The hydrogenation of olefins using a polymer supported ruthenium complex

RuCl₂(PPH₃)3 has been attached to a phosphinated polymer support (phosphinated polystyrene crosslinked with 2% divinylbenzene) and the reagent converted to the polymer supported analogue of RuClH(PPH₃)₃ in the presence of base. The polymer supported catalyst efficiently hydrogenates terminal olefins under ambient conditions. Hydrogenation of 1-hexene has revealed that the reaction rate is proportional to [Ru], [H₂] and [olefin]/(1 + [olefin]). The polymer support environment allows for selectivity in olefin hydrogenation and under suitable reaction conditions short chain terminal olefins are hydrogenated more rapidly than long chain terminal olefins. The extent of metal loading on the polymer and the reaction solvent composition also influence the reaction selectivity and these effects are discussed.     

Synthesis, characterization and olefin/CO exchange reactions of pyrazolylborato complexes of copper(I)

New bis(pyrazolyl)borato olefin complexes of copper(I) of general formula Cu[BH2(3,5-(CF3)2Pz)2](olefin) have been prepared (olefins: coe = cyclooctene, van = 4-vinylanisole, clsty = 4-chlorostyrene, tevs = triethylvinylsilane, fn = fumaronitrile). The structures of Cu[BH2(3,5-(CF3)2Pz)2](L), L = coe, van, tevs, fn, have been determined by X-ray diffraction methods. Considering the two N atoms of the bis(pyrazolyl)borate ligand and the midpoint of the C-C double bond of the coordinated olefin, the compounds with L = coe, van and tevs contain a copper atom in a trigonal planar coordination. A coordination polymer with N-coordinated fumaronitrile and tetrahedral coordination of copper atoms is obtained in the case of L = fn. The carbonylation reactions of Cu[BH(2)(3,5-(CF3)2Pz)2](olefin) (olefin = coe, clsty, van, tevs), Cu[BH2(3,5-(CF3)2Pz)2](olefin) + CO<==>Cu[BH2(3,5-(CF3)2Pz)2](CO) + olefin, have been studied gas volumetrically and the thermodynamical parameters of the equilibria for the displacement of the coordinated olefin by carbon monoxide have been determined. These data for copper(I) are compared with those reported in the literature.     

Polymerization catalysis with transition metal amidinate and related complexes

Applications of transition metal amidinate [RC(NR′)₂], guanidinate and amidopyridine complexes to olefin coordination polymerization are reviewed. In addition, the use of complexes, featuring closely related ligands, such as phosphonamide or iminophosphonamide [R₂P(NR′)₂], in olefin polymerization is highlighted. Some of these complexes have also been investigated in the stereoregular polymerization of styrene and conjugated dienes, whereas more recent work has focused on controlled ring-opening polymerization of lactones and lactides.     

Fine‐Tuning the Reactivity and Stability by Systematic Ligand Variations in CpCoI Complexes as Catalysts for [2+2+2] Cycloaddition Reactions

CpCo^I‐olefin‐phosphite and CpCo^I‐bisphosphite complexes were systematically prepared and their reactivity in [2+2+2] cycloaddition reactions compared with highly active [CpCo(H₂C?CHSiMe₃)₂] ( 1 ). Whereas 1 is an excellent precursor for the synthesis of [CpCo(olefin)(phosphite)] complexes ( 2 a – f ), [CpCo(phosphite)₂] complexes ( 3 a – e ) were prepared photochemically from [CpCo(cod)]. The complexes were evaluated in the cyclotrimerization reaction of diynes with nitriles yielding pyridines. For [CpCo(olefin)(phosphite)], as well as some of the [CpCo(phosphite)₂] complexes, reaction temperatures as low as 50 °C were sufficient to perform the cycloaddition reaction. A direct comparison showed that the order of reactivity for the complex ligands was olefin₂>olefin/phosphite>phosphites₂. The complexes with mixed ligands favorably combine reactivity and stability. Calculations on the ligand dissociation from [CpCo(olefin)(phosphite)] proved that the phosphite is dissociating before the olefin. [CpCo(H₂C?CHSiMe₃){P(OPh)₃}] ( 2 a ) was investigated for the co‐cyclization of diynes and nitriles and found to be an efficient catalyst at rather mild temperatures.     

Catalytic cyclopropanation of methylenecyclobutanes using ethyl nitrodiazoacetate. Synthesis of spirohexane amino acids

The reaction of ethyl nitrodiazoacetate with a series of methylenecyclobutanes was studied and both [1+2]- and [2+3]-cycloaddition pathways were observed depending on olefin structure. Amino acids of a spirohexane type were synthesized from methylenecyclobutanes by a three-step synthesis.     

