for the planar and the meso-superstructured devices, respectively. This strategy sheds some light for understanding the film growth mechanism of high quality perovskite film, and it provides a facile strategy to fabricate high efficiency perovskite solar cells.     

Supersaturation controlled growth of MAFAPbI_3 perovskite film for high efficiency solar cells

Controlling the nucleation and growth of organic-inorganic hybrids perovskite is of key importance to improve the morphology and crystallinity of perovskite films. However, the growth mechanism of perovskite films based on classical crystallization theory is not fully understood. Here, we develop a supersaturation controlled strategy(SCS) to balance the nucleation and crystal growth speeds. By this strategy, we are able to find an ideal supersaturation region to realize a balance of nucleation and crystal growth, which yields highly crystallized perovskite films with micrometer-scale grains. Besides, we provide a thoughtful analysis of nucleation and growth based on the fabrication of the perovskite films. As a result, the highest photovoltaic power conversion efficiencies(PCE) of 19.70% and 20.31% are obtained for the planar and the meso-superstructured devices, respectively. This strategy sheds some light for understanding the film growth mechanism of high quality perovskite film, and it provides a facile strategy to fabricate high efficiency perovskite solar cells.     

钙钛矿型太阳能电池制备工艺及稳定性研究进展

有机-无机杂化钙钛矿型太阳能电池因其简单的制备工艺,低廉的制造成本,优异的光电转换效率,成为光伏领域的研究热点。钙钛矿光吸收材料具有消光系数高、载流子迁移率高、载流子寿命长、带隙可调控等优点。短短几年内,钙钛矿型太阳能电池的效率从最初的3.8%提高到22.1%。目前,为了获得稳定高效的钙钛矿型太阳能电池,主要有以下几个研究思路：新型器件结构设计;结构功能层的材料形貌设计;结构各功能层间的界面修饰;空穴传输材料的选择;对电极的选择。本文通过文献综述,在回顾了国内外研究者对钙钛矿型太阳能电池的研究历程的基础上,介绍了钙钛矿型太阳能电池的结构和工作原理,重点总结了电子传输层和钙钛矿层的制备工艺及优化,并讨论了钙钛矿型太阳能电池的稳定性以及展望了其商业化的前景。     

Two-Second-Annealed 2D/3D Perovskite Films with Graded Energy Funnels and Toughened Heterointerfaces for Efficient and Durable Solar Cells

The 2D/3D perovskite heterostructures have been widely investigated to enhance the efficiency and stability of perovskite solar cells (PSCs). However, rational manipulation of phase distribution and energy level alignment in such 2D/3D perovskite hybrids are still of great challenge. Herein, we successfully achieved spontaneous phase alignment of 2D/3D perovskite heterostructures by concurrently introducing both 2D perovskite component and organic halide additive. The graded phase distribution of 2D perovskites with different n values and 3D perovskites induced favorable energy band alignment across the perovskite film and boosted the charge transfer at the relevant heterointerfaces. Moreover, the 2D perovskite component also acted as a “band-aid” to simultaneously passivate the defects and release the residual tensile stress of perovskite films. Encouragingly, the blade-coated PSCs based on only ≈2 s in-situ fast annealed 2D/3D perovskite films with favorable energy funnels and toughened heterointerfaces achieved promising efficiencies of 22.5 %, accompanied by extended lifespan. To our knowledge, this is the highest reported efficiency for the PSCs fabricated with energy-saved thermal treatment just within a few seconds, which also outperformed those state-of-the-art annealing-free analogues. Such a two-second-in-situ-annealing technique could save the energy cost by up to 99.6 % during device fabrication, which will grant its low-coast implementation.     

Rational Design of Ferroelectric 2D Perovskite for Improving the Efficiency of Flexible Perovskite Solar Cells Over 23 %

Despite the great progress of flexible perovskite solar cells (f-PSCs), it still faces several challenges during the homogeneous fabrication of high-quality perovskite thin films, and overcoming the insufficient exciton dissociation. To the ends, we rationally design the ferroelectric two-dimensional (2D) perovskite based on pyridine heterocyclic ring as the organic interlayer. We uncover that incorporation of the ferroelectric 2D material into 3D perovskite induces an increased built-in electric field (BEF), which enhances the exciton dissociation efficiency in the device. Moreover, the 2D seeds could assist the 3D crystallization by forming more homogeneous and highly-oriented perovskite crystals. As a result, an impressive power conversion efficiency (PCE) over 23 % has been achieved by the f-PSCs with outstanding ambient stability. Moreover, the piezo/ferroelectric 2D perovskite intrigues a decreased hole transport barriers at the ITO/perovskite interface under tensile stress, which opens new possibilities for developing highly-efficient f-PSCs.     

钙钛矿型太阳能电池制备工艺及稳定性研究进展

有机-无机杂化钙钛矿型太阳能电池因其简单的制备工艺,低廉的制造成本,优异的光电转换效率,成为光伏领域的研究热点。钙钛矿光吸收材料具有消光系数高、载流子迁移率高、载流子寿命长、带隙可调控等优点。短短几年内,钙钛矿型太阳能电池的效率从最初的3.8%提高到22.1%。目前,为了获得稳定高效的钙钛矿型太阳能电池,主要有以下几个研究思路:新型器件结构设计;结构功能层的材料形貌设计;结构各功能层间的界面修饰;空穴传输材料的选择;对电极的选择。本文通过文献综述,在回顾了国内外研究者对钙钛矿型太阳能电池的研究历程的基础上,介绍了钙钛矿型太阳能电池的结构和工作原理,重点总结了电子传输层和钙钛矿层的制备工艺及优化,并讨论了钙钛矿型太阳能电池的稳定性以及展望了其商业化的前景。