Stereoselective synthesis of anti-2-oxazolidinones by Ph3P-CCl4-Et3N mediated SN2 cyclization of N-Boc-β-amino alcohols

Ethyl anti-4-substituted phenyl-2-oxo-1,3-oxazolidine-5-carboxylates were synthesized stereoselectively in excellent yields using the Ph₃P-CCl₄-Et₃N system by S_N2 cyclization of N-Boc-β-amino alcohols. syn to anti conversion of ethyl 4-substituted phenyl-2-oxo-1,3-oxazolidine-5-carboxylates using DBU as base is also described.     

EuZn2Si2 and EuZn2Ge2 Grown from Zn or Ga(ln)/Zn Flux

Single crystals of the novel ternary compounds EuZn₂Si₂ and EuZn₂Ge₂ were grown from pure gallium, indium, or zinc metal used as a flux solvent. Crystal properties were characterized using X-ray single-crystal analyses via Gandolfi and Weissenberg film techniques and by four-circle X-ray single-crystal diffractometry. The new compounds crystallize with ternary derivative structures of BaAl₄, i.e., EuZn₂Si₂ with ThCr₂Si₂-type (a=0.42607(2) nm, c=1.03956(5) nm, I4/mmm, R₁=0.038) and EuZn₂Ge₂ with CaBe₂Ge₂-type (a=0.43095(2) nm, c=1.07926(6) nm, P4/nmm, R₁=0.067). XAS and magnetic measurements on EuZn₂Si₂ and EuZn₂Ge₂ revealed in both compounds the presence of Eu²⁺ ions carrying large magnetic moments, which order magnetically at low temperatures. The magnetic phase transition occurs at T_N=16 and 7.5 K for the silicide and the germanide, respectively. In EuZn₂Si₂ there occurs a spin reorientation at 13 K and furthermore some canting of antiferromagnetically ordered moments below about 10 K. In EuZn₂Ge₂ a canted antiferromagnetic structure is formed just at T_N.     

A simple conversion of azlactones into indenones via H3PW12O40/Al2O3 catalyzed intramolecular Friedel-Crafts reaction

A rapid and simple procedure for the synthesis of the indenone derivatives, N-(1-oxo-1H-inden-2-yl)benzamides, via intramolecular Friedel-Crafts (IFC) reaction of (Z)-4-arylidene-2-phenyl-5(4)-oxazolones (azlactones) catalyzed by H₃PW₁₂O₄₀ supported on neutral alumina under microwave irradiation has been developed. The reaction is straightforward and allows easy isolation of the product. The catalyst could be re-used up to four times after simple filtration.     

g-C_3N_4/CaTi_2O_5复合材料制备及其光催化性能

利用类石墨氮化碳(g-C_3N_4)和亚稳相钙钛氧化物(CaTi_2O_5)固相法制备C_3N_4/CaTi_2O_5复合材料。利用X射线衍射(XRD)、金相显微镜、扫描电子显微镜(SEM)及附带能谱分析仪(EDS)和N2吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计(UV-Vis)测试了样品的光吸收性能,研究C_3N_4与CaTi_2O_5物质的量之比(nC_3N_4/nCaTi_2O_5)对C_3N_4/CaTi_2O_5复合样品的物相结构和微观形貌的影响,同时考察C_3N_4/CaTi_2O_5复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明:相比纯C_3N_4和CaTi_2O_5样品,C_3N_4/CaTi_2O_5复合样品在可见光下具有较高的光催化性能,随着nC_3N_4/nCaTi_2O_5增加,样品的光催化降解率随之增加而后降低,当nC_3N_4/nCaTi_2O_5=1∶1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

g-C3N4/CaTi2O5复合材料制备及其光催化性能

利用类石墨氮化碳（g-C₃N₄）和亚稳相钙钛氧化物（CaTi₂O₅）固相法制备C₃N₄/CaTi₂O₅复合材料。利用X射线衍射（XRD）、金相显微镜、扫描电子显微镜（SEM）及附带能谱分析仪（EDS）和N₂吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计（UV-Vis）测试了样品的光吸收性能,研究C₃N₄与CaTi₂O₅物质的量之比（n_C3N4/nCaTi₂O₅）对C₃N₄/CaTi₂O₅复合样品的物相结构和微观形貌的影响,同时考察C₃N₄/CaTi₂O₅复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明：相比纯C₃N₄和CaTi₂O₅样品,C₃N₄/CaTi₂O₅复合样品在可见光下具有较高的光催化性能,随着n_C3N4/nCaTi₂O₅增加,样品的光催化降解率随之增加而后降低,当n_C3N4/nCaTi₂O₅=1：1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

