Membrane Transport of Pb(II) with a Cooperative Carrier Composed of Dibenzyldiaza‐18‐Crown‐6 and Palmitic Acid

A chloroform membrane system containing a given mixture of dibenzyldiaza‐18‐crown‐6 and palmetic acid was applied for transport of Pb²⁺ ions. The transport was capable of moving metal ions “uphill”. Thus, it was possible to follow the transfer of Pb(II) from the aqueous source phase to the organic layer and from the organic layer to the receiving phase. The effects of thiosulfate concentration in the receiving phase, palmetic acid and dibenzyldiaza‐18‐crown‐6 concentration in the organic phase on the efficiency of the transport system were examined. By using S₂O₃^2? ion as metal ion acceptor in the receiving phase, the amount of lead ion transport across the liquid membrane after 150 minutes is 96 ± 1.5%. The selectivity and efficiency of lead transport from aqueous solution containing Cu²⁺, Tl⁺, Ag⁺, Co²⁺, Ni²⁺, Mg²⁺, Zn²⁺, Hg²⁺, Cd²⁺, Ca²⁺ were investigated. In the presence of thiosulfate as a suitable masking agent in the source phase, the interfering effects of Ag⁺ and Cu²⁺ were diminished drastically.     

Proton-ionizable crown compounds : 5. Macrocycle-mediated proton-coupled transport of alkali metal cations in H2OCH2Cl2H2O liquid membrane systems

Alkali cation transport is studied using proton-ionizable macrocycle carriers of the 4-hydroxypyridine and pyridone types in a bulk H₂OCH₂Cl₂H₂O liquid membrane system as a function of source and receiving phase pH. A pyridone crown-6 type macrocycle containing an octyl substituent (3) transports Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺ from MOH solutions by a proton-coupled mechanism in which no co-anion is transported. In these cases, alkali cation transport increases exponentially with increasing source phase pH above pH 12. Generally, alkali cation transport at source phase pH 14 is higher when nitric acid is present (receiving pH = 1.5) than when it is absent. In competitive transport experiments with macrocycle 3 involving K⁺) and one other alkali cation M⁺, K⁺ is transported selectively over M⁺ by 4.6 (Na⁺), 2.7 (Rb⁺) and 6.3 (Cs⁺) fold when the source and receiving phase pH values are 14 and 7, respectively.     

Metal-ion recognition-competitive bulk liquid membrane transport of transition and post-transition metal cations using a thioether donor acyclic ionophore

The competitive bulk liquid membrane transport of Cr³⁺, Co²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Ag⁺ and Pb²⁺ metal cations with a new synthetic sulfur donor acyclic ligand (pseudo-cyclic ionophore), i.e. 1-(2-[(2-hydroxy-3-phenoxypropyl)sulfanyl]ethylsulfanyl)-3-phenoxy-2-propanol; (C₂₀H₂₆O₄S₂), was examined using some organic solvents as membranes. The membrane solvents include: chloroform (CHCl₃), 1,2-dichloroethane (1,2-DCE), dichloromethane (DCM), nitrobenzene (NB), chloroform-nitrobenzene (CHCl₃-NB) and chloroform-dichloromethane (CHCl₃-DCM) binary mixtures. The transport process was driven by a back flux of protons, maintained by the buffering the source and receiving phases with pH 5 and 3, respectively. The aqueous source phase consisted of a buffer solution (CH₃COOH/CH₃COONa) at pH = 5 and containing an equimolar mixture of these seven metal cations. The organic phase contained the acyclic ligand, as an ionophore and the receiving phase consisted of a buffer solution (HCOOH/HCOONa) at pH = 3. For these systems that displayed transport behaviour, sole selectivity for Ag⁺ cation was observed under the employed experimental conditions in this investigation. The amount of Ag⁺ transported follows the trend: 1,2-DCE > CHCl₃ > DCM > NB in the bulk liquid membrane studies. The transport of the metal cations in CHCl₃-NB and CHCl₃-DCM binary solvents is sensitive to the solvent composition. The influence of the stearic acid, palmitic acid and oleic acid in the membrane phase on the ion transport was also investigated.     

Specific Uphill Transport of Zinc as Zn(SCN)42− Ion using Na+-Dicyclohexyl-18-Crown-6 as Carrier

Sodium-dicyclohexyl- 18-crown-6 complex cation was used as carrier for the uphill transport of zinc as Zn(SCN)₄^2? complex anion. By using L-cysteine as a metal ion acceptor in the receiving phase at the optimized pH of 7.6, the amount of zinc transport through the liquid membrane after 90 min was 97.2 ± 1.0%. The selectivity and efficiency of zinc transport from aqueous solutions containing equimolar mixtures of Ag⁺, Cd²⁺ Co²⁺, Cu²⁺, Fe²⁺, Ni²⁺, Pb²⁺, Pd²⁺, Sr²⁺, Bi³⁺, Cr³⁺ and Fe³⁺ ions was investigated. In the presence of NH₂OH.HCl as a suitable masking agent in the source phase, the interfering effect of Cu²⁺ and Pb²⁺ ions was diminished drastically.     

