Synthesis of D-Mannite Esters

Mono- and diesters of D-mannite with aromatic acids are synthesized. The structures of the resulting compounds are confirmed by IR spectroscopy, PMR, and ¹³ C NMR.     

Facile Synthesis of Alkylidene Phthalides by Rhodium-Catalyzed Domino C−H Acylation/Annulation of Benzamides with Aliphatic Carboxylic Acids

The Rh-catalyzed ortho-C(sp²)−H functionalization of 8-aminoquinoline-derived benzamides with aliphatic acyl fluorides generated in situ from the corresponding acids has been developed. This reaction initiated with 8-aminoquinoline-directed ortho-C(sp²)−H acylation, which was accompanied by subsequent intramolecular nucleophilic acyl substitution of amide group to produce alkylidene phthalides This approach exhibits high stereo-selectivity for Z-isomer products, and tolerates a variety of functional groups as well as aliphatic carboxylic acids with diverse structural scaffolds.     

Sodiation as a tool for enhancing the diagnostic value of MALDI‐TOF/TOF‐MS spectra of complex astaxanthin ester mixtures from Haematococcus pluvialis

The microalga Haematococcus pluvialis produces the pigment astaxanthin mainly in esterified form with a multitude of fatty acids, which results in a complex mixture of carotenol mono‐ and diesters. For rapid fingerprinting of these esters, matrix‐assisted laser desorption ionization time of flight mass spectrometry (MALDI‐TOF/TOF‐MS) might be an alternative to traditional chromatographic separation combined with MS. Investigation of ionization and fragmentation of astaxanthin mono‐ and diester palmitate standards in MALDI‐TOF/TOF‐MS showed that sodium adduct parent masses [M + Na]⁺ gave much simpler MS² spectra than radical / protonated [M]^+● / [M + H]⁺ parents. [M + Na]⁺ fragments yielded diagnostic polyene‐specific eliminations and fatty acid neutral losses, whereas [M]^+● / [M + H]⁺ fragmentation resulted in a multitude of non‐diagnostic daughters. For diesters, a benzonium fragment, formed by polyene elimination, was required for identification of the second fatty acid attached to the astaxanthin backbone. Parents were forced into [M + Na]⁺ ionization by addition of sodium acetate, and best signal‐to‐noise ratios were obtained in the 0.1 to 1.0 mM range. This method was applied to fingerprinting astaxanthin esters in a crude H. pluvialis extract. Prior to MALDI‐TOF/TOF‐MS, the extract was fractionated by normal phase Flash chromatography to obtain fractions enriched in mono‐ and diesters and to remove pheophytin a, which compromised monoester signals. All 12 types of all‐trans esterified esters found in LC were identified with MALDI‐TOF/TOF‐MS, with the exception of two minor monoesters. Copyright © 2013 John Wiley & Sons, Ltd.     

A comparative molecular similarity index analysis (CoMSIA) study identifies an HLA-A2 binding supermotif

The 3D-QSAR CoMSIA technique was applied to a set of 458 peptides binding to the five most widespread HLA-A2-like alleles: A^*0201, A^*0202, A^*0203, A^*0206 and A^*6802. Models comprising the main physicochemical properties (steric bulk, electron density, hydrophobicity and hydrogen-bond formation abilities) were obtained with acceptable predictivity (q ² ranged from 0.385 to 0.683). The use of coefficient contour maps allowed an A2-supermotif to be identified based on common favoured and disfavoured areas. The CoMSIA definition for the best HLA-A2 binder is as follows: hydrophobic aromatic amino acid at position 1; hydrophobic bulky side chains at positions 2, 6 and 9; non-hydrogen-bond-forming amino acids at position 3; small aliphatic hydrogen-bond donors at position 4; aliphatic amino acids at position 5; small aliphatic side chains at position 7; and small aliphatic hydrophilic and hydrogen-bond forming amino acids at position 8.     