一锅法制备Co3O4/g-C3N4复合光催化剂及其光催化性能

以三聚氰胺和六水合氯化钴为原料,一锅法制备Co_3O_4负载的多孔石墨相氮化碳(Co_3O_4/g-C_3N_4)复合光催化材料。采用X射线衍射(XRD)、傅里叶变换红外(FT-IR)光谱、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、光致发光光谱(PL)等手段对其结构和光学特性进行表征。以盐酸四环素(TC)为目标污染物,评价了不同负载量Co_3O_4/g-C_3N_4复合光催化剂的可见光催化性能。结果表明,所制备的Co_3O_4/g-C_3N_4复合光催化剂为多孔结构,其比表面积较大,并在可见光区域具有显著的吸收。利用原位生成的Co_3O_4纳米粒子在氮化碳表面形成异质结构,可有效转移光生载流子,降低光生电子-空穴的再结合率,从而提高光催化活性。并且存在最佳Co_3O_4复合量,当六水合氯化钴加入量为三聚氰胺的8%(w/w)时,所制备的复合光催化剂CoCN-8具有最佳的光催化性能。在可见光的照射下,60 min内可降解85%的TC,而同样条件下,纯g-C_3N_4仅降解23%的TC。     

Synthesis and structural characterization of Al7C3N3-homeotypic aluminum silicon oxycarbonitride, (Al7−xSix)(OyCzN6−y−z) (x∼1.2, y∼1.0 and z∼3.5)

A new aluminum silicon oxycarbonitride, (Al_5.8Si_1.2)(O_1.0C_3.5N_1.5), has been synthesized and characterized by X-ray powder diffraction (XRPD), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX) and electron energy loss spectroscopy (EELS). The title compound is hexagonal with space group P6₃/mmc and unit-cell dimensions a=0.322508(4) nm, c=3.17193(4) nm and V=0.285717(6) nm³. The atom ratios of Al:Si and those of O:C:N were, respectively, determined by EDX and EELS. The initial structural model was successfully derived from the XRPD data by the direct methods and further refined by the Rietveld method. The crystal is most probably composed of four types of domains with nearly the same fraction, each of which is isotypic to Al₇C₃N₃ with space group P6₃mc. The existence of another new oxycarbonitride (Al_6.6Si_1.4)(O_0.7C_4.3N_2.0), which must be homeotypic to Al₈C₃N₄, has been also demonstrated by XRPD and TEM.     

石墨相氮化碳/二氧化锡复合材料的制备及光催化性能

采用热聚合法和水热法相结合的方法制备了g-C_3N_4/SnO_2复合光催化剂。利用XRD、SEM、TEM、FT-IR和UV-Vis DRS等多种测试手段对所得样品的物相结构、微观形貌和吸光特性等进行了表征。结果表明,异质结构复合光催化剂的最大光吸收边位置相对纯相SnO_2发生了明显的红移,并且SnO_2颗粒均匀分布于g-C_3N_4表面,其中最优组分(50%-g-C_3N_4/SnO_2)光催化降解染料罗丹明B(RhB)的效率达到了纯相g-C_3N_4的3.78倍。     

Crystal structures and magnetic properties of CeAu4Si2 and CeAu2Si2

Single crystals of CeAu₄Si₂ and CeAu₂Si₂ have been grown out of ternary fluxes rich in Au, and the former, also by sintering the stoichiometric composition at 750 °C. The single-crystal X-ray refinement result for CeAu₄Si₂ is orthorhombic, Cmmm (No. 65, Z=2), different from a tetragonal result found from an X-ray powder diffraction refinement [H. Nakashima, et al., J. Alloys Compds. 424 (2006) 7]. For CeAu₂Si₂, this is the first report of the stoichiometric crystalline phase, in the known tetragonal I4/mmm structure. The anisotropic field- and temperature-dependent magnetizations, as well as specific heat and resistivity data are compared. Although both compounds have related structural packing, they present unique magnetic features. CeAu₂Si₂ is a typical antiferromagnet with T_N=8.8(1) K and CeAu₄Si₂ features a ferromagnetic component below T_c=3.3(1) K. Both phases have effective moments close in value to that of free Ce³⁺.     

New synthesis of excellent visible-light TiO2−xNx photocatalyst using a very simple method

An excellent visible-light-responsive (from 400 to 550 nm) TiO_2−xN_x photocatalyst was prepared by a simple wet method. Hydrazine was used as a new nitrogen resource in this paper. Self-made amorphous titanium dioxide precursor powders were dipped into hydrazine hydrate, and calcined at low temperature (110 °C) in the air. The TiO_2−xN_x was successfully synthesized, following by spontaneous combustion. The photocatalyst was characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), transmission electron microscope (TEM), UV-Vis diffuse reflectance spectrometer (DRS), and X-ray photoelectron spectroscopy (XPS). Analysis of XPS indicated that N atoms were incorporated into the lattice of the titania crystal during the combustion of hydrazine on the surface of TiO₂. Ethylene was selected as a target pollutant under visible-light excitation to evaluate the activity of this photocatalyst. The newly prepared TiO_2−xN_x photocatalyst with strong photocatalytic activity and high photochemical stability under visible-light irradiation was firstly demonstrated in the experiment.     