铱催化环加成反应的研究进展

过渡金属催化环加成反应是合成单环及多环化合物的重要方法,也是有机化学的研究热点之一.综述了近年来铱催化环加成反应的研究进展,主要包括了[2+2+1],[2+2+2],[4+2],1,3-偶极环加成反应等,及少量关于[3+2+2],[3+2],[5+1]环加成反应的报道,并讨论了部分铱催化环加成反应机理.     

Enantioselective vicinal bis-acylation of olefins

A two-step sequence for the asymmetric vicinal acylation of olefins by a [2+2+1] strategy is reported. The key reaction is a [2+2] cycloaddition of an olefin to a chiral keteniminium salt derived from N-tosylsarcosinamide. This is followed by a regioselective Baeyer-Villiger oxidation of the resulting cyclobutanone to yield a lactol derivative that is equivalent to the product of addition of a carboxyl and a carbonyl group to the olefin. N-Tosylsarcosinamides derived from prolinol methyl ether and 2,5-dimethylpyrrolidine gave the best yields and diastereoselectivities. Five- and six-membered cycloolefins only gave cis products as expected. With seven- and eight-membered rings and cis 1,2-disubstituted acyclic olefins, partial or complete epimerisation of the cis to the trans adducts was observed. Facial selectivities were generally good except for terminal olefins. The oxidation step proceeded in high yields to give crystalline compounds which could usually be obtained in enantiopure form by simple recrystallisation.     

Nickel-catalyzed

Oxabenzonorbornadienes 1 and 2 and azabenzonorbornadiene 3 undergo [2+2] cycloaddition with alkynes (PhC triple bond Ph, PhC triple bond CMe, PhC triple bond CCO2Et, PhC triple bond CCH(OEt)2, and HC triple bond C(CH2)4Me) in the presence of [Ni(PPh3)2Cl2], PPh3, and Zn powder in toluene to afford the corresponding exo-cyclobutene derivatives 4a-e, 5a-e, and 6 in fair to excellent yields. Under similar conditions. EtCO2C triple bond CCO2Et does not react with 1 in toluene to give the [2+2] cycloaddition product, but in acetonitrile, the catalytic [2+2] cycloaddition proceeds and cycloadduct 4 f is isolated in 83% yield. At high temperature, these cyclobutene derivatives readily undergo ring expansion to yield the corresponding 8-membered carbocyclic dienes. Thus, flash vacuum pyrolysis of 4a, 4d, 4f, 6, and 14 at 500 degrees C affords dienes 13a-d and 15 in 70-96% yields. This interesting ring expansion may be viewed as the insertion of an alkyne moiety into the carbon-carbon double bond of a cyclic olefin resulting in the enlargement of the ring by two carbons. Compound 13a is readily deoxygenated by TiCl4 and Zn in THF to give a cyclooctatetraene derivative 16 in 89% yield.     

Direct observation of a 14-electron ruthenacyclobutane relevant to olefin metathesis

The 14-electron ruthenium phosphonium alkylidene complex [(IH2Mes)Cl2Ru=CH(PCy3)][B(C6F5)4], 1b, a highly active olefin metathesis catalyst, reacts with stoichiometric quantities of ethylene at -50 degrees C in CD2Cl2 to generate the ruthenacyclobutane complex [(IH2Mes)Cl2RuCH2CH2CH2], 2, and [CH2=CH(PCy3)][B(C6F5)4] in quantitative yield by NMR spectroscopy. 1H and 13C NMR spectroscopies on 2 and 2-13C3 are consistent with a symmetrical C2v structure, providing the first experimental information concerning this crucial intermediate in ruthenium-mediated olefin metathesis. At -50 degrees C, exchange with free ethylene takes place on the chemical time scale. Complex 2 decomposes in solution upon warming to room temperature, generating propene and unknown ruthenium product(s).     

Dicobaltoctacarbonyl-mediated synthesis of tricyclic 5,6-diydropyran-2-one derivatives via tandem cycloaddition reaction between cis-epoxyalkynes, a tethered olefin, and carbon monoxide

Cobalt carbonyl complex Co2(CO)8 implemented an intramolecular carbonylation of cis-epoxyalkynes to generate Co2(CO)6-stabilized gamma-lactonyl allene species. For 1,1,2-trisubstituted epoxyalkynes, this Co2(CO)6-allene species reacted with a tethered olefin to give [2+2]-cycloadducts, and with CO and a tethered olefin to produce [2+2+1]-cycloadducts. These resulting cycloadducts have a 5,6-diydropyran-2-one core fused with a cyclobutane and a cyclopentanone ring, respectively. For 1,2-disubstituted cis-epoxyalkyne and 1,1,2-trisubstituted cis-epoxyalkynes bearing a heteroatom constituent, cyclization of the corresponding epoxyalkyne with a tethered alkene is invariably accompanied by incorporation of CO to produce a [2+2+1]-cycloadduct, even in the absence of CO. We have prepared various 1,1,2-trisubstituted and 1,2-disubstituted cis-epoxyalkynes to generalize such cycloaddition pathways. Attempt to use an organic promoter to perform these tandem cycloadditions was unsuccessful because of a competing Pauson-Khand reaction. Cyclization of a 1,2-disubstituted epoxyalkyne with a tethered diene was achieved successfully in one case, but the yield was low (25%).     