Surfactant-assisted transport of lead ion through a bulk liquid membrane containing dicyclohexyl-18-crown-6: efficient removal of lead from blood serum and sea water

The selective and efficient surfactant assisted transport of Pb²⁺ ions using a bulk liquid membrane composed of dicyclohexyl-18-crown-6, as a highly selective carrier, in chloroform solution is reported. In the presence of 6.0 × 10^?2 M P₂O₇ ^4? ions and 10^?3 M sodium dodecylsulfate, as suitable stripping agent and membrane/receiving phase interface modifier, respectively, in the receiving phase and 2.4 × 10^?3 M picric acid, as a counter ion in the source phase, the amount of lead transported across the liquid membrane after 5 h is 100.0 ± 1.1. The designed transport system was successfully applied to the removal of lead from sea water and blood serum samples.     

Highly Efficient and Selective Membrane Transport of Silver(I) Using Dibenzodiaza‐15‐Crown‐4 as a Selective Ion Carrier

A chloroform membrane system containing dibenzodiaza‐15‐crown‐4 was found to be a highly efficient and selective transport of Ag⁺ ions through a chloroform liquid membrane. In the presence of thiosulfate ion as a suitable ion stripping agent in the receiving phase, the amount of silver transported across the liquid membrane after 105 minis 95 ± 1.3%. The selectivity of Ag⁺transport from aqueous solutions containing Tl⁺, Pb²⁺, Cd²⁺, Ni²⁺, Co²⁺, K⁺, Ca²⁺, Sr²⁺, Hg²⁺, Zn²⁺, Cu²⁺was investigated. The interfering effect of Cu²⁺ ions was drastically diminished in the presence of EDTA as a proper masking agent in the source phase.     

Selective and efficient liquid membrane transport of gold as gold cyanide using an anion carrier

The facilitated transport of Au(III) from cyanide solutions through a bulk liquid membrane is reported. The organic phase consisted of a chloroform solution containing Victoria blue dye as the Au(CN)⁻₄ carrier. The effects of pH of source phase, potassium cyanide concentration in source phase, Victoria blue concentration in the organic phase and sodium hydroxide in the receiving phase on the efficiency of transport process were examined. Under optimum conditions the extent of Au(CN)⁻₄ transport across the liquid membrane was about 97% after 180 min. The carrier can selectively and efficiently transport Au(CN)⁻₄ ion from the aqueous solutions containing other cations such as alkali and alkaline earth, Zn²⁺, Pb²⁺, Cu²⁺, Cd²⁺, Hg²⁺, Ag⁺, Co²⁺, Fe²⁺, Pt²⁺, Pd²⁺ and Ni²⁺.     

Synthesis and crystal structure of a new N-(2,6-dichlorobenzoyl)-N′,N″-bis(pyrrolidinyl)-phosphoric triamide as a carrier and competitive bulk liquid membrane transport of six metal cations

The competitive metal ion transport experiments of Co⁺², Cd⁺², Ag⁺, Pb⁺², Ni⁺², and Cu⁺² were carried out by N-(2,6-dichlorobenzoyl)-N′,N″-bis(pyrrolidinyl)-phosphoric triamide as a carrier in organic membrane phase. 2,6-Cl₂C₆H₃C(O)NHP(O)[NC₄H₈]₂ has been synthesized and characterized by mass spectrometry IR spectroscopy and single crystal X-ray diffraction. The asymmetric unit of title phosphoric triamide contains one symmetrically independent molecule. The source phase contained equimolar concentrations of metal ions at pH 5 and the receiving phase being buffered at pH 3. The following solvents were examined as membrane: chloroform (CHCl₃), nitrobenzene (NB), 1,2-dichloroethane (1,2-DCE), dichloromethane (DCM), dichloromethane/1,2-dichloroethane (DCM/1,2-DCE). The obtained results show that the selectivity and efficiency of transport for these heavy metal cations change with the nature of the ligand and also the organic solvents, which were used as liquid membrane in these experiments. A good selectivity was observed for Pb⁺² cation by this ligand in all membrane systems. Moreover, the selectivity of metal cations in DCM is higher than other solvents. A non-linear relationship was found between the percent of transport of Pb⁺² cation by this ligand and the compositions of DCM/1,2-DCE and binary solution by this ligand. The effect of several factors such as the nature of carboxylic acids (stearic, fumaric and maleic acid) as surfactant in the membrane phase and the time of transport on transport efficiency of Pb⁺² cation were investigated.     