Synthesis, structure, and magnetism of Tb4PdGa12 and Tb4PtGa12

Single crystals of Tb₄MGa₁₂ (M=Pd, Pt) have been synthesized. The isostructural compounds crystallize in the cubic space group , with Z=2 and lattice parameters: a=8.5940(5) and 8.5850(3) Å for Tb₄PdGa₁₂ and Tb₄PtGa₁₂, respectively. The crystal structure consists of corner-sharing MGa₆ octahedra and TbGa₃ cuboctahedra. Magnetic measurements suggest that Tb₄PdGa₁₂ is an antiferromagnetic metamagnet with a Néel temperature of 16 K, while the Pt analog orders at T_N=12 K.     

N-tert-Butoxycarbonylation of amines using H3PW12O40 as an efficient heterogeneous and recyclable catalyst

The commercially available heteropoly acid H₃PW₁₂O₄₀ (0.5 mol %) is a very efficient and environmentally benign catalyst for N-tert-butoxycarbonylation of amines (primary, secondary) with di-tert-butyl dicarbonate at room temperature in short reaction times (<10 min). No competitive side products such as isocyanates, ureas, N,N-di-tert-butoxycarbonyls, O-Boc and oxazolidinones were observed. Chiral α-amino alcohols and esters afforded the corresponding N-Boc derivatives chemoselectively in excellent yields.     

Regioselectivity nitration of aromatics with N2O5 in PEG-based dicationic ionic liquid

Regioselective mononitration of simple aromatic compounds has been investigated with N₂O₅ as nitrating agent and a new PEG200-based dicationic acidic ionic liquid (PEG₂₀₀-DAIL) as catalyst. The results of experiments show that this nitration system can significantly improve the para-selectivity of alkyl-benzenes and the ortho-selectivity of halogenated-benzenes. The PEG₂₀₀-DAIL exhibits recyclable temperature-dependant phase behavior in CCl₄ solvent, and it can be recycled without apparent loss of catalytic activity, and only 5% loss of weight is observed after six times recycling.     

Facile N-tert-butoxycarbonylation of amines using La(NO3)3·6H2O as a mild and efficient catalyst under solvent-free conditions

Facile N-tert-butoxycarbonylation of amines is described by the treatment of various primary, secondary, benzylic and aryl amines with di-tert-butyl dicarbonate in the presence of catalytic amounts of La(NO₃)₃·6H₂O under solvent-free conditions at room temperature to afford N-tert-butylcarbamates in excellent yields.     

Synthesis of trisubstituted alkenes by reductive dehydroxylation of Baylis-Hillman adducts using polymethylhydrosiloxane (PMHS) and catalytic B(C6F5)3

B(C₆F₅)₃ as a catalyst and polymethylhydrosiloxane as a hydride source have been employed for the reductive dehydroxylation of Baylis-Hillman adducts wherein the hydride adds in an S_N2′ manner onto the unactivated allyl alcohol moiety with concomitant elimination of the hydroxy group along with double bond migration. The products formed were found to be E in the case of ester adducts and Z in the case of nitrile adducts.     

The first quaternary lanthanide(III) nitride iodides: NaM4N2I7 (M=La-Nd)

In attempts to synthesize lanthanide(III) nitride iodides with the formula M₂NI₃ (M=La-Nd), moisture-sensitive single crystals of the first quaternary sodium lanthanide(III) nitride iodides NaM₄N₂I₇ (orthorhombic, Pna2₁; Z=4; a=1391-1401, b=1086-1094, c=1186-1211 pm) could be obtained. The dominating structural features are chains of trans-edge linked [NM₄]⁹⁺ tetrahedra, which run parallel to the polar 2₁-axis [001]. Between the chains, direct bonding via special iodide anions generates cages, in which isolated [NaI₆]^5- octahedra are embedded. The IR spectrum of NaLa₄N₂I₇ recorded from 100 to 1000 cm^-1 shows main bands at υ=337, 373 and 489 cm^-1. With decreasing radii of the lanthanide trications these bands, which can be assigned as an influence of the vibrations of the condensed [NM₄]⁹⁺ tetrahedra, are shifted toward higher frequencies for the NaM₄N₂I₇ series (M=La-Nd), following the lanthanide contraction.     