Titanium-mediated [2 + 2 + 2] coupling of diynes with homoallylic alcohols

[reaction: see text] In connection with the known diyne-ene [2 + 2 + 2] cycloaddition reactions mediated by titanium aryloxides, the ability of titanium alkoxides to promote coupling of a titanacyclopentadiene with an alkene has been assessed for the isomerization-free preparation of 1,3-cyclohexadienes. The successful cycloaddition by titanium alkoxides is predicated on the use of homoallylic alcohols as the olefin component. With secondary homoallylic alcohols, high 1,3-diastereoselectivity is observed, which lends itself to enantioselective preparation of functionalized 1,3-cyclohexadienes.     

A new Co(2)(CO8-mediated tandem [5 + 1]/[2 + 2 + 1]-cycloaddition reaction: a one-pot synthesis of tricyclic delta-lactones from cis-epoxy ene-ynes

In the presence of Co2(CO)8 and CO, cis-epoxyalkynes bearing a tether olefin undergo a tandem [5 + 1]/[2 + 2 + 1]-cycloaddition to give tricyclic delta-lactones efficiently in a one-pot operation. The reaction mechanism is proposed to involve a cobalt-coordinated cyclic allene species.     

Three-component cycloadditions: the first transition metal-catalyzed [5+2+1] cycloaddition reactions

Prompted by our studies of transition metal-catalyzed [4+4], [4+2], [5+2], and [6+2] cycloadditions and by the view that these two-component reactions could be intercepted by a third component of one or more atoms, a new three-component transition metal-catalyzed cycloaddition is described. This new [5+2+1] cycloaddition proceeds in good to excellent yield and with high or complete regioselectivity with a variety of carbonyl-substituted alkynes to give bicyclo[3.3.0]octenone adducts, resulting from transannular closure of the intermediate eight-membered-ring cycloadduct. Effects of concentration, temperature, pressure, and catalyst loading on the efficiency of the reaction are discussed. This process provides access to complex building blocks for synthesis based on simple, readily available components.     

Tandem catalysis: generating multiple contiguous carbon-carbon bonds through a ruthenium-catalyzed ring-closing metathesis/Kharasch addition

Tandem catalysis can offer unique and powerful strategies for converting simple starting materials into more complex products in a single reaction vessel while generating less waste and minimizing handling. In this regard, Grubbs' ruthenium alkylidene (Cy3P)2Cl2Ru=CHPh is shown to catalyze two mechanistically distinct transformations to offer a unique protocol that effects multiple bond changes in a single operation. A tandem ruthenium-catalyzed olefin ring-closing metathesis (RCM)/Kharasch addition allows for the facile preparation of bicyclic [3.3.0], [4.3.0], and [5.3.0] ring systems in one step from the appropriately functionalized acyclic precursors. For substrates where the intramolecular Kharasch addition fails, an intermolecular Kharasch addition is possible. By combining the intra- and intermolecular Kharasch additions with RCM, three new contiguous carbon-carbon bonds with multiple stereocenters can be generated by the ruthenium catalyst in a controlled fashion in one operation through two mechanistically distinct pathways.     

The cycloaddition reaction using visible light photoredox catalysis

In recent years, visible light photoredox catalysis has emerged as an important research area in synthesis. In this review, we describe the recent progress in the visible light induced cycloaddition reactions, including [2+2], [3+2], [4+2] and [2+2+2] cycloadditions, for the construction of four-, five- or six-membered cycles and polycycles. Furthermore, the mechanisms for these transformations are also discussed, in which the formation of the radicals is initiated by a visible light photoredox catalysis process.     

Opening the [4 + 2 + 2] cycloadducts of bicyclo[2.2.1]hepta-2,5-dienes (norbornadienes) to cis-fused bicyclo[5.3.0]decanes

Tetracyclo[5.4.0.0.(2,4)0(3,7)]undec-9-enes, prepared by the transition-metal-catalyzed [4 + 2 + 2] homo-Diels-Alder reactions of norbornadiene and 1,3-butadienes, can be opened using either acid-promoted or Zeise's dimer-mediated cyclopropane ring cleavage, ultimately leading to cis-fused bicyclo[5.3.0]decanes (perhydroazulenes). Stereoselective functionalization of the olefin unit in the tetracycloundecenes to an alcohol or diol prior to ring opening is tolerated by the Zeise's dimer ([Pt(C(2)H(4))Cl(2)](2)) catalyst to yield highly functionalized bicyclo[5.3.0]decanes, which form the core structure of numerous sesquiterpenes.     