Enzyme-catalyzed synthesis of aliphatic polyesters in organic media: Study of transesterification equilibrium shift and characterization of cyclic compounds

Enzyme-catalyzed synthesis of aliphatic polyesters in organic media from methyl diesters and diols was carried out at stoechiometric ratio in the presence of supported lipases (li-pozyme^® and novozyme^®). Two systems were studied to shift the thermodynamic equilibrium which limits the conversion. In the first one, the solution flows through a molecular sieve in which methanol is adsorbed. In the second one, methanol is eliminated by nitrogen bubbling. The system with nitrogen bubbling in hydrophobic solvents at 60°C works best when novozyme^® is used as catalyst. Despite a high fractional conversion (p> 0.99), the number-average molar mass is not very high (M?;_n = 3050 eq. PS). In relation to the nature of monomers, cycles with DP = 2–20 were characterized by chromatographic analyses and mass spectrometry. Their formation explains why high polycondensates cannot be obtained. © 1995 John Wiley & Sons, Inc.     

Synthesis of diesters by addition of acids to 5-alkoxycarbonylnorborn-2-ene and related 5-methyl derivatives

The addition of saturated aliphatic acids C₁?CC₅ to 5-alkoxycarbonylnorborn-2-enes and 5-methyl-5-alkoxycarbonylnorborn-2-enes in the presence of catalyst BF₃·O(C₂H₅)₂ was studied and new representatives of the norbornane hydroxyacids diesters were synthesized.     

Selective Esterification of Phosphonic Acids

Here, we report straightforward and selective synthetic procedures for mono- and diesterification of phosphonic acids. A series of alkoxy group donors were studied and triethyl orthoacetate was found to be the best reagent as well as a solvent for the performed transformations. An important temperature effect on the reaction course was discovered. Depending on the reaction temperature, mono- or diethyl esters of phosphonic acid were obtained exclusively with decent yields. The substrate scope of the proposed methodology was verified on aromatic as well as aliphatic phosphonic acids. The designed method can be successfully applied for small- and large-scale experiments without significant loss of selectivity or reaction yield. Several devoted experiments were performed to give insight into the reaction mechanism. At 30 °C, monoesters are formed via an intermediate (1,1-diethoxyethyl ester of phosphonic acid). At higher temperatures, similar intermediate forms give diesters or stable and detectable pyrophosphonates which were also consumed to give diesters. ³¹P NMR spectroscopy was used to assign the structure of pyrophosphonate as well as to monitor the reaction course. No need for additional reagents and good accessibility and straightforward purification are the important aspects of the developed protocols.     

Gas-Chromatographic Determination of Organic Compounds in Water with the Use of Supercritical Fluid Extraction

Procedures were developed for the determination of some organic compounds (n-alkanes, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, Cl,P,N-pesticides, phthalic acid esters, chlorophenols, aliphatic acids, and methyl esters of aliphatic acids) in water on the basis of direct supercritical fluid extraction with the subsequent gas-chromatographic analysis of the entire extract without using organic solvents. The detection limits were 10^–11–10^–7% depending on the nature of the analyte.     

Direct synthesis of polyamides by N-acyl phosphoramidites

A variety of N-acyl phosphoramidites were prepared from chlorophosphites and amide derivatives, and their structures were determined with the aid of ¹H-, ¹³C-, and ³¹P-NMR, and IR spectroscopies. These phosphoramidites were employed in direct polycondensation reaction of dicarboxylic acids and diamines under various conditions resulting in polyamides with inherent viscosities of 0.1 to 1.13. The best results were obtained when aliphatic dicarboxylic acids and aromatic diamines were condensed by 2-(N-methylacetamido)-1,3,2-dioxaphospholane in nitriles.     

Synthesis of Tricyclic Diesters from 8-Acetoxytricyclodec-3-ene Monoester

Tricyclic diesters were synthesized in yields of 70.4–90.8% by the addition of С₂–С₅ monobasic carboxylic acids to tricyclo[5.2.1.0^2,6]dec-3-еn-8-yl acetate in the presence of a BF₃·OEt₂ catalyst. One of the synthesized diesters, tricyclodec-3,8-diyl diacetate, has a pleasant smell with a citrus scent and can be used in different perfume compositions as a flavoring.     

Triphenylantimony diester preparation

A series of triphenylantimony diesters of monocarboxylic acids has been prepared in a simple way by reacting triphenylantimony oxide with the corresponding acids in methanol. The antimony content was determined in the obtained compounds and the ¹H NMR spectra were measured.     

TG/DSC/FTIR characterization of linear geranyl diesters

The synthesis, thermal behavior, and characterization of the decomposition products of linear geranyl diesters: digeranyl succinate, digeranyl glutarate, digeranyl adipinate, and digeranyl sebacinate were presented. The linear geranyl diesters were prepared in direct esterification process of a molar stoichiometric ratio of geraniol and suitable acidic reagent in solvent-free medium at 130 °C using butylstannoic acid as a catalyst. Their structure was confirmed based on FTIR, ¹H- and ¹³C-NMR spectra. It was proved that the use of tin catalyst allowed decreasing the reaction time and increasing the final conversion of substrates when compared to non-catalyzed process. It considerably simplifies the processing by reduction of the preparation cost and thus this new method of synthesis of aroma diesters may be attractive for practical applications. The thermal behavior of prepared compounds was studied by TG/DSC/FTIR coupled method. TG analysis showed that diesters are thermally stable up to temperatures above 200 °C. The DTG curves confirmed that these decomposition run as a single-stage process. The T _max1 were in the range of 294.5–313.8 °C depending on the aliphatic chain length (–CH₂–)_n in the structure of aroma diesters, which was in accordance with DSC data. The analysis of the gases evolved during heating of diesters in inert atmosphere indicated on the asymmetrical disrupt of their bonds. The cleavage of ester bond and O-geranyl bond was expected. It resulted in production of the mixture of derivatives of geraniol (acyclic and alicyclic monoterpene hydrocarbons) like myrcene, ocimene, or limonene as main decomposition products. In addition, the formation of anhydride, lactone, or ketone functionalities among the degradation products clearly confirmed the proposed degradation path of studied diesters.     

Solvation Accounts for the Counterintuitive Nucleophilicity Ordering of Peroxide Anions

The nucleophilic reactivities (N , s _N) of peroxide anions (generated from aromatic and aliphatic peroxy acids or alkyl hydroperoxides) were investigated by following the kinetics of their reactions with a series of benzhydrylium ions (Ar₂CH⁺) in alkaline aqueous solutions at 20 °C. The second‐order rate constants revealed that deprotonated peroxy acids (RCO₃⁻), although they are the considerably weaker Brønsted bases, react much faster than anions of aliphatic hydroperoxides (ROO⁻). Substitution of the rate constants of their reactions with benzhydrylium ions into the linear free energy relationship lg k =s _N(N +E ) furnished nucleophilicity parameters (N , s _N) of peroxide anions, which were successfully applied to predict the rates of Weitz–Scheffer epoxidations. DFT calculations with inclusion of solvent effects by means of the Integral Equation Formalism version of the Polarizable Continuum Model were performed to rationalize the observed reactivities.     

Extended-chain polyamides: Polyoxamides and polyfumaramides

The synthesis of polyamides from short-chain aliphatic diacids, such as oxalic and fumaric acids, is difficult because of the thermal instability and volatility of the intermediates and side reactions with the polymerization media. A variety of synthetic routes to these polymers has been explored. Several aromatic polyoxamides with high molecular weight were obtained in high yield by an acid chloride vapor-solvent-water interfacial process. Polyoxamides of intermediate molecular weight also were obtained by preparation of oligomers from diamines and oxalic diesters and condensing these oligomers further in a thermal polymerization step. Aromatic polyfumaramides and terephthalamidefumaramides were prepared by modified solution procedures in amide solvents. Another route to polyfumaramides was the synthesis of N,N′-bis(4-aminophenyl) fumaramide and its use as a diamine with diacid chloride. The 1,4-phenylene and benzidine polyfumaramides and oxamides have extended-chain structures in solution in sulfuric, chlorosulfonic, and fluorosulfonic acids. Some of the polymers were soluble enough to yield liquid crystalline solutions. High-tenacity high-modulus fibers from poly(1,4-phenylene fumaramide/terephthalamide)s are described.     

Bifunctional interaction and its effect on the esterification of dicarboxylic acids in chemical ionization mass spectrometry

The chemical ionization mass spectra of different dicarboxylic acids, including saturated and unsaturated aliphatic, aromatic, hydroxyl and amino-substituted dicarboxylic acids, have been studied using pure methanol as the reagent gas. Biomolecular monoesterification and diesterification product ions [M+15]⁺ and [M+29]⁺, and adduct ion [M+33]⁺, were observed, in addition to the protonated molecule [MH]⁺ and unimolecular water elimination product ions. The formation of a protonated molecule with bridged intramolecular hydrogen bond, and its effect on the esterification of dicarboxylic acids is discussed. Geometric isomers, such as maleic and fumaric acid, and ortho and meta isomers of phthalic acids can be distinguished from each other by methanol chemical ionization mass spectra. When ethanol was used as the reagent gas, similar mass spectra of some dicarboxylic acids were obtained.     

Amino acid‐based bioanalogous polymers. Synthesis,and study of regular poly(ester amide)s based on bis(α‐amino acid) α,ω‐alkylene diesters,and aliphatic dicarboxylic acids

The purpose of this research was to synthesize new regular poly(ester amide)s (PEAs) consisting of nontoxic building blocks like hydrophobic α‐amino acids, α,ω‐diols, and aliphatic dicarboxylic acids, and to examine the effects of the structure of these building block components on some physico‐chemical and biochemical properties of the polymers. PEAs were prepared by solution polycondensation of di‐p‐toluenesulfonic acid salts of bis‐(α‐amino acid) α,ω‐alkylene diesters and di‐p‐nitrophenyl esters of diacids. Optimal conditions of this reaction have been studied. High molecular weight PEAs (M_w = 24,000–167,000) with narrow polydispersity (M_w/M_n = 1.20–1.81) were prepared under the optimal reaction conditions and exhibited excellent film‐forming properties. PEAs obtained are mostly amorphous materials with T_g from 11 to 59°C. α‐Chymotrypsin catalyzed in vitro hydrolysis of these new PEA substrates was studied to assess the effect of the building blocks of these new polymers on their biodegradation properties. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 391–407, 1999     

Conformational study of methyl esters of some aliphatic erythro- and threo-dichlorocarboxylic acids

The average conformations of methyl esters of some aliphatic erythro- and threo-dichlorocarboxylic acids in dilute carbon tetrachloride solutions have been determined from the vicinal proton–proton coupling constants and ¹H NMR shifts. The ¹³C shift differences between the erythro and threo forms are compared and discussed with regard to the differences in the average conformations.     

Synthesis and structure of pyrazolo[5,1-a]isoindol-8-ones from Aromatic Ortho Diesters

The title compounds 2 , have now been shown to arise in certain cases from condensation of aromatic ortho-diesters with ketone, where formerly only indeno[1,2-c]pyrazol-4(1H)-ones 3 have been reported from such reaction. Heretofore 2 was obtained in a less direct fashion from phthalaldehydic acid esters. When hetero-aromatic diesters were employed, new heterocyclic ring systems as represented by 2a,b ,c were prepared for the first time. Structures of 2 have been verified from detailed ¹H and ¹³C nmr studies, while representative intermediates 4–9 in the condensation of diesters to 2 have been isolated and identified.     

The Synthesis and Mechanistic Considerations of a Series of Ammonium Monosubstituted H-Phosphonate Salts

A series of ammonium monosubstituted H-phosphonate salts were synthesized by combining H-phosphonate diesters with amines in the absence of solvent at 80 °C. Variation of the ester substituent and amine produced a range of ionic liquids with low melting points. The products and by-products were analyzed by spectroscopic and spectrometric techniques in order to get a better mechanistic picture of the dealkylation and formal dearylation observed. For dialkyl H-phosphonate diesters, (RO)₂P(O)H (R=alkyl), the reaction proceeds via direct dealkylation with the reactivity increasing in the order R=iPr<Et<Me corresponding to DFT calculated activation enthalpies of 22.6, 20.8, and 17.9 kcal mol⁻¹. For the diphenyl H-phosphonate diesters, (PhO)₂P(O)H, the dearylation was found to proceed via phenol-assisted formation of a 5-coordinate intermediate, (PhO)₃PH(OH), from which P(OPh)₃ and water were eliminated. The presence of an equivalent of water then facilitated the formation of P(OH)₂OPh and the amine, R'NH₂, subsequently abstracted a proton from it to yield [(PhO)PH(O)O]^-[R'NH₃]⁺.     

Synthesis of diesters by addition of saturated carboxylic acids to tricyclodecenyl formate

Reaction of addition of C₁-C₅-saturated monobasic acids to tricyclo[5.2.1.0^2.6]dec-3-en-8(9)-yl for-mate in the presence of a catalyst, boron trifluoride etherate (BF₃·OEt₂), was used to synthesize homo- and mixed tricyclo[5.2.1.0^2.6]decane-3(4),8(9)-diol diesters. The synthesized formic-acetic and formic-propionic acid diesters have a pleasant odor and can be used as components for preparation of perfume formulations.