Highly efficient and selective membrane transport of silver(I) using 15-crown-5 as a selective ion carrier

Selective transport of Ag⁺ cation through a nitrobenzene bulk liquid membrane with 15-crown-5 as an efficient carrier was studied. The maximum transport value of 88.02 ± 0.78% was observed for Ag⁺ ion after 8 h at Ag⁺ concentration of 4 × 10^?4 M. The selectivity and efficiency of Ag⁺ cation transport from aqueous solutions containing equimolar amounts of Cr³⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ cations were also investigated.     

Studies on the macrocycle mediated transport of some metal cations through a bulk liquid membrane system using kryptofix 22

Competitive transport experiments involving Fe⁺³, Cr⁺³, Ni⁺², Co⁺², Ca⁺², Mg⁺² and K⁺ metal cations from an aqueous source phase through some organic membranes into an aqueous receiving phase have been carried out using 4,13-diaza-18-crown-6 (kryptofix 22) as an ionophore present in the organic membrane phase. Fluxes and selectivities for competitive of the metal cations transport across bulk liquid membranes have been determined. A good selectivity was observed for K⁺ cation by kryptofix 22 in 1,2-dichloroethane (1,2-DCE) membrane system. The sequence of selectivity for potassium ion in the organic solvents was found to be: 1,2-DCE > DCM (dichloromethane) >CHCl₃. The transport of K⁺ cation was also studied in the DCM-1,2-DCE, CHCl₃-1,2-DCE and CHCl₃-DCM binary mixed solvents as membrane phase. A non-linear relationship was observed between the transport rate of K⁺ ion and the composition of these binary mixed solvents. The amount of K⁺ transported follows the trend: DCM-DCE > CHCl₃-DCE > CHCl₃-DCM in the bulk liquid membrane studies. Then, the selective transport of K⁺ cation through a DCM-1,2-DCE bulk liquid membrane was studied by kryptofix 22 as an efficient carrier. The highest transport efficiency was obtained by investigating the influence of different parameters such as the concentration of kryptofix 22 in the membrane phase, pH of the source and the receiving phases and the equilibrium time of the transport process. Maximum transport value of 71.62 ± 1.61% was observed for K⁺ ion after 4 hours, when its concentration was 4 × 10^–3 M.     

Cation transport at 25°c from binary Na+Mn+, Cs+Mn+ and Sr2+Mn+ nitrate mixtures in a H2OCHCl3H2O liquid membrane system containing a series of macrocyclic carriers

Cation fluxes from binary mixtures of either Na⁺, Cs⁺ or Sr²⁺ with other alkali metal cations, alkaline earth metal cations, and Pb²⁺ through a H₂OCHCl³H₂O bulk liquid membrane system containing one of several macrocyclic carriers have been determined Nitrate salts were used in all cases. The most selective transport of Na⁺ over all other cations studied was found with the carrier cryptand [2.2.1]. Selective transport of Na⁺ relative to Li⁺, Cs⁺ and the alkaline earth cations was found with cryptand [2.2.2B] and cryptand [2.2.2D]. The ligands 21-crown-7 and dibenzo-24-crown-8 showed selective transport of Cs⁺ over the second cation in all cases. Several macrocycles showed selectivity for Sr²⁺ over the second cation with the macrocycle 1,10-diaza-18-crown-6 showing the highest selectivity for this cation of all ligands studied. Relative fluxes from binary cation mixtures are rationalized in terms of macrocycle cavity size, donor atom type and ring substituents.     

Selective transport of copper(II) ions across a liquid membrane mediated by Piroxicam

Piroxicam was found to be a highly selective carrier for uphill transport of Cu²⁺ ions through a chloroform liquid membrane. The transport occurs via a counterflow of protons from the receiving phase to the source phase. The effects of several parameters on the transport of Cu²⁺ ions, such as the carrier concentration, pH of the source phase, composition of the receiving phase, and duration are described. A high transport efficiency (98±2%) was provided by the carrier for Cu²⁺ ions in a receiving phase of 0.01 mol l⁻¹ sulfuric acid after 4 h. Different metal ion transport experiments showed that Cu²⁺ ions were selectively transported over other ions, such as Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, UO₂²⁺ and ZrO₂²⁺. In the presence of fluoride ions (used as a suitable masking agent in the source phase), the interfering effects of UO₂²⁺ and ZrO₂²⁺ ions were eliminated. The applicability of the method was tested on a real sample, and the results obtained show that it is potentially useful for solvent extraction of copper.     