Hydrogen-atom transfer in open-shell organometallic chemistry: the reactivity of Rh(II)(cod) and Ir(II)(cod) radicals

A series of new metalloradical rhodium and iridium complexes [M(II)(cod)(N-ligand)](2+) in the uncommon oxidation state +II were synthesized by one-electron oxidation of their [M(I)(cod)(N-ligand)](+) precursors (M=Rh, Ir; cod=(Z,Z)-1,5-cyclooctadiene; and N-ligand is a podal bis(pyridyl)amine ligand: N,N-bis(2-pyridylmethyl)amine (dpa), N-(2-pyridylmethyl)-N-(6-methyl-2-pyridylmethyl)amine (pla), or N-benzyl-N,N-bis(6-methyl-2-pyridylmethyl)amine (Bn-dla). EPR spectroscopy, X-ray diffraction, and DFT calculations reveal that each of these [M(II)(cod)(N-ligand)](2+) species adopts a square-pyramidal geometry with the two cod double bonds and the two pyridine fragments in the basal plane and the N(amine) donor at the apical position. The unpaired electron of these species mainly resides at the metal center, but the apical N(amine) donor also carries a considerable fraction of the total spin density (15-18 %). Density functional calculations proved a valuable tool for the analysis and simulation of the experimental EPR spectra. Whereas the M(II)(olefin) complexes are quite stable as solids, in solution they spontaneously transform into a 1:1 mixture of M(III)(allyl) species and protonated M(I)(olefin) complexes (in the forms [M(I)(olefin)(protonated N-ligand)](2+) for M=Rh and [M(III)(H)(olefin)(N-ligand)](2+) for M=Ir). Similar reactions were observed for the related propene complex [M(II)(propene)(Me(2)tpa)](2+) (Me(2)tpa=N,N,N-tris(6-methyl-2-pyridylmethyl)amine). The decomposition rate of the [M(II)(cod)(N-ligand)](2+) species decreases with increasing N-ligand bulk in the following order: dpa>pla>Bn-dla. Decomposition of the most hindered [M(II)(cod)(Bn-dla)](2+) complexes proceeds by a second-order process. The kinetic rate expression v=k(obs)[M(II)](2) in acetone with k(obs)=k'[H(+)][S], where [S] is the concentration of additional coordinating reagents (MeCN), is in agreement with ligand-assisted dissociation of one of the pyridine donors. Solvent coordination results in formation of more open, reactive species. Protonation of the noncoordinating pyridyl group increases the concentration of this species, and thus [H(+)] appears in the kinetic rate expression. The kinetic data are in agreement with bimolecular hydrogen-atom transfer from M(II)(cod) to another M(II) species (DeltaH( not equal)=11.5+/-2 kcal mol(-1), DeltaS( not equal)=-27+/-10 cal K(-1) mol(-1), and DeltaG( not equal)(298 K)=19.5+/-5 kcal mol(-1)).     

Use of water in aiding olefin/paraffin (liquid + liquid) extraction via complexation with a silver bis(trifluoromethylsulfonyl)imide salt

This paper describes the extraction of C₅–C₈ linear α-olefins from olefin/paraffin mixtures of the same carbon number via a reversible complexation with a silver salt (silver bis(trifluoromethylsulfonyl)imide, Ag[Tf₂N]) to form room temperature ionic liquids [Ag(olefin)_x][Tf₂N]. From the experimental (liquid + liquid) equilibrium data for the olefin/paraffin mixtures and Ag[Tf₂N], 1-pentene showed the best separation performance while C₇ and C₈ olefins could only be separated from the corresponding mixtures on addition of water which also improves the selectivity at lower carbon numbers like the C₅ and C₆, for example. Using infrared and Raman spectroscopy of the complex and Ag[Tf₂N] saturated by olefin, the mechanism of the extraction was found to be based on both chemical complexation and the physical solubility of the olefin in the ionic liquid ([Ag(olefin)_x][Tf₂N]). These experiments further support the use of such extraction techniques for the separation of olefins from paraffins.     

Non-metathesis reactions of ruthenium carbene catalysts and their application to the synthesis of nitrogen-containing heterocycles

Non-metathesis reactions of ruthenium carbene catalysts, such as olefin isomerization, hydrogenation, radical reaction, activation of silane, cyclopropanation, epimerization cocyclopropane, [3 + 2] cycloaddition, and cycloisomerization, are summarized. The utility of these reactions was demonstrated by the synthesis of indole using olefin isomerization and subsequent ring-closing metathesis, the synthesis of indoline using cycloisomerization, and the synthesis of the putative structure of fistulosin using cycloisomerization as a key step.