Conversion of NO in NO/N2, NO/O2/N2, NO/C2H4/N2 and NO/C2H4/O2/N2 Systems by Dielectric Barrier Discharge Plasmas

An experimental study on the conversion of NO in the NO/N₂, NO/O₂/N₂, NO/C₂H₄/N₂ and NO/C₂H₄/O₂/N₂ systems has been carried out using dielectric barrier discharge (DBD) plasmas at atmospheric pressure. In the NO/N₂ system, NO decomposition to N₂ and O₂ is the dominating reaction; NO conversion to NO₂ is less significant. O₂ produced from NO decomposition was detected by an on-line mass spectrometer. With the increase of NO initial concentration, the concentration of O₂ produced decreases at 298 K, but slightly increases at 523 K. In the NO/O₂/N₂ system, NO is mainly oxidized to NO₂, but NO conversion becomes very low at 523 K and over 1.6% of O₂. In the NO/C₂H₄/N₂ system, NO is reduced to N₂ with about the same NO conversion as that in the NO/N₂ system but without NO₂ formation. In the NO/C₂H₄/O₂/N₂ system, the oxidation of NO to NO₂ is dramatically promoted. At 523 K, with the increase of the energy density, NO conversion increases rapidly first, and then almost stabilizes at 93–91% of NO conversion with 61–55% of NO₂ selectivity in the energy density range of 317–550 J L⁻¹. It finally decreases gradually at high energy density. A negligible amount of N₂O is formed in the above four systems. Of the four systems studied, NO conversion and NO₂ selectivity of the NO/C₂H₄/O₂/N₂ system are the highest, and NO/O₂/C₂H₄/N₂ system has the lowest electrical energy consumption per NO molecule converted.     

Bi2WO6/g-C3N4复合型催化剂的制备及其可见光光催化性能

利用溶剂热法,把Bi2WO6纳米颗粒植入g-C3N4层间和表面成功地制备了Bi2WO6/g-C3N4复合型光催化剂。通过XRD、SEM、TEM、BET和UV-Vis分别对样品的结构、组成、形貌、比表面积、光学性能进行了表征。结果表明,g-C3N4层状结构被部分剥离成碎片且与Bi2WO6纳米颗粒形成了复合物。Bi2WO6/g-C3N4复合型光催化剂与单一Bi2WO6相比不仅扩展了可见光的响应范围、增大了比表面还加速了光生电子与空穴的分离。结果表明,Bi2WO6的最佳负载量为60wt%时,复合型光催化剂具有最高的可见光催化活性且性能稳定、易回收。     

Formation of crystalline TiO2−xNx and its photocatalytic activity

Amorphous precursors to nitrogen-doped TiO₂ (NTP) and pure TiO₂ (ATP) powders were synthesized by hydrolytic synthesis and sol-gel method (SGM), respectively. Corresponding crystalline phases were obtained by thermally induced transformation of these amorphous powders. From FT-IR and XPS data, it was concluded that a complex containing titanium and ammonia was formed in the precipitate stage while calcination drove weakly adsorbed ammonium species off the surface, decomposed ammonia bound on surface of precipitated powder and led to substitution of nitrogen atom into the lattice of TiO₂ during the crystallization. The activation energies required for grain growth in amorphous TiO_2−xN_x and TiO₂ samples were determined to be 1.6 and 1.7 kJ/mol, respectively. Those required for the phase transformation from amorphous to crystalline TiO_2−xN_x and TiO₂ were determined to be 129 and 142 kJ/mol, respectively. A relatively low temperature was required for the phase transformation in NTP sample than in ATP sample. The fabricated N-doped TiO₂ photocatalyst absorbed the visible light showing two absorption edges; one in UV range due to titanium oxide as the main edge and the other due to nitrogen doping as a small shoulder. TiO_2−xN_x photocatalyst demonstrated its photoactivity for photocurrent generation and decomposition of 2-propanol (IPA) under visible light irradiation ().     

Bi2WO6/g-C3N4复合型催化剂的制备及其可见光光催化性能

利用溶剂热法, 把Bi₂WO₆纳米颗粒植入g-C₃N₄层间和表面成功地制备了Bi₂WO₆/g-C₃N₄复合型光催化剂。通过XRD、SEM、TEM、BET和UV-Vis分别对样品的结构、组成、形貌、比表面积、光学性能进行了表征。结果表明, g-C₃N₄层状结构被部分剥离成碎片且与Bi₂WO₆纳米颗粒形成了复合物。Bi₂WO₆/g-C₃N₄复合型光催化剂与单一Bi₂WO₆相比不仅扩展了可见光的响应范围、增大了比表面还加速了光生电子与空穴的分离。结果表明, Bi₂WO₆的最佳负载量为60wt%时, 复合型光催化剂具有最高的可见光催化活性且性能稳定、易回收。