Electrochemical detection of blood lead based on the enhancement effect of copper

The anodic stripping peak current of lead on the glassy carbon electrode surface was greatly increased in the presence of high concentration of copper ion. The effects of supporting electrolyte, concentration of Cu²⁺, accumulation potential and accumulation time were studied on the stripping peak current of Pb²⁺. As a result, a sensitive, simple and rapid electrochemical method was developed for the detection of lead. In 0.01 M HNO₃ solution containing 800 g,g L^?1 Cu²⁺, the stripping peak current of Pb²⁺ increases linearly with its concentration over the range from 2 to 100 μg L^?1. The detection limit is 1 μg L^?1 after 4-min accumulation at ?0.8 V. It was used to detect the concentration of lead in blood samples, and the results consisted with the values that obtained by atomic absorption spectrometry.     

Study of Bulk Membrane Transport of Some Heavy Metal Cations Using Three Macrocyclic Ligands Containing Oxygen and Nitrogen Heteroatoms

The transport experiments of Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Ag⁺ and Pb²⁺ metal cations were carried out by dibenzo-18-crown-6 (DB18C6), dibenzyl-diaza-18-crown-6 (Dibenzyl-diaza-18C6) and di-tert-butyl-dibenzo-18-crown-6 (Di-tert-butyl-DB18C6) using chloroform (CHCl₃), 1,2-dichloroethane (1,2-DCE) and nitrobenzene (NB) organic solvents as liquid membranes. The source phase contained equimolar concentration of these metal cations and the source and receiving phases being buffered at pH=5 and pH=3, respectively. The obtained results show that the selectivity and the efficiency of transport for these heavy metal cations change with the nature of the ligand and also the organic solvents, which were used as liquid membranes in these experiments. A good selectivity was observed for silver (I) ion by dibenzyl-diaza-18C6 in all membrane systems. Dibenzo-18C6 and di-tert-butyl-DB18C6 showed the highest transport efficiency for cobalt (II) ion. The effect of stearic acid on transport efficiency was also investigated and the results show that the efficiency of transport of the heavy metal cations increases in the presence of this organic acid.     

Transport of Ca2+, Sr2+, Ba2+, Na+, K+ and Cs+ through hollow fiber supported liquid membrane

The transport of metal ions (Ca²⁺, Sr²⁺, Ba²⁺, Na⁺, K⁺, Cs⁺) through hollow fiber supported dichlorobenzene liquid membrane has been studied. The transport of cations using 8-crown-6 ether as a carrier and picrate as co-counter ion as well as a pertraction device and capillary isotachophoresis (ITP) measurement of the cation concentration is described.     

Extraction-photometric selective determination of trace perchlorates in potable waters

A method is proposed for the selective photometry determination of perchlorates in potable water with a detection limit of 2×10^?3 mg/L is proposed based on the extraction of its ion pair with the astrafloxin cation and absorbance measurements at 540 nm. The following ratios of matrix ions are acceptable (in parentheses): ClO^?, ClO ₂ ^? , ClO ₃ ^? , BrO ₃ ^? (500); I^? (1000); IO ₃ ^? (7000); HCO ₃ ^? , Cl^?,SO ₄ ^2? , NO ₃ ^? , Br^?, Na⁺, K⁺, Ca²⁺, Mg²⁺ (10000). The relative error of determination for ClO ₄ ^? is 20% in the range 4 × 10^-3-1 × 10^?2 mg/L and 10% in the range 1 × 10^-2–5 × 10^?2 mg/L.     

The oxidation of chlorine ions under the joint action of ozone and permanganate ions

The oxidation of chlorine ions in the system O₃ + MnO ₄ ^? + H⁺ + Cl^? with the formation of Cl₂ in the gas phase was studied. The phenomenon of transfer catalysis of the reaction between O₃ and Cl^? by the MnO ₄ ^? ion was observed (the products of the reduction of MnO ₄ ^? by the chlorine ion are oxidized by ozone to recover MnO ₄ ^? ). The rate of the formation of Cl₂ in the O₃ + MnO ₄ ^? + H⁺ + Cl^? system was higher than the sum of the corresponding rates in the oxidation of Cl^? by O₃ and MnO ₄ ^? separately. A scheme explaining the trends observed experimentally for the formation of Cl₂ and changes in MnO ₄ ^? concentration was suggested. The formation of MnO ₄ ^? in the oxidation of Mn³⁺ with ozone in acid media was studied.     

Selective separation of yttrium(III) through a liquid membrane system using 2-thenoyltrifluoroacetone as an extractant carrier

2-Thenoyltrifluoroacetone has been offered as a mobile carrier in organic phase for the transport and selective separation of yttrium from aqueous media using a liquid membrane system. Perceivably, the use of n-propylamine (PA) in the source phase enhances the transport of yttrium ions. The extraction and stripping conditions have entirely been evaluated and explained. The suggested method has been utilized for the separation of yttrium(III) from its binary mixtures with strontium(II) and some other cations such as Ni²⁺, Co²⁺, Ag⁺, Fe²⁺, Al³⁺, Cu²⁺, Hg²⁺and Cs⁺ in aqueous solutions of pH 5.4 in the presence of PA, while 1 M nitric acid was acting as a stripping agent in the receiving division. Cyanide ion and 5-sulfosalicylic acid have been used as masking agents to minimize the interferences from different transition metal ions and Al³⁺ in the source phase, respectively. ⁹⁰Y in secular equilibrium with ⁹⁰Sr in the source phase, was transferred to receiving phase and separated completely from its long-lived parent isotope. The activity of the transported ⁹⁰Y was found to decay with a half-life 64.17 ± 0.05 h. The purity of yttrium-90 was comparable or better than the other applied liquid membrane systems for purification of yttrium-90.     

On the metal ion selectivity of PNP-lariat ether—an insight from density functional theory calculations

The complexes of Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, and Ca²⁺ metal cations with [N₃P₃R₄O(CH₂CH₂O)₄] (R?=?H(1), NMe₂(2), NC(NMe₂)₂(3)) PNP-lariat ethers were systematically studied in the gas phase by using density functional theory (DFT) B3LYP-D3/6-311+G(3df,2p)//B3LYP/6-31+G(d,p) method. The gas phase cation affinities were calculated to span the wide range between 64.2 and 496.1 kcal mol^?1 in order K⁺?<?Na⁺?<?Li⁺?<?Ca²⁺?<?Mg²⁺?<?Be²⁺. The structural and electronic properties of 1–3 and their complexes were investigated and effects of electron-donor substituents were analyzed. The electron-donor substituents were found to promote the cation affinity. Sidearm coordinative interaction with the crown ether-complexed metal ion has been noticed. The nature of the metal–ligand interactions was investigated using Bader’s Quantum theory of atoms in molecule. It has been found that the Be²⁺–N bonds are partly covalent in nature while other coordinate bonds are of the electrostatic nature. The electron density at the bond critical points was found to be consistent with cation affinity. Natural bond orbital analysis was performed on the optimized geometries. The results showed that the stabilization interaction energies are caused by the donation of O/N lone pair electrons to the LP* orbitals of the metal cations. The amount of charge transfer follows the cation affinity order. The largest charge transfer and associated second-order perturbation stabilization energy were observed for Be²⁺ complexes.

     

Effect of Solvent on Competitive Bulk Membrane Transport of Transition and Post Transition Metal Cations Using Decyl-18-crown-6

A series of competitive metal ion transport experiments have been performed. Each involved transport from an aqueous source phase across an organic membrane phase into an aqueous receiving phase. The source phase contained equimolar concentrations of cobalt(II), nickel(II), cupper(II), zinc(II), cadmium(II), silver(I) and lead(II) metal cations. The membrane phase incorporated ionophore, decyl-18-crown-6. The membrane solvents include: chloroform, dichloromethane, 1,2-dichloroethane, nitrobenzene and chloroform–nitrobenzene binary solvents. A good transport efficiency and selectivity of Pb²⁺ transport from aqueous solutions are observed in this investigation. The selectivity order for competitive bulk liquid membrane transport of the studied transition and post transition metal cations through chloroform is: Pb²⁺>Co²⁺>Ni²⁺>Ag⁺>Cd²⁺, but in the case of dichloromethane, 1,2-dichloroethane and nitrobenzene as liquid membranes, the selectivity sequences were found to be: Pb²⁺>Co²⁺>Cd²⁺>Cu²⁺>Ag⁺>Ni²⁺>Zn²⁺, Pb²⁺>Co²⁺>Ag⁺>Ni²⁺>Zn²⁺ and Pb²⁺>Co²⁺>Ni²⁺>Zn²⁺>Cd²⁺>Ag⁺, respectively. The transport rate of the metal cations in chloroform–nitrobenzene binary solvents is sensitive to the solvent composition. The transport processes were studied in absence and presence of the stearic acid and the results show that the sequence of selectivities and ion transport rates change in the presence of stearic